Lines Matching refs:wall

486 The filtering at the wall may also be damped, to smoothly meet the $\overline \phi = \phi$ boundary…
493 where $y^+$ is the wall-friction scaled wall-distance ($y^+ = y u_\tau / \nu = y/\delta_\nu$), $A^+…
494 For this implementation, we assume that $\delta_\nu$ is constant across the wall and is defined by …
497 To apply this scalar damping coefficient to the filter width tensor, we construct the wall-damping …
498 The construction implemented currently limits damping in the wall parallel directions to be no less…
499 The wall-normal filter width is allowed to be damped to a zero filter width.
500 It is currently assumed that the second component of the filter width tensor is in the wall-normal …
580 … sections. Symmetry boundary conditions are applied to the side walls and wall boundary conditions…
643 The cylinder wall is an adiabatic (no heat flux) no-slip boundary condition.
682 …eight, $u_{\max}$ is the center velocity, $T_w$ is the temperature at the wall, $Pr=\frac{\mu}{c_p…
698 flux terms use interior solution values). The wall is a no-slip,
742 nearest wall.
831 The `STGInflow.dat` file is a table of values at given distances from the wall.
888 resolution near the wall. There are two methods to do this; algorithmically, or
893 `-platemesh_refine_height` of the wall. They are placed such that the element