Difference between revisions of "PhParAdapt/Simmetrix"
From PHASTA Wiki
| Line 1: | Line 1: | ||
| − | + | The following page provides details for performing mesh adaptation using the PhParAdapt tool with Simmetrix routines. | |
| + | |||
| + | == Initial Notes to User == | ||
| + | * The solution migration feature is currently broken and thus requires other means for transferring the solution to new meshes that are created from PhParAdapt (e.g. solution interpolation in Paraview) | ||
| + | * To date, the steps described herein have only been tried with the following restrictions: | ||
| + | ** Tetrahedral elements | ||
| + | *** Extruded element types apparently can be used but require removal of any extrusion constraints in the mesh. Below are some incomplete details regarding that process for reference. | ||
| + | ** Serial case | ||
| + | ** Geometry created using SimModeler7.0-190626 | ||
| + | |||
| + | |||
| + | == Removal of Extrusion Constraint == | ||
| + | Riccardo has used a procedure in the past to remove the extrusion constraint from a mesh that enabled adaptation to be performed on extrusion-type elements. | ||
Revision as of 10:59, 28 April 2021
The following page provides details for performing mesh adaptation using the PhParAdapt tool with Simmetrix routines.
Initial Notes to User
- The solution migration feature is currently broken and thus requires other means for transferring the solution to new meshes that are created from PhParAdapt (e.g. solution interpolation in Paraview)
- To date, the steps described herein have only been tried with the following restrictions:
- Tetrahedral elements
- Extruded element types apparently can be used but require removal of any extrusion constraints in the mesh. Below are some incomplete details regarding that process for reference.
- Serial case
- Geometry created using SimModeler7.0-190626
- Tetrahedral elements
Removal of Extrusion Constraint
Riccardo has used a procedure in the past to remove the extrusion constraint from a mesh that enabled adaptation to be performed on extrusion-type elements.
