1 /* Portions of this code are under: 2 Copyright (c) 2022 Advanced Micro Devices, Inc. All rights reserved. 3 */ 4 5 #pragma once 6 7 #include <petscconf.h> 8 #include <petscconf_poison.h> 9 #include <petscfix.h> 10 #include <petscmacros.h> // PETSC_NODISCARD, PETSC_CPP_VERSION 11 #include <stddef.h> 12 13 /* SUBMANSEC = Sys */ 14 15 #include <limits.h> // INT_MIN, INT_MAX, CHAR_BIT 16 17 #if defined(__clang__) || (PETSC_CPP_VERSION >= 17) 18 // clang allows both [[nodiscard]] and __attribute__((warn_unused_result)) on type 19 // definitions. GCC, however, does not, so check that we are using C++17 [[nodiscard]] 20 // instead of __attribute__((warn_unused_result)) 21 #define PETSC_ERROR_CODE_NODISCARD PETSC_NODISCARD 22 #else 23 #define PETSC_ERROR_CODE_NODISCARD 24 #endif 25 26 #ifdef PETSC_CLANG_STATIC_ANALYZER 27 #undef PETSC_USE_STRICT_PETSCERRORCODE 28 #endif 29 30 #ifdef PETSC_USE_STRICT_PETSCERRORCODE 31 #define PETSC_ERROR_CODE_TYPEDEF typedef 32 #define PETSC_ERROR_CODE_ENUM_NAME PetscErrorCode 33 #else 34 #define PETSC_ERROR_CODE_TYPEDEF 35 #define PETSC_ERROR_CODE_ENUM_NAME 36 #endif 37 38 /*E 39 PetscErrorCode - Datatype used to return PETSc error codes. 40 41 Level: beginner 42 43 Notes: 44 Virtually all PETSc functions return an error code. It is the callers responsibility to check 45 the value of the returned error code after each PETSc call to determine if any errors 46 occurred. A set of convenience macros (e.g. `PetscCall()`, `PetscCallVoid()`) are provided 47 for this purpose. Failing to properly check for errors is not supported, as errors may leave 48 PETSc in an undetermined state. 49 50 One can retrieve the error string corresponding to a particular error code using 51 `PetscErrorMessage()`. 52 53 The user can also configure PETSc with the `--with-strict-petscerrorcode` option to enable 54 compiler warnings when the returned error codes are not captured and checked. Users are 55 *heavily* encouraged to opt-in to this option, as it will become enabled by default in a 56 future release. 57 58 Developer Notes: 59 These are the generic error codes. These error codes are used in many different places in the 60 PETSc source code. The C-string versions are at defined in `PetscErrorStrings[]` in 61 `src/sys/error/err.c`, while the Fortran versions are defined in 62 `src/sys/f90-mod/petscerror.h`. Any changes here must also be made in both locations. 63 64 .seealso: `PetscErrorMessage()`, `PetscCall()`, `SETERRQ()` 65 E*/ 66 PETSC_ERROR_CODE_TYPEDEF enum PETSC_ERROR_CODE_NODISCARD { 67 PETSC_SUCCESS = 0, 68 PETSC_ERR_BOOLEAN_MACRO_FAILURE = 1, /* do not use */ 69 70 PETSC_ERR_MIN_VALUE = 54, /* should always be one less than the smallest value */ 71 72 PETSC_ERR_MEM = 55, /* unable to allocate requested memory */ 73 PETSC_ERR_SUP = 56, /* no support for requested operation */ 74 PETSC_ERR_SUP_SYS = 57, /* no support for requested operation on this computer system */ 75 PETSC_ERR_ORDER = 58, /* operation done in wrong order */ 76 PETSC_ERR_SIG = 59, /* signal received */ 77 PETSC_ERR_FP = 72, /* floating point exception */ 78 PETSC_ERR_COR = 74, /* corrupted PETSc object */ 79 PETSC_ERR_LIB = 76, /* error in library called by PETSc */ 80 PETSC_ERR_PLIB = 77, /* PETSc library generated inconsistent data */ 81 PETSC_ERR_MEMC = 78, /* memory corruption */ 82 PETSC_ERR_CONV_FAILED = 82, /* iterative method (KSP or SNES) failed */ 83 PETSC_ERR_USER = 83, /* user has not provided needed function */ 84 PETSC_ERR_SYS = 88, /* error in system call */ 85 PETSC_ERR_POINTER = 70, /* pointer does not point to valid address */ 86 PETSC_ERR_MPI_LIB_INCOMP = 87, /* MPI library at runtime is not compatible with MPI user compiled with */ 87 88 PETSC_ERR_ARG_SIZ = 60, /* nonconforming object sizes used in operation */ 89 PETSC_ERR_ARG_IDN = 61, /* two arguments not allowed to be the same */ 90 PETSC_ERR_ARG_WRONG = 62, /* wrong argument (but object probably ok) */ 91 PETSC_ERR_ARG_CORRUPT = 64, /* null or corrupted PETSc object as argument */ 92 PETSC_ERR_ARG_OUTOFRANGE = 63, /* input argument, out of range */ 93 PETSC_ERR_ARG_BADPTR = 68, /* invalid pointer argument */ 94 PETSC_ERR_ARG_NOTSAMETYPE = 69, /* two args must be same object type */ 95 PETSC_ERR_ARG_NOTSAMECOMM = 80, /* two args must be same communicators */ 96 PETSC_ERR_ARG_WRONGSTATE = 73, /* object in argument is in wrong state, e.g. unassembled mat */ 97 PETSC_ERR_ARG_TYPENOTSET = 89, /* the type of the object has not yet been set */ 98 PETSC_ERR_ARG_INCOMP = 75, /* two arguments are incompatible */ 99 PETSC_ERR_ARG_NULL = 85, /* argument is null that should not be */ 100 PETSC_ERR_ARG_UNKNOWN_TYPE = 86, /* type name doesn't match any registered type */ 101 102 PETSC_ERR_FILE_OPEN = 65, /* unable to open file */ 103 PETSC_ERR_FILE_READ = 66, /* unable to read from file */ 104 PETSC_ERR_FILE_WRITE = 67, /* unable to write to file */ 105 PETSC_ERR_FILE_UNEXPECTED = 79, /* unexpected data in file */ 106 107 PETSC_ERR_MAT_LU_ZRPVT = 71, /* detected a zero pivot during LU factorization */ 108 PETSC_ERR_MAT_CH_ZRPVT = 81, /* detected a zero pivot during Cholesky factorization */ 109 110 PETSC_ERR_INT_OVERFLOW = 84, 111 PETSC_ERR_FLOP_COUNT = 90, 112 PETSC_ERR_NOT_CONVERGED = 91, /* solver did not converge */ 113 PETSC_ERR_MISSING_FACTOR = 92, /* MatGetFactor() failed */ 114 PETSC_ERR_OPT_OVERWRITE = 93, /* attempted