1# 2# This is the makefile for compiling PETSc. See 3# http://www.mcs.anl.gov/petsc/documentation/installation.html for directions on installing PETSc. 4# See also conf for additional commands. 5# 6ALL: all 7LOCDIR = ./ 8DIRS = src include tutorials interfaces share/petsc/matlab 9CFLAGS = 10FFLAGS = 11CPPFLAGS = 12FPPFLAGS = 13 14# next line defines PETSC_DIR and PETSC_ARCH if they are not set 15include ././${PETSC_ARCH}/lib/petsc/conf/petscvariables 16include ${PETSC_DIR}/lib/petsc/conf/variables 17include ${PETSC_DIR}/lib/petsc/conf/rules 18include ${PETSC_DIR}/lib/petsc/conf/test.common 19 20# This makefile contains a lot of PHONY targets with improperly specified prerequisites 21# where correct execution instead depends on the targets being processed in the correct 22# order. This is gross, but this makefile doesn't really do any work. Sub-makes still 23# benefit from parallelism. 24.NOTPARALLEL: 25 26OMAKE_SELF = $(OMAKE) -f makefile 27OMAKE_SELF_PRINTDIR = $(OMAKE_PRINTDIR) -f makefile 28 29# 30# Basic targets to build PETSc libraries. 31# 32all: 33 +@${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} chk_petscdir chk_upgrade | tee ${PETSC_ARCH}/lib/petsc/conf/make.log 34 @ln -sf ${PETSC_ARCH}/lib/petsc/conf/make.log make.log 35 +@${OMAKE_SELF_PRINTDIR} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} all-local 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log; 36 @egrep -i "( error | error: |no such file or directory)" ${PETSC_ARCH}/lib/petsc/conf/make.log | tee ${PETSC_ARCH}/lib/petsc/conf/error.log > /dev/null 37 +@if test -s ${PETSC_ARCH}/lib/petsc/conf/error.log; then \ 38 printf ${PETSC_TEXT_HILIGHT}"**************************ERROR*************************************\n" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log; \ 39 echo " Error during compile, check ${PETSC_ARCH}/lib/petsc/conf/make.log" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log; \ 40 echo " Send it and ${PETSC_ARCH}/lib/petsc/conf/configure.log to petsc-maint@mcs.anl.gov" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log;\ 41 printf "********************************************************************"${PETSC_TEXT_NORMAL}"\n" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log;\ 42 else \ 43 ${OMAKE_SELF} print_mesg_after_build PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log ;\ 44 fi #solaris make likes to print the whole command that gave error. So split this up into the smallest chunk below 45 @echo "Finishing make run at `date +'%a, %d %b %Y %H:%M:%S %z'`" >> ${PETSC_ARCH}/lib/petsc/conf/make.log 46 @if test -s ${PETSC_ARCH}/lib/petsc/conf/error.log; then exit 1; fi 47 48all-local: info libs matlabbin mpi4py-build petsc4py-build libmesh-build mfem-build slepc-build hpddm-build amrex-build 49 50# 51# Prints information about the system and version of PETSc being compiled 52# 53info: 54 -@echo "==========================================" 55 -@echo " " 56 -@echo "See documentation/faq.html and documentation/bugreporting.html" 57 -@echo "for help with installation problems. Please send EVERYTHING" 58 -@echo "printed out below when reporting problems. Please check the" 59 -@echo "mailing list archives and consider subscribing." 60 -@echo " " 61 -@echo " http://www.mcs.anl.gov/petsc/miscellaneous/mailing-lists.html" 62 -@echo " " 63 -@echo "==========================================" 64 -@echo Starting make run on `hostname` at `date +'%a, %d %b %Y %H:%M:%S %z'` 65 -@echo Machine characteristics: `uname -a` 66 -@echo "-----------------------------------------" 67 -@echo "Using PETSc directory: ${PETSC_DIR}" 68 -@echo "Using PETSc arch: ${PETSC_ARCH}" 69 -@echo "-----------------------------------------" 70 -@grep "define PETSC_VERSION" ${PETSC_DIR}/include/petscversion.h | ${SED} "s/........//" 71 -@echo "-----------------------------------------" 72 -@echo "Using configure Options: ${CONFIGURE_OPTIONS}" 73 -@echo "Using configuration flags:" 74 -@grep "\#define " ${PETSCCONF_H} 75 -@echo "-----------------------------------------" 76 -@echo "Using C compile: ${PETSC_CCOMPILE}" 77 -@if [ "${MPICC_SHOW}" != "" ]; then \ 78 printf "mpicc -show: %b\n" "${MPICC_SHOW}";\ 79 fi; \ 80 printf "C compiler version: %b\n" "${C_VERSION}"; \ 81 if [ "${PETSC_CXXCOMPILE}" != "" ]; then \ 82 echo "Using C++ compile: ${PETSC_CXXCOMPILE}";\ 83 if [ "${MPICXX_SHOW}" != "" ]; then \ 84 printf "mpicxx -show: %b\n" "${MPICXX_SHOW}"; \ 85 fi;\ 86 printf "C++ compiler version: %b\n" "${Cxx_VERSION}"; \ 87 fi 88 -@if [ "${FC}" != "" ]; then \ 89 echo "Using Fortran compile: ${PETSC_FCOMPILE}";\ 90 if [ "${MPIFC_SHOW}" != "" ]; then \ 91 printf "mpif90 -show: %b\n" "${MPIFC_SHOW}"; \ 92 fi; \ 93 printf "Fortran compiler version: %b\n" "${FC_VERSION}"; \ 94 fi 95 -@if [ "${CUDAC}" != "" ]; then \ 96 echo "Using CUDA compile: ${PETSC_CUCOMPILE}";\ 97 fi 98 -@if [ "${CLANGUAGE}" = "CXX" ]; then \ 99 echo "Using C++ compiler to compile PETSc";\ 100 fi 101 -@echo "-----------------------------------------" 102 -@echo "Using C/C++ linker: ${PCC_LINKER}" 103 -@echo "Using C/C++ flags: ${PCC_LINKER_FLAGS}" 104 -@if [ "${FC}" != "" ]; