1C Copyright (c) 2017, Lawrence Livermore National Security, LLC. Produced at 2C the Lawrence Livermore National Laboratory. LLNL-CODE-734707. All Rights 3C reserved. See files LICENSE and NOTICE for details. 4C 5C This file is part of CEED, a collection of benchmarks, miniapps, software 6C libraries and APIs for efficient high-order finite element and spectral 7C element discretizations for exascale applications. For more information and 8C source code availability see http://github.com/ceed. 9C 10C The CEED research is supported by the Exascale Computing Project (17-SC-20-SC) 11C a collaborative effort of two U.S. Department of Energy organizations (Office 12C of Science and the National Nuclear Security Administration) responsible for 13C the planning and preparation of a capable exascale ecosystem, including 14C software, applications, hardware, advanced system engineering and early 15C testbed platforms, in support of the nation's exascale computing imperative. 16 17C> @file 18C> Mass and diffusion operators examples using Nek5000 19C TESTARGS -c {ceed_resource} -e bp1 -n 1 -b 4 -test 20 21C----------------------------------------------------------------------- 22 subroutine masssetupf(ctx,q,u1,u2,u3,u4,u5,u6,u7, 23 $ u8,u9,u10,u11,u12,u13,u14,u15,u16,v1,v2,v3,v4,v5,v6,v7,v8, 24 $ v9,v10,v11,v12,v13,v14,v15,v16,ierr) 25C Set up mass operator 26C Input: u1,u2,u3,q Output: v1,v2,ierr 27 integer q,ierr 28 real*8 ctx(1) 29 real*8 u1(3*q) 30 real*8 u2(9*q) 31 real*8 u3(q) 32 real*8 v1(q) 33 real*8 v2(q) 34 real*8 a11,a12,a13,a21,a22,a23,a31,a32,a33 35 real*8 g11,g12,g13,g21,g22,g23,g31,g32,g33 36 real*8 jacmq 37 38C Quadrature Point Loop 39 do i=1,q 40 a11=u2(i+q*0) 41 a12=u2(i+q*3) 42 a13=u2(i+q*6) 43 44 a21=u2(i+q*1) 45 a22=u2(i+q*4) 46 a23=u2(i+q*7) 47 48 a31=u2(i+q*2) 49 a32=u2(i+q*5) 50 a33=u2(i+q*8) 51 52 g11 = (a22*a33-a23*a32) 53 g12 = (a13*a32-a33*a12) 54 g13 = (a12*a23-a22*a13) 55 56 g21 = (a23*a31-a21*a33) 57 g22 = (a11*a33-a31*a13) 58 g23 = (a13*a21-a23*a11) 59 60 g31 = (a21*a32-a22*a31) 61 g32 = (a12*a31-a32*a11) 62 g33 = (a11*a22-a21*a12) 63 64 jacmq = a11*g11+a21*g12+a31*g13 65 66C Rho 67 v1(i)=u3(i)*jacmq 68 69C RHS 70 v2(i)=u3(i)*jacmq 71 $ *dsqrt(u1(i+q*0)*u1(i+q*0) 72 $ +u1(i+q*1)*u1(i+q*1) 73 $ +u1(i+q*2)*u1(i+q*2)) 74 enddo 75 76 ierr=0 77 end 78C----------------------------------------------------------------------- 79 subroutine massf(ctx,q,u1,u2,u3,u4,u5,u6,u7, 80 $ u8,u9,u10,u11,u12,u13,u14,u15,u16,v1,v2,v3,v4,v5,v6,v7,v8, 81 $ v9,v10,v11,v12,v13,v14,v15,v16,ierr) 82C Apply mass operator 83C Input: u1,u2,q Output: v1,ierr 84 integer q,ierr 85 real*8 ctx(1) 86 real*8 u1(q) 87 real*8 u2(q) 88 real*8 v1(q) 89 90C Quadrature Point Loop 91 do i=1,q 92 v1(i)=u2(i)*u1(i) 93 enddo 94 95 ierr=0 96 end 97C----------------------------------------------------------------------- 98 subroutine diffsetupf(ctx,q,u1,u2,u3,u4,u5,u6,u7, 99 $ u8,u9,u10,u11,u12,u13,u14,u15,u16,v1,v2,v3,v4,v5,v6,v7,v8, 100 $ v9,v10,v11,v12,v13,v14,v15,v16,ierr) 101C Set up diffusion operator 102C Input: u1,u2,u3,q Output: v1,v2,ierr 103 integer q,ierr 104 real*8 ctx(1) 105 real*8 u1(3*q) 106 real*8 u2(9*q) 107 real*8 u3(q) 108 real*8 v1(6*q) 109 real*8 v2(q) 110 real*8 a11,a12,a13,a21,a22,a23,a31,a32,a33 111 real*8 g11,g12,g13,g21,g22,g23,g31,g32,g33 112 real*8 jacmq,scl 113 real*8 c(3),k(3) 114 115C Quadrature Point Loop 116 do i=1,q 117 pi = 3.14159265358979323846 118 119 c(1)=0. 120 c(2)=1. 121 c(3)=2. 122 k(1)=1. 123 k(2)=2. 124 k(3)=3. 125 126 a11=u2(i+q*0) 127 a12=u2(i+q*3) 128 a13=u2(i+q*6) 129 130 a21=u2(i+q*1) 131 a22=u2(i+q*4) 132 a23=u2(i+q*7) 133 134 a31=u2(i+q*2) 135 a32=u2(i+q*5) 136 a33=u2(i+q*8) 137 138 g11 = (a22*a33-a23*a32) 139 g12 = (a13*a32-a33*a12) 140 g13 = (a12*a23-a22*a13) 141 142 g21 = (a23*a31-a21*a33) 143 g22 = (a11*a33-a31*a13) 144 g23 = (a13*a21-a23*a11) 145 146 g31 = (a21*a32-a22*a31) 147 g32 = (a12*a31-a32*a11) 148 g33 = (a11*a22-a21*a12) 149 150 jacmq = a11*g11+a21*g12+a31*g13 151 152 scl = u3(i)/jacmq 153 154C Geometric factors 155C Stored in Voigt convention 156C 0 5 4 157C 5 1 3 158C 4 3 2 159 v1(i+0*q) = scl*(g11*g11+g12*g12+g13*g13) ! Grr 160 v1(i+1*q) = scl*(g21*g21+g22*g22+g23*g23) ! Gss 161 v1(i+2*q) = scl*(g31*g31+g32*g32+g33*g33) ! Gtt 162 v1(i+3*q) = scl*(g21*g31+g22*g32+g23*g33) ! Gst 163 v1(i+4*q) = scl*(g11*g31+g12*g32+g13*g33) ! Grt 164 v1(i+5*q) = scl*(g11*g21+g12*g22+g13*g23) ! Grs 165 166C RHS 167 v2(i) = u3(i)*jacmq*pi*pi 168 $ *dsin(pi*(c(1)+k(1)*u1(i+0*q))) 169 $ *dsin(pi*(c(2)+k(2)*u1(i+1*q))) 170 $ *dsin(pi*(c(3)+k(3)*u1(i+2*q))) 171 $ *(k(1)*k(1)+k(2)*k(2)+k(3)*k(3)) 172 173 enddo 174 175 ierr=0 176 end 177C----------------------------------------------------------------------- 178 subroutine diffusionf(ctx,q,u1,u2,u3,u4,u5,u6,u7, 179 $ u8,u9,u10,u11,u12,u13,u14,u15,u16,v1,v2,v3,v4,v5,v6,v7,v8, 180 $ v9,v10,v11,v12,v13,v14,v15,v16,ierr) 181C Apply diffusion operator 182C Input: u1,u2,q Output: v1,ierr 183 integer q,ierr 184 real*8 ctx(1) 185 real*8 u1(3*q) 186 real*8 u2(6*q) 187 real*8 v1(3*q) 188 189C Quadrature Point Loop 190 do i=1,q 191 v1(i+0*q)= 192 $ u2(i+0*q)*u1(i)+u2(i+5*q)*u1(i+q)+u2(i+4*q)*u1(i+2*q) 193 v1(i+1*q)= 194 $ u2(i+5*q)*u1(i)+u2(i+1*q)*u1(i+q)+u2(i+3*q)*u1(i+2*q) 195 v1(i+2*q)= 196 $ u2(i+4*q)*u1(i)+u2(i+3*q)*u1(i+q)+u2(i+2*q)*u1(i+2*q) 197 enddo 198 199 ierr=0 200 end 201C----------------------------------------------------------------------- 202 subroutine set_h2_as_rhoJac_GL(h2,bmq,nxq) 203C Set h2 as rhoJac 204C Input: bmq,nxq Output: h2 205 include 'SIZE' 206 real*8 h2(1),bmq(1) 207 208 common /ctmp77/ wd(lxd),zd(lxd) 209 integer e,i,L 210 211 call zwgl(zd,wd,nxq) ! nxq = number of points 212 213 q = 1.0 ! Later, this can be a function of position... 