Lines Matching refs:boundary

102 where $\bm{F}(\bm q_N) \cdot \widehat{\bm{n}}$ is typically replaced with a boundary condition.
225 To build intuition, consider a boundary layer element of dimension $(1, \epsilon)$, for which $\nab…
446 The boundary integral resulting from integration-by-parts is crossed out, as we assume that $(\bm{D…
486 The filtering at the wall may also be damped, to smoothly meet the $\overline \phi = \phi$ boundary…
540 …For the inflow boundary conditions, a prescribed $E_{wind}$ is applied weakly on the inflow bounda…
546 …boundary conditions, we have used the current values of $E$, following {cite}`papanastasiou1992out…
547 …The weak form boundary integral in {eq}`eq-weak-vector-ns` for outflow boundary conditions is defi…
580 …elocity is zero in both sections. Symmetry boundary conditions are applied to the side walls and w…
617 …galdoCompressibleBC2014`. It is intended to test non-reflecting/Riemann boundary conditions. It's …
632 …boundary conditions are freestream in the x and y directions. When using an HLL (Harten, Lax, van …
641 At time $t=0$, this domain is subjected to freestream boundary conditions at the inflow (left) and …
643 The cylinder wall is an adiabatic (no heat flux) no-slip boundary condition.
647 …l shedding frequency) is sensitive to the size of the computational domain and boundary conditions.
671 For this problem, we have used no-slip and non-penetration boundary conditions for $\bm{u}$, and no…
684 …e periodic in the streamwise direction, and no-slip and non-penetration boundary conditions at the…
691 Simulation of a laminar boundary layer flow, with the inflow being prescribed
705 Simulating a turbulent boundary layer without modeling the turbulence requires
707 into the simulations either by allowing a laminar boundary layer naturally
774 The enforcement of the boundary condition is identical to the blasius inflow;
867 The STG inflow boundary condition creates large amplitude acoustic waves.
882 The flat plate boundary layer example has custom meshing features to better resolve the flow when u…
884 One of those is tilting the top of the domain, allowing for it to be a outflow boundary condition.
891 linearly stretched/squeezed to match the slanted top boundary condition. Nodes
902 stretched/squeezed to match the slanted top boundary condition. The file is