1 /* 2 Contains all error handling interfaces for PETSc. 3 */ 4 #if !defined(PETSCERROR_H) 5 #define PETSCERROR_H 6 7 /* 8 These are the generic error codes. These error codes are used 9 many different places in the PETSc source code. The string versions are 10 at src/sys/error/err.c any changes here must also be made there 11 These are also define in src/sys/f90-mod/petscerror.h any CHANGES here 12 must be also made there. 13 14 */ 15 #define PETSC_ERR_MIN_VALUE 54 /* should always be one less then the smallest value */ 16 17 #define PETSC_ERR_MEM 55 /* unable to allocate requested memory */ 18 #define PETSC_ERR_SUP 56 /* no support for requested operation */ 19 #define PETSC_ERR_SUP_SYS 57 /* no support for requested operation on this computer system */ 20 #define PETSC_ERR_ORDER 58 /* operation done in wrong order */ 21 #define PETSC_ERR_SIG 59 /* signal received */ 22 #define PETSC_ERR_FP 72 /* floating point exception */ 23 #define PETSC_ERR_COR 74 /* corrupted PETSc object */ 24 #define PETSC_ERR_LIB 76 /* error in library called by PETSc */ 25 #define PETSC_ERR_PLIB 77 /* PETSc library generated inconsistent data */ 26 #define PETSC_ERR_MEMC 78 /* memory corruption */ 27 #define PETSC_ERR_CONV_FAILED 82 /* iterative method (KSP or SNES) failed */ 28 #define PETSC_ERR_USER 83 /* user has not provided needed function */ 29 #define PETSC_ERR_SYS 88 /* error in system call */ 30 #define PETSC_ERR_POINTER 70 /* pointer does not point to valid address */ 31 #define PETSC_ERR_MPI_LIB_INCOMP 87 /* MPI library at runtime is not compatible with MPI user compiled with */ 32 33 #define PETSC_ERR_ARG_SIZ 60 /* nonconforming object sizes used in operation */ 34 #define PETSC_ERR_ARG_IDN 61 /* two arguments not allowed to be the same */ 35 #define PETSC_ERR_ARG_WRONG 62 /* wrong argument (but object probably ok) */ 36 #define PETSC_ERR_ARG_CORRUPT 64 /* null or corrupted PETSc object as argument */ 37 #define PETSC_ERR_ARG_OUTOFRANGE 63 /* input argument, out of range */ 38 #define PETSC_ERR_ARG_BADPTR 68 /* invalid pointer argument */ 39 #define PETSC_ERR_ARG_NOTSAMETYPE 69 /* two args must be same object type */ 40 #define PETSC_ERR_ARG_NOTSAMECOMM 80 /* two args must be same communicators */ 41 #define PETSC_ERR_ARG_WRONGSTATE 73 /* object in argument is in wrong state, e.g. unassembled mat */ 42 #define PETSC_ERR_ARG_TYPENOTSET 89 /* the type of the object has not yet been set */ 43 #define PETSC_ERR_ARG_INCOMP 75 /* two arguments are incompatible */ 44 #define PETSC_ERR_ARG_NULL 85 /* argument is null that should not be */ 45 #define PETSC_ERR_ARG_UNKNOWN_TYPE 86 /* type name doesn't match any registered type */ 46 47 #define PETSC_ERR_FILE_OPEN 65 /* unable to open file */ 48 #define PETSC_ERR_FILE_READ 66 /* unable to read from file */ 49 #define PETSC_ERR_FILE_WRITE 67 /* unable to write to file */ 50 #define PETSC_ERR_FILE_UNEXPECTED 79 /* unexpected data in file */ 51 52 #define PETSC_ERR_MAT_LU_ZRPVT 71 /* detected a zero pivot during LU factorization */ 53 #define PETSC_ERR_MAT_CH_ZRPVT 81 /* detected a zero pivot during Cholesky factorization */ 54 55 #define PETSC_ERR_INT_OVERFLOW 84 56 57 #define PETSC_ERR_FLOP_COUNT 90 58 #define PETSC_ERR_NOT_CONVERGED 91 /* solver did not converge */ 59 #define PETSC_ERR_MISSING_FACTOR 92 /* MatGetFactor() failed */ 60 #define PETSC_ERR_OPT_OVERWRITE 93 /* attempted to over write options which should not be changed */ 61 #define PETSC_ERR_WRONG_MPI_SIZE 94 /* example/application run with number of MPI ranks it does not support */ 62 #define PETSC_ERR_USER_INPUT 95 /* missing or incorrect user input */ 63 #define PETSC_ERR_MAX_VALUE 96 /* this is always the one more than the largest error code */ 64 65 #define PetscStringizeArg(a) #a 66 #define PetscStringize(a) PetscStringizeArg(a) 67 68 69 /*MC 70 SETERRQ - Macro to be called when an error has been detected, 71 72 Synopsis: 73 #include <petscsys.h> 74 PetscErrorCode SETERRQ(MPI_Comm comm,PetscErrorCode ierr,char *message) 75 76 Collective 77 78 Input Parameters: 79 + comm - A communicator, use PETSC_COMM_SELF unless you know all ranks of another communicator will detect the error 80 . ierr - nonzero error code, see the list of standard error codes in include/petscerror.h 81 - message - error message 82 83 Level: beginner 84 85 Notes: 86 Once the error handler is called the calling function is then returned from with the given error code. 87 88 See SETERRQ1(), SETERRQ2(), SETERRQ3() for versions that take arguments 89 90 Experienced users can set the error handler with PetscPushErrorHandler(). 91 92 Fortran Notes: 93 SETERRQ() may be called from Fortran subroutines but SETERRA() must be called from the 94 Fortran main program. 95 96 .