1 /* 2 Contains all error handling interfaces for PETSc. 3 */ 4 #if !defined(__PETSCERROR_H) 5 #define __PETSCERROR_H 6 7 /* 8 Defines the directory where the compiled source is located; used 9 in printing error messages. Each makefile has an entry 10 LOCDIR = thedirectory 11 and bmake/common_variables includes in CCPPFLAGS -D__SDIR__=${LOCDIR} 12 which is a flag passed to the C/C++ compilers. This declaration below 13 is only needed if some code is compiled without the -D__SDIR__ 14 */ 15 #if !defined(__INSDIR__) 16 #define __INSDIR__ "unknowndirectory/" 17 #endif 18 19 /* 20 Defines the function where the compiled source is located; used 21 in printing error messages. This is defined here in case the user 22 does not declare it. 23 */ 24 #if !defined(__FUNCT__) 25 #define __FUNCT__ "User provided function" 26 #endif 27 28 /* 29 These are the generic error codes. These error codes are used 30 many different places in the PETSc source code. The string versions are 31 at src/sys/error/err.c any changes here must also be made there 32 These are also define in include/finclude/petscerror.h any CHANGES here 33 must be also made there. 34 35 */ 36 #define PETSC_ERR_MIN_VALUE 54 /* should always be one less then the smallest value */ 37 38 #define PETSC_ERR_MEM 55 /* unable to allocate requested memory */ 39 #define PETSC_ERR_SUP 56 /* no support for requested operation */ 40 #define PETSC_ERR_SUP_SYS 57 /* no support for requested operation on this computer system */ 41 #define PETSC_ERR_ORDER 58 /* operation done in wrong order */ 42 #define PETSC_ERR_SIG 59 /* signal received */ 43 #define PETSC_ERR_FP 72 /* floating point exception */ 44 #define PETSC_ERR_COR 74 /* corrupted PETSc object */ 45 #define PETSC_ERR_LIB 76 /* error in library called by PETSc */ 46 #define PETSC_ERR_PLIB 77 /* PETSc library generated inconsistent data */ 47 #define PETSC_ERR_MEMC 78 /* memory corruption */ 48 #define PETSC_ERR_CONV_FAILED 82 /* iterative method (KSP or SNES) failed */ 49 #define PETSC_ERR_USER 83 /* user has not provided needed function */ 50 #define PETSC_ERR_SYS 88 /* error in system call */ 51 #define PETSC_ERR_POINTER 70 /* pointer does not point to valid address */ 52 53 #define PETSC_ERR_ARG_SIZ 60 /* nonconforming object sizes used in operation */ 54 #define PETSC_ERR_ARG_IDN 61 /* two arguments not allowed to be the same */ 55 #define PETSC_ERR_ARG_WRONG 62 /* wrong argument (but object probably ok) */ 56 #define PETSC_ERR_ARG_CORRUPT 64 /* null or corrupted PETSc object as argument */ 57 #define PETSC_ERR_ARG_OUTOFRANGE 63 /* input argument, out of range */ 58 #define PETSC_ERR_ARG_BADPTR 68 /* invalid pointer argument */ 59 #define PETSC_ERR_ARG_NOTSAMETYPE 69 /* two args must be same object type */ 60 #define PETSC_ERR_ARG_NOTSAMECOMM 80 /* two args must be same communicators */ 61 #define PETSC_ERR_ARG_WRONGSTATE 73 /* object in argument is in wrong state, e.g. unassembled mat */ 62 #define PETSC_ERR_ARG_TYPENOTSET 89 /* the type of the object has not yet been set */ 63 #define PETSC_ERR_ARG_INCOMP 75 /* two arguments are incompatible */ 64 #define PETSC_ERR_ARG_NULL 85 /* argument is null that should not be */ 65 #define PETSC_ERR_ARG_UNKNOWN_TYPE 86 /* type name doesn't match any registered type */ 66 67 #define PETSC_ERR_FILE_OPEN 65 /* unable to open file */ 68 #define PETSC_ERR_FILE_READ 66 /* unable to read from file */ 69 #define PETSC_ERR_FILE_WRITE 67 /* unable to write to file */ 70 #define PETSC_ERR_FILE_UNEXPECTED 79 /* unexpected data in file */ 71 72 #define PETSC_ERR_MAT_LU_ZRPVT 71 /* detected a zero pivot during LU factorization */ 73 #define PETSC_ERR_MAT_CH_ZRPVT 81 /* detected a zero pivot during Cholesky factorization */ 74 75 #define