1 #if !defined(PETSCDMTYPES_H) 2 #define PETSCDMTYPES_H 3 4 /*S 5 DM - Abstract PETSc object that manages an abstract grid object and its interactions with the algebraic solvers 6 7 Level: intermediate 8 9 Notes: 10 The DMDACreate() based object and the DMCompositeCreate() based object are examples of DMs 11 12 .seealso: DMCompositeCreate(), DMDACreate(), DMSetType(), DMType 13 S*/ 14 typedef struct _p_DM* DM; 15 16 /*E 17 DMBoundaryType - Describes the choice for fill of ghost cells on physical domain boundaries. 18 19 Level: beginner 20 21 A boundary may be of type DM_BOUNDARY_NONE (no ghost nodes), DM_BOUNDARY_GHOSTED (ghost vertices/cells 22 exist but aren't filled; you can put values into them and then apply a stencil that uses those ghost locations), 23 DM_BOUNDARY_MIRROR (the ghost value is the same as the value 1 grid point in; that is, the 0th grid point in the real mesh acts like a mirror to define the ghost point value; 24 not yet implemented for 3d), DM_BOUNDARY_PERIODIC (ghost vertices/cells filled by the opposite 25 edge of the domain), or DM_BOUNDARY_TWIST (like periodic, only glued backwards like a Mobius strip). 26 27 Notes: 28 This is information for the boundary of the __PHYSICAL__ domain. It has nothing to do with boundaries between 29 processes. That width is always determined by the stencil width; see DMDASetStencilWidth(). 30 31 If the physical grid points have values 0 1 2 3 with DM_BOUNDARY_MIRROR then the local vector with ghost points has the values 1 0 1 2 3 2 . 32 33 Developer Notes: 34 Should DM_BOUNDARY_MIRROR have the same meaning with DMDA_Q0, that is a staggered grid? In that case should the ghost point have the same value 35 as the 0th grid point where the physical boundary serves as the mirror? 36 37 References: 38 https://scicomp.stackexchange.com/questions/5355/writing-the-poisson-equation-finite-difference-matrix-with-neumann-boundary-cond 39 40 .seealso: DMDASetBoundaryType(), DMDACreate1d(), DMDACreate2d(), DMDACreate3d(), DMDACreate() 41 E*/ 42 typedef enum {DM_BOUNDARY_NONE, DM_BOUNDARY_GHOSTED, DM_BOUNDARY_MIRROR, DM_BOUNDARY_PERIODIC, DM_BOUNDARY_TWIST} DMBoundaryType; 43 /*E 44 DMBoundaryConditionType - indicates what type of boundary condition is to be imposed 45 46 Note: This flag indicates the type of function which will define the condition: 47 $ DM_BC_ESSENTIAL - A Dirichlet condition using a function of the coordinates 48 $ DM_BC_ESSENTIAL_FIELD - A Dirichlet condition using a function of the coordinates and auxiliary field data 49 $ DM_BC_ESSENTIAL_BD_FIELD - A Dirichlet condition using a function of the coordinates, facet normal, and auxiliary field data 50 $ DM_BC_NATURAL - A Neumann condition using a function of the coordinates 51 $ DM_BC_NATURAL_FIELD - A Neumann condition using a function of the coordinates and auxiliary field data 52 $ DM_BC_NATURAL_RIEMANN - A flux condition which determines the state in ghost cells 53 The user can check whether a boundary condition is essential using (type & DM_BC_ESSENTIAL), and similarly for 54 natural conditions (type & DM_BC_NATURAL) 55 56 Level: beginner 57 58 .seealso: DMAddBoundary(), DMGetBoundary() 59 E*/ 