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), CHKERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ2(), SETERRQ3() 97 M*/ 98 #define SETERRQ(comm,ierr,s) return PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,ierr,PETSC_ERROR_INITIAL,s) 99 100 /*MC 101 SETERRMPI - Macro to be called when an error has been detected within an MPI callback function 102 103 Synopsis: 104 #include <petscsys.h> 105 PetscErrorCode SETERRMPI(MPI_Comm comm,PetscErrorCode ierr,char *message) 106 107 Collective 108 109 Input Parameters: 110 + comm - A communicator, use PETSC_COMM_SELF unless you know all ranks of another communicator will detect the error 111 . ierr - nonzero error code, see the list of standard error codes in include/petscerror.h 112 - message - error message 113 114 Level: developer 115 116 Notes: 117 This macro is FOR USE IN MPI CALLBACK FUNCTIONS ONLY, such as those passed to MPI_Comm_create_keyval(). It always returns the error code PETSC_MPI_ERROR_CODE 118 which is registered with MPI_Add_error_code() when PETSc is initialized. 119 120 .seealso: SETERRQ(), CHKERRQ(), CHKERRMPI(), PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), CHKERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ2(), SETERRQ3() 121 M*/ 122 #define SETERRMPI(comm,ierr,s) return (PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,ierr,PETSC_ERROR_INITIAL,s),PETSC_MPI_ERROR_CODE) 123 124 /*MC 125 SETERRQ1 - Macro that is called when an error has been detected, 126 127 Synopsis: 128 #include <petscsys.h> 129 PetscErrorCode SETERRQ1(MPI_Comm comm,PetscErrorCode ierr,char *formatmessage,arg) 130 131 Collective 132 133 Input Parameters: 134 + comm - A communicator, so that the error can be collective 135 . ierr - nonzero error code, see the list of standard error codes in include/petscerror.h 136 . message - error message in the printf format 137 - arg - argument (for example an integer, string or double) 138 139 Level: beginner 140 141 Notes: 142 Once the error handler is called the calling function is then returned from with the given error code. 143 144 Experienced users can set the error handler with PetscPushErrorHandler(). 145 146 .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), CHKERRQ(), CHKMEMQ, SETERRQ(), SETERRQ2(), SETERRQ3() 147 M*/ 148 #define SETERRQ1(comm,ierr,s,a1) return PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,ierr,PETSC_ERROR_INITIAL,s,a1) 149 150 /*MC 151 SETERRQ2 - Macro that is called when an error has been detected, 152 153 Synopsis: 154 #include <petscsys.h> 155 PetscErrorCode SETERRQ2(MPI_Comm comm,PetscErrorCode ierr,char *formatmessage,arg1,arg2) 156 157 Collective 158 159 Input Parameters: 160 + comm - A communicator, so that the error can be collective 161 . ierr - nonzero error code, see the list of standard error codes in include/petscerror.h 162 . message - error message in the printf format 163 . arg1 - argument (for example an integer, string or double) 164 - arg2 - argument (for example an integer, string or double) 165 166 Level: beginner 167 168 Notes: 169 Once the error handler is called the calling function is then returned from with the given error code. 170 171 Experienced users can set the error handler with PetscPushErrorHandler(). 172 173 .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), CHKERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ3() 174 M*/ 175 #define SETERRQ2(comm,ierr,s,a1,a2) return PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,ierr,PETSC_ERROR_INITIAL,s,a1,a2) 176 177 /*MC 178 SETERRQ3 - Macro that is called when an error has been detected, 179 180 Synopsis: 181 #include <petscsys.h> 182 PetscErrorCode SETERRQ3(MPI_Comm comm,PetscErrorCode ierr,char *formatmessage,arg1,arg2,arg3) 183 184 Collective 185 186 Input Parameters: 187 + comm - A communicator, so that the error can be collective 188 . ierr - nonzero error code, see the list of standard error codes in include/petscerror.h 189 . message - error message in the printf format 190 . arg1 - argument (for example an integer, string or double) 191 . arg2 - argument (for example an integer, string or double) 192 - arg3 - argument (for example an integer, string or double) 193 194 Level: beginner 195 196 Notes: 197 Once the error handler is called the calling function is then returned from with the given error code. 198 199 There are also versions for 4, 5, 6 and 7 arguments. 200 201 Experienced users can set the error handler with PetscPushErrorHandler(). 202 203 .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), CHKERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ2() 204 M*/ 205 #define SETERRQ3(comm,ierr,s,a1,a2,a3) return PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,ierr,PETSC_ERROR_INITIAL,s,a1,a2,a3) 206 207 /*MC 208 SETERRQ4 - Macro that is called when an error has been detected, 209 210 Synopsis: 211 #include <petscsys.h> 212 PetscErrorCode SETERRQ4(MPI_Comm comm,PetscErrorCode ierr,char *formatmessage,arg1,arg2,arg3,arg4) 213 214 Collective 215 216 Input Parameters: 217 + comm - A communicator, so that the error can be collective 218 . ierr - nonzero error code, see the list of standard error codes in include/petscerror.h 219 . message - error message in the printf format 220 . arg1 - argument (for example an integer, string or double) 221 . arg2 - argument (for example an integer, string or double) 222 . arg3 - argument (for example an integer, string or double) 223 - arg4 - argument (for example an integer, string or double) 224 225 Level: beginner 226 227 Notes: 228 Once the error handler is called the calling function is then returned from with the given error code. 229 230 There are also versions for 4, 5, 6 and 7 arguments. 231 232 Experienced users can set the error handler with PetscPushErrorHandler(). 233 234 .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), CHKERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ2() 235 M*/ 236 #define SETERRQ4(comm,ierr,s,a1,a2,a3,a4) return PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,ierr,PETSC_ERROR_INITIAL,s,a1,a2,a3,a4) 237 238 /*MC 239 SETERRQ5 - Macro that is called when an error has been detected, 240 241 Synopsis: 242 #include <petscsys.h> 243 PetscErrorCode SETERRQ5(MPI_Comm comm,PetscErrorCode ierr,char *formatmessage,arg1,arg2,arg3,arg4,arg5) 244 245 Collective 246 247 Input Parameters: 248 + comm - A communicator, so that the error can be collective 249 . ierr - nonzero error code, see the list of standard error codes in include/petscerror.h 250 . message - error message in the printf format 251 . arg1 - argument (for example an integer, string or double) 252 . arg2 - argument (for example an integer, string or double) 253 . arg3 - argument (for example an integer, string or double) 254 . arg4 - argument (for example an integer, string or double) 255 - arg5 - argument (for example an integer, string or double) 256 257 Level: beginner 258 259 Notes: 260 Once the error handler is called the calling function is then returned from with the given error code. 261 262 There are also versions for 4, 5, 6 and 7 arguments. 263 264 Experienced users can set the error handler with PetscPushErrorHandler(). 265 266 .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), CHKERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ2() 267 M*/ 268 #define SETERRQ5(comm,ierr,s,a1,a2,a3,a4,a5) return PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,ierr,PETSC_ERROR_INITIAL,s,a1,a2,a3,a4,a5) 269 270 /*MC 271 SETERRQ6 - Macro that is called when an error has been detected, 272 273 Synopsis: 274 #include <petscsys.h> 275 PetscErrorCode SETERRQ6(MPI_Comm comm,PetscErrorCode ierr,char *formatmessage,arg1,arg2,arg3,arg4,arg5,arg6) 276 277 Collective 278 279 Input Parameters: 280 + comm - A communicator, so that the error can be collective 281 . ierr - nonzero error code, see the list of standard error codes in include/petscerror.h 282 . message - error message in the printf format 283 . arg1 - argument (for example an integer, string or double) 284 . arg2 - argument (for example an integer, string or double) 285 . arg3 - argument (for example an integer, string or double) 286 . arg4 - argument (for example an integer, string or double) 287 . arg5 - argument (for example an integer, string or double) 288 - arg6 - argument (for example an integer, string or double) 289 290 Level: beginner 291 292 Notes: 293 Once the error handler is called the calling function is then returned from with the given error code. 294 295 There are also versions for 4, 5, 6 and 7 arguments. 296 297 Experienced users can set the error handler with PetscPushErrorHandler(). 298 299 .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), CHKERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ2() 300 M*/ 301 #define SETERRQ6(comm,ierr,s,a1,a2,a3,a4,a5,a6) return PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,ierr,PETSC_ERROR_INITIAL,s,a1,a2,a3,a4,a5,a6) 302 303 /*MC 304 SETERRQ7 - Macro that is called when an error has been detected, 305 306 Synopsis: 307 #include <petscsys.h> 308 PetscErrorCode SETERRQ7(MPI_Comm comm,PetscErrorCode ierr,char *formatmessage,arg1,arg2,arg3,arg4,arg5,arg6,arg7) 309 310 Collective 311 312 Input Parameters: 313 + comm - A communicator, so that the error can be collective 314 . ierr - nonzero error code, see the list of standard error codes in include/petscerror.h 315 . message - error message in the printf format 316 . arg1 - argument (for example an integer, string or double) 317 . arg2 - argument (for example an integer, string or double) 318 . arg3 - argument (for example an integer, string or double) 319 . arg4 - argument (for example an integer, string or double) 320 . arg5 - argument (for example an integer, string or double) 321 . arg6 - argument (for example an integer, string or double) 322 - arg7 - argument (for example an integer, string or double) 323 324 Level: beginner 325 326 Notes: 327 Once the error handler is called the calling function is then returned from with the given error code. 328 329 There are also versions for 4, 5, 6 and 7 arguments. 330 331 Experienced users can set the error handler with PetscPushErrorHandler(). 332 333 .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), CHKERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ2() 334 M*/ 335 #define SETERRQ7(comm,ierr,s,a1,a2,a3,a4,a5,a6,a7) return PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,ierr,PETSC_ERROR_INITIAL,s,a1,a2,a3,a4,a5,a6,a7) 336 337 /*MC 338 SETERRQ8 - Macro that is called when an error has been detected, 339 340 Synopsis: 341 #include <petscsys.h> 342 PetscErrorCode SETERRQ8(MPI_Comm comm,PetscErrorCode ierr,char *formatmessage,arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8) 343 344 Collective 345 346 Input Parameters: 347 + comm - A communicator, so that the error can be collective 348 . ierr - nonzero error code, see the list of standard error codes in include/petscerror.h 349 . message - error message in the printf format 350 . arg1 - argument (for example an integer, string or double) 351 . arg2 - argument (for example an integer, string or double) 352 . arg3 - argument (for example an integer, string or double) 353 . arg4 - argument (for example an integer, string or double) 354 . arg5 - argument (for example an integer, string or double) 355 . arg6 - argument (for example an integer, string or double) 356 . arg7 - argument (for example an integer, string or double) 357 - arg8 - argument (for example an integer, string or double) 358 359 Level: beginner 360 361 Notes: 362 Once the error handler is called the calling function is then returned from with the given error code. 363 364 There are also versions for 4, 5, 6 and 7 arguments. 365 366 Experienced users can set the error handler with PetscPushErrorHandler(). 367 368 .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), CHKERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ2() 369 M*/ 370 #define SETERRQ8(comm,ierr,s,a1,a2,a3,a4,a5,a6,a7,a8) return PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,ierr,PETSC_ERROR_INITIAL,s,a1,a2,a3,a4,a5,a6,a7,a8) 371 372 /*MC 373 SETERRQ9 - Macro that is called when an error has been detected, 374 375 Synopsis: 376 #include <petscsys.h> 377 PetscErrorCode SETERRQ9(MPI_Comm comm,PetscErrorCode ierr,char *formatmessage,arg1,arg2,arg3,arg4,arg5,arg6,arg7,arg8,arg9) 378 379 Collective 380 381 Input Parameters: 382 + comm - A communicator, so that the error can be collective 383 . ierr - nonzero error code, see the list of standard error codes in include/petscerror.h 384 . message - error message in the printf format 385 . arg1 - argument (for example an integer, string or double) 386 . arg2 - argument (for example an integer, string or double) 387 . arg3 - argument (for example an integer, string or double) 388 . arg4 - argument (for example an integer, string or double) 389 . arg5 - argument (for example an integer, string or double) 390 . arg6 - argument (for example an integer, string or double) 391 . arg7 - argument (for example an integer, string or double) 392 . arg8 - argument (for example an integer, string or double) 393 - arg9 - argument (for example an integer, string or double) 394 395 Level: beginner 396 397 Notes: 398 Once the error handler is called the calling function is then returned from with the given error code. 399 400 There are also versions for 0 to 9 arguments. 401 402 Experienced users can set the error handler with PetscPushErrorHandler(). 403 404 .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), CHKERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ2() 405 M*/ 406 #define SETERRQ9(comm,ierr,s,a1,a2,a3,a4,a5,a6,a7,a8,a9) return PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,ierr,PETSC_ERROR_INITIAL,s,a1,a2,a3,a4,a5,a6,a7,a8,a9) 407 408 /*MC 409 SETERRABORT - Macro that can be called when an error has been detected, 410 411 Synopsis: 412 #include <petscsys.h> 413 PetscErrorCode SETERRABORT(MPI_Comm comm,PetscErrorCode ierr,char *message) 414 415 Collective 416 417 Input Parameters: 418 + comm - A communicator, so that the error can be collective 419 . ierr - nonzero error code, see the list of standard error codes in include/petscerror.h 420 - message - error message in the printf format 421 422 Level: beginner 423 424 Notes: 425 This function just calls MPI_Abort(). 426 427 .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), CHKERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ2() 428 M*/ 429 #define SETERRABORT(comm,ierr,s) do {PetscError(comm,__LINE__,PETSC_FUNCTION_NAME,__FILE__,ierr,PETSC_ERROR_INITIAL,s);MPI_Abort(comm,ierr);} while (0) 430 431 /*MC 432 CHKERRQ - Checks error code, if non-zero it calls the error handler and then returns 433 434 Synopsis: 435 #include <petscsys.h> 436 PetscErrorCode CHKERRQ(PetscErrorCode ierr) 437 438 Not Collective 439 440 Input Parameters: 441 . ierr - nonzero error code, see the list of standard error codes in include/petscerror.h 442 443 Level: beginner 444 445 Notes: 446 Once the error handler is called the calling function is then returned from with the given error code. 447 448 Experienced users can set the error handler with PetscPushErrorHandler(). 