PETSC_ERR_INT_OVERFLOW 84 /* should always be one less then the smallest value */ 76 77 #define PETSC_ERR_FLOP_COUNT 90 78 #define PETSC_ERR_NOT_CONVERGED 91 /* solver did not converge */ 79 #define PETSC_ERR_MAX_VALUE 92 /* this is always the one more than the largest error code */ 80 81 #define PetscStringizeArg(a) #a 82 #define PetscStringize(a) PetscStringizeArg(a) 83 #define __SDIR__ PetscStringize(__INSDIR__) 84 85 #if defined(PETSC_USE_ERRORCHECKING) 86 87 /*MC 88 SETERRQ - Macro that is called when an error has been detected, 89 90 Synopsis: 91 #include "petscsys.h" 92 PetscErrorCode SETERRQ(MPI_Comm comm,PetscErrorCode errorcode,char *message) 93 94 Not Collective 95 96 Input Parameters: 97 + errorcode - nonzero error code, see the list of standard error codes in include/petscerror.h 98 - message - error message 99 100 Level: beginner 101 102 Notes: 103 Once the error handler is called the calling function is then returned from with the given error code. 104 105 See SETERRQ1(), SETERRQ2(), SETERRQ3() for versions that take arguments 106 107 In Fortran MPI_Abort() is always called 108 109 Experienced users can set the error handler with PetscPushErrorHandler(). 110 111 Concepts: error^setting condition 112 113 .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), CHKERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ2(), SETERRQ3() 114 M*/ 115 #define SETERRQ(comm,n,s) return PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,__SDIR__,n,PETSC_ERROR_INITIAL,s) 116 117 /*MC 118 SETERRQ1 - Macro that is called when an error has been detected, 119 120 Synopsis: 121 #include "petscsys.h" 122 PetscErrorCode SETERRQ1(MPI_Comm comm,PetscErrorCode errorcode,char *formatmessage,arg) 123 124 Not Collective 125 126 Input Parameters: 127 + errorcode - nonzero error code, see the list of standard error codes in include/petscerror.h 128 . message - error message in the printf format 129 - arg - argument (for example an integer, string or double) 130 131 Level: beginner 132 133 Notes: 134 Once the error handler is called the calling function is then returned from with the given error code. 135 136 Experienced users can set the error handler with PetscPushErrorHandler(). 137 138 Concepts: error^setting condition 139 140 .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), CHKERRQ(), CHKMEMQ, SETERRQ(), SETERRQ2(), SETERRQ3() 141 M*/ 142 #define SETERRQ1(comm,n,s,a1) return PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,__SDIR__,n,PETSC_ERROR_INITIAL,s,a1) 143 144 /*MC 145 SETERRQ2 - Macro that is called when an error has been detected, 146 147 Synopsis: 148 #include "petscsys.h" 149 PetscErrorCode SETERRQ2(PetscErrorCode errorcode,char *formatmessage,arg1,arg2) 150 151 Not Collective 152 153 Input Parameters: 154 + errorcode - nonzero error code, see the list of standard error codes in include/petscerror.h 155 . message - error message in the printf format 156 . arg1 - argument (for example an integer, string or double) 157 - arg2 - argument (for example an integer, string or double) 158 159 Level: beginner 160 161 Notes: 162 Once the error handler is called the calling function is then returned from with the given error code. 163 164 Experienced users can set the error handler with PetscPushErrorHandler(). 165 166 Concepts: error^setting condition 167 168 .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), CHKERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ3() 169 M*/ 170 #define SETERRQ2(comm,n,s,a1,a2) return PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,__SDIR__,n,PETSC_ERROR_INITIAL,s,a1,a2) 171 172 /*MC 173 SETERRQ3 - Macro that is called when an error has been detected, 174 175 Synopsis: 176 #include "petscsys.h" 177 PetscErrorCode SETERRQ3(PetscErrorCode errorcode,char *formatmessage,arg1,arg2,arg3) 178 179 Not Collective 180 181 Input Parameters: 182 + errorcode - nonzero error code, see the list of standard error codes in include/petscerror.h 183 . message - error message in the printf format 184 . arg1 - argument (for example an integer, string or double) 185 . arg2 - argument (for example an integer, string or double) 186 - arg3 - argument (for example an integer, string or double) 187 188 Level: beginner 189 190 Notes: 191 Once the error handler is called the calling function is then returned from with the given error code. 192 193 There are also versions for 4, 5, 6 and 7 arguments. 194 195 Experienced users can set the error handler with PetscPushErrorHandler(). 196 197 Concepts: error^setting condition 198 199 .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), CHKERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ2() 200 M*/ 201 #define SETERRQ3(comm,n,s,a1,a2,a3) return PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,__SDIR__,n,PETSC_ERROR_INITIAL,s,a1,a2,a3) 202 203 #define SETERRQ4(comm,n,s,a1,a2,a3,a4) return PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,__SDIR__,n,PETSC_ERROR_INITIAL,s,a1,a2,a3,a4) 204 #define SETERRQ5(comm,n,s,a1,a2,a3,a4,a5) return PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,__SDIR__,n,PETSC_ERROR_INITIAL,s,a1,a2,a3,a4,a5) 205 #define SETERRQ6(comm,n,s,a1,a2,a3,a4,a5,a6) return PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,__SDIR__,n,PETSC_ERROR_INITIAL,s,a1,a2,a3,a4,a5,a6) 206 #define SETERRQ7(comm,n,s,a1,a2,a3,a4,a5,a6,a7) return PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,__SDIR__,n,PETSC_ERROR_INITIAL,s,a1,a2,a3,a4,a5,a6,a7) 207 #define SETERRQ8(comm,n,s,a1,a2,a3,a4,a5,a6,a7,a8) return PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,__SDIR__,n,PETSC_ERROR_INITIAL,s,a1,a2,a3,a4,a5,a6,a7,a8) 208 #define SETERRABORT(comm,n,s) do {PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,__SDIR__,n,PETSC_ERROR_INITIAL,s);MPI_Abort(comm,n);} while (0) 209 210 /*MC 211 CHKERRQ - Checks error code, if non-zero it calls the error handler and then returns 212 213 Synopsis: 214 #include "petscsys.h" 215 PetscErrorCode CHKERRQ(PetscErrorCode errorcode) 216 217 Not Collective 218 219 Input Parameters: 220 . errorcode - nonzero error code, see the list of standard error codes in include/petscerror.h 221 222 Level: beginner 223 224 Notes: 225 Once the error handler is called the calling function is then returned from with the given error code. 226 227 Experienced users can set the error handler with PetscPushErrorHandler(). 228 229 CHKERRQ(n) is fundamentally a macro replacement for 230 if (n) return(PetscError(...,n,...)); 231 232 Although typical usage resembles "void CHKERRQ(PetscErrorCode)" as described above, for certain uses it is 233 highly inappropriate to use it in this manner as it invokes return(PetscErrorCode). In particular, 234 it cannot be used in functions which return(void) or any other datatype. In these types of functions, 235 you can use CHKERRV() which returns without an error code (bad idea since the error is ignored or 236 if (n) {PetscError(....); return(YourReturnType);} 237 where you may pass back a NULL to indicate an error. You can also call CHKERRABORT(comm,n) to have 238 MPI_Abort() returned immediately. 239 240 In Fortran MPI_Abort() is always called 241 242 Concepts: error^setting condition 243 244 .