to over write options which should not be changed */ 115 PETSC_ERR_WRONG_MPI_SIZE = 94, /* example/application run with number of MPI ranks it does not support */ 116 PETSC_ERR_USER_INPUT = 95, /* missing or incorrect user input */ 117 PETSC_ERR_GPU_RESOURCE = 96, /* unable to load a GPU resource, for example cuBLAS */ 118 PETSC_ERR_GPU = 97, /* An error from a GPU call, this may be due to lack of resources on the GPU or a true error in the call */ 119 PETSC_ERR_MPI = 98, /* general MPI error */ 120 PETSC_ERR_RETURN = 99, /* PetscError() incorrectly returned an error code of 0 */ 121 PETSC_ERR_MEM_LEAK = 100, /* memory alloc/free imbalance */ 122 PETSC_ERR_MAX_VALUE = 101, /* this is always the one more than the largest error code */ 123 124 /* 125 do not use, exist purely to make the enum bounds equal that of a regular int (so conversion 126 to int in main() is not undefined behavior) 127 */ 128 PETSC_ERR_MIN_SIGNED_BOUND_DO_NOT_USE = INT_MIN, 129 PETSC_ERR_MAX_SIGNED_BOUND_DO_NOT_USE = INT_MAX 130 } PETSC_ERROR_CODE_ENUM_NAME; 131 132 #ifndef PETSC_USE_STRICT_PETSCERRORCODE 133 typedef int PetscErrorCode; 134 135 /* 136 Needed so that C++ lambdas can deduce the return type as PetscErrorCode from 137 PetscFunctionReturn(PETSC_SUCCESS). Otherwise we get 138 139 error: return type '(unnamed enum at include/petscsystypes.h:50:1)' must match previous 140 return type 'int' when lambda expression has unspecified explicit return type 141 PetscFunctionReturn(PETSC_SUCCESS); 142 ^ 143 */ 144 #define PETSC_SUCCESS ((PetscErrorCode)0) 145 #endif 146 147 #undef PETSC_ERROR_CODE_NODISCARD 148 #undef PETSC_ERROR_CODE_TYPEDEF 149 #undef PETSC_ERROR_CODE_ENUM_NAME 150 151 /*MC 152 PetscClassId - A unique id used to identify each PETSc class. 153 154 Level: developer 155 156 Note: 157 Use `PetscClassIdRegister()` to obtain a new value for a new class being created. Usually 158 XXXInitializePackage() calls it for each class it defines. 159 160 Developer Note: 161 Internal integer stored in the `_p_PetscObject` data structure. These are all computed by an offset from the lowest one, `PETSC_SMALLEST_CLASSID`. 162 163 .seealso: `PetscClassIdRegister()`, `PetscLogEventRegister()`, `PetscHeaderCreate()` 164 M*/ 165 typedef int PetscClassId; 166 167 /*MC 168 PetscMPIInt - datatype used to represent 'int' parameters to MPI functions. 169 170 Level: intermediate 171 172 Notes: 173 This is always a 32-bit integer, sometimes it is the same as `PetscInt`, but if PETSc was built with `--with-64-bit-indices` but 174 standard C/Fortran integers are 32-bit then this is NOT the same as `PetscInt`; it remains 32-bit. 175 176 `PetscMPIIntCast`(a,&b) checks if the given `PetscInt` a will fit in a `PetscMPIInt`, if not it 177 generates a `PETSC_ERR_ARG_OUTOFRANGE` error. 178 179 .seealso: [](stylePetscCount), `PetscBLASInt`, `PetscInt`, `PetscMPIIntCast()` 180 M*/ 181 typedef int PetscMPIInt; 182 183 /* Limit MPI to 32-bits */ 184 enum { 185 PETSC_MPI_INT_MIN = INT_MIN, 186 PETSC_MPI_INT_MAX = INT_MAX 187 }; 188 189 /*MC 190 PetscSizeT - datatype used to represent sizes in memory (like `size_t`) 191 192 Level: intermediate 193 194 Notes: 195 This is equivalent to `size_t`, but defined for consistency with Fortran, which lacks a native equivalent of `size_t`. 196 197 .seealso: `PetscInt`, `PetscInt64`, `PetscCount` 198 M*/ 199 typedef size_t PetscSizeT; 200 201 /*MC 202 PetscCount - signed datatype used to represent counts 203 204 Level: intermediate 205 206 Notes: 207 This is equivalent to `ptrdiff_t`, but defined for consistency with Fortran, which lacks a native equivalent of `ptrdiff_t`. 208 209 Use `PetscCount_FMT` to format with `PetscPrintf()`, `printf()`, and related functions. 210 211 .seealso: [](stylePetscCount), `PetscInt`, `PetscInt64`, `PetscSizeT` 212 M*/ 213 typedef ptrdiff_t PetscCount; 214 #define PetscCount_FMT "td" 215 216 /*MC 217 PetscEnum - datatype used to pass enum types within PETSc functions. 218 219 Level: intermediate 220 221 .seealso: `PetscOptionsGetEnum()`, `PetscOptionsEnum()`, `PetscBagRegisterEnum()` 222 M*/ 223 typedef enum { 224 ENUM_DUMMY 225 } PetscEnum; 226 227 typedef short PetscShort; 228 typedef char PetscChar; 229 typedef float PetscFloat; 230 231 /*MC 232 PetscInt - PETSc type that represents an integer, used primarily to 233 represent size of arrays and indexing into arrays. Its size can be configured with the option `--with-64-bit-indices` to be either 32-bit (default) or 64-bit. 234 235 Level: beginner 236 237 Notes: 238 For MPI calls that require datatypes, use `MPIU_INT` as the datatype for `PetscInt`. It will automatically work correctly regardless of the size of `PetscInt`. 