Phasta Meshing

From PHASTA Wiki
Revision as of 19:52, 19 January 2012 by Jema6380 (talk | contribs)
Jump to: navigation, search

Start

  • To begin, we need a geometry model. It can be created using commercial softwares such as Solid Work and saved as *.x_t
  • You need the BLMesher code which is available on svn:
  svn co https://redmine.scorec.rpi.edu/svn/phasta/BLMesher
  • If you have read only access to phasta project on redmine, then use:
 svn co https://redmine.scorec.rpi.edu/anonsvn/phasta/BLMesher
Retrieved from "https://fluid.colorado.edu/wiki/index.php?title=Phasta_Meshing&oldid=149"