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), SETERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ2(), SETERRQ2() 245 M*/ 246 #define CHKERRQ(n) do {if (PetscUnlikely(n)) return PetscError(PETSC_COMM_SELF,__LINE__,PETSC_FUNCTION_NAME,__FILE__,__SDIR__,n,PETSC_ERROR_REPEAT," ");} while (0) 247 248 #define CHKERRV(n) do {if (PetscUnlikely(n)) {n = PetscError(PETSC_COMM_SELF,__LINE__,PETSC_FUNCTION_NAME,__FILE__,__SDIR__,n,PETSC_ERROR_REPEAT," ");return;}} while(0) 249 #define CHKERRABORT(comm,n) do {if (PetscUnlikely(n)) {PetscError(PETSC_COMM_SELF,__LINE__,PETSC_FUNCTION_NAME,__FILE__,__SDIR__,n,PETSC_ERROR_REPEAT," ");MPI_Abort(comm,n);}} while (0) 250 #define CHKERRCONTINUE(n) do {if (PetscUnlikely(n)) {PetscError(PETSC_COMM_SELF,__LINE__,PETSC_FUNCTION_NAME,__FILE__,__SDIR__,n,PETSC_ERROR_REPEAT," ");}} while (0) 251 252 #ifdef PETSC_CLANGUAGE_CXX 253 254 /*MC 255 CHKERRXX - Checks error code, if non-zero it calls the C++ error handler which throws an exception 256 257 Synopsis: 258 #include "petscsys.h" 259 void CHKERRXX(PetscErrorCode errorcode) 260 261 Not Collective 262 263 Input Parameters: 264 . errorcode - nonzero error code, see the list of standard error codes in include/petscerror.h 265 266 Level: beginner 267 268 Notes: 269 Once the error handler throws a ??? exception. 270 271 You can use CHKERRV() which returns without an error code (bad idea since the error is ignored) 272 or CHKERRABORT(comm,n) to have MPI_Abort() returned immediately. 273 274 Concepts: error^setting condition 275 276 .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), SETERRQ(), CHKERRQ(), CHKMEMQ 277 M*/ 278 #define CHKERRXX(n) do {if (PetscUnlikely(n)) {PetscError(PETSC_COMM_SELF,__LINE__,PETSC_FUNCTION_NAME,__FILE__,__SDIR__,n,PETSC_ERROR_IN_CXX,0);}} while(0) 279 280 #endif 281 282 /*MC 283 CHKMEMQ - Checks the memory for corruption, calls error handler if any is detected 284 285 Synopsis: 286 #include "petscsys.h" 287 CHKMEMQ; 288 289 Not Collective 290 291 Level: beginner 292 293 Notes: 294 Must run with the option -malloc_debug to enable this option 295 296 Once the error handler is called the calling function is then returned from with the given error code. 297 298 By defaults prints location where memory that is corrupted was allocated. 299 300 Use CHKMEMA for functions that return void 301 302 Concepts: memory corruption 303 304 .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), SETERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ2(), SETERRQ3(), 305 PetscMallocValidate() 306 M*/ 307 #define CHKMEMQ do {PetscErrorCode _7_ierr = PetscMallocValidate(__LINE__,PETSC_FUNCTION_NAME,__FILE__,__SDIR__);CHKERRQ(_7_ierr);} while(0) 308 309 #define CHKMEMA PetscMallocValidate(__LINE__,PETSC_FUNCTION_NAME,__FILE__,__SDIR__) 310 311 #else /* PETSC_USE_ERRORCHECKING */ 312 313 /* 314 These are defined to be empty for when error checking is turned off, with ./configure --with-errorchecking=0 315 */ 316 317 #define SETERRQ(c,n,s) 318 #define SETERRQ1(c,n,s,a1) 319 #define SETERRQ2(c,n,s,a1,a2) 320 #define SETERRQ3(c,n,s,a1,a2,a3) 321 #define SETERRQ4(c,n,s,a1,a2,a3,a4) 322 #define SETERRQ5(c,n,s,a1,a2,a3,a4,a5) 323 #define SETERRQ6(c,n,s,a1,a2,a3,a4,a5,a6) 324 #define SETERRQ7(c,n,s,a1,a2,a3,a4,a5,a6,a7) 325 #define SETERRQ8(c,n,s,a1,a2,a3,a4,a5,a6,a7,a8) 326 #define SETERRABORT(comm,n,s) 327 328 #define CHKERRQ(n) ; 329 #define CHKERRABORT(comm,n) ; 330 #define CHKERRCONTINUE(n) ; 331 #define CHKMEMQ ; 332 333 #ifdef PETSC_CLANGUAGE_CXX 334 #define CHKERRXX(n) ; 335 #endif 336 337 #endif /* PETSC_USE_ERRORCHECKING */ 338 339 /*E 340 PetscErrorType - passed to the PETSc error handling routines indicating if this is the first or a later call to the error handlers 341 342 Level: advanced 343 344 PETSC_ERROR_IN_CXX indicates the error was detected in C++ and an exception should be generated 345 346 Developer Notes: This is currently used to decide when to print the detailed information about the run in