449 450 CHKERRQ(ierr) is fundamentally a macro replacement for 451 if (ierr) return(PetscError(...,ierr,...)); 452 453 Although typical usage resembles "void CHKERRQ(PetscErrorCode)" as described above, for certain uses it is 454 highly inappropriate to use it in this manner as it invokes return(PetscErrorCode). In particular, 455 it cannot be used in functions which return(void) or any other datatype. In these types of functions, 456 you can use CHKERRV() which returns without an error code (bad idea since the error is ignored or 457 if (ierr) {PetscError(....); return(YourReturnType);} 458 where you may pass back a NULL to indicate an error. You can also call CHKERRABORT(comm,n) to have 459 MPI_Abort() returned immediately. 460 461 .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), SETERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ2(), SETERRQ2() 462 M*/ 463 #define CHKERRQ(ierr) do {PetscErrorCode ierr__ = (ierr); if (PetscUnlikely(ierr__)) return PetscError(PETSC_COMM_SELF,__LINE__,PETSC_FUNCTION_NAME,__FILE__,ierr__,PETSC_ERROR_REPEAT," ");} while (0) 464 #define CHKERRV(ierr) do {PetscErrorCode ierr__ = (ierr); if (PetscUnlikely(ierr__)) {PetscError(PETSC_COMM_SELF,__LINE__,PETSC_FUNCTION_NAME,__FILE__,ierr__,PETSC_ERROR_REPEAT," ");return;}} while (0) 465 #define CHKERRABORT(comm,ierr) do {PetscErrorCode ierr__ = (ierr); if (PetscUnlikely(ierr__)) {PetscError(PETSC_COMM_SELF,__LINE__,PETSC_FUNCTION_NAME,__FILE__,ierr__,PETSC_ERROR_REPEAT," ");MPI_Abort(comm,ierr);}} while (0) 466 #define CHKERRCONTINUE(ierr) do {PetscErrorCode ierr__ = (ierr); if (PetscUnlikely(ierr__)) {PetscError(PETSC_COMM_SELF,__LINE__,PETSC_FUNCTION_NAME,__FILE__,ierr__,PETSC_ERROR_REPEAT," ");}} while (0) 467 468 PETSC_EXTERN PetscErrorCode PetscAbortFindSourceFile_Private(const char*,PetscInt*); 469 470 /*MC 471 PETSCABORT - Call MPI_Abort with an informative error code 472 473 Synopsis: 474 #include <petscsys.h> 475 PETSCABORT(MPI_Comm comm, PetscErrorCode ierr) 476 477 Collective 478 479 Input Parameters: 480 + comm - A communicator, so that the error can be collective 481 - ierr - nonzero error code, see the list of standard error codes in include/petscerror.h 482 483 Level: beginner 484 485 Notes: We pass MPI_Abort() an error code of format XX_YYYY_ZZZ, where XX, YYYY are an index and line number of the file 486 where PETSCABORT is called, respectively. ZZZ is the PETSc error code. 487 488 If XX is zero, this means that the call was made in the routine main(). 489 If XX is one, that means 1) the file is not in PETSc (it may be in users code); OR 2) the file is in PETSc but PetscAbortSourceFiles[] 490 is out of date. PETSc developers have to update it. 491 Otherwise, look up the value of XX in the table PetscAbortSourceFiles[] in src/sys/error/err.c to map XX back to the source file where the PETSCABORT() was called. 492 493 M*/ 494 #define PETSCABORT(comm,ierr) \ 495 do { \ 496 PetscInt idx = 0; \ 497 PetscMPIInt errcode; \ 498 PetscAbortFindSourceFile_Private(__FILE__,&idx); \ 499 errcode = (PetscMPIInt)(idx*10000000 + __LINE__*1000 + ierr); \ 500 MPI_Abort(comm,errcode); \ 501 } while (0) 502 503 /*MC 504 CHKERRMPI - Checks error code, if non-zero it calls the error handler and then returns 505 506 Synopsis: 507 #include <petscsys.h> 508 PetscErrorCode CHKERRMPI(PetscErrorCode ierr) 509 510 Not Collective 511 512 Input Parameters: 513 . ierr - nonzero error code, see the list of standard error codes in include/petscerror.h 514 515 Level: developer 516 517 Notes: 518 This macro is FOR USE IN MPI CALLBACK FUNCTIONS ONLY, such as those passed to MPI_Comm_create_keyval(). It always returns the error code PETSC_MPI_ERROR_CODE 519 which is registered with MPI_Add_error_code() when PETSc is initialized. 520 521 .seealso: CHKERRQ(), PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), SETERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ2(), SETERRQ2() 522 M*/ 523 #define CHKERRMPI(ierr) do {if (PetscUnlikely(ierr)) return (PetscError(PETSC_COMM_SELF,__LINE__,PETSC_FUNCTION_NAME,__FILE__,ierr,PETSC_ERROR_REPEAT," "),PETSC_MPI_ERROR_CODE);} while (0) 524 525 #ifdef PETSC_CLANGUAGE_CXX 526 527 /*MC 528 CHKERRXX - Checks error code, if non-zero it calls the C++ error handler which throws an exception 529 530 Synopsis: 531 #include <petscsys.h> 532 void CHKERRXX(PetscErrorCode ierr) 533 534 Not Collective 535 536 Input Parameters: 537 . ierr - nonzero error code, see the list of standard error codes in include/petscerror.h 538 539 Level: beginner 540 541 Notes: 542 Once the error handler throws a ??? exception. 