214 215 L = 0 216 do e=1,lelt 217 do i=1,nxq**ldim 218 L=L+1 219 h2(L) = q*bmq(L) 220 enddo 221 enddo 222 223 return 224 end 225C----------------------------------------------------------------------- 226 subroutine dist_fld_h1(e) 227C Set distance initial condition for BP1 228C Input: Output: e 229 include 'SIZE' 230 include 'TOTAL' 231 real*8 x,y,z 232 real*8 e(1) 233 234 n=lx1*ly1*lz1*nelt 235 236 do i=1,n 237 x=xm1(i,1,1,1) 238 y=ym1(i,1,1,1) 239 z=zm1(i,1,1,1) 240 241 e(i) = dsqrt(x*x+y*y+z*z) 242 enddo 243 244 call dsavg(e) ! This is requisite for random fields 245 246 return 247 end 248C----------------------------------------------------------------------- 249 subroutine sin_fld_h1(e) 250C Set sine initial condition for BP3 251C Input: Output: e 252 include 'SIZE' 253 include 'TOTAL' 254 real*8 x,y,z 255 real*8 e(1) 256 real*8 c(3),k(3) 257 258 n=lx1*ly1*lz1*nelt 259 pi = 3.14159265358979323846 260 261 c(1)=0. 262 c(2)=1. 263 c(3)=2. 264 k(1)=1. 265 k(2)=2. 266 k(3)=3. 267 268 do i=1,n 269 x=xm1(i,1,1,1) 270 y=ym1(i,1,1,1) 271 z=zm1(i,1,1,1) 272 273 e(i) = dsin(pi*(c(1)+k(1)*x)) 274 & *dsin(pi*(c(2)+k(2)*y)) 275 & *dsin(pi*(c(3)+k(3)*z)) 276 277 enddo 278 279 call dsavg(e) ! This is requisite for random fields 280 281 return 282 end 283C----------------------------------------------------------------------- 284 subroutine uservp(ix,iy,iz,eg) ! set variable properties 285 include 'SIZE' 286 include 'TOTAL' 287 include 'NEKUSE' 288 integer e,f,eg 289C e = gllel(eg) 290 291 udiff = 0.0 292 utrans = 0.0 293 294 return 295 end 296C----------------------------------------------------------------------- 297 subroutine userf(ix,iy,iz,eg) ! set acceleration term 298C 299C Note: this is an acceleration term, NOT a force! 300C Thus, ffx will subsequently be multiplied by rho(x,t). 301C 302 include 'SIZE' 303 include 'TOTAL' 304 include 'NEKUSE' 305 integer e,f,eg 306C e = gllel(eg) 307 308 ffx = 0.0 309 ffy = 0.0 310 ffz = 0.0 311 312 return 313 end 314C----------------------------------------------------------------------- 315 subroutine userq(i,j,k,eg) ! set source term 316 include 'SIZE' 317 include 'TOTAL' 318 include 'NEKUSE' 319 integer e,f,eg 320 e = gllel(eg) 321 322 qvol = 0 323 324 return 325 end 326C----------------------------------------------------------------------- 327 subroutine userbc(ix,iy,iz,f,eg) ! set up boundary conditions 328C NOTE ::: This subroutine MAY NOT be called by every process 329 include 'SIZE' 330 include 'TOTAL' 331 include 'NEKUSE' 332 integer e,f,eg 333 334 ux = 0.0 335 uy = 0.0 336 uz = 0.0 337 temp = 0.0 338 339 return 340 end 341C----------------------------------------------------------------------- 342 subroutine useric(ix,iy,iz,eg) ! set up initial conditions 343 include 'SIZE' 344 include 'TOTAL' 345 include 'NEKUSE' 346 integer e,f,eg 347 348 ux = 0.0 349 uy = 0.0 350 uz = 0.0 351 temp = 0.0 352 353 return 354 end 355C----------------------------------------------------------------------- 356 subroutine usrdat ! This routine to modify element vertices 357 include 'SIZE' 358 include 'TOTAL' 359 360 return 361 end 362C----------------------------------------------------------------------- 363 subroutine usrdat2 ! This routine to modify mesh coordinates 364 include 'SIZE' 365 include 'TOTAL' 366 367 x0 = 0 368 x1 = 1 369 call rescale_x(xm1,x0,x1) 370 call rescale_x(ym1,x0,x1) 371 call rescale_x(zm1,x0,x1) 372 373 param(59)=1 ! Force Nek to use the "deformed element" formulation 374 375 return 376 end 377C----------------------------------------------------------------------- 378 subroutine usrdat3 379 include 'SIZE' 380 include 'TOTAL' 381 382 return 383 end 384C----------------------------------------------------------------------- 385 subroutine xmask1 (r1,h2,nel) 386C Apply zero Dirichlet boundary conditions 387C Input: h2,nel Output: r1 388 include 'SIZE' 389 include 'TOTAL' 390 real*8 r1(1),h2(1) 391 392 n=nx1*ny1*nz1*nel 393 do i=1,n 394 r1(i)=r1(i)*h2(i) 395 enddo 396 397 return 398 end 399C----------------------------------------------------------------------- 400 function glrdif(x,y,n) 401C Compute Linfty norm of (x-y) 402C Input: x,y Output: n 403 real*8 x(n),y(n) 404 405 dmx=0 406 xmx=0 407 ymx=0 408 409 do i=1,n 410 diff=abs(x(i)-y(i)) 411 dmx =max(dmx,diff) 412 xmx =max(xmx,x(i)) 413 ymx =max(ymx,y(i)) 414 enddo 415 416 xmx = max(xmx,ymx) 417 dmx = glmax(dmx,1) ! max across processors 418 xmx = glmax(xmx,1) 419 420 if (xmx.gt.0) then 421 glrdif = dmx/xmx 422 else 423 glrdif = -dmx ! Negative indicates something strange 424 endif 425 426 return 427 end 428C----------------------------------------------------------------------- 429 subroutine loc_grad3(ur,us,ut,u,N,D,Dt) 430C 3D transpose of local gradient 431C Input: u,N,D,Dt Output: ur,us,ut 432 real*8 ur(0:N,0:N,0:N),us(0:N,0:N,0:N),ut(0:N,0:N,0:N) 433 real*8 u (0:N,0:N,0:N) 434 real*8 D (0:N,0:N),Dt(0:N,0:N) 435 436 m1 = N+1 437 m2 = m1*m1 438 439 call mxm(D ,m1,u(0,0,0),m1,ur,m2) 440 do k=0,N 441 call mxm(u(0,0,k),m1,Dt,m1,us(0,0,k),m1) 442 enddo 443 call mxm(u(0,0,0),m2,Dt,m1,ut,m1) 444 445 return 446 end 447c----------------------------------------------------------------------- 448 subroutine loc_grad3t(u,ur,us,ut,N,D,Dt,w) 449C 3D transpose of local gradient 450C Input: ur,us,ut,N,D,Dt Output: u 451 real*8 u (0:N,0:N,0:N) 452 real*8 ur(0:N,0:N,0:N),us(0:N,0:N,0:N),ut(0:N,0:N,0:N) 453 real*8 D (0:N,0:N),Dt(0:N,0:N) 454 real*8 w (0:N,0:N,0:N) 455 456 m1 = N+1 457 m2 = m1*m1 458 m3 = m1*m1*m1 459 460 call mxm(Dt,m1,ur,m1,u(0,0,0),m2) 461 do k=0,N 462 call mxm(us(0,0,k),m1,D ,m1,w(0,0,k),m1) 463 enddo 464 call add2(u(0,0,0),w,m3) 465 call mxm(ut,m2,D ,m1,w,m1) 466 call add2(u(0,0,0),w,m3) 467 468 return 469 end 470C----------------------------------------------------------------------- 471 subroutine geodatq(gf,bmq,w3mq,nxq) 472C Routine to generate elemental geometric matrices on mesh 1 473C (Gauss-Legendre Lobatto mesh). 