PetscTraceBackErrorHandling() 347 348 .seealso: PetscError(), SETERRXX() 349 E*/ 350 typedef enum {PETSC_ERROR_INITIAL=0,PETSC_ERROR_REPEAT=1,PETSC_ERROR_IN_CXX = 2} PetscErrorType; 351 352 PETSC_EXTERN PetscErrorCode PetscErrorPrintfInitialize(void); 353 PETSC_EXTERN PetscErrorCode PetscErrorMessage(int,const char*[],char **); 354 PETSC_EXTERN PetscErrorCode PetscTraceBackErrorHandler(MPI_Comm,int,const char*,const char*,const char*,PetscErrorCode,PetscErrorType,const char*,void*); 355 PETSC_EXTERN PetscErrorCode PetscIgnoreErrorHandler(MPI_Comm,int,const char*,const char*,const char*,PetscErrorCode,PetscErrorType,const char*,void*); 356 PETSC_EXTERN PetscErrorCode PetscEmacsClientErrorHandler(MPI_Comm,int,const char*,const char*,const char*,PetscErrorCode,PetscErrorType,const char*,void*); 357 PETSC_EXTERN PetscErrorCode PetscMPIAbortErrorHandler(MPI_Comm,int,const char*,const char*,const char*,PetscErrorCode,PetscErrorType,const char*,void*); 358 PETSC_EXTERN PetscErrorCode PetscAbortErrorHandler(MPI_Comm,int,const char*,const char*,const char*,PetscErrorCode,PetscErrorType,const char*,void*); 359 PETSC_EXTERN PetscErrorCode PetscAttachDebuggerErrorHandler(MPI_Comm,int,const char*,const char*,const char*,PetscErrorCode,PetscErrorType,const char*,void*); 360 PETSC_EXTERN PetscErrorCode PetscReturnErrorHandler(MPI_Comm,int,const char*,const char*,const char*,PetscErrorCode,PetscErrorType,const char*,void*); 361 PETSC_EXTERN PetscErrorCode PetscError(MPI_Comm,int,const char*,const char*,const char*,PetscErrorCode,PetscErrorType,const char*,...); 362 PETSC_EXTERN PetscErrorCode PetscPushErrorHandler(PetscErrorCode (*handler)(MPI_Comm,int,const char*,const char*,const char*,PetscErrorCode,PetscErrorType,const char*,void*),void*); 363 PETSC_EXTERN PetscErrorCode PetscPopErrorHandler(void); 364 PETSC_EXTERN PetscErrorCode PetscDefaultSignalHandler(int,void*); 365 PETSC_EXTERN PetscErrorCode PetscPushSignalHandler(PetscErrorCode (*)(int,void *),void*); 366 PETSC_EXTERN PetscErrorCode PetscPopSignalHandler(void); 367 368 /*MC 369 PetscErrorPrintf - Prints error messages. 370 371 Synopsis: 372 #include "petscsys.h" 373 PetscErrorCode (*PetscErrorPrintf)(const char format[],...); 374 375 Not Collective 376 377 Input Parameters: 378 . format - the usual printf() format string 379 380 Options Database Keys: 381 + -error_output_stdout - cause error messages to be printed to stdout instead of the 382 (default) stderr 383 - -error_output_none to turn off all printing of error messages (does not change the way the 384 error is handled.) 385 386 Notes: Use 387 $ PetscErrorPrintf = PetscErrorPrintfNone; to turn off all printing of error messages (does not change the way the 388 $ error is handled.) and 389 $ PetscErrorPrintf = PetscErrorPrintfDefault; to turn it back on 390 $ of you can use your own function 391 392 Use 393 PETSC_STDERR = FILE* obtained from a file open etc. to have stderr printed to the file. 394 PETSC_STDOUT = FILE* obtained from a file open etc. to have stdout printed to the file. 395 396 Use 397 PetscPushErrorHandler() to provide your own error handler that determines what kind of messages to print 398 399 Level: developer 400 401 Fortran Note: 402 This routine is not supported in Fortran. 403 404 Concepts: error messages^printing 405 Concepts: printing^error messages 406 407 .seealso: PetscFPrintf(), PetscSynchronizedPrintf(), PetscHelpPrintf(), PetscPrintf(), PetscErrorHandlerPush(), PetscVFPrintf(), PetscHelpPrintf() 408 M*/ 409 PETSC_EXTERN PetscErrorCode (*PetscErrorPrintf)(const char[],...); 410 411 typedef enum {PETSC_FP_TRAP_OFF=0,PETSC_FP_TRAP_ON=1} PetscFPTrap; 412 PETSC_EXTERN PetscErrorCode PetscSetFPTrap(PetscFPTrap); 413 PETSC_EXTERN PetscErrorCode PetscFPTrapPush(PetscFPTrap); 414 PETSC_EXTERN PetscErrorCode PetscFPTrapPop(void); 415 416 /* Linux functions CPU_SET and others don't work if sched.h is not included before 417 including pthread.h. Also, these functions are active only if either _GNU_SOURCE 418 or __USE_GNU is not set (see /usr/include/sched.h and /usr/include/features.h), hence 419 set these first. 