543 544 You can use CHKERRV() which returns without an error code (bad idea since the error is ignored) 545 or CHKERRABORT(comm,n) to have MPI_Abort() returned immediately. 546 547 .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), SETERRQ(), CHKERRQ(), CHKMEMQ 548 M*/ 549 #define CHKERRXX(ierr) do {if (PetscUnlikely(ierr)) {PetscError(PETSC_COMM_SELF,__LINE__,PETSC_FUNCTION_NAME,__FILE__,ierr,PETSC_ERROR_IN_CXX,0);}} while (0) 550 551 #endif 552 553 #if defined(PETSC_HAVE_CUDA) 554 #define CHKERRCUSOLVER(err) do {if (PetscUnlikely(err)) SETERRQ1(PETSC_COMM_SELF,PETSC_ERR_LIB,"CUSOLVER error %d",err);} while (0) 555 #endif 556 /*MC 557 CHKMEMQ - Checks the memory for corruption, calls error handler if any is detected 558 559 Synopsis: 560 #include <petscsys.h> 561 CHKMEMQ; 562 563 Not Collective 564 565 Level: beginner 566 567 Notes: 568 We highly recommend using valgrind https://www.mcs.anl.gov/petsc/documentation/faq.html#valgrind for finding memory problems. This is useful 569 on systems that do not have valgrind, but much much less useful. 570 571 Must run with the option -malloc_debug (-malloc_test in debug mode; or if PetscMallocSetDebug() called) to enable this option 572 573 Once the error handler is called the calling function is then returned from with the given error code. 574 575 By defaults prints location where memory that is corrupted was allocated. 576 577 Use CHKMEMA for functions that return void 578 579 .seealso: PetscTraceBackErrorHandler(), PetscPushErrorHandler(), PetscError(), SETERRQ(), CHKMEMQ, SETERRQ1(), SETERRQ2(), SETERRQ3(), 580 PetscMallocValidate() 581 M*/ 582 #define CHKMEMQ do {PetscErrorCode _7_ierr = PetscMallocValidate(__LINE__,PETSC_FUNCTION_NAME,__FILE__);CHKERRQ(_7_ierr);} while (0) 583 584 #define CHKMEMA PetscMallocValidate(__LINE__,PETSC_FUNCTION_NAME,__FILE__) 585 586 /*E 587 PetscErrorType - passed to the PETSc error handling routines indicating if this is the first or a later call to the error handlers 588 589 Level: advanced 590 591 PETSC_ERROR_IN_CXX indicates the error was detected in C++ and an exception should be generated 592 593 Developer Notes: 594 This is currently used to decide when to print the detailed information about the run in PetscTraceBackErrorHandler() 595 596 .seealso: PetscError(), SETERRXX() 597 E*/ 598 typedef enum {PETSC_ERROR_INITIAL=0,PETSC_ERROR_REPEAT=1,PETSC_ERROR_IN_CXX = 2} PetscErrorType; 599 600 #if defined(__clang_analyzer__) 601 __attribute__((analyzer_noreturn)) 602 #endif 603 PETSC_EXTERN PetscErrorCode PetscError(MPI_Comm,int,const char*,const char*,PetscErrorCode,PetscErrorType,const char*,...); 604 605 PETSC_EXTERN PetscErrorCode PetscErrorPrintfInitialize(void); 606 PETSC_EXTERN PetscErrorCode PetscErrorMessage(int,const char*[],char **); 607 PETSC_EXTERN PetscErrorCode PetscTraceBackErrorHandler(MPI_Comm,int,const char*,const char*,PetscErrorCode,PetscErrorType,const char*,void*); 608 PETSC_EXTERN PetscErrorCode PetscIgnoreErrorHandler(MPI_Comm,int,const char*,const char*,PetscErrorCode,PetscErrorType,const char*,void*); 609 PETSC_EXTERN PetscErrorCode PetscEmacsClientErrorHandler(MPI_Comm,int,const char*,const char*,PetscErrorCode,PetscErrorType,const char*,void*); 610 PETSC_EXTERN PetscErrorCode PetscMPIAbortErrorHandler(MPI_Comm,int,const char*,const char*,PetscErrorCode,PetscErrorType,const char*,void*); 611 PETSC_EXTERN PetscErrorCode PetscAbortErrorHandler(MPI_Comm,int,const char*,const char*,PetscErrorCode,PetscErrorType,const char*,void*); 612 PETSC_EXTERN PetscErrorCode PetscAttachDebuggerErrorHandler(MPI_Comm,int,const char*,const char*,PetscErrorCode,PetscErrorType,const char*,void*); 613 PETSC_EXTERN PetscErrorCode PetscReturnErrorHandler(MPI_Comm,int,const char*,const char*,PetscErrorCode,PetscErrorType,const char*,void*); 614 PETSC_EXTERN PetscErrorCode PetscPushErrorHandler(PetscErrorCode (*handler)(MPI_Comm,int,const char*,const char*,PetscErrorCode,PetscErrorType,const char*,void*),void*); 615 PETSC_EXTERN PetscErrorCode PetscPopErrorHandler(void); 616 PETSC_EXTERN PetscErrorCode PetscSignalHandlerDefault(int,void*); 617 PETSC_EXTERN PetscErrorCode PetscPushSignalHandler(PetscErrorCode (*)(int,void *),void*); 618 PETSC_EXTERN PetscErrorCode PetscPopSignalHandler(void); 619 PETSC_EXTERN PetscErrorCode PetscCheckPointerSetIntensity(PetscInt); 620 PETSC_EXTERN void PetscSignalSegvCheckPointerOrMpi(void); 621 PETSC_DEPRECATED_FUNCTION("Use PetscSignalSegvCheckPointerOrMpi() (since version 3.13)") PETSC_STATIC_INLINE void PetscSignalSegvCheckPointer(void) {PetscSignalSegvCheckPointerOrMpi();} 622 623 /*MC 624 PetscErrorPrintf - Prints error messages. 