474 include 'SIZE' 475 include 'TOTAL' 476 477 parameter (lg=3+3*(ldim-2),lzq=lx1+1,lxyd=lzq**ldim) 478 479 real*8 gf(lg,nxq**ldim,lelt),bmq(nxq**ldim,lelt),w3mq(nxq,nxq,nxq) 480 481 common /ctmp1/ xr(lxyd),xs(lxyd),xt(lxyd) 482 common /sxrns/ yr(lxyd),ys(lxyd),yt(lxyd) 483 $ , zr(lxyd),zs(lxyd),zt(lxyd) 484 485 common /ctmp77/ wd(lxd),zd(lxd) 486 common /dxmfine/ dxmq(lzq,lzq),dxtmq(lzq,lzq) 487 488 integer e 489 real*8 tmp(lxyd) 490 real*8 a11,a12,a13,a21,a22,a23,a31,a32,a33 491 real*8 g11,g12,g13,g21,g22,g23,g31,g32,g33 492 real*8 jacmq 493 494 if (nxq.gt.lzq) call exitti('ABORT: recompile with lzq=$',nxq) 495 496 call zwgl (zd,wd,lzq) ! nxq = number of points 497 call gen_dgl (dxmq,dxtmq,lzq,lzq,tmp) 498 499 do k=1,nxq 500 do j=1,nxq 501 do i=1,nxq 502 w3mq(i,j,k) = wd(i)*wd(j)*wd(k) 503 enddo 504 enddo 505 enddo 506 507 nxyzq = nxq**ldim 508 nxqm1 = lzq-1 509 510 do e=1,nelt 511 call intp_rstd (tmp,xm1(1,1,1,e),lx1,lzq,if3d,0) ! 0-->Fwd interpolation 512 call loc_grad3 (xr,xs,xt,tmp,nxqm1,dxmq,dxtmq) 513 514 call intp_rstd (tmp,ym1(1,1,1,e),lx1,lzq,if3d,0) 515 call loc_grad3 (yr,ys,yt,tmp,nxqm1,dxmq,dxtmq) 516 517 call intp_rstd (tmp,zm1(1,1,1,e),lx1,lzq,if3d,0) 518 call loc_grad3 (zr,zs,zt,tmp,nxqm1,dxmq,dxtmq) 519 520 do i=1,nxyzq 521 a11 = xr(i) 522 a12 = xs(i) 523 a13 = xt(i) 524 525 a21 = yr(i) 526 a22 = ys(i) 527 a23 = yt(i) 528 529 a31 = zr(i) 530 a32 = zs(i) 531 a33 = zt(i) 532 533 g11 = (a22*a33-a23*a32) 534 g12 = (a13*a32-a33*a12) 535 g13 = (a12*a23-a22*a13) 536 537 g21 = (a23*a31-a21*a33) 538 g22 = (a11*a33-a31*a13) 539 g23 = (a13*a21-a23*a11) 540 541 g31 = (a21*a32-a22*a31) 542 g32 = (a12*a31-a32*a11) 543 g33 = (a11*a22-a21*a12) 544 545 jacmq = a11*g11+a21*g12+a31*g13 546 547 bmq(i,e) = w3mq(i,1,1)*jacmq 548 scale = w3mq(i,1,1)/jacmq 549 550 gf(1,i,e) = scale*(g11*g11+g12*g12+g13*g13) ! Grr 551 gf(2,i,e) = scale*(g11*g21+g12*g22+g13*g23) ! Grs 552 gf(3,i,e) = scale*(g11*g31+g12*g32+g13*g33) ! Grt 553 gf(4,i,e) = scale*(g21*g21+g22*g22+g23*g23) ! Gss 554 gf(5,i,e) = scale*(g21*g31+g22*g32+g23*g33) ! Gst 555 gf(6,i,e) = scale*(g31*g31+g32*g32+g33*g33) ! Gtt 556 557 enddo 558 enddo 559 560 return 561 end 562C----------------------------------------------------------------------- 563 subroutine setprecn_bp1 (d,h1,h2) 564C Generate diagonal preconditioner for Helmholtz operator 565C Input: h1,h2 Output: d 566 include 'SIZE' 567 include 'TOTAL' 568 569 parameter (lxyz=lx1*ly1*lz1,lg=3+3*(ldim-2)) 570 571 real*8 d(lx1,ly1,lz1,lelt),h1(lxyz,lelt),h2(lxyz,lelt) 572 integer e 573 574 real*8 gf(lg,lx1,ly1,lz1,lelt) ! Equivalence new gf() data 575 equivalence (gf,g1m1) ! layout to g1m1...g6m1 576 577 real*8 ysm1(ly1) 578 579 nel = nelfld(ifield) 580 n = nel*lx1*ly1*lz1 581 nxyz = lx1*ly1*lz1 582 583 call copy (d,bm1,n) ! Mass matrix preconditioning full mass matrix 584 call dssum (d,nx1,ny1,nz1) 585 call invcol1 (d,n) 586 return 587 588 call dsset(lx1,ly1,lz1) 589 590 do 1000 e=1,nel 591 592 call rzero(d(1,1,1,e),nxyz) 593 594 do 320 iz=1,lz1 595 do 320 iy=1,ly1 596 do 320 ix=1,lx1 597 do 320 iq=1,lx1 598 d(ix,iy,iz,e) = d(ix,iy,iz,e) 599 $ + gf(1,iq,iy,iz,e) * dxm1(iq,ix)**2 600 $ + gf(2,ix,iq,iz,e) * dxm1(iq,iy)**2 601 $ + gf(3,ix,iy,iq,e) * dxm1(iq,iz)**2 602 320 continue 603C 604C Add cross terms if element is deformed. 605C 606 if (lxyz.gt.0) then 607 608 do i2=1,ly1,ly1-1 609 do i1=1,lx1,lx1-1 610 d(1,i1,i2,e) = d(1,i1,i2,e) 611 $ + gf(4,1,i1,i2,e) * dxtm1(1,1)*dytm1(i1,i1) 612 $ + gf(5,1,i1,i2,e) * dxtm1(1,1)*dztm1(i2,i2) 613 d(lx1,i1,i2,e) = d(lx1,i1,i2,e) 614 $ + gf(4,lx1,i1,i2,e) * dxtm1(lx1,lx1)*dytm1(i1,i1) 615 $ + gf(5,lx1,i1,i2,e) * dxtm1(lx1,lx1)*dztm1(i2,i2) 616 d(i1,1,i2,e) = d(i1,1,i2,e) 617 $ + gf(4,i1,1,i2,e) * dytm1(1,1)*dxtm1(i1,i1) 618 $ + gf(6,i1,1,i2,e) * dytm1(1,1)*dztm1(i2,i2) 619 d(i1,ly1,i2,e) = d(i1,ly1,i2,e) 620 $ + gf(4,i1,ly1,i2,e) * dytm1(ly1,ly1)*dxtm1(i1,i1) 621 $ + gf(6,i1,ly1,i2,e) * dytm1(ly1,ly1)*dztm1(i2,i2) 622 d(i1,i2,1,e) = d(i1,i2,1,e) 623 $ + gf(5,i1,i2,1,e) * dztm1(1,1)*dxtm1(i1,i1) 624 $ + gf(6,i1,i2,1,e) * dztm1(1,1)*dytm1(i2,i2) 625 d(i1,i2,lz1,e) = d(i1,i2,lz1,e) 626 $ + gf(5,i1,i2,lz1,e) * dztm1(lz1,lz1)*dxtm1(i1,i1) 627 $ + gf(6,i1,i2,lz1,e) * dztm1(lz1,lz1)*dytm1(i2,i2) 628 629 enddo 630 enddo 631 endif 632 633 do i=1,lxyz 634 d(i,1,1,e)=d(i,1,1,e)*h1(i,e)+h2(i,e)*bm1(i,1,1,e) 635 enddo 636 637 1000 continue ! element loop 638 639C If axisymmetric, add a diagonal term in the radial direction (ISD=2) 640 641 if (ifaxis.and.(isd.eq.2)) then 642 do 1200 e=1,nel 643 if (ifrzer(e)) call mxm(ym1(1,1,1,e),lx1,datm1,ly1,ysm1,1) 644 k=0 645 do 1190 j=1,ly1 646 do 1190 i=1,lx1 647 k=k+1 648 if (ym1(i,j,1,e).ne.0.) then 649 term1 = bm1(i,j,1,e)/ym1(i,j,1,e)**2 650 if (ifrzer(e)) then 651 term2 = wxm1(i)*wam1(1)*dam1(1,j) 652 $ *jacm1(i,1,1,e)/ysm1(i) 653 else 654 term2 = 0. 655 endif 656 d(i,j,1,e) = d(i,j,1,e) + h1(k,e)*(term1+term2) 657 endif 658 1190 continue 659 1200 continue 660 661 endif 662 call dssum (d,nx1,ny1,nz1) 663 call invcol1 (d,n) 664 665 if (nio.eq.0) write(6,1) n,d(1,1,1,1),h1(1,1),h2(1,1),bm1(1,1,1,1) 666 1 format(i9,1p4e12.4,' diag prec') 667 668 return 669 end 670C----------------------------------------------------------------------- 671 subroutine setprecn_bp3 (d,h1,h2) 672C Generate dummy diagonal preconditioner for Helmholtz operator 673C Input: h1,h2 Output: d 674 include 'SIZE' 675 include 'TOTAL' 676 677 parameter (n=lx1*ly1*lz1*lelt) 678 real*8 d(n),h1(n),h2(n) 679 680 call rone (d,n) 681 682 return 683 end 684C----------------------------------------------------------------------- 685 subroutine userchk 686 include 'SIZE' 687 include 'TOTAL' 688 689 integer bp 690 691 call get_bp(bp) 692 693 if (bp==1) then 694 if (istep.gt.0) call bp1 695 elseif (bp==3) then 696 if (istep.gt.0) call bp3 697 else 698 write(6,*) "INVALID BP SPECIFICED" 699 endif 700 701 return 702 end 703C----------------------------------------------------------------------- 704 subroutine bp1 705C Solution to BP1 using libCEED 706 include 'SIZE' 707 include 'TOTAL' 708 include 'CTIMER' ! ifsync 709 include 'FDMH1' 710 include 'ceedf.h' 711 712 parameter (lzq=lx1+1) 713 parameter (lx=lx1*ly1*lz1,lg=3+3*(ldim-2),lq=lzq**ldim) 714 common /bpgfactors/ gf(lg*lq,lelt),bmq(lq,lelt),w3mq(lq) 715 716 parameter (lt=lx1*ly1*lz1*lelt) 717 parameter (ld=lxd*lyd*lzd*lelt) 718 common /vcrns/ u1(lt),r1(lt),r2(lt),r3(lt) 719 common /vcrny/ e1(lt) 720 common /vcrvh/ h1(lt),h2(lx*lelt),pap(3) 721 real*8 coords(ldim*lx*lelt) 722 723 logical ifh3 724 integer*8 nnode 725 integer ceed,err,test 726 character*64 spec 727 728 integer p,q,ncompx,ncompu,enode,lnode 729 integer vec_p1,vec_ap1,vec_qdata,vec_coords,vec_rhs 730 integer stridesu(3),stridesx(3),stridesw(3) 731 integer erstrctu,erstrctx,erstrctw 732 integer basisu,basisx 733 integer qf_mass,qf_setup 734 integer op_mass,op_setup 735 real*8 x,y,z 736 integer*8 offset 737 738 external massf,masssetupf 739 740 ifield = 1 741 nxq = nx1+1 742 n = nx1*ny1*nz1*nelt 743 744 ifsync = .false. 745 746C Set up coordinates 747 ii=0 748 do j=0,nelt-1 749 do i=1,lx 750 ii=ii+1 751 x = xm1(ii,1,1,1) 752 y = ym1(ii,1,1,1) 753 z = zm1(ii,1,1,1) 754 coords(i+0*lx+3*j*lx)=x 755 coords(i+1*lx+3*j*lx)=y 756 coords(i+2*lx+3*j*lx)=z 757 enddo 758 enddo 759 760C Init ceed library 761 call get_spec(spec) 762 call ceedinit(trim(spec)//char(0),ceed,err) 763 764 call get_test(test) 765 766C Set up Nek geometry data 767 call geodatq (gf,bmq,w3mq,nxq) ! Set up gf() arrays 768 call set_h2_as_rhoJac_GL(h2,bmq,nxq) 769 770C Set up true soln 771 call dist_fld_h1 (e1) 772 call copy (h1,e1,n) ! Save exact soln in h1 773 774C Set up solver parameters 775 tol = 1e-10 776 param(22) = tol 777 maxit = 100 778 779 call nekgsync() 780 781C Create ceed basis for mesh and computation 782 p=nx1 783 q=p+1 784 ncompu=1 785 ncompx=ldim 786 call ceedbasiscreatetensorh1lagrange(ceed,ndim,ndim,p,q, 787 $ ceed_gauss,basisx,err) 788 call ceedbasiscreatetensorh1lagrange(ceed,ndim,ncompu,p,q, 789 $ ceed_gauss,basisu,err) 790 791C Create ceed element restrictions for mesh and computation 792 enode=p**ldim 793 lnode=enode*nelt*ncompu 794 stridesx=[1,enode,enode*ldim] 795 call ceedelemrestrictioncreatestrided(ceed,nelt,enode,lnode, 796 $ ldim,stridesx,erstrctx,err) 797 stridesu=[1,enode,enode*ncompu] 798 call ceedelemrestrictioncreatestrided(ceed,nelt,enode,lnode, 799 $ ncompu,stridesu,erstrctu,err) 800 stridesw=[1,q**ldim,q**ldim] 801 call ceedelemrestrictioncreatestrided(ceed,nelt,q**ldim, 802 $ nelt*q**ldim,1,stridesw,erstrctw,err) 803 804C Create ceed vectors 805 call ceedvectorcreate(ceed,lnode,vec_p1,err) 806 call ceedvectorcreate(ceed,lnode,vec_ap1,err) 807 call ceedvectorcreate(ceed,lnode,vec_rhs,err) 808 call ceedvectorcreate(ceed,ldim*lx*nelt,vec_coords,err) 809 call ceedvectorcreate(ceed,nelt*q**ldim,vec_qdata,err) 810 811 offset=0 812 call ceedvectorsetarray(vec_coords,ceed_mem_host, 813 $ ceed_use_pointer,coords,offset,err) 814 815C Create ceed qfunctions for masssetupf and massf 816 call ceedqfunctioncreateinterior(ceed,1,masssetupf, 817 $ EXAMPLE_DIR 818 $ //'bps/bps.h:masssetupf',qf_setup,err) 819 call ceedqfunctionaddinput(qf_setup,'x',ncompx, 820 $ ceed_eval_interp,err) 821 call ceedqfunctionaddinput(qf_setup,'dx',ncompx*ldim, 822 $ ceed_eval_grad,err) 823 call ceedqfunctionaddinput(qf_setup,'weight',ncompu, 824 $ ceed_eval_weight,err) 825 call ceedqfunctionaddoutput(qf_setup,'qdata',ncompu, 826 $ ceed_eval_none,err) 827 call ceedqfunctionaddoutput(qf_setup,'rhs',ncompu, 828 $ ceed_eval_interp,err) 829 830 call ceedqfunctioncreateinterior(ceed,1,massf, 831 $ EXAMPLE_DIR 832 $ //'bps/bps.h:massf',qf_mass,err) 833 call ceedqfunctionaddinput(qf_mass,'u',ncompu, 834 $ ceed_eval_interp,err) 835 call ceedqfunctionaddinput(qf_mass,'qdata',ncompu, 836 $ ceed_eval_none,err) 837 call ceedqfunctionaddoutput(qf_mass,'v',ncompu, 838 $ ceed_eval_interp,err) 839 840C Create ceed operators 841 call ceedoperatorcreate(ceed,qf_setup, 842 $ ceed_qfunction_none,ceed_qfunction_none,op_setup,err) 843 call ceedoperatorsetfield(op_setup,'x',erstrctx, 844 $ basisx,ceed_vector_active,err) 845 call ceedoperatorsetfield(op_setup,'dx',erstrctx, 846 $ basisx,ceed_vector_active,err) 847 call ceedoperatorsetfield(op_setup,'weight',erstrctx, 848 $ basisx,ceed_vector_none,err) 849 call ceedoperatorsetfield(op_setup,'qdata',erstrctw, 850 $ ceed_basis_collocated,ceed_vector_active,err) 851 call ceedoperatorsetfield(op_setup,'rhs',erstrctu, 852 $ basisu,vec_rhs,err) 853 854 call ceedoperatorcreate(ceed,qf_mass, 855 $ ceed_qfunction_none,ceed_qfunction_none,op_mass,err) 856 call ceedoperatorsetfield(op_mass,'u',erstrctu, 857 $ basisu,ceed_vector_active,err) 858 call ceedoperatorsetfield(op_mass,'qdata',erstrctw, 859 $ ceed_basis_collocated,vec_qdata,err) 860 call ceedoperatorsetfield(op_mass,'v',erstrctu, 861 $ basisu,ceed_vector_active,err) 862 863C Compute setup data 864 call ceedvectorsetarray(vec_rhs,ceed_mem_host, 865 $ ceed_use_pointer,r1,offset,err) 866 call ceedoperatorapply(op_setup,vec_coords,vec_qdata, 867 $ ceed_request_immediate,err) 868 869C Set up true RHS 870 call dssum (r1,nx1,ny1,nz1) ! r1 871 872C Set up algebraic RHS with libCEED 873 call ceedvectorsetarray(vec_p1,ceed_mem_host, 874 $ ceed_use_pointer,h1,offset,err) 875 call ceedvectorsetarray(vec_ap1,ceed_mem_host, 876 $ ceed_use_pointer,r2,offset,err) 877 call ceedoperatorapply(op_mass,vec_p1,vec_ap1, 878 $ ceed_request_immediate,err) ! r2 = A_ceed*h1 879 call dssum (r2,nx1,ny1,nz1) 880 881C Set up algebraic RHS with Nek5000 882 call axhm1 (pap,r3,h1,h1,h2,'bp1') ! r3 = A_nek5k*h1 883 call dssum (r3,nx1,ny1,nz1) 884 885 call nekgsync() 886 887C Solve true RHS 888 if (nid.eq.0) write (6,*) "libCEED true RHS" 889 tstart = dnekclock() 890 call