239 240 .seealso: `PetscBLASInt`, `PetscMPIInt`, `PetscReal`, `PetscScalar`, `PetscComplex`, `PetscInt`, `MPIU_REAL`, `MPIU_SCALAR`, `MPIU_COMPLEX`, `MPIU_INT`, `PetscIntCast()` 241 M*/ 242 243 #if defined(PETSC_HAVE_STDINT_H) 244 #include <stdint.h> 245 #endif 246 #if defined(PETSC_HAVE_INTTYPES_H) 247 #if !defined(__STDC_FORMAT_MACROS) 248 #define __STDC_FORMAT_MACROS /* required for using PRId64 from c++ */ 249 #endif 250 #include <inttypes.h> 251 #if !defined(PRId64) 252 #define PRId64 "ld" 253 #endif 254 #endif 255 256 #if defined(PETSC_HAVE_STDINT_H) && defined(PETSC_HAVE_INTTYPES_H) && (defined(PETSC_HAVE_MPIUNI) || defined(PETSC_HAVE_MPI_INT64_T)) /* MPI_INT64_T is not guaranteed to be a macro */ 257 typedef int64_t PetscInt64; 258 259 #define PETSC_INT64_MIN INT64_MIN 260 #define PETSC_INT64_MAX INT64_MAX 261 262 #elif (PETSC_SIZEOF_LONG_LONG == 8) 263 typedef long long PetscInt64; 264 265 #define PETSC_INT64_MIN LLONG_MIN 266 #define PETSC_INT64_MAX LLONG_MAX 267 268 #elif defined(PETSC_HAVE___INT64) 269 typedef __int64 PetscInt64; 270 271 #define PETSC_INT64_MIN INT64_MIN 272 #define PETSC_INT64_MAX INT64_MAX 273 274 #else 275 #error "cannot determine PetscInt64 type" 276 #endif 277 278 #if PETSC_SIZEOF_SIZE_T == 4 279 #define PETSC_COUNT_MIN INT_MIN 280 #define PETSC_COUNT_MAX INT_MAX 281 #else 282 #define PETSC_COUNT_MIN PETSC_INT64_MIN 283 #define PETSC_COUNT_MAX PETSC_INT64_MAX 284 #endif 285 286 typedef int32_t PetscInt32; 287 #define PETSC_INT32_MIN INT32_MIN 288 #define PETSC_INT32_MAX INT32_MAX 289 290 #if defined(PETSC_USE_64BIT_INDICES) 291 typedef PetscInt64 PetscInt; 292 293 #define PETSC_INT_MIN PETSC_INT64_MIN 294 #define PETSC_INT_MAX PETSC_INT64_MAX 295 #define PetscInt_FMT PetscInt64_FMT 296 #else 297 typedef int PetscInt; 298 299 enum { 300 PETSC_INT_MIN = INT_MIN, 301 PETSC_INT_MAX = INT_MAX 302 }; 303 #define PetscInt_FMT "d" 304 #endif 305 306 #define PETSC_UINT16_MAX 65535 307 308 /* deprecated */ 309 #define PETSC_MIN_INT PETSC_INT_MIN 310 #define PETSC_MAX_INT PETSC_INT_MAX 311 #define PETSC_MAX_UINT16 PETSC_UINT16_MAX 312 313 #if defined(PETSC_HAVE_STDINT_H) && defined(PETSC_HAVE_INTTYPES_H) && (defined(PETSC_HAVE_MPIUNI) || defined(PETSC_HAVE_MPI_INT64_T)) /* MPI_INT64_T is not guaranteed to be a macro */ 314 #define MPIU_INT64 MPI_INT64_T 315 #define PetscInt64_FMT PRId64 316 #elif (PETSC_SIZEOF_LONG_LONG == 8) 317 #define MPIU_INT64 MPI_LONG_LONG_INT 318 #define PetscInt64_FMT "lld" 319 #elif defined(PETSC_HAVE___INT64) 320 #define MPIU_INT64 MPI_INT64_T 321 #define PetscInt64_FMT "ld" 322 #else 323 #error "cannot determine PetscInt64 type" 324 #endif 325 326 #define MPIU_INT32 MPI_INT32_T 327 #define PetscInt32_FMT PRId32 328 329 /*MC 330 PetscBLASInt - datatype used to represent 'int' parameters to BLAS/LAPACK functions. 331 332 Level: intermediate 333 334 Notes: 335 Usually this is the same as `PetscInt`, but if PETSc was built with `--with-64-bit-indices` but 336 standard C/Fortran integers are 32-bit then this may not be the same as `PetscInt`, 337 except on some BLAS/LAPACK implementations that support 64-bit integers see the notes below. 338 339 `PetscErrorCode` `PetscBLASIntCast`(a,&b) checks if the given `PetscInt` a will fit in a `PetscBLASInt`, if not it 340 generates a `PETSC_ERR_ARG_OUTOFRANGE` error 341 342 Installation Notes\: 343 ./configure automatically determines the size of the integers used by BLAS/LAPACK except when `--with-batch` is used 344 in that situation one must know (by some other means) if the integers used by BLAS/LAPACK are 64-bit and if so pass the flag `--known-64-bit-blas-indices` 345 346 MATLAB ships with BLAS and LAPACK that use 64-bit integers, for example if you run ./configure with, the option 347 `--with-blaslapack-lib`=[/Applications/MATLAB_R2010b.app/bin/maci64/libmwblas.dylib,/Applications/MATLAB_R2010b.app/bin/maci64/libmwlapack.dylib] 348 349 MKL ships with both 32 and 64-bit integer versions of the BLAS and LAPACK. If you pass the flag `-with-64-bit-blas-indices` PETSc will link 350 against the 64-bit version, otherwise it uses the 32-bit version 351 352 OpenBLAS can be built to use 64-bit integers. The ./configure options `--download-openblas` `-with-64-bit-blas-indices` will build a 64-bit integer version 353 354 External packages such as hypre, ML, SuperLU etc do not provide any support for passing 64-bit integers to BLAS/LAPACK so cannot 355 be used with PETSc when PETSc links against 64-bit integer BLAS/LAPACK. ./configure will generate an error if you attempt to link PETSc against any of 356 these external libraries while using 64-bit integer BLAS/LAPACK. 357 358 .seealso: `PetscMPIInt`, `PetscInt`, `PetscBLASIntCast()` 359 M*/ 360 #if defined(PETSC_HAVE_64BIT_BLAS_INDICES) 361 typedef PetscInt64 PetscBLASInt; 362 363 #define PETSC_BLAS_INT_MIN PETSC_INT64_MIN 364 #define PETSC_BLAS_INT_MAX PETSC_INT64_MAX 365 #define PetscBLASInt_FMT PetscInt64_FMT 366 #else 367 typedef int PetscBLASInt; 368 369 enum { 370 PETSC_BLAS_INT_MIN = INT_MIN, 371 PETSC_BLAS_INT_MAX = INT_MAX 372 }; 373 374 #define PetscBLASInt_FMT "d" 375 #endif 376 377 /*MC 378 PetscCuBLASInt - datatype used to represent 'int' parameters to cuBLAS/cuSOLVER functions. 379 380 Level: intermediate 381 382 Notes: 383 As of this writing `PetscCuBLASInt` is always the system `int`. 384 385 `PetscErrorCode` `PetscCuBLASIntCast`(a,&b) checks if the given `PetscInt` a will fit in a `PetscCuBLASInt`, if not it 386 generates a `PETSC_ERR_ARG_OUTOFRANGE` error 387 388 .seealso: `PetscBLASInt`, `PetscMPIInt`, `PetscInt`, `PetscCuBLASIntCast()` 389 M*/ 390 typedef int PetscCuBLASInt; 391 392 enum { 393 PETSC_CUBLAS_INT_MIN = INT_MIN, 394 PETSC_CUBLAS_INT_MAX = INT_MAX 395 }; 396 397 /*MC 398 PetscHipBLASInt - datatype used to represent 'int' parameters to hipBLAS/hipSOLVER functions. 399 400 Level: intermediate 401 402 Notes: 403 `PetscHipBLASInt` is always the system `int`. 