60 typedef enum {DM_BC_ESSENTIAL = 1, DM_BC_ESSENTIAL_FIELD = 5, DM_BC_NATURAL = 2, DM_BC_NATURAL_FIELD = 6, DM_BC_ESSENTIAL_BD_FIELD = 9, DM_BC_NATURAL_RIEMANN = 10} DMBoundaryConditionType; 61 62 /*E 63 DMPointLocationType - Describes the method to handle point location failure 64 65 Level: beginner 66 67 If a search using DM_POINTLOCATION_NONE fails, the failure is signaled with a negative cell number. On the 68 other hand, if DM_POINTLOCATION_NEAREST is used, on failure, the (approximate) nearest point in the mesh is 69 used, replacing the given point in the input vector. DM_POINTLOCATION_REMOVE returns values only for points 70 which were located. 71 72 .seealso: DMLocatePoints() 73 E*/ 74 typedef enum {DM_POINTLOCATION_NONE, DM_POINTLOCATION_NEAREST, DM_POINTLOCATION_REMOVE} DMPointLocationType; 75 76 /*E 77 DMAdaptationStrategy - Describes the strategy used for adaptive solves 78 79 Level: beginner 80 81 DM_ADAPTATION_INITIAL will refine a mesh based on an initial guess. DM_ADAPTATION_SEQUENTIAL will refine the 82 mesh based on a sequence of solves, much like grid sequencing. DM_ADAPTATION_MULTILEVEL will use the sequence 83 of constructed meshes in a multilevel solve, much like the Systematic Upscaling of Brandt. 84 85 .seealso: DMAdaptorSolve() 86 E*/ 87 typedef enum {DM_ADAPTATION_INITIAL, DM_ADAPTATION_SEQUENTIAL, DM_ADAPTATION_MULTILEVEL} DMAdaptationStrategy; 88 89 /*E 90 DMAdaptationCriterion - Describes the test used to decide whether to coarsen or refine parts of the mesh 91 92 Level: beginner 93 94 DM_ADAPTATION_REFINE will uniformly refine a mesh, much like grid sequencing. DM_ADAPTATION_LABEL will adapt 95 the mesh based upon a label of the cells filled with DMAdaptFlag markers. DM_ADAPTATION_METRIC will try to 96 mesh the manifold described by the input metric tensor uniformly. PETSc can also construct such a metric based 97 upon an input primal or a gradient field. 98 99 .seealso: DMAdaptorSolve() 100 E*/ 101 typedef enum {DM_ADAPTATION_NONE, DM_ADAPTATION_REFINE, DM_ADAPTATION_LABEL, DM_ADAPTATION_METRIC} DMAdaptationCriterion; 102 103 /*E 104 DMAdaptFlag - Marker in the label prescribing adaptation 105 106 Level: beginner 107 108 .seealso: DMAdaptLabel() 109 E*/ 110 typedef enum {DM_ADAPT_DETERMINE = PETSC_DETERMINE, DM_ADAPT_KEEP = 0, DM_ADAPT_REFINE, DM_ADAPT_COARSEN, DM_ADAPT_COARSEN_LAST, DM_ADAPT_RESERVED_COUNT} DMAdaptFlag; 111 112 /*S 113 PetscPartitioner - PETSc object that manages a graph partitioner 114 115 Level: intermediate 116 117 .seealso: PetscPartitionerCreate(), PetscPartitionerSetType(), PetscPartitionerType 118 S*/ 119 typedef struct _p_PetscPartitioner *PetscPartitioner; 120 121 /*E 122 PetscUnit - The seven fundamental SI units 123 124 Level: beginner 125 126 .seealso: DMPlexGetScale(), DMPlexSetScale() 127 E*/ 128 typedef enum {PETSC_UNIT_LENGTH, PETSC_UNIT_MASS, PETSC_UNIT_TIME, PETSC_UNIT_CURRENT, PETSC_UNIT_TEMPERATURE, PETSC_UNIT_AMOUNT, PETSC_UNIT_LUMINOSITY, NUM_PETSC_UNITS} PetscUnit; 129 130 /*S 131 DMField - PETSc object for defining a field on a mesh topology 132 133 Level: intermediate 134 S*/ 135 typedef struct _p_DMField* DMField; 136 137 #endif 138