420 */ 421 #if defined(PETSC_HAVE_PTHREADCLASSES) 422 #if defined(PETSC_HAVE_SCHED_H) 423 #ifndef _GNU_SOURCE 424 #define _GNU_SOURCE 425 #endif 426 #include <sched.h> 427 #endif 428 #include <pthread.h> 429 #endif 430 431 /* 432 This code is for managing thread local global variables. Each of Linux, Microsoft WINDOWS, OpenMP, and Apple OS X have 433 different ways to indicate this. On OS X each thread local global is accessed by using a pthread_key_t for that variable. 434 Thus we have functions for creating destroying and using the keys. Except for OS X these access functions merely directly 435 acess the thread local variable. 436 */ 437 438 #if defined(PETSC_HAVE_PTHREADCLASSES) && !defined(PETSC_PTHREAD_LOCAL) 439 typedef pthread_key_t PetscThreadKey; 440 /* Get the value associated with key */ 441 PETSC_STATIC_INLINE void* PetscThreadLocalGetValue(PetscThreadKey key) 442 { 443 return pthread_getspecific(key); 444 } 445 446 /* Set the value for key */ 447 PETSC_STATIC_INLINE void PetscThreadLocalSetValue(PetscThreadKey *key,void* value) 448 { 449 pthread_setspecific(*key,(void*)value); 450 } 451 452 /* Create pthread thread local key */ 453 PETSC_STATIC_INLINE void PetscThreadLocalRegister(PetscThreadKey *key) 454 { 455 pthread_key_create(key,NULL); 456 } 457 458 /* Delete pthread thread local key */ 459 PETSC_STATIC_INLINE void PetscThreadLocalDestroy(PetscThreadKey key) 460 { 461 pthread_key_delete(key); 462 } 463 #else 464 typedef void* PetscThreadKey; 465 PETSC_STATIC_INLINE void* PetscThreadLocalGetValue(PetscThreadKey key) 466 { 467 return key; 468 } 469 470 PETSC_STATIC_INLINE void PetscThreadLocalSetValue(PetscThreadKey *key,void* value) 471 { 472 *key = value; 473 } 474 475 PETSC_STATIC_INLINE void PetscThreadLocalRegister(PETSC_UNUSED PetscThreadKey *key) 476 { 477 } 478 479 PETSC_STATIC_INLINE void PetscThreadLocalDestroy(PETSC_UNUSED PetscThreadKey key) 480 { 481 } 482 #endif 483 484 /* 485 Allows the code to build a stack frame as it runs 486 */ 487 #if defined(PETSC_USE_DEBUG) 488 489 #define PETSCSTACKSIZE 64 490 491 typedef struct { 492 const char *function[PETSCSTACKSIZE]; 493 const char *file[PETSCSTACKSIZE]; 494 const char *directory[PETSCSTACKSIZE]; 495 int line[PETSCSTACKSIZE]; 496 PetscBool petscroutine[PETSCSTACKSIZE]; 497 int currentsize; 498 } PetscStack; 499 500 #if defined(PETSC_HAVE_PTHREADCLASSES) 501 #if defined(PETSC_PTHREAD_LOCAL) 502 PETSC_EXTERN PETSC_PTHREAD_LOCAL PetscStack *petscstack; 503 #else 504 PETSC_EXTERN PetscThreadKey petscstack; 505 #endif 506 #elif defined(PETSC_HAVE_OPENMP) 507 PETSC_EXTERN PetscStack *petscstack; 508 #pragma omp threadprivate(petscstack) 509 #else 510 PETSC_EXTERN PetscStack *petscstack; 511 #endif 512 513 PETSC_EXTERN PetscErrorCode PetscStackCopy(PetscStack*,PetscStack*); 514 PETSC_EXTERN PetscErrorCode PetscStackPrint(PetscStack*,FILE* fp); 515 516 PETSC_STATIC_INLINE PetscBool PetscStackActive(void) 517 { 518 return(PetscThreadLocalGetValue(petscstack) ? PETSC_TRUE : PETSC_FALSE); 519 } 520 521 /*MC 522 PetscFunctionBegin - First executable line of each PETSc function 523 used for error handling. 