404 405 `PetscErrorCode` `PetscHipBLASIntCast`(a,&b) checks if the given `PetscInt` a will fit in a `PetscHipBLASInt`, if not it 406 generates a `PETSC_ERR_ARG_OUTOFRANGE` error 407 408 .seealso: `PetscBLASInt`, `PetscMPIInt`, `PetscInt`, `PetscHipBLASIntCast()` 409 M*/ 410 typedef int PetscHipBLASInt; 411 412 enum { 413 PETSC_HIPBLAS_INT_MIN = INT_MIN, 414 PETSC_HIPBLAS_INT_MAX = INT_MAX 415 }; 416 417 /*MC 418 PetscExodusIIInt - datatype used to represent 'int' parameters to ExodusII functions. 419 420 Level: intermediate 421 422 Notes: 423 This is the same as `int` 424 425 .seealso: `PetscMPIInt`, `PetscInt`, `PetscExodusIIFloat`, `PetscBLASIntCast()` 426 M*/ 427 typedef int PetscExodusIIInt; 428 #define PetscExodusIIInt_FMT "d" 429 430 /*MC 431 PetscExodusIIFloat - datatype used to represent 'float' parameters to ExodusII functions. 432 433 Level: intermediate 434 435 Notes: 436 This is the same as `float` 437 438 .seealso: `PetscMPIInt`, `PetscInt`, `PetscExodusIIInt`, `PetscBLASIntCast()` 439 M*/ 440 typedef float PetscExodusIIFloat; 441 442 /*E 443 PetscBool - Logical variable. Actually an enum in C and a logical in Fortran. 444 445 Level: beginner 446 447 Developer Note: 448 Why have `PetscBool`, why not use bool in C? The problem is that K and R C, C99 and C++ all have different mechanisms for 449 Boolean values. It is not easy to have a simple macro that will work properly in all circumstances with all three mechanisms. 450 451 .seealso: `PETSC_TRUE`, `PETSC_FALSE`, `PetscNot()`, `PetscBool3` 452 E*/ 453 typedef enum { 454 PETSC_FALSE, 455 PETSC_TRUE 456 } PetscBool; 457 PETSC_EXTERN const char *const PetscBools[]; 458 459 /*E 460 PetscBool3 - Ternary logical variable. Actually an enum in C and a 4 byte integer in Fortran. 461 462 Level: beginner 463 464 Note: 465 Should not be used with the if (flg) or if (!flg) syntax. 466 467 .seealso: `PETSC_TRUE`, `PETSC_FALSE`, `PetscNot()`, `PETSC_BOOL3_TRUE`, `PETSC_BOOL3_FALSE`, `PETSC_BOOL3_UNKNOWN` 468 E*/ 469 typedef enum { 470 PETSC_BOOL3_FALSE, 471 PETSC_BOOL3_TRUE, 472 PETSC_BOOL3_UNKNOWN = -1 /* the value is unknown at the time of query, but might be determined later */ 473 } PetscBool3; 474 475 #define PetscBool3ToBool(a) ((a) == PETSC_BOOL3_TRUE ? PETSC_TRUE : PETSC_FALSE) 476 #define PetscBoolToBool3(a) ((a) == PETSC_TRUE ? PETSC_BOOL3_TRUE : PETSC_BOOL3_FALSE) 477 478 /*MC 479 PetscReal - PETSc type that represents a real number version of `PetscScalar` 480 481 Level: beginner 482 483 Notes: 484 For MPI calls that require datatypes, use `MPIU_REAL` as the datatype for `PetscReal` and `MPIU_SUM`, `MPIU_MAX`, etc. for operations. 485 They will automatically work correctly regardless of the size of `PetscReal`. 486 487 See `PetscScalar` for details on how to ./configure the size of `PetscReal`. 488 489 .seealso: `PetscScalar`, `PetscComplex`, `PetscInt`, `MPIU_REAL`, `MPIU_SCALAR`, `MPIU_COMPLEX`, `MPIU_INT` 490 M*/ 491 492 #if defined(PETSC_USE_REAL_SINGLE) 493 typedef float PetscReal; 494 #elif defined(PETSC_USE_REAL_DOUBLE) 495 typedef double PetscReal; 496 #elif defined(PETSC_USE_REAL___FLOAT128) 497 #if defined(__cplusplus) 498 extern "C" { 499 #endif 500 #include <quadmath.h> 501 #if defined(__cplusplus) 502 } 503 #endif 504 typedef __float128 PetscReal; 505 #elif defined(PETSC_USE_REAL___FP16) 506 typedef __fp16 PetscReal; 507 #endif /* PETSC_USE_REAL_* */ 508 509 /*MC 510 PetscComplex - PETSc type that represents a complex number with precision matching that of `PetscReal`. 511 512 Synopsis: 513 #include <petscsys.h> 514 PetscComplex number = 1. + 2.*PETSC_i; 515 516 Level: beginner 517 518 Notes: 519 For MPI calls that require datatypes, use `MPIU_COMPLEX` as the datatype for `PetscComplex` and `MPIU_SUM` etc for operations. 520 They will automatically work correctly regardless of the size of `PetscComplex`. 521 522 See `PetscScalar` for details on how to ./configure the size of `PetscReal` 523 524 Complex numbers are automatically available if PETSc was able to find a working complex implementation 525 526 PETSc has a 'fix' for complex numbers to support expressions such as `std::complex<PetscReal>` + `PetscInt`, which are not supported by the standard 527 C++ library, but are convenient for petsc users. If the C++ compiler is able to compile code in `petsccxxcomplexfix.h` (This is checked by 528 configure), we include `petsccxxcomplexfix.h` to provide this convenience. 529 530 If the fix causes conflicts, or one really does not want this fix for a particular C++ file, one can define `PETSC_SKIP_CXX_COMPLEX_FIX` 531 at the beginning of the C++ file to skip the fix. 532 533 .seealso: `PetscReal`, `PetscScalar`, `PetscComplex`, `PetscInt`, `MPIU_REAL`, `MPIU_SCALAR`, `MPIU_COMPLEX`, `MPIU_INT`, `PETSC_i` 534 M*/ 535 #if !defined(PETSC_SKIP_COMPLEX) 536 #if defined(PETSC_CLANGUAGE_CXX) 537 #if !defined(PETSC_USE_REAL___FP16) && !defined(PETSC_USE_REAL___FLOAT128) 538 #if defined(__cplusplus) && defined(PETSC_HAVE_CXX_COMPLEX) /* enable complex for library code */ 539 #define PETSC_HAVE_COMPLEX 1 540 #elif !defined(__cplusplus) && defined(PETSC_HAVE_C99_COMPLEX) && defined(PETSC_HAVE_CXX_COMPLEX) /* User code only - conditional on library code complex support */ 541 #define PETSC_HAVE_COMPLEX 1 542 #endif 543 #elif defined(PETSC_USE_REAL___FLOAT128) && defined(PETSC_HAVE_C99_COMPLEX) 544 #define PETSC_HAVE_COMPLEX 1 545 #endif 546 #else /* !PETSC_CLANGUAGE_CXX */ 547 #if !defined(PETSC_USE_REAL___FP16) 548 #if !defined(__cplusplus) && defined(PETSC_HAVE_C99_COMPLEX) /* enable complex for library code */ 549 #define PETSC_HAVE_COMPLEX 1 550 #elif defined(__cplusplus) && defined(PETSC_HAVE_C99_COMPLEX) && defined(PETSC_HAVE_CXX_COMPLEX) /* User code only - conditional on library code complex support */ 551 #define PETSC_HAVE_COMPLEX 1 552 #endif 553 #endif 554 #endif /* PETSC_CLANGUAGE_CXX */ 555 #endif /* !PETSC_SKIP_COMPLEX */ 556 557 #if defined(PETSC_HAVE_COMPLEX) 558 #if defined(__cplusplus) /* C++ complex support */ 559 /* Locate a C++ complex template library */ 560 #if defined(PETSC_DESIRE_KOKKOS_COMPLEX) /* Defined in petscvec_kokkos.hpp for *.kokkos.cxx files */ 561 #define petsccomplexlib Kokkos 562 #include <Kokkos_Complex.hpp> 563 #elif (defined(__CUDACC__) && defined(PETSC_HAVE_CUDA)) || (defined(__HIPCC__) && defined(PETSC_HAVE_HIP)) 564 #define petsccomplexlib thrust 565 #include <thrust/complex.h> 566 #elif defined(PETSC_USE_REAL___FLOAT128) 567 #include <complex.h> 568 #else 569 #define petsccomplexlib std 570 #include <complex> 571 #endif 572 573 /* Define PetscComplex based on the precision */ 574 #if defined(PETSC_USE_REAL_SINGLE) 575 typedef petsccomplexlib::complex<float> PetscComplex; 576 #elif defined(PETSC_USE_REAL_DOUBLE) 577 typedef petsccomplexlib::complex<double> PetscComplex; 578 #elif defined(PETSC_USE_REAL___FLOAT128) 579 typedef __complex128 PetscComplex; 580 #endif 581 582 /* Include a PETSc C++ complex 'fix'. Check PetscComplex manual page for details */ 583 #if defined(PETSC_HAVE_CXX_COMPLEX_FIX) && !defined(PETSC_SKIP_CXX_COMPLEX_FIX) 584 #include <petsccxxcomplexfix.h> 585 #endif 586 #else /* c99 complex support */ 587 #include <complex.h> 588 #if defined(PETSC_USE_REAL_SINGLE) || defined(PETSC_USE_REAL___FP16) 589 typedef float _Complex PetscComplex; 590 #elif defined(PETSC_USE_REAL_DOUBLE) 591 typedef double _Complex PetscComplex; 592 #elif defined(PETSC_USE_REAL___FLOAT128) 593 typedef __complex128 PetscComplex; 594 #endif /* PETSC_USE_REAL_* */ 595 #endif /* !__cplusplus */ 596 #endif /* PETSC_HAVE_COMPLEX */ 597 598 /*MC 599 PetscScalar - PETSc type that represents either a double precision real number, a double precision 600 complex number, a single precision real number, a __float128 real or complex or a __fp16 real - if the code is configured 601 with `--with-scalar-type`=real,complex `--with-precision`=single,double,__float128,__fp16 602 603 Level: beginner 604 605 Note: 606 For MPI calls that require datatypes, use `MPIU_SCALAR` as the datatype for `PetscScalar` and `MPIU_SUM`, etc for operations. They will automatically work correctly regardless of the size of `PetscScalar`. 607 608 .seealso: `PetscReal`, `PetscComplex`, `PetscInt`, `MPIU_REAL`, `MPIU_SCALAR`, `MPIU_COMPLEX`, `MPIU_INT`, `PetscRealPart()`, `PetscImaginaryPart()` 609 M*/ 610 611 #if defined(PETSC_USE_COMPLEX) && defined(PETSC_HAVE_COMPLEX) 612 typedef PetscComplex PetscScalar; 613 #else /* PETSC_USE_COMPLEX */ 614 typedef PetscReal PetscScalar; 615 #endif /* PETSC_USE_COMPLEX */ 616 617 /*E 618 PetscCopyMode - Determines how an array or `PetscObject` passed to certain functions is copied or retained by the aggregate `PetscObject` 619 620 Values for array input: 621 + `PETSC_COPY_VALUES` - the array values are copied into new space, the user is free to reuse or delete the passed in array 622 . `PETSC_OWN_POINTER` - the array values are NOT copied, the object takes ownership of the array and will free it later, the user cannot change or 623 delete the array. The array MUST have been obtained with `PetscMalloc()`. Hence this mode cannot be used in Fortran. 624 - `PETSC_USE_POINTER` - the array values are NOT copied, the object uses the array but does NOT take ownership of the array. The user cannot use 625 the array but the user must delete the array after the object is destroyed. 626 627 Values for PetscObject: 628 + `PETSC_COPY_VALUES` - the input `PetscObject` is cloned into the aggregate `PetscObject`; the user is free to reuse/modify the input `PetscObject` without side effects. 629 . `PETSC_OWN_POINTER` - the input `PetscObject` is referenced by pointer (with reference count), thus should not be modified by the user. 630 increases its reference count). 631 - `PETSC_USE_POINTER` - invalid for `PetscObject` inputs. 632 633 Level: beginner 634 635 .seealso: `PetscInsertMode` 636 E*/ 637 typedef enum { 638 PETSC_COPY_VALUES, 639 PETSC_OWN_POINTER, 640 PETSC_USE_POINTER 641 } PetscCopyMode; 642 PETSC_EXTERN const char *const PetscCopyModes[]; 643 644 /*MC 645 PETSC_FALSE - False value of `PetscBool` 646 647 Level: beginner 648 649 Note: 650 Zero integer 651 652 .seealso: `PetscBool`, `PetscBool3`, `PETSC_TRUE` 653 M*/ 654 655 /*MC 656 PETSC_TRUE - True value of `PetscBool` 657 658 Level: beginner 659 660 Note: 661 Nonzero integer 662 663 .seealso: `PetscBool`, `PetscBool3`, `PETSC_FALSE` 664 M*/ 665 666 /*MC 667 PetscLogDouble - Used for logging times 668 669 Level: developer 670 671 Note: 672 Contains double precision numbers that are not used in the numerical computations, but rather in logging, timing etc. 673 674 .seealso: `PetscBool`, `PetscDataType` 675 M*/ 676 typedef double PetscLogDouble; 677 678 /*E 679 PetscDataType - Used for handling different basic data types. 680 681 Level: beginner 682 683 Notes: 684 Use of this should be avoided if one can directly use `MPI_Datatype` instead. 685 686 `PETSC_INT` is the datatype for a `PetscInt`, regardless of whether it is 4 or 8 bytes. 687 `PETSC_REAL`, `PETSC_COMPLEX` and `PETSC_SCALAR` are the datatypes for `PetscReal`, `PetscComplex` and `PetscScalar`, regardless of their sizes. 688 689 Developer Notes: 690 It would be nice if we could always just use MPI Datatypes, why can we not? 691 692 If you change any values in `PetscDatatype` make sure you update their usage in 693 share/petsc/matlab/PetscBagRead.m and share/petsc/matlab/@PetscOpenSocket/read/write.m 694 695 TODO: 696 Remove use of improper `PETSC_ENUM` 697 698 .seealso: `PetscBinaryRead()`, `PetscBinaryWrite()`, `PetscDataTypeToMPIDataType()`, 699 `PetscDataTypeGetSize()` 700 E*/ 701 typedef enum { 702 PETSC_DATATYPE_UNKNOWN = 0, 703 PETSC_DOUBLE = 1, 704 PETSC_COMPLEX = 2, 705 PETSC_LONG = 3, 706 PETSC_SHORT = 4, 707 PETSC_FLOAT = 5, 708 PETSC_CHAR = 6, 709 PETSC_BIT_LOGICAL = 7, 710 PETSC_ENUM = 8, 711 PETSC_BOOL = 9, 712 PETSC___FLOAT128 = 10, 713 PETSC_OBJECT = 11, 714 PETSC_FUNCTION = 12, 715 PETSC_STRING = 13, 716 PETSC___FP16 = 14, 717 PETSC_STRUCT = 15, 718 PETSC_INT = 16, 719 PETSC_INT64 = 17, 720 PETSC_COUNT = 18, 721 PETSC_INT32 = 19, 722 } PetscDataType; 723 PETSC_EXTERN const char *const PetscDataTypes[]; 724 725 #if defined(PETSC_USE_REAL_SINGLE) 726 #define PETSC_REAL PETSC_FLOAT 727 #elif defined(PETSC_USE_REAL_DOUBLE) 728 #define PETSC_REAL PETSC_DOUBLE 729 #elif defined(PETSC_USE_REAL___FLOAT128) 730 #define PETSC_REAL PETSC___FLOAT128 731 #elif defined(PETSC_USE_REAL___FP16) 732 #define PETSC_REAL PETSC___FP16 733 #else 734 #define PETSC_REAL PETSC_DOUBLE 735 #endif 736 737 #if defined(PETSC_USE_COMPLEX) 738 #define PETSC_SCALAR PETSC_COMPLEX 739 #else 740 #define PETSC_SCALAR PETSC_REAL 741 #endif 742 743 #define PETSC_FORTRANADDR PETSC_LONG 744 745 /*S 746 PetscToken - 'Token' used for managing tokenizing strings 747 748 Level: intermediate 749 750 .seealso: `PetscTokenCreate()`, `PetscTokenFind()`, `PetscTokenDestroy()` 751 S*/ 752 typedef struct _p_PetscToken *PetscToken; 753 754 /*S 755 PetscObject - any PETSc object, `PetscViewer`, `Mat`, `Vec`, `KSP` etc 756 757 Level: beginner 758 759 Notes: 760 This is the base class from which all PETSc objects are derived from. 761 762 In certain situations one can cast an object, for example a `Vec`, to a `PetscObject` with (`PetscObject`)vec 763 764 .seealso: `PetscObjectDestroy()`, `PetscObjectView()`, `PetscObjectGetName()`, `PetscObjectSetName()`, `PetscObjectReference()`, `PetscObjectDereference()` 765 S*/ 766 typedef struct _p_PetscObject *PetscObject; 767 768 /*MC 769 PetscObjectId - unique integer Id for a `PetscObject` 770 771 Level: developer 772 773 Note: 774 Unlike pointer values, object ids are never reused so one may save a `PetscObjectId` and compare it to one obtained later from a `PetscObject` to determine 775 if the objects are the same. Never compare two object pointer values. 776 777 .seealso: `PetscObjectState`, `PetscObjectGetId()` 778 M*/ 779 typedef PetscInt64 PetscObjectId; 780 781 /*MC 782 PetscObjectState - integer state for a `PetscObject` 783 784 Level: developer 785 786 Note: 787 Object state is always-increasing and (for objects that track state) can be used to determine if an object has 788 changed since the last time you interacted with it. It is 64-bit so that it will not overflow for a very long time. 789 790 .seealso: `PetscObjectId`, `PetscObjectStateGet()`, `PetscObjectStateIncrease()`, `PetscObjectStateSet()` 791 M*/ 792 typedef PetscInt64 PetscObjectState; 793 794 /*S 795 PetscFunctionList - Linked list of functions, possibly stored in dynamic libraries, accessed 796 by string name 797 798 Level: advanced 799 800 .seealso: `PetscFunctionListAdd()`, `PetscFunctionListDestroy()` 801 S*/ 802 typedef struct _n_PetscFunctionList *PetscFunctionList; 803 804 /*E 805 PetscFileMode - Access mode for a file. 806 807 Values: 808 + `FILE_MODE_UNDEFINED` - initial invalid value 809 . `FILE_MODE_READ` - open a file at its beginning for reading 810 . `FILE_MODE_WRITE` - open a file at its beginning for writing (will create if the file does not exist) 811 . `FILE_MODE_APPEND` - open a file at end for writing 812 . `FILE_MODE_UPDATE` - open a file for updating, meaning for reading and writing 813 - `FILE_MODE_APPEND_UPDATE` - open a file for updating, meaning for reading and writing, at the end 814 815 Level: beginner 816 817 .seealso: `PetscViewerFileSetMode()` 818 E*/ 819 typedef enum { 820 FILE_MODE_UNDEFINED = -1, 821 FILE_MODE_READ = 0, 822 FILE_MODE_WRITE, 823 FILE_MODE_APPEND, 824 FILE_MODE_UPDATE, 825 FILE_MODE_APPEND_UPDATE 826 } PetscFileMode; 827 PETSC_EXTERN const char *const PetscFileModes[]; 828 829 typedef void *PetscDLHandle; 830 typedef enum { 831 PETSC_DL_DECIDE = 0, 832 PETSC_DL_NOW = 1, 833 PETSC_DL_LOCAL = 2 834 } PetscDLMode; 835 836 /*S 837 PetscObjectList - Linked list of PETSc objects, each accessible by string name 838 839 Level: developer 840 841 Note: 842 Used by `PetscObjectCompose()` and `PetscObjectQuery()` 843 844 .seealso: `PetscObjectListAdd()`, `PetscObjectListDestroy()`, `PetscObjectListFind()`, `PetscObjectCompose()`, `PetscObjectQuery()`, `PetscFunctionList` 845 S*/ 846 typedef struct _n_PetscObjectList *PetscObjectList; 847 848 /*S 849 PetscDLLibrary - Linked list of dynamic libraries to search for functions 850 851 Level: developer 852 853 .seealso: `PetscDLLibraryOpen()` 854 S*/ 855 typedef struct _n_PetscDLLibrary *PetscDLLibrary; 856 857 /*S 858 PetscContainer - Simple PETSc object that contains a pointer to any required data 859 860 Level: advanced 861 862 Note: 863 This is useful to attach arbitrary data to a `PetscObject` with `PetscObjectCompose()` and `PetscObjectQuery()` 864 865 .seealso: `PetscObject`, `PetscContainerCreate()`, `PetscObjectCompose()`, `PetscObjectQuery()` 866 S*/ 867 typedef struct _p_PetscContainer *PetscContainer; 868 869 /*S 870 PetscRandom - Abstract PETSc object that manages generating random numbers 871 872 Level: intermediate 873 874 .seealso: `PetscRandomCreate()`, `PetscRandomGetValue()`, `PetscRandomType` 875 S*/ 876 typedef struct _p_PetscRandom *PetscRandom; 877 878 /* 879 In binary files variables are stored using the following lengths, 880 regardless of how they are stored in memory on any one particular 881 machine. Use these rather than sizeof() in computing sizes for 882 PetscBinarySeek(). 883 */ 884 #define PETSC_BINARY_INT_SIZE (32 / 8) 885 #define PETSC_BINARY_FLOAT_SIZE (32 / 8) 886 #define PETSC_BINARY_CHAR_SIZE (8 / 8) 887 #define PETSC_BINARY_SHORT_SIZE (16 / 8) 888 #define PETSC_BINARY_DOUBLE_SIZE (64 / 8) 889 #define PETSC_BINARY_SCALAR_SIZE sizeof(PetscScalar) 890 891 /*E 892 PetscBinarySeekType - argument to `PetscBinarySeek()` 893 894 Values: 895 + `PETSC_BINARY_SEEK_SET` - offset is an absolute location in the file 896 . `PETSC_BINARY_SEEK_CUR` - offset is an offset from the current location of the file pointer 897 - `PETSC_BINARY_SEEK_END` - offset is an offset from the end of the file 898 899 Level: advanced 900 901 .seealso: `PetscBinarySeek()`, `PetscBinarySynchronizedSeek()` 902 E*/ 903 typedef enum { 904 PETSC_BINARY_SEEK_SET = 0, 905 PETSC_BINARY_SEEK_CUR = 1, 906 PETSC_BINARY_SEEK_END = 2 907 } PetscBinarySeekType; 908 909 /*E 910 PetscBuildTwoSidedType - algorithm for setting up two-sided communication for use with `PetscSF` 911 912 Values: 913 + `PETSC_BUILDTWOSIDED_ALLREDUCE` - classical algorithm using an `MPI_Allreduce()` with 914 a buffer of length equal to the communicator size. Not memory-scalable due to 915 the large reduction size. Requires only an MPI-1 implementation. 916 . `PETSC_BUILDTWOSIDED_IBARRIER` - nonblocking algorithm based on `MPI_Issend()` and `MPI_Ibarrier()`. 917 Proved communication-optimal in Hoefler, Siebert, and Lumsdaine (2010). Requires an MPI-3 implementation. 918 - `PETSC_BUILDTWOSIDED_REDSCATTER` - similar to above, but use more optimized function 919 that only communicates the part of the reduction that is necessary. Requires an MPI-2 implementation. 920 921 Level: developer 922 923 .seealso: `PetscCommBuildTwoSided()`, `PetscCommBuildTwoSidedSetType()`, `PetscCommBuildTwoSidedGetType()` 924 E*/ 925 typedef enum { 926 PETSC_BUILDTWOSIDED_NOTSET = -1, 927 PETSC_BUILDTWOSIDED_ALLREDUCE = 0, 928 PETSC_BUILDTWOSIDED_IBARRIER = 1, 929 PETSC_BUILDTWOSIDED_REDSCATTER = 2 930 /* Updates here must be accompanied by updates in finclude/petscsys.h and the string array in mpits.c */ 931 } PetscBuildTwoSidedType; 932 PETSC_EXTERN const char *const PetscBuildTwoSidedTypes[]; 933 934 /* NOTE: If you change this, you must also change the values in src/vec/f90-mod/petscvec.h */ 935 /*E 936 InsertMode - How the entries are combined with the current values in the vectors or matrices 937 938 Values: 939 + `NOT_SET_VALUES` - do not actually use the values 940 . `INSERT_VALUES` - replace the current values with the provided values, unless the index is marked as constrained by the `PetscSection` 941 . `ADD_VALUES` - add the values to the current values, unless the index is marked as constrained by the `PetscSection` 942 . `MAX_VALUES` - use the maximum of each current value and provided value 943 . `MIN_VALUES` - use the minimum of each current value and provided value 944 . `INSERT_ALL_VALUES` - insert, even if indices that are not marked as constrained by the `PetscSection` 945 . `ADD_ALL_VALUES` - add, even if indices that are not marked as constrained by the `PetscSection` 946 . `INSERT_BC_VALUES` - insert, but ignore indices that are not marked as constrained by the `PetscSection` 947 - `ADD_BC_VALUES` - add, but ignore indices that are not marked as constrained by the `PetscSection` 948 949 Level: beginner 950 951 Note: 952 The `PetscSection` that determines the effects of the `InsertMode` values can be obtained by the `Vec` object with `VecGetDM()` 953 and `DMGetLocalSection()`. 954 955 Not all options are supported for all operations or PETSc object types. 