VNC

VNC is a tool which projects a GUI session over the network. If may be useful if you want to use GUI tools remotely when X forwarding performs poorly.

Warning: The vnc password is transmitted in clear text over the network and should not be considered secure

Portal1 is designated to host VNC sessions.

To start a VNC session:

 ssh jumpgate-phasta.colorado.edu
 ssh portal1
 source /etc/profile
 start_vnc.sh

Then follow the directions from start_vnc.sh. Make sure to remember your password and port number (59**) so that you can reuse your session.

It's okay to leave your VNC session running on portal1. Next time you want to access your desktop, just ssh into jumpgate with a tunnel between portal1's vnc port (59**) and some port on your machine. Then use a VNC client to connect to the port on your machine.

If, for some reason, you want to end your session and kill your virtual desktop, run

 source /etc/profile
 stop_vnc.sh     # ONLY run this if you want to kill your virtual desktop. Most users will never need to do this as the idea is to create one session and continue to use that one for all future usage.

OpenGL

Portal1 is equipped with a VirtualGL install which will allow you to use OpenGL programs (which do not use pthreads)

Simply wrap your OpenGL program with the "vglrun" command

 vlgrun glxgears

Our lab has 2 VirtualGL servers you can connect to from portal1. You must connect to one of them for large memory and/or computationally intensive processes. The names of the servers are viz002 and viz003 (viz001 is probably never coming back to life).

portal1 doesn't have a particularly fast graphics processor and MUST NOT be used for large memory or computationally intensive process)

 vglconnect -s  viz002

or

 vglconnect -s viz003

from this connection you will want to run graphic applications (e.g., SimModeler or ParaView) prefaced by the command vglrun. You can test that you have it setup right with the toyapp glxgears as follows

 vglrun glxgears

Note that VGL uses a number of threads. If you have trouble with vglrun crashing with a message about Thread::Start() make sure you haven't set your stack size too large (remove any ulimit -s or ulimit -n calls from your shell start scripts).

NOTE ALSO: The primary purpose for viz003 is for visualization and for debugging. Production runs should be done elsewhere.

Clients

Portal1 uses TurboVNC from the VirtualGL project, available from http://www.virtualgl.org/Downloads/TurboVNC

Other VNC viewers will also work, such as TightVNC and RealVNC

Changing the VNC Password

 /opt/tigervnc/bin/vncpasswd

View Only Mode

To share your desktop with another user in view only mode set a view only password by running

 vncpasswd

Have the other user connect in the same way you would but have them set their viewer to be in view only mode and use your view only password. Typically this is done as follows:

 vncviewer -viewonly

Mac of Linux

The instructions given when you started the session on portal1 are OK but it always tells you

ssh -L5905:portal1:59zw jumpgate-phasta.colorado.edu

where zw will be different for each user (actually each session created but we are hoping for only one per user please :> ). That suggestion is OK if you never plan to connect to anyone else's session but since we often collaborate but sharing VNC sessions, the better practice we adopt is to use zw in pl place of the suggested 05 (the 05 is just the local port on your laptop so it can be anything but its easier to remember which port is which if you always give them the same number and there is no chance of giving two VNC's the same number accidentally with this practice). So if when I created a session the last for numbers were 5923 then zw for me is 23 and the best practice is to ignore the script suggestion in favor of

ssh -L5923:portal1:5923 jumpgate-phasta.colorado.edu

Windows

The PuTTY SSH client can handle ssh tunneling on Windows based machines. You can download it here: http://www.chiark.greenend.org.uk/~sgtatham/putty/

When you open putty, enter jumpgate-phasta.colorado.edu in the Host Name box. Then click the + button next to SSH on the left pane (to expand the SSH tree node). Choose the Tunnels page. The start_vnc.sh script should tell you to run "ssh -L59xy:portal1:59zw jumpgate-phasta.colorado.edu" on your machine. Those instructions are OK but a better practice is to ignore what that script suggested for xy (it always suggests 05 currently) and instead use "ssh -L59zw:portal1:59zw jumpgate-phasta.colorado.edu" where zw varies for each new session created. If you get 23 that just means there were 22 sessions created before you created this one but the plan is for you to keep using 23 for a long time (usually until the machine gets rebooted which can be a year or more in some cases). Enter 59zw in the "Source port" box. Enter portal1:59zw in the Destination box (starting and click the add button. Putty is a little strange about saving the session which you want to do to avoid having to do all the above every time you re-connect. BEFORE you click the Open button, you want to name your session (your choice) and click save. Then in the future when you start putty you should be able to just click that saved session name and click load. Then click "Open" and login as normal. You will then be able to use a vncviewer as instructed by the script.