625 626 Synopsis: 627 #include <petscsys.h> 628 PetscErrorCode (*PetscErrorPrintf)(const char format[],...); 629 630 Not Collective 631 632 Input Parameters: 633 . format - the usual printf() format string 634 635 Options Database Keys: 636 + -error_output_stdout - cause error messages to be printed to stdout instead of the (default) stderr 637 - -error_output_none - to turn off all printing of error messages (does not change the way the error is handled.) 638 639 Notes: 640 Use 641 $ PetscErrorPrintf = PetscErrorPrintfNone; to turn off all printing of error messages (does not change the way the 642 $ error is handled.) and 643 $ PetscErrorPrintf = PetscErrorPrintfDefault; to turn it back on or you can use your own function 644 645 Use 646 PETSC_STDERR = FILE* obtained from a file open etc. to have stderr printed to the file. 647 PETSC_STDOUT = FILE* obtained from a file open etc. to have stdout printed to the file. 648 649 Use 650 PetscPushErrorHandler() to provide your own error handler that determines what kind of messages to print 651 652 Level: developer 653 654 Fortran Note: 655 This routine is not supported in Fortran. 656 657 658 .seealso: PetscFPrintf(), PetscSynchronizedPrintf(), PetscHelpPrintf(), PetscPrintf(), PetscPushErrorHandler(), PetscVFPrintf(), PetscHelpPrintf() 659 M*/ 660 PETSC_EXTERN PetscErrorCode (*PetscErrorPrintf)(const char[],...); 661 662 typedef enum {PETSC_FP_TRAP_OFF=0,PETSC_FP_TRAP_ON=1} PetscFPTrap; 663 PETSC_EXTERN PetscErrorCode PetscSetFPTrap(PetscFPTrap); 664 PETSC_EXTERN PetscErrorCode PetscFPTrapPush(PetscFPTrap); 665 PETSC_EXTERN PetscErrorCode PetscFPTrapPop(void); 666 PETSC_EXTERN PetscErrorCode PetscDetermineInitialFPTrap(void); 667 668 /* 669 Allows the code to build a stack frame as it runs 670 */ 671 672 #define PETSCSTACKSIZE 64 673 674 typedef struct { 675 const char *function[PETSCSTACKSIZE]; 676 const char *file[PETSCSTACKSIZE]; 677 int line[PETSCSTACKSIZE]; 678 PetscBool petscroutine[PETSCSTACKSIZE]; 679 int currentsize; 680 int hotdepth; 681 } PetscStack; 682 683 PETSC_EXTERN PetscStack *petscstack; 684 685 PetscErrorCode PetscStackCopy(PetscStack*,PetscStack*); 686 PetscErrorCode PetscStackPrint(PetscStack *,FILE*); 687 #if defined(PETSC_SERIALIZE_FUNCTIONS) 688 #include <petsc/private/petscfptimpl.h> 689 /* 690 Registers the current function into the global function pointer to function name table 691 692 Have to fix this to handle errors but cannot return error since used in PETSC_VIEWER_DRAW_() etc 693 */ 694 #define PetscRegister__FUNCT__() do { \ 695 static PetscBool __chked = PETSC_FALSE; \ 696 if (!__chked) {\ 697 void *ptr; PetscDLSym(NULL,PETSC_FUNCTION_NAME,&ptr);\ 698 __chked = PETSC_TRUE;\ 699 }} while (0) 700 #else 701 #define PetscRegister__FUNCT__() 702 #endif 703 704 #if defined(PETSC_USE_DEBUG) 705 PETSC_STATIC_INLINE PetscBool PetscStackActive(void) 706 { 707 return(petscstack ? PETSC_TRUE : PETSC_FALSE); 708 } 709 710 /* Stack handling is based on the following two "NoCheck" macros. These should only be called directly by other error 711 * handling macros. We record the line of the call, which may or may not be the location of the definition. But is at 712 * least more useful than "unknown" because it can distinguish multiple calls from the same function. 713 */ 714 715 #define PetscStackPushNoCheck(funct,petsc_routine,hot) \ 716 do { \ 717 PetscStackSAWsTakeAccess(); \ 718 if (petscstack && (petscstack->currentsize < PETSCSTACKSIZE)) { \ 719 petscstack->function[petscstack->currentsize] = funct; \ 720 petscstack->file[petscstack->currentsize] = __FILE__; \ 721 petscstack->line[petscstack->currentsize] = __LINE__; \ 722 petscstack->petscroutine[petscstack->currentsize] = petsc_routine; \ 723 petscstack->currentsize++; \ 724 } \ 725 if (petscstack) { \ 726 petscstack->hotdepth += (hot || petscstack->hotdepth); \ 727 } \ 728 PetscStackSAWsGrantAccess(); \ 729 } while (0) 730 731 #define PetscStackPopNoCheck \ 732 do { \ 733 PetscStackSAWsTakeAccess(); \ 734 if (petscstack && petscstack->currentsize > 0) { \ 735 petscstack->currentsize--; \ 736 petscstack->function[petscstack->currentsize] = NULL; \ 737 petscstack->file[petscstack->currentsize] = NULL; \ 738 petscstack->line[petscstack->currentsize] = 0; \ 739 petscstack->petscroutine[petscstack->currentsize] = PETSC_FALSE;\ 740 } \ 741 if (petscstack) { \ 742 petscstack->hotdepth = PetscMax(petscstack->hotdepth-1,0); \ 743 } \ 744 PetscStackSAWsGrantAccess(); \ 745 } while (0) 746 747 /*MC 748 PetscFunctionBegin - First executable line of each PETSc function, used for error handling. Final 749 line of PETSc functions should be PetscFunctionReturn(0); 750 751 Synopsis: 752 #include <petscsys.h> 753 void PetscFunctionBegin; 754 755 Not Collective 756 757 Usage: 758 .vb 759 int something; 760 761 PetscFunctionBegin; 762 .ve 763 764 Notes: 765 Use PetscFunctionBeginUser for application codes. 