524 525 Synopsis: 526 #include "petscsys.h" 527 void PetscFunctionBegin; 528 529 Not Collective 530 531 Usage: 532 .vb 533 int something; 534 535 PetscFunctionBegin; 536 .ve 537 538 Notes: 539 Not available in Fortran 540 541 Level: developer 542 543 .seealso: PetscFunctionReturn() 544 545 .keywords: traceback, error handling 546 M*/ 547 #define PetscFunctionBegin \ 548 do { \ 549 PetscStack* petscstackp; \ 550 petscstackp = (PetscStack*)PetscThreadLocalGetValue(petscstack); \ 551 if (petscstackp && (petscstackp->currentsize < PETSCSTACKSIZE)) { \ 552 petscstackp->function[petscstackp->currentsize] = PETSC_FUNCTION_NAME; \ 553 petscstackp->file[petscstackp->currentsize] = __FILE__; \ 554 petscstackp->directory[petscstackp->currentsize] = __SDIR__; \ 555 petscstackp->line[petscstackp->currentsize] = __LINE__; \ 556 petscstackp->petscroutine[petscstackp->currentsize] = PETSC_TRUE; \ 557 petscstackp->currentsize++; \ 558 } \ 559 PetscCheck__FUNCT__(); \ 560 PetscRegister__FUNCT__(); \ 561 } while (0) 562 563 /*MC 564 PetscFunctionBeginUser - First executable line of user provided PETSc routine 565 566 Synopsis: 567 #include "petscsys.h" 568 void PetscFunctionBeginUser; 569 570 Not Collective 571 572 Usage: 573 .vb 574 int something; 575 576 PetscFunctionBegin; 577 .ve 578 579 Notes: 580 Not available in Fortran 581 582 Level: developer 583 584 .seealso: PetscFunctionReturn() 585 586 .keywords: traceback, error handling 587 M*/ 588 #define PetscFunctionBeginUser \ 589 do { \ 590 PetscStack* petscstackp; \ 591 petscstackp = (PetscStack*)PetscThreadLocalGetValue(petscstack); \ 592 if (petscstackp && (petscstackp->currentsize < PETSCSTACKSIZE)) { \ 593 petscstackp->function[petscstackp->currentsize] = PETSC_FUNCTION_NAME; \ 594 petscstackp->file[petscstackp->currentsize] = __FILE__; \ 595 petscstackp->directory[petscstackp->currentsize] = __SDIR__; \ 596 petscstackp->line[petscstackp->currentsize] = __LINE__; \ 597 petscstackp->petscroutine[petscstackp->currentsize] = PETSC_FALSE; \ 598 petscstackp->currentsize++; \ 599 } \ 600 PetscCheck__FUNCT__(); \ 601 PetscRegister__FUNCT__(); \ 602 } while (0) 603 604 605 #if defined(PETSC_SERIALIZE_FUNCTIONS) 606 #include <petsc-private/petscfptimpl.h> 607 /* 608 Registers the current function into the global function pointer to function name table 609 610 Have to fix this to handle errors but cannot return error since used in PETSC_VIEWER_DRAW_() etc 611 */ 612 #define PetscRegister__FUNCT__() do { \ 613 static PetscBool __chked = PETSC_FALSE; \ 614 if (!__chked) {\ 615 void *ptr; PetscDLSym(NULL,__FUNCT__,&ptr);\ 616 __chked = PETSC_TRUE;\ 617 }} while (0) 618 #else 619 #define PetscRegister__FUNCT__() 620 #endif 621 622 #define PetscCheck__FUNCT__() do { PetscBool _sc1,_sc2; \ 623 PetscStrcmpNoError(PETSC_FUNCTION_NAME,__FUNCT__,&_sc1);\ 624 PetscStrcmpNoError(__FUNCT__,"User provided function",&_sc2);\ 625 if (!_sc1 && !_sc2) { \ 626 printf("%s%s:%d: __FUNCT__=\"%s\" does not agree with %s=\"%s\"\n",__SDIR__,__FILE__,__LINE__,__FUNCT__,PetscStringize(PETSC_FUNCTION_NAME),PETSC_FUNCTION_NAME); \ 627 } \ 628 } while (0) 629 630 #define PetscStackPush(n) \ 631 do { \ 632 PetscStack * petscstackp; \ 633 petscstackp = (PetscStack*)PetscThreadLocalGetValue(petscstack); \ 634 if (petscstackp && (petscstackp->currentsize < PETSCSTACKSIZE)) { \ 635 petscstackp->function[petscstackp->currentsize] = n; \ 636 petscstackp->file[petscstackp->currentsize] = "unknown"; \ 637 petscstackp->directory[petscstackp->currentsize] = "unknown"; \ 638 petscstackp->line[petscstackp->currentsize] = 0; \ 639 petscstackp->currentsize++; \ 640 } CHKMEMQ;} while (0) 641 642 #define PetscStackPop \ 643 do {PetscStack* petscstackp;CHKMEMQ; \ 644 petscstackp = (PetscStack*)PetscThreadLocalGetValue(petscstack); \ 645 if (petscstackp && petscstackp->currentsize > 0) { \ 646 petscstackp->currentsize--; \ 647 petscstackp->function[petscstackp->currentsize] = 0; \ 648 petscstackp->file[petscstackp->currentsize] = 0; \ 649 petscstackp->directory[petscstackp->currentsize] = 0; \ 650 petscstackp->line[petscstackp->currentsize] = 0; \ 651 }} while (0) 652 653 /*MC 654 PetscFunctionReturn - Last executable line of each PETSc function 655 used for error handling. Replaces return() 656 657 Synopsis: 658 #include "petscsys.h" 659 void PetscFunctionReturn(0); 660 661 Not Collective 662 663 Usage: 664 .vb 665 .... 