cggos(u1,r1,h1,h2,vmult,binvm1,tol,ceed,op_mass, 891 $ vec_p1,vec_ap1,maxit,'bp1') 892 tstop = dnekclock() 893 894C Output 895 telaps = (tstop-tstart) 896 maxits = maxit 897 er1 = glrdif(u1,e1,n) 898 if (nid.eq.0) write(6,3) lx1,nelgv,er1,' error ',maxit 899 900 if (test.eq.1.and.nid.eq.0) then 901 if (maxit>=100) then 902 write(6,*) "UNCONVERGED CG" 903 endif 904 if (dabs(er1)>5e-3) then 905 write(6,*) "ERROR IS TOO LARGE" 906 endif 907 endif 908 909 nx = nx1-1 910 nnode = nelgt ! nnodes 911 nnode = nnode*(nx**ldim) ! nnodes 912 nppp = nnode/np ! nnodes/proc 913 914 dofps = nnode/telaps ! DOF/sec - scalar form 915 titers = telaps/maxits ! time per iteration 916 tppp_s = titers/nppp ! time per iteraton per local point 917 918 if (nid.eq.0) write(6,1) 'case scalar:' 919 $ ,np,nx,nelt,nelgt,nnode,nppp,maxits,telaps,dofps,titers,tppp_s 920 921C Solve libCEED algebraic RHS 922 if (nid.eq.0) write (6,*) "libCEED algebraic RHS" 923 maxit = 100 924 tstart = dnekclock() 925 call cggos(u1,r2,h1,h2,vmult,binvm1,tol,ceed,op_mass, 926 $ vec_p1,vec_ap1,maxit,'bp1') 927 tstop = dnekclock() 928 929C Output 930 telaps = (tstop-tstart) 931 maxits = maxit 932 er1 = glrdif(u1,e1,n) 933 if (nid.eq.0) write(6,3) lx1,nelgv,er1,' error ',maxit 934 935 if (test.eq.1.and.nid.eq.0) then 936 if (maxit>=100) then 937 write(6,*) "UNCONVERGED CG" 938 endif 939 if (dabs(er1)>1e-5) then 940 write(6,*) "ERROR IS TOO LARGE" 941 endif 942 endif 943 944 nx = nx1-1 945 nnode = nelgt ! nnodes 946 nnode = nnode*(nx**ldim) ! nnodes 947 nppp = nnode/np ! nnodes/proc 948 949 dofps = nnode/telaps ! DOF/sec - scalar form 950 titers = telaps/maxits ! time per iteration 951 tppp_s = titers/nppp ! time per iteraton per local point 952 953 if (nid.eq.0) write(6,1) 'case scalar:' 954 $ ,np,nx,nelt,nelgt,nnode,nppp,maxits,telaps,dofps,titers,tppp_s 955 956C Solve Nek5000 algebraic RHS 957 if (nid.eq.0) write (6,*) "Nek5000 algebraic RHS" 958 maxit = 100 959 tstart = dnekclock() 960 call cggos(u1,r3,h1,h2,vmult,binvm1,tol,ceed,op_mass, 961 $ vec_p1,vec_ap1,maxit,'bp1') 962 tstop = dnekclock() 963 964C Output 965 telaps = (tstop-tstart) 966 maxits = maxit 967 er1 = glrdif(u1,e1,n) 968 if (nid.eq.0) write(6,3) lx1,nelgv,er1,' error ',maxit 969 970 if (test.eq.1.and.nid.eq.0) then 971 if (maxit>=100) then 972 write(6,*) "UNCONVERGED CG" 973 endif 974 if (dabs(er1)>1e-5) then 975 write(6,*) "ERROR IS TOO LARGE" 976 endif 977 endif 978 979 nx = nx1-1 980 nnode = nelgt ! nnodes 981 nnode = nnode*(nx**ldim) ! nnodes 982 nppp = nnode/np ! nnodes/proc 983 984 dofps = nnode/telaps ! DOF/sec - scalar form 985 titers = telaps/maxits ! time per iteration 986 tppp_s = titers/nppp ! time per iteraton per local point 987 988 if (nid.eq.0) write(6,1) 'case scalar:' 989 $ ,np,nx,nelt,nelgt,nnode,nppp,maxits,telaps,dofps,titers,tppp_s 990 991 1 format(a12,i7,i3,i7,i10,i14,i10,i4,1p4e13.5) 992 3 format(i3,i9,e12.4,1x,a8,i9) 993 994C Destroy ceed handles 995 call ceedvectordestroy(vec_p1,err) 996 call ceedvectordestroy(vec_ap1,err) 997 call ceedvectordestroy(vec_rhs,err) 998 call ceedvectordestroy(vec_qdata,err) 999 call ceedvectordestroy(vec_coords,err) 1000 call ceedelemrestrictiondestroy(erstrctu,err) 1001 call ceedelemrestrictiondestroy(erstrctx,err) 1002 call ceedelemrestrictiondestroy(erstrctw,err) 1003 call ceedbasisdestroy(basisu,err) 1004 call ceedbasisdestroy(basisx,err) 1005 call ceedqfunctiondestroy(qf_setup,err) 1006 call ceedqfunctiondestroy(qf_mass,err) 1007 call ceedoperatordestroy(op_setup,err) 1008 call ceedoperatordestroy(op_mass,err) 1009 call ceeddestroy(ceed,err) 1010 1011 return 1012 end 1013C----------------------------------------------------------------------- 1014 subroutine bp3 1015C Solution to BP3 using libCEED 1016 include 'SIZE' 1017 include 'TOTAL' 1018 include 'CTIMER' ! ifsync 1019 include 'FDMH1' 1020 include 'ceedf.h' 1021 1022 parameter (lzq=lx1+1) 1023 parameter (lx=lx1*ly1*lz1,lg=3+3*(ldim-2),lq=lzq**ldim) 1024 common /bpgfactors/ gf(lg*lq,lelt),bmq(lq,lelt),w3mq(lq) 1025 1026 parameter (lt=lx1*ly1*lz1*lelt) 1027 parameter (ld=lxd*lyd*lzd*lelt) 1028 common /vcrns/ u1(lt),r1(lt),r2(lt),r3(lt) 1029 common /vcrny/ e1(lt) 1030 common /vcrvh/ h1(lt),h2(ld),pap(3) 1031 real*8 coords(ldim*lx*lelt) 1032 1033 logical ifh3 1034 integer*8 nnode 1035 integer ceed,err,test 1036 character*64 spec 1037 1038 integer p,q,ncompx,ncompu,enode,lnode 1039 integer vec_p1,vec_ap1,vec_qdata,vec_coords,vec_rhs 1040 integer stridesu(3),stridesx(3),stridesw(3) 1041 integer erstrctu,erstrctx,erstrctw 1042 integer basisu,basisx 1043 integer qf_diffusion,qf_setup 1044 integer op_diffusion,op_setup 1045 integer ii,i,ngeo 1046 real*8 x,y,z 1047 integer*8 offset 1048 1049 external diffusionf,diffsetupf 1050 1051 ifield = 1 1052 nxq = nx1+1 1053 n = nx1*ny1*nz1*nelt 1054 1055 ifsync = .false. 1056 1057C Set up coordinates and mask 1058 ii=0 1059 do j=0,nelt-1 1060 do i=1,lx 1061 ii=ii+1 1062 x = xm1(ii,1,1,1) 1063 y = ym1(ii,1,1,1) 1064 z = zm1(ii,1,1,1) 1065 coords(i+0*lx+3*j*lx)=x 1066 coords(i+1*lx+3*j*lx)=y 1067 coords(i+2*lx+3*j*lx)=z 1068 if ( x.eq.0.or.x.eq.1 1069 $ .or.y.eq.0.or.y.eq.1 1070 $ .or.z.eq.0.or.z.eq.1 ) then 1071 h2(ii)=0. 1072 else 1073 h2(ii)=1. 