subroutine proces
c
c----------------------------------------------------------------------
c
c This subroutine generates the problem data and calls the solution
c  driver.
c
c
c Zdenek Johan, Winter 1991.  (Fortran 90)
c----------------------------------------------------------------------
c
        use readarrays          ! used to access x, iper, ilwork
        use turbsa          ! used to access d2wall
        use dtnmod
        use periodicity
        use pvsQbi
        include "common.h"
        include "mpif.h"
c
c arrays in the following 2 lines are now dimensioned in readnblk
c        dimension x(numnp,nsd)
c        dimension iper(nshg), ilwork(nlwork)
c
        dimension y(nshg,ndof),
     &            iBC(nshg),
     &            BC(nshg,ndofBC),
     &            ac(nshg,ndof)
c
c.... shape function declarations
c     
        dimension shp(MAXTOP,maxsh,MAXQPT),  
     &            shgl(MAXTOP,nsd,maxsh,MAXQPT), 
     &            shpb(MAXTOP,maxsh,MAXQPT),
     &            shglb(MAXTOP,nsd,maxsh,MAXQPT) 
c
c  stuff for dynamic model s.w.avg and wall model
c
c        dimension ifath(numnp),    velbar(nfath,nflow),
c     &            nsons(nfath) 

        dimension velbar(nfath,nflow)
c
c stuff to interpolate profiles at inlet
c
        real*8 bcinterp(100,ndof+1),interp_mask(ndof)
        logical exlog

c        if ((irscale .ge. 0) .and. (myrank.eq.master)) then
c           call setSPEBC(numnp, point2nfath, nsonmax)
c        endif
c     
c.... generate the geometry and boundary conditions data
c
        call gendat (y,              ac,             point2x,
     &               iBC,            BC,
     &               point2iper,     point2ilwork,   shp,
     &               shgl,           shpb,           shglb,
     &               point2ifath,    velbar,         point2nsons )
        call setper(nshg)
        call perprep(iBC,point2iper,nshg)
        if (iLES/10 .eq. 1) then
        call keeplhsG ! Allocating space for the mass (Gram) matrix to be
                      ! used for projection filtering and reconstruction
                      ! of the strain rate tensor.

        call setrls   ! Allocating space for the resolved Leonard stresses
c                         See bardmc.f 
        endif
c
c.... time averaged statistics
c
        if (ioform .eq. 2) then
           call initStats(point2x, iBC, point2iper, point2ilwork) 
        endif
c
c.... RANS turbulence model
c
        if (iRANS .lt. 0) then
           call initTurb( point2x )
        endif
c
c.... p vs. Q boundary
c
           call initNABI( point2x, shpb )
c     
c.... check for execution mode
c
        if (iexec .eq. 0) then
           lstep = 0
           call restar ('out ',  y  ,ac)
           return
        endif
c
c.... initialize AutoSponge
c
        if(matflg(5,1).ge.4) then ! cool case (sponge)
           call initSponge( y,point2x) 
        endif
c
c
c.... adjust BC's to interpolate from file
c
        
        inquire(file="inlet.dat",exist=exlog)
        if(exlog) then
           open (unit=654,file="inlet.dat",status="old")
           read(654,*) ninterp,ibcmatch,(interp_mask(j),j=1,ndof)
           do i=1,ninterp
              read(654,*) (bcinterp(i,j),j=1,ndof+1) ! distance to wall+
                        ! ndof but note order of BC's
                        ! p,t,u,v,w,scalars. Also note that must be in
                        ! increasing distance from the wall order.

           enddo
           do i=1,nshg  ! only correct for linears at this time
              if(mod(iBC(i),1024).eq.ibcmatch) then
                 iupper=0
                 do j=2,ninterp
                    if(bcinterp(j,1).gt.d2wall(i)) then !bound found
                       xi=(d2wall(i)-bcinterp(j-1,1))/
     &                    (bcinterp(j,1)-bcinterp(j-1,1))
                       iupper=j
                       exit
                    endif
                 enddo
                 if(iupper.eq.0) then
                    write(*,*) 'failure in finterp, ynint=',d2wall(i)
                    stop
                 endif
                 if(interp_mask(1).ne.zero) then 
                    BC(i,1)=(xi*bcinterp(iupper,2)
     &                +(one-xi)*bcinterp(iupper-1,2))*interp_mask(1)
                 endif
                 if(interp_mask(2).ne.zero) then 
                    BC(i,2)=(xi*bcinterp(iupper,3)
     &                +(one-xi)*bcinterp(iupper-1,3))*interp_mask(2)
                 endif
                 if(interp_mask(3).ne.zero) then 
                    BC(i,3)=(xi*bcinterp(iupper,4)
     &                +(one-xi)*bcinterp(iupper-1,4))*interp_mask(3)
                 endif
                 if(interp_masK(4).ne.zero) then 
                    BC(i,4)=(xi*bcinterp(iupper,5)
     &                +(one-xi)*bcinterp(iupper-1,5))*interp_mask(4)
                 endif
                 if(interp_mask(5).ne.zero) then 
                    BC(i,5)=(xi*bcinterp(iupper,6)
     &                +(one-xi)*bcinterp(iupper-1,6))*interp_mask(5)
                 endif
                 if(interp_mask(6).ne.zero) then 
                    BC(i,7)=(xi*bcinterp(iupper,7)
     &                +(one-xi)*bcinterp(iupper-1,7))*interp_mask(6)
                 endif
                 if(interp_mask(7).ne.zero) then 
                    BC(i,8)=(xi*bcinterp(iupper,8)
     &                +(one-xi)*bcinterp(iupper-1,8))*interp_mask(7)
                 endif
              endif
           enddo
        endif
c$$$$$$$$$$$$$$$$$$$$

c
c
c.... call the semi-discrete predictor multi-corrector iterative driver
c
        call itrdrv (y,              ac,             
     &               uold,           point2x,
     &               iBC,            BC,
     &               point2iper,     point2ilwork,   shp,
     &               shgl,           shpb,           shglb,
     &               point2ifath,    velbar,         point2nsons ) 
c
c.... return
c
c
c.... stop CPU-timer
c
CAD        call timer ('End     ')
c
c.... close echo file
c

!MR CHANGE
      if (numpe > 1) call MPI_BARRIER(MPI_COMM_WORLD, ierr)
      if(myrank.eq.0)  then
          write(*,*) 'process - before closing iecho'
      endif
!MR CHANGE END

        close (iecho)

!MR CHANGE
      if (numpe > 1) call MPI_BARRIER(MPI_COMM_WORLD, ierr)
      if(myrank.eq.0)  then
          write(*,*) 'process - after closing iecho'
      endif
!MR CHANGE END


c
c.... end of the program
c
CAD        write(6,*) 'Life: ', second(0) - ttim(100)
        deallocate(point2iper)
        if(numpe.gt.1) then
          call Dctypes(point2ilwork(1))
          deallocate(point2ilwork)
        endif
        deallocate(point2x)
        deallocate(point2nsons)
        deallocate(point2ifath)
        deallocate(uold)
        deallocate(wnrm)
        deallocate(otwn)
        call finalizeDtN
        call clearper
        call finalizeNABI

        return
        end