Example:

The script says: ssh -L5905:portal1:5923 jumpgate-phasta.colorado.edu your "zw" from the instructions above is 23 enter 5923 in the Source port box enter portal1:5923 in the destination box.

Try using this viewer utility http://www.tightvnc.com/download/1.3.10/tightvnc-1.3.10_x86_viewer.zip

Connecting to your VNC with PuTTY

Once we SSH to jumpgate (on the default SSH port 22), our main desktop on portal1 can be accessed via a VNC session as follows.

1. The VNC server should already be running on portal1 using port 59zw.
   1. To check the port, on portal1 run /opt/vnc_script/findsession.sh
   2. To confirm the VNC server is running (and see port), run ps aux | grep vnc
2. Open PuTTY on your local machine.
3. Under "Session", SSH to x@jumpgate-phasta.colorado.edu:22, where x is your username on jumpgate, and 22 is the standard SSH port.
4. Under "Session">"SSH">"Tunnels", select source port 59xx and destination port portal1:59xx, where xx is the two-digit number of your VNC session. Select destination local and click "Add". We select local because we have a service (VNC Server) running on a machine (portal1) that can be reached from the remote machine (jumpgate), and we want to access it directly from the local machine.
5. Confirm the dialog by clicking "Open", thus establishing an SSH connection between localhost and jumpgate, and tunneling localhost:59xx to portal1:59xx via this connection.
6. Open RealVNC, and connect to localhost:xx, which is shorthand for localhost:59xx. VNC ports are enumerated starting with 5901, so any two digit port xx is assumed to be port 59xx.
7. You should now have access to your desktop on portal1. DON'T FORGET-- no meshing, solving, postprocessing, EVEN MATLAB on portal1. To run memory and/or processor and/or graphics intensive jobs you need to create a terminal and type vglconnect -s viz00x where, at this time x =2, or 3.

Web Based Viewer

If you can't or don't want to install a VNC viewer you can use a Java based one. You will need a JVM and a Java browser plugin. You will also need the port that the start_vnc script assigned you to be free on your local computer

Forward your session through jumpgate as before before, adding a second port, 580n. For example, if the script tells you to

ssh -L5905:portal1:5902 jumpgate-phasta.colorado.edu you should

 ssh -L5902:portal1:5902 -L5802:portal1:5802 jumpgate-phasta.colorado.edu

Then point your browser to http://localhost:5802 and log in with the password specified by the script when prompted. (Replace 2 with the value specified by the script)

Changing the Size (Resolution) of an Existing Session

You can usually use the "xrandr" tool to change the resolution of a running vnc session. First you'll need to know your session's display number (this should be the last digit or two of the port number). For example, if your VNC session is running on port 5902, then your screen number should be :2. For this example, we'll use screen 2.

Once you know your screen number, you can see the list of supported modes as follows:

 xrandr -display :2

Once you pick the one you want (generally the same size or smaller than the native resolution of your client), you can choose it by running a command like

 xrandr -s 1400x1050 -display :2

(this example will set the resolution to 1400 pixels by 1050 pixels)

You'll probably be disconnected at this point, but when you reconnect your screen size should be changed (hopefully without crashing your running programs).

Finding an Existing Session

SSH to portal1 and then run:

 /opt/vnc_script/findsession.sh

Which will return the shortened port number of each of your currently running sessions.

Troubleshooting

If you have used vncserver (It doesn't matter which version) on a SCOREC machine before, you will need to clear your vnc settings for the script to work. You can do this by running rm -rf ~/.vnc

stop_vnc.sh may display some errors; this is normal.

If you have trouble deleting ~/.vnc send an email to Benjamin.A.Matthews@colorado.edu

If any of these commands fail, you may need to source /etc/profile to get the necessary environment variables (this should be fixed soon)

VirtualGL has trouble with some threaded programs. If your OpenGL program exhibits segmentation faults or other issues, this could be the problem. Check back for the solution later.

If the given password is rejected you can run stop_vnc.sh and restart to get a new one. Occasionally the random password generator may generate passwords which VNC doesn't like.

If VirtualGL complains about not being able to get a 24bit FB config either vglconnect to another VirtualGL enabled server or complain to Benjamin.A.Matthews@Colorado.edu

If your VNC connection is very slow, you might want to try changing the compression and encoding options. See your vncviewer's documentation or try this

 vncviewer -encodings tight -quality 6 -compresslevel 6

If you have trouble with text distortion try adding

 -nojpeg

If you're running OSX and see an error about Zlib, try changing your compression settings (maximum quality usually works) or use a different client. RealVNC and certain versions of ChickenOfTheVNC both exhibit this issue. The latest build of TigerVNC should work reliably, as does the Java based TightVNC client.