1074 endif 1075 enddo 1076 enddo 1077 1078C Init ceed library 1079 call get_spec(spec) 1080 call ceedinit(trim(spec)//char(0),ceed,err) 1081 1082 call get_test(test) 1083 1084C Set up Nek geometry data 1085 call geodatq (gf,bmq,w3mq,nxq) ! Set up gf() arrays 1086 1087C Set up true soln 1088 call sin_fld_h1 (e1) 1089 call xmask1 (e1,h2,nelt) 1090 call copy (h1,e1,n) ! Save exact soln in h1 1091 1092C Set up solver parameters 1093 tol = 1e-10 1094 param(22) = tol 1095 maxit = 100 1096 1097 call nekgsync() 1098 1099C Create ceed basis for mesh and computation 1100 p=nx1 1101 q=p+1 1102 ncompu=1 1103 ncompx=ldim 1104 call ceedbasiscreatetensorh1lagrange(ceed,ldim,ncompx,p,q, 1105 $ ceed_gauss,basisx,err) 1106 call ceedbasiscreatetensorh1lagrange(ceed,ldim,ncompu,p,q, 1107 $ ceed_gauss,basisu,err) 1108 1109C Create ceed element restrictions for mesh and computation 1110 enode=p**ldim 1111 lnode=enode*nelt*ncompu 1112 ngeo=(ldim*(ldim+1))/2 1113 stridesx=[1,enode,enode*ldim] 1114 call ceedelemrestrictioncreatestrided(ceed,nelt,enode,lnode, 1115 $ ldim,stridesx,erstrctx,err) 1116 stridesu=[1,enode,enode*ncompu] 1117 call ceedelemrestrictioncreatestrided(ceed,nelt,enode,lnode, 1118 $ ncompu,stridesu,erstrctu,err) 1119 stridesw=[1,q**ldim,ngeo*q**ldim] 1120 call ceedelemrestrictioncreatestrided(ceed,nelt,q**ldim, 1121 $ nelt*q**ldim,ngeo,stridesw,erstrctw,err) 1122 1123C Create ceed vectors 1124 call ceedvectorcreate(ceed,lnode,vec_p1,err) 1125 call ceedvectorcreate(ceed,lnode,vec_ap1,err) 1126 call ceedvectorcreate(ceed,lnode,vec_rhs,err) 1127 call ceedvectorcreate(ceed,ldim*lx*nelt,vec_coords,err) 1128 call ceedvectorcreate(ceed,nelt*ngeo*q**ldim,vec_qdata,err) 1129 1130 offset=0 1131 call ceedvectorsetarray(vec_coords,ceed_mem_host, 1132 $ ceed_use_pointer,coords,offset,err) 1133 1134C Create ceed qfunctions for diffsetupf and diffusionf 1135 call ceedqfunctioncreateinterior(ceed,1,diffsetupf, 1136 $ EXAMPLE_DIR 1137 $ //'bps/bps.h:diffsetupf'//char(0),qf_setup,err) 1138 call ceedqfunctionaddinput(qf_setup,'x',ncompx, 1139 $ ceed_eval_interp,err) 1140 call ceedqfunctionaddinput(qf_setup,'dx',ncompx*ldim, 1141 $ ceed_eval_grad,err) 1142 call ceedqfunctionaddinput(qf_setup,'weight',ncompu, 1143 $ ceed_eval_weight,err) 1144 call ceedqfunctionaddoutput(qf_setup,'qdata',ngeo, 1145 $ ceed_eval_none,err) 1146 call ceedqfunctionaddoutput(qf_setup,'rhs',ncompu, 1147 $ ceed_eval_interp,err) 1148 1149 call ceedqfunctioncreateinterior(ceed,1,diffusionf, 1150 $ EXAMPLE_DIR 1151 $ //'bps/bps.h:diffusionf'//char(0),qf_diffusion,err) 1152 call ceedqfunctionaddinput(qf_diffusion,'u',ncompu*ldim, 1153 $ ceed_eval_grad,err) 1154 call ceedqfunctionaddinput(qf_diffusion,'qdata',ngeo, 1155 $ ceed_eval_none,err) 1156 call ceedqfunctionaddoutput(qf_diffusion,'v',ncompu*ldim, 1157 $ ceed_eval_grad,err) 1158 1159C Create ceed operators 1160 call ceedoperatorcreate(ceed,qf_setup, 1161 $ ceed_qfunction_none,ceed_qfunction_none,op_setup,err) 1162 call ceedoperatorsetfield(op_setup,'x',erstrctx, 1163 $ basisx,ceed_vector_active,err) 1164 call ceedoperatorsetfield(op_setup,'dx',erstrctx, 1165 $ basisx,ceed_vector_active,err) 1166 call ceedoperatorsetfield(op_setup,'weight',erstrctx, 1167 $ basisx,ceed_vector_none,err) 1168 call ceedoperatorsetfield(op_setup,'qdata',erstrctw, 1169 $ ceed_basis_collocated,ceed_vector_active,err) 1170 call ceedoperatorsetfield(op_setup,'rhs',erstrctu, 1171 $ basisu,vec_rhs,err) 1172 1173 call ceedoperatorcreate(ceed,qf_diffusion, 1174 $ ceed_qfunction_none,ceed_qfunction_none,op_diffusion,err) 1175 call ceedoperatorsetfield(op_diffusion,'u',erstrctu, 1176 $ basisu,ceed_vector_active,err) 1177 call ceedoperatorsetfield(op_diffusion,'qdata',erstrctw, 1178 $ ceed_basis_collocated,vec_qdata,err) 1179 call ceedoperatorsetfield(op_diffusion,'v',erstrctu, 1180 $ basisu,ceed_vector_active,err) 1181 1182C Compute setup data 1183 call ceedvectorsetarray(vec_rhs,ceed_mem_host, 1184 $ ceed_use_pointer,r1,offset,err) 1185 call ceedoperatorapply(op_setup,vec_coords,vec_qdata, 1186 $ ceed_request_immediate,err) 1187 1188C Set up true RHS 1189 call dssum (r1,nx1,ny1,nz1) ! r1 1190 call xmask1 (r1,h2,nelt) 1191 1192C Set up algebraic RHS with libCEED 1193 call ceedvectorsetarray(vec_p1,ceed_mem_host, 1194 $ ceed_use_pointer,h1,offset,err) 1195 call ceedvectorsetarray(vec_ap1,ceed_mem_host, 1196 $ ceed_use_pointer,r2,offset,err) 1197 call ceedoperatorapply(op_diffusion,vec_p1,vec_ap1, 1198 $ ceed_request_immediate,err) ! r2 = A_ceed*h1 1199 call dssum (r2,nx1,ny1,nz1) 1200 call xmask1 (r2,h2,nelt) 1201 1202C Set up algebraic RHS with Nek5000 1203 call axhm1 (pap,r3,h1,h1,h2,'bp3') ! r3 = A_nek5k*h1 1204 call dssum (r3,nx1,ny1,nz1) 1205 call xmask1 (r3,h2,nelt) 1206 1207 call nekgsync() 1208 1209C Solve true RHS 1210 if (nid.eq.0) write (6,*) "libCEED true RHS" 1211 tstart = dnekclock() 1212 call cggos(u1,r1,h1,h2,vmult,binvm1,tol,ceed,op_diffusion, 1213 $ vec_p1,vec_ap1,maxit,'bp3') 1214 tstop = dnekclock() 1215 1216C Output 1217 telaps = (tstop-tstart) 1218 maxits = maxit 1219 er1 = glrdif(u1,e1,n) 1220 if (nid.eq.0) write(6,3) lx1,nelgv,er1,' error ',maxit 1221 1222 if (test.eq.1.and.nid.eq.0) then 1223 if (maxit>=100) then 1224 write(6,*) "UNCONVERGED CG" 1225 endif 1226 if (dabs(er1)>1e-3) then 1227 write(6,*) "ERROR IS TOO LARGE" 1228 endif 1229 endif 1230 1231 nx = nx1-1 1232 nnode = nelgt ! nnodes 1233 nnode = nnode*(nx**ldim) ! nnodes 1234 nppp = nnode/np ! nnodes/proc 1235 1236 dofps = nnode/telaps ! DOF/sec - scalar form 1237 titers = telaps/maxits ! time per iteration 1238 tppp_s = titers/nppp ! time per iteraton per local point 1239 1240 if (nid.eq.0) write(6,1) 'case scalar:' 1241 $ ,np,nx,nelt,nelgt,nnode,nppp,maxits,telaps,dofps,titers,tppp_s 1242 1243C Solve libCEED algebraic RHS 1244 if (nid.eq.0) write (6,*) "libCEED algebraic RHS" 1245 maxit = 100 1246 tstart = dnekclock() 1247 call cggos(u1,r2,h1,h2,vmult,binvm1,tol,ceed,op_diffusion, 1248 $ vec_p1,vec_ap1,maxit,'bp3') 1249 tstop = dnekclock() 1250 1251C Output 1252 telaps = (tstop-tstart) 1253 maxits = maxit 1254 er1 = glrdif(u1,e1,n) 1255 if (nid.eq.0) write(6,3) lx1,nelgv,er1,' error ',maxit 1256 1257 if (test.eq.1.and.nid.eq.0) then 1258 if (maxit>=100) then 1259 write(6,*) "UNCONVERGED CG" 1260 endif 1261 if (dabs(er1)>1e-9) then 1262 write(6,*) "ERROR IS TOO LARGE" 1263 endif 1264 endif 1265 1266 nx = nx1-1 1267 nnode = nelgt ! nnodes 1268 nnode = nnode*(nx**ldim) ! nnodes 1269 nppp = nnode/np ! nnodes/proc 1270 1271 dofps = nnode/telaps ! DOF/sec - scalar form 1272 titers = telaps/maxits ! time per iteration 1273 tppp_s = titers/nppp ! time per iteraton per local point 1274 1275 if (nid.eq.0) write(6,1) 'case scalar:' 1276 $ ,np,nx,nelt,nelgt,nnode,nppp,maxits,telaps,dofps,titers,tppp_s 1277 1278C Solve Nek5000 algebraic RHS 1279 if (nid.eq.0) write (6,*) "Nek5000 algebraic RHS" 1280 maxit = 100 1281 tstart = dnekclock() 1282 call cggos(u1,r3,h1,h2,vmult,binvm1,tol,ceed,op_diffusion, 1283 $ vec_p1,vec_ap1,maxit,'bp3') 1284 tstop = dnekclock() 1285 1286C Output 1287 telaps = (tstop-tstart) 1288 maxits = maxit 1289 er1 = glrdif(u1,e1,n) 1290 if (nid.eq.0) write(6,3) lx1,nelgv,er1,' error ',maxit 1291 1292 if (test.eq.1.and.nid.eq.0) then 1293 if (maxit>=100) then 1294 write(6,*) "UNCONVERGED CG" 1295 endif 1296 if (dabs(er1)>1e-9) then 1297 write(6,*) "ERROR IS TOO LARGE" 1298 endif 1299 endif 1300 1301 nx = nx1-1 1302 nnode = nelgt ! nnodes 1303 nnode = nnode*(nx**ldim) ! nnodes 1304 nppp = nnode/np ! nnodes/proc 1305 1306 dofps = nnode/telaps ! DOF/sec - scalar form 1307 titers = telaps/maxits ! time per iteration 1308 tppp_s = titers/nppp ! time per iteraton per local point 1309 1310 if (nid.eq.0) write(6,1) 'case scalar:' 1311 $ ,np,nx,nelt,nelgt,nnode,nppp,maxits,telaps,dofps,titers,tppp_s 1312 1313 1 format(a12,i7,i3,i7,i10,i14,i10,i4,1p4e13.5) 1314 3 format(i3,i9,e12.4,1x,a8,i9) 1315 1316C Destroy ceed handles 1317 call ceedvectordestroy(vec_p1,err) 1318 call ceedvectordestroy(vec_ap1,err) 1319 call ceedvectordestroy(vec_rhs,err) 1320 call ceedvectordestroy(vec_qdata,err) 1321 call ceedvectordestroy(vec_coords,err) 1322 call ceedelemrestrictiondestroy(erstrctu,err) 1323 call ceedelemrestrictiondestroy(erstrctx,err) 1324 call ceedelemrestrictiondestroy(erstrctw,err) 1325 call ceedbasisdestroy(basisu,err) 1326 call ceedbasisdestroy(basisx,err) 1327 call ceedqfunctiondestroy(qf_setup,err) 1328 call ceedqfunctiondestroy(qf_diffusion,err) 1329 call ceedoperatordestroy(op_setup,err) 1330 call ceedoperatordestroy(op_diffusion,err) 1331 call ceeddestroy(ceed,err) 1332 1333 return 1334 end 1335C----------------------------------------------------------------------- 1336 subroutine cggos(u1,r1,h1,h2,rmult,binv,tin,ceed,ceed_op,vec_p1, 1337 $ vec_ap1,maxit,bpname) 1338C Scalar conjugate gradient iteration for solution of uncoupled 1339C Helmholtz equations 1340C Input: r1,h1,h2,rmult,binv,tin,ceed,ceed_op,vec_p1,vec_ap1,bpname 1341C Output: u1,maxit 1342 include 'SIZE' 1343 include 'TOTAL' 1344 include 'DOMAIN' 1345 include 'FDMH1' 1346 character*3 bpname 1347 1348C INPUT: rhs1 - rhs 1349C h1 - exact solution 1350 1351 parameter (lt=lx1*ly1*lz1*lelt) 1352 parameter (ld=lxd*lyd*lzd*lelt) 1353 real*8 u1(lt),r1(lt),h1(lt),h2(lt) 1354 real*8 rmult(1),binv(1) 1355 integer ceed,ceed_op,vec_ap1,vec_p1 1356 common /scrcg/ dpc(lt),p1(lt),z1(lt) 1357 common /scrca/ wv(4),wk(4),rpp1(4),rpp2(4),alph(4),beta(4),pap(4) 1358 1359 real*8 ap1(lt) 1360 equivalence (ap1,z1) 1361 1362 vol = volfld(ifield) 1363 nel = nelfld(ifield) 1364 nxyz = lx1*ly1*lz1 1365 n = nxyz*nel 1366 nx = nx1-1 ! Polynomial order (just for i/o) 1367 1368 tol=tin 1369 1370 if(bpname.ne.'bp1') then 1371 call setprecn_bp3(dpc,h1,h2) ! Set up diagional pre-conidtioner 1372 else 1373 call setprecn_bp1(dpc,h1,h2) ! Set up diagional pre-conidtioner 1374 endif 1375 1376 call rzero (u1,n) ! Initialize solution 1377 1378 wv(1)=0 1379 do i=1,n 1380 s=rmult(i) ! -1 1381 p1(i)=dpc(i)*r1(i) ! p = M r T 1382 wv(1)=wv(1)+s*p1(i)*r1(i) ! r p 1383 enddo 1384 call gop(wv(1),wk,'+ ',1) 1385 rpp1(1) = wv (1) 1386 1387 do 1000 iter=1,maxit 1388 call axhm1_ceed (pap,ap1,p1,h1,h2,ceed,ceed_op, 1389 $ vec_ap1,vec_p1) 1390 call dssum (ap1,nx1,ny1,nz1) 1391 if (bpname.ne.'bp1') call xmask1(ap1,h2,nel) 1392 1393 call gop (pap,wk,'+ ',1) 1394 alph(1) = rpp1(1)/pap(1) 1395 1396 do i=1,n 1397 u1(i)=u1(i)+alph(1)* p1(i) 1398 r1(i)=r1(i)-alph(1)*ap1(i) 1399 enddo 1400 1401C tolerance check here 1402 call rzero(wv,2) 1403 do i=1,n 1404 wv(1)=wv(1)+r1(i)*r1(i) ! L2 error estimate 1405 z1(i)=dpc(i)*r1(i) ! z = M r 1406 wv(2)=wv(2)+rmult(i)*z1(i)*r1(i) ! r z 1407 enddo 1408 call gop(wv,wk,'+ ',2) 1409 1410C if (nio.eq.0) write(6,1) ifield,istep,iter,nx,(wv(k),k=1,1) 1411 1 format(i2,i9,i5,i4,1p1e12.4,' cggos') 1412 1413 enorm=sqrt(wv(1)) 1414 if (enorm.lt.tol) then 1415 ifin = iter 1416 if (nio.eq.0) write(6,3000) istep,ifin,enorm,tol 1417 goto 9999 1418 endif 1419C if (nio.eq.0) write(6,2) iter,enorm,alph(1),pap(1),'alpha' 1420 2 format(i5,1p3e12.4,2x,a5) 1421 1422 rpp2(1)=rpp1(1) 1423 rpp1(1)=wv (2) 1424 beta1 =rpp1(1)/rpp2(1) 1425 do i=1,n 1426 p1(i)=z1(i) + beta1*p1(i) 1427 enddo 1428 1429 1000 continue 1430 1431 rbnorm=sqrt(wv(1)) 1432 if (nio.eq.0) write (6,3001) istep,iter,rbnorm,tol 1433 iter = iter-1 1434 1435 9999 continue 1436 1437 maxit=iter 1438 1439 3000 format(i12,1x,'cggo scalar:',i6,1p5e13.4) 1440 3001 format(2i6,' Unconverged cggo scalar: rbnorm =',1p2e13.6) 1441 1442 return 1443 end 1444C----------------------------------------------------------------------- 1445 subroutine axhm1_ceed(pap,ap1,p1,h1,h2,ceed,ceed_op, 1446 $ vec_ap1,vec_p1) 1447C Vector conjugate gradient matvec for solution of uncoupled 1448C Helmholtz equations 1449C Input: pap,p1,h1,h2,bpname,ceed,ceed_op,vec_ap1,vec_p1 1450C Output: ap1 1451 include 'SIZE' 1452 include 'TOTAL' 1453 include 'ceedf.h' 1454 1455 parameter (lx=lx1*ly1*lz1,lg=3+3*(ldim-2)) 1456 real*8 gf(lg,lx,lelt) ! Equivalence new gf() data 1457 equivalence (gf,g1m1) ! layout to g1m1...g6m1 1458 1459 real*8 pap(3) 1460 real*8 ap1(lx,lelt) 1461 real*8 p1(lx,lelt) 1462 real*8 h1(lx,lelt),h2(lx,lelt) 1463 integer ceed,ceed_op,vec_ap1,vec_p1,err 1464 integer i,e 1465 integer*8 offset 1466 1467 offset=0 1468 call ceedvectorsetarray(vec_p1,ceed_mem_host,ceed_use_pointer, 1469 $ p1,offset,err) 1470 call ceedvectorsetarray(vec_ap1,ceed_mem_host,ceed_use_pointer, 1471 $ ap1,offset,err) 1472 1473 call ceedoperatorapply(ceed_op,vec_p1,vec_ap1, 1474 $ ceed_request_immediate,err) 1475 1476 call ceedvectorsyncarray(vec_ap1,ceed_mem_host,err) 1477 1478 pap(1)=0. 