956 957 .seealso: `VecSetValues()`, `MatSetValues()`, `VecSetValue()`, `VecSetValuesBlocked()`, 958 `VecSetValuesLocal()`, `VecSetValuesBlockedLocal()`, `MatSetValuesBlocked()`, 959 `MatSetValuesBlockedLocal()`, `MatSetValuesLocal()`, `VecScatterBegin()`, `VecScatterEnd()` 960 E*/ 961 typedef enum { 962 NOT_SET_VALUES, 963 INSERT_VALUES, 964 ADD_VALUES, 965 MAX_VALUES, 966 MIN_VALUES, 967 INSERT_ALL_VALUES, 968 ADD_ALL_VALUES, 969 INSERT_BC_VALUES, 970 ADD_BC_VALUES 971 } InsertMode; 972 973 /*MC 974 INSERT_VALUES - Put a value into a vector or matrix, overwrites any previous value 975 976 Level: beginner 977 978 .seealso: `InsertMode`, `VecSetValues()`, `MatSetValues()`, `VecSetValue()`, `VecSetValuesBlocked()`, 979 `VecSetValuesLocal()`, `VecSetValuesBlockedLocal()`, `MatSetValuesBlocked()`, `ADD_VALUES`, 980 `MatSetValuesBlockedLocal()`, `MatSetValuesLocal()`, `VecScatterBegin()`, `VecScatterEnd()`, `MAX_VALUES` 981 M*/ 982 983 /*MC 984 ADD_VALUES - Adds a value into a vector or matrix, if there previously was no value, just puts the 985 value into that location 986 987 Level: beginner 988 989 .seealso: `InsertMode`, `VecSetValues()`, `MatSetValues()`, `VecSetValue()`, `VecSetValuesBlocked()`, 990 `VecSetValuesLocal()`, `VecSetValuesBlockedLocal()`, `MatSetValuesBlocked()`, `INSERT_VALUES`, 991 `MatSetValuesBlockedLocal()`, `MatSetValuesLocal()`, `VecScatterBegin()`, `VecScatterEnd()`, `MAX_VALUES` 992 M*/ 993 994 /*MC 995 MAX_VALUES - Puts the maximum of the scattered/gathered value and the current value into each location 996 997 Level: beginner 998 999 .seealso: `InsertMode`, `VecScatterBegin()`, `VecScatterEnd()`, `ADD_VALUES`, `INSERT_VALUES` 1000 M*/ 1001 1002 /*MC 1003 MIN_VALUES - Puts the minimal of the scattered/gathered value and the current value into each location 1004 1005 Level: beginner 1006 1007 .seealso: `InsertMode`, `VecScatterBegin()`, `VecScatterEnd()`, `ADD_VALUES`, `INSERT_VALUES` 1008 M*/ 1009 1010 /*S 1011 PetscSubcomm - A decomposition of an MPI communicator into subcommunicators 1012 1013 Values: 1014 + `PETSC_SUBCOMM_GENERAL` - similar to `MPI_Comm_split()` each process sets the new communicator (color) they will belong to and the order within that communicator 1015 . `PETSC_SUBCOMM_CONTIGUOUS` - each new communicator contains a set of process with contiguous ranks in the original MPI communicator 1016 - `PETSC_SUBCOMM_INTERLACED` - each new communictor contains a set of processes equally far apart in rank from the others in that new communicator 1017 1018 Sample Usage: 1019 .vb 1020 PetscSubcommCreate() 1021 PetscSubcommSetNumber() 1022 PetscSubcommSetType(PETSC_SUBCOMM_INTERLACED); 1023 ccomm = PetscSubcommChild() 1024 PetscSubcommDestroy() 1025 .ve 1026 1027 Example: 1028 Consider a communicator with six processes split into 3 subcommunicators. 1029 .vb 1030 PETSC_SUBCOMM_CONTIGUOUS - the first communicator contains rank 0,1 the second rank 2,3 and the third rank 4,5 in the original ordering of the original communicator 1031 PETSC_SUBCOMM_INTERLACED - the first communicator contains rank 0,3, the second 1,4 and the third 2,5 1032 .ve 1033 1034 Level: advanced 1035 1036 Note: 1037 After a call to `PetscSubcommSetType()`, `PetscSubcommSetTypeGeneral()`, or `PetscSubcommSetFromOptions()` one may call 1038 .vb 1039 PetscSubcommChild() returns the associated subcommunicator on this process 1040 PetscSubcommContiguousParent() returns a parent communitor but with all child of the same subcommunicator having contiguous rank 1041 .ve 1042 1043 Developer Note: 1044 This is used in objects such as `PCREDUNDANT` to manage the subcommunicators on which the redundant computations 1045 are performed. 1046 1047 .seealso: `PetscSubcommCreate()`, `PetscSubcommSetNumber()`, `PetscSubcommSetType()`, `PetscSubcommView()`, `PetscSubcommSetFromOptions()` 1048 S*/ 1049 typedef struct _n_PetscSubcomm *PetscSubcomm; 1050 typedef enum { 1051 PETSC_SUBCOMM_GENERAL = 0, 1052 PETSC_SUBCOMM_CONTIGUOUS = 1, 1053 PETSC_SUBCOMM_INTERLACED = 2 1054 } PetscSubcommType; 1055 PETSC_EXTERN const char *const PetscSubcommTypes[]; 1056 1057 /*S 1058 PetscHeap - A simple class for managing heaps 1059 1060 Level: intermediate 1061 1062 .seealso: `PetscHeapCreate()`, `PetscHeapAdd()`, `PetscHeapPop()`, `PetscHeapPeek()`, `PetscHeapStash()`, `PetscHeapUnstash()`, `PetscHeapView()`, `PetscHeapDestroy()` 1063 S*/ 1064 typedef struct _PetscHeap *PetscHeap; 1065 1066 typedef struct _n_PetscShmComm *PetscShmComm; 1067 typedef struct _n_PetscOmpCtrl *PetscOmpCtrl; 1068 1069 /*S 1070 PetscSegBuffer - a segmented extendable buffer 1071 1072 Level: developer 1073 1074 .seealso: `PetscSegBufferCreate()`, `PetscSegBufferGet()`, `PetscSegBufferExtract()`, `PetscSegBufferDestroy()` 1075 S*/ 1076 typedef struct _n_PetscSegBuffer *PetscSegBuffer; 1077 1078 typedef struct _n_PetscOptionsHelpPrinted *PetscOptionsHelpPrinted; 1079 1080 /*S 1081 PetscBT - PETSc bitarrays, efficient storage of arrays of boolean values 1082 1083 Level: advanced 1084 1085 Notes: 1086 The following routines do not have their own manual pages 1087 1088 .vb 1089 PetscBTCreate(m,&bt) - creates a bit array with enough room to hold m values 1090 PetscBTDestroy(&bt) - destroys the bit array 1091 PetscBTMemzero(m,bt) - zeros the entire bit array (sets all values to false) 1092 PetscBTSet(bt,index) - sets a particular entry as true 1093 PetscBTClear(bt,index) - sets a particular entry as false 1094 PetscBTLookup(bt,index) - returns the value 1095 PetscBTLookupSet(bt,index) - returns the value and then sets it true 1096 PetscBTLookupClear(bt,index) - returns the value and then sets it false 1097 PetscBTLength(m) - returns number of bytes in array with m bits 1098 PetscBTView(m,bt,viewer) - prints all the entries in a bit array 1099 .ve 1100 1101 PETSc does not check error flags on `PetscBTLookup()`, `PetcBTLookupSet()`, `PetscBTLength()` because error checking 1102 would cost hundreds more cycles then the operation. 1103 1104 S*/ 1105 typedef char *PetscBT; 1106 1107 /* The number of bits in a byte */ 1108 #define PETSC_BITS_PER_BYTE CHAR_BIT 1109