766 767 Not available in Fortran 768 769 Level: developer 770 771 .seealso: PetscFunctionReturn(), PetscFunctionBeginHot(), PetscFunctionBeginUser() 772 773 M*/ 774 #define PetscFunctionBegin do { \ 775 PetscStackPushNoCheck(PETSC_FUNCTION_NAME,PETSC_TRUE,PETSC_FALSE); \ 776 PetscRegister__FUNCT__(); \ 777 } while (0) 778 779 /*MC 780 PetscFunctionBeginHot - Substitute for PetscFunctionBegin to be used in functions that are called in 781 performance-critical circumstances. Use of this function allows for lighter profiling by default. 782 783 Synopsis: 784 #include <petscsys.h> 785 void PetscFunctionBeginHot; 786 787 Not Collective 788 789 Usage: 790 .vb 791 int something; 792 793 PetscFunctionBeginHot; 794 .ve 795 796 Notes: 797 Not available in Fortran 798 799 Level: developer 800 801 .seealso: PetscFunctionBegin, PetscFunctionReturn() 802 803 M*/ 804 #define PetscFunctionBeginHot do { \ 805 PetscStackPushNoCheck(PETSC_FUNCTION_NAME,PETSC_TRUE,PETSC_TRUE); \ 806 PetscRegister__FUNCT__(); \ 807 } while (0) 808 809 /*MC 810 PetscFunctionBeginUser - First executable line of user provided PETSc routine 811 812 Synopsis: 813 #include <petscsys.h> 814 void PetscFunctionBeginUser; 815 816 Not Collective 817 818 Usage: 819 .vb 820 int something; 821 822 PetscFunctionBeginUser; 823 .ve 824 825 Notes: 826 Final line of PETSc functions should be PetscFunctionReturn(0) except for main(). 827 828 Not available in Fortran 829 830 This is identical to PetscFunctionBegin except it labels the routine as a user 831 routine instead of as a PETSc library routine. 832 833 Level: intermediate 834 835 .seealso: PetscFunctionReturn(), PetscFunctionBegin, PetscFunctionBeginHot 836 837 M*/ 838 #define PetscFunctionBeginUser \ 839 do { \ 840 PetscStackPushNoCheck(PETSC_FUNCTION_NAME,PETSC_FALSE,PETSC_FALSE); \ 841 PetscRegister__FUNCT__(); \ 842 } while (0) 843 844 845 #define PetscStackPush(n) \ 846 do { \ 847 PetscStackPushNoCheck(n,PETSC_FALSE,PETSC_FALSE); \ 848 CHKMEMQ; \ 849 } while (0) 850 851 #define PetscStackPop \ 852 do { \ 853 CHKMEMQ; \ 854 PetscStackPopNoCheck; \ 855 } while (0) 856 857 /*MC 858 PetscFunctionReturn - Last executable line of each PETSc function 859 used for error handling. Replaces return() 860 861 Synopsis: 862 #include <petscsys.h> 863 void PetscFunctionReturn(0); 864 865 Not Collective 866 867 Usage: 868 .vb 869 .... 870 PetscFunctionReturn(0); 871 } 872 .ve 873 874 Notes: 875 Not available in Fortran 876 877 Level: developer 878 879 .seealso: PetscFunctionBegin() 880 881 M*/ 882 #define PetscFunctionReturn(a) \ 883 do { \ 884 PetscStackPopNoCheck; \ 885 return(a);} while (0) 886 887 #define PetscFunctionReturnVoid() \ 888 do { \ 889 PetscStackPopNoCheck; \ 890 return;} while (0) 891 892 #else 893 894 PETSC_STATIC_INLINE PetscBool PetscStackActive(void) {return PETSC_FALSE;} 895 #define PetscStackPushNoCheck(funct,petsc_routine,hot) do {} while (0) 896 #define PetscStackPopNoCheck do {} while (0) 897 #define PetscFunctionBegin 898 #define PetscFunctionBeginUser 899 #define PetscFunctionBeginHot 900 #define PetscFunctionReturn(a) return(a) 901 #define PetscFunctionReturnVoid() return 902 #define PetscStackPop CHKMEMQ 903 #define PetscStackPush(f) CHKMEMQ 904 905 #endif 906 907 /* 908 PetscStackCall - Calls an external library routine or user function after pushing the name of the routine on the stack. 909 910 Input Parameters: 911 + name - string that gives the name of the function being called 912 - routine - actual call to the routine, including ierr = and CHKERRQ(ierr); 913 914 Note: Often one should use PetscStackCallStandard() instead. This routine is intended for external library routines that DO NOT return error codes 915 916 Developer Note: this is so that when a user or external library routine results in a crash or corrupts memory, they get blamed instead of PETSc. 917 918 919 920 */ 921 #define PetscStackCall(name,routine) do { PetscStackPush(name);routine;PetscStackPop; } while (0) 922 923 /* 924 PetscStackCallStandard - Calls an external library routine after pushing the name of the routine on the stack. 925 926 Input Parameters: 927 + func- name of the routine 928 - args - arguments to the routine surrounded by () 929 930 Notes: 931 This is intended for external package routines that return error codes. Use PetscStackCall() for those that do not. 932 933 Developer Note: this is so that when an external packge routine results in a crash or corrupts memory, they get blamed instead of PETSc. 934 935 */ 936 #define PetscStackCallStandard(func,args) do { \ 937 PetscErrorCode __ierr; \ 938 PetscStackPush(#func); \ 939 __ierr = func args; \ 940 PetscStackPop; \ 941 if (__ierr) SETERRQ2(PETSC_COMM_SELF,PETSC_ERR_LIB,"Error in %s(): error code %d",#func,(int)__ierr); \ 942 } while (0) 943 944 PETSC_EXTERN PetscErrorCode PetscStackCreate(void); 945 PETSC_EXTERN PetscErrorCode PetscStackView(FILE*); 946 PETSC_EXTERN PetscErrorCode PetscStackDestroy(void); 947 948 #endif 949