Lines Matching refs:file
79 - Number of frames written per CGNS file if the CGNS file name includes a format specifier (`%d`).
107 - Path to solution binary file from which to continue from
111 - Path to time stamp binary file (only for legacy checkpoints)
155 …- Sets the PetscViewer for the statistics file writing, such as `cgns:output-%d.cgns` (requires PE…
159 - Number of timesteps between statistics file writing (`-1` means only at end of run)
163 - Number of frames written per CGNS file if the CGNS file name includes a format specifier (`%d`).
167 …- Viewer for the force on each no-slip wall, e.g., `ascii:force.csv:ascii_csv` to write a CSV file.
722 This problem can be run with the `gaussianwave.yaml` file via:
776 The above run writes a file named `force.csv` (see `ts_monitor_wall_force` in `vortexshedding.yaml`…
873 This problem can be run with the `channel.yaml` file via:
947 - Path to file with y node locations. If empty, will use mesh warping instead.
968 This problem can be run with the `blasius.yaml` file via:
991 - Path to the STGInflow file
996 - Path to the STGRand file
1037 This problem can be run with the `blasius.yaml` file via:
1044 This overrides the `stg: use: false` setting in the `blasius.yaml` file, enabling the use of the ST…