666 PetscFunctionReturn(0); 667 } 668 .ve 669 670 Notes: 671 Not available in Fortran 672 673 Level: developer 674 675 .seealso: PetscFunctionBegin() 676 677 .keywords: traceback, error handling 678 M*/ 679 #define PetscFunctionReturn(a) \ 680 do { \ 681 PetscStack* petscstackp; \ 682 petscstackp = (PetscStack*)PetscThreadLocalGetValue(petscstack); \ 683 if (petscstackp && petscstackp->currentsize > 0) { \ 684 petscstackp->currentsize--; \ 685 petscstackp->function[petscstackp->currentsize] = 0; \ 686 petscstackp->file[petscstackp->currentsize] = 0; \ 687 petscstackp->directory[petscstackp->currentsize] = 0; \ 688 petscstackp->line[petscstackp->currentsize] = 0; \ 689 } \ 690 return(a);} while (0) 691 692 #define PetscFunctionReturnVoid() \ 693 do { \ 694 PetscStack* petscstackp; \ 695 petscstackp = (PetscStack*)PetscThreadLocalGetValue(petscstack); \ 696 if (petscstackp && petscstackp->currentsize > 0) { \ 697 petscstackp->currentsize--; \ 698 petscstackp->function[petscstackp->currentsize] = 0; \ 699 petscstackp->file[petscstackp->currentsize] = 0; \ 700 petscstackp->directory[petscstackp->currentsize] = 0; \ 701 petscstackp->line[petscstackp->currentsize] = 0; \ 702 } \ 703 return;} while (0) 704 #else 705 706 #define PetscFunctionBegin 707 #define PetscFunctionBeginUser 708 #define PetscFunctionReturn(a) return(a) 709 #define PetscFunctionReturnVoid() return 710 #define PetscStackPop CHKMEMQ 711 #define PetscStackPush(f) CHKMEMQ 712 #define PetscStackActive PETSC_FALSE 713 714 #endif 715 716 /* 717 PetscStackCall - Calls an external library routine or user function after pushing the name of the routine on the stack. 718 719 Input Parameters: 720 + name - string that gives the name of the function being called 721 - routine - actual call to the routine, including ierr = and CHKERRQ(ierr); 722 723 Note: Often one should use PetscStackCallStandard() instead. This routine is intended for external library routines that DO NOT return error codes 724 725 Developer Note: this is so that when a user or external library routine results in a crash or corrupts memory, they get blamed instead of PETSc. 726 727 728 729 */ 730 #define PetscStackCall(name,routine) do { PetscStackPush(name);routine;PetscStackPop; } while(0) 731 732 /* 733 PetscStackCallStandard - Calls an external library routine after pushing the name of the routine on the stack. 734 735 Input Parameters: 736 + func- name of the routine 737 - args - arguments to the routine surrounded by () 738 739 Notes: This is intended for external package routines that return error codes. Use PetscStackCall() for those that do not. 740 741 Developer Note: this is so that when an external packge routine results in a crash or corrupts memory, they get blamed instead of PETSc. 742 743 */ 744 #define PetscStackCallStandard(func,args) do { \ 745 PetscStackPush(#func);ierr = func args;PetscStackPop; if (ierr) SETERRQ1(PETSC_COMM_SELF,PETSC_ERR_LIB,"Error in %s()",#func); \ 746 } while (0) 747 748 PETSC_EXTERN PetscErrorCode PetscStackCreate(void); 749 PETSC_EXTERN PetscErrorCode PetscStackView(FILE*); 750 PETSC_EXTERN PetscErrorCode PetscStackDestroy(void); 751 PETSC_EXTERN PetscErrorCode PetscStackPublish(void); 752 PETSC_EXTERN PetscErrorCode PetscStackDepublish(void); 753 754 #endif 755