1479 1480 do e=1,nelt 1481 do i=1,lx 1482 pap(1)=pap(1)+ap1(i,e)*p1(i,e) 1483 enddo 1484 enddo 1485 1486 return 1487 end 1488C----------------------------------------------------------------------- 1489 subroutine ax_e_bp1(w,u,g,h1,h2,b,ju,us,ut) 1490C Local matrix-vector for solution of BP3 (stiffness matrix) 1491C Input: u,g,h1,h2,b,ju,us,ut Output: w 1492 include 'SIZE' 1493 include 'TOTAL' 1494 1495 parameter (lxyz=lx1*ly1*lz1,lg=3+3*(ldim-2)) 1496 real*8 w(lxyz),u(lxyz),g(lg,lxyz),h1(lxyz),h2(lxyz),b(lxyz) 1497 real*8 ju(lxyz),us(lxyz),ut(lxyz) 1498 1499 nxq = nx1+1 ! Number of quadrature points 1500 1501 lxyzq = nxq**ldim 1502 1503 call intp_rstd (ju,u,lx1,nxq,if3d,0) ! 0 --> Fwd interpolation 1504 do i=1,lxyzq 1505 ju(i)=ju(i)*h2(i) !! h2 must be on the fine grid, w/ quad wts 1506 enddo 1507 call intp_rstd (w,ju,lx1,nxq,if3d,1) ! 1 --> ju-->u 1508 1509 return 1510 end 1511C----------------------------------------------------------------------- 1512 subroutine axhm1_bp1(pap,ap1,p1,h1,h2) 1513C Vector conjugate gradient matvec for solution of BP1 (mass matrix) 1514C Input: pap,p1,h1,h2 Output: ap1 1515 include 'SIZE' 1516 include 'TOTAL' 1517 1518 parameter (lx=lx1*ly1*lz1,lg=3+3*(ldim-2)) 1519 real*8 gf(lg,lx,lelt) ! Equivalence new gf() data 1520 equivalence (gf,g1m1) ! layout to g1m1...g6m1 1521 1522 real*8 pap(3) 1523 real*8 ap1(lx,lelt) 1524 real*8 p1(lx,lelt) 1525 real*8 h1(lx,lelt),h2(lx,lelt) 1526 1527 real*8 ur(lx),us(lx),ut(lx) 1528 common /ctmp1/ ur,us,ut 1529 1530 integer e 1531 1532 pap(1)=0. 1533 1534 k=1 1535 nxq = nx1+1 1536 1537 do e=1,nelt 1538 1539 call ax_e_bp1(ap1(1,e),p1(1,e),gf(1,1,e),h1(1,e),h2(k,1) 1540 $ ,bm1(1,1,1,e),ur,us,ut) 1541 do i=1,lx 1542 pap(1)=pap(1)+ap1(i,e)*p1(i,e) 1543 enddo 1544 k=k+nxq*nxq*nxq 1545 1546 enddo 1547 1548 return 1549 end 1550C----------------------------------------------------------------------- 1551 subroutine ax_e_bp3(w,u,g,ur,us,ut,wk) 1552C Local matrix-vector for solution of BP3 (stiffness matrix) 1553C Input: u,g,ur,us,ut,wk Output: w 1554 include 'SIZE' 1555 include 'TOTAL' 1556 1557 parameter (lzq=lx1+1,lxyz=lx1*lx1*lx1,lxyzq=lzq*lzq*lzq) 1558 1559 common /ctmp0/ tmp(lxyzq) 1560 common /dxmfine/ dxmq(lzq,lzq),dxtmq(lzq,lzq) 1561 1562 real*8 ur(lxyzq),us(lxyzq),ut(lxyzq),wk(lxyzq) 1563 real*8 w(lxyz),u(lxyz),g(2*ldim,lxyzq) 1564 1565 n = lzq-1 1566 1567 call intp_rstd (wk,u,lx1,lzq,if3d,0) ! 0 --> Fwd interpolation 1568 call loc_grad3 (ur,us,ut,wk,n,dxmq,dxtmq) 1569 1570 do i=1,lxyzq 1571 wr = g(1,i)*ur(i) + g(2,i)*us(i) + g(3,i)*ut(i) 1572 ws = g(2,i)*ur(i) + g(4,i)*us(i) + g(5,i)*ut(i) 1573 wt = g(3,i)*ur(i) + g(5,i)*us(i) + g(6,i)*ut(i) 1574 ur(i) = wr 1575 us(i) = ws 1576 ut(i) = wt 1577 enddo 1578 1579 call loc_grad3t (wk,ur,us,ut,n,dxmq,dxtmq,tmp) 1580 call intp_rstd (w,wk,lx1,lzq,if3d,1) ! 1 --> ju-->u 1581 1582 return 1583 end 1584C----------------------------------------------------------------------- 1585 subroutine axhm1_bp3(pap,ap1,p1,h1,h2) 1586C Vector conjugate gradient matvec for solution of BP3 (stiffness matrix) 1587C Input: pap,p1,h1,h2 Output: ap1 1588 include 'SIZE' 1589 include 'TOTAL' 1590 1591 parameter (lzq=lx1+1) 1592 parameter (lx=lx1*ly1*lz1,lg=3+3*(ldim-2),lq=lzq**ldim) 1593 common /bpgfactors/ gf(lg,lq,lelt),bmq(lq,lelt),w3mq(lq) 1594 1595 real*8 pap(3) 1596 real*8 ap1(lx,lelt) 1597 real*8 p1(lx,lelt) 1598 real*8 h1(lx,lelt),h2(lx,lelt) 1599 1600 common /ctmp1/ ur,us,ut,wk 1601 real*8 ur(lq),us(lq),ut(lq),wk(lq) 1602 1603 integer e 1604 1605 pap(1)=0. 1606 1607 do e=1,nelt 1608 1609 call ax_e_bp3(ap1(1,e),p1(1,e),gf(1,1,e),ur,us,ut,wk) 1610 do i=1,lx 1611 pap(1)=pap(1)+p1(i,e)*ap1(i,e) 1612 enddo 1613 1614 enddo 1615 1616 return 1617 end 1618C----------------------------------------------------------------------- 1619 subroutine axhm1(pap,ap1,p1,h1,h2,bpname) 1620C Vector conjugate gradient matvec for solution of uncoupled 1621C Helmholtz equations 1622C Input: pap,p1,h1,h2,bpname Output: ap1 1623 include 'SIZE' 1624 include 'TOTAL' 1625 1626 parameter (lx=lx1*ly1*lz1) 1627 1628 real*8 pap(3),ap1(lx,lelt),p1(lx,lelt) 1629 real*8 h1(lx,lelt),h2(lx,lelt) 1630 1631 character*3 bpname 1632 1633 if (bpname.eq.'bp1') then 1634 call axhm1_bp1(pap,ap1,p1,h1,h2) 1635 1636 elseif (bpname.eq.'bp3') then 1637 call axhm1_bp3(pap,ap1,p1,h1,h2) 1638 1639 else 1640 write(6,*) bpname,' axhm1 bpname error' 1641 stop 1642 1643 endif 1644 1645 return 1646 end 1647C----------------------------------------------------------------------- 1648 subroutine get_bp(bp) 1649C Get BP to run 1650C Input: Output: bp 1651 integer i,bp 1652 character*64 bpval 1653 1654 bp=0 1655 if(iargc().ge.1) then 1656 call getarg(1,bpval) 1657 endif 1658 if(bpval.eq."bp1") then 1659 bp=1 1660 elseif(bpval.eq."bp3") then 1661 bp=3 1662 endif 1663 1664 return 1665 end 1666C----------------------------------------------------------------------- 1667 subroutine get_spec(spec) 1668C Get CEED backend specification 1669C Input: Output: spec 1670 integer i 1671 character*64 spec 1672 1673 spec = '/cpu/self' 1674 if(iargc().ge.2) then 1675 call getarg(2,spec) 1676 endif 1677 1678 return 1679 end 1680C----------------------------------------------------------------------- 1681 subroutine get_test(test) 1682C Get test mode flag 1683C Input: Output: test 1684 integer i,test 1685 character*64 testval 1686 1687 test=0 1688 if(iargc().ge.3) then 1689 call getarg(3,testval) 1690 endif 1691 if(testval.eq."test") then 1692 test=1 1693 endif 1694 1695 return 1696 end 1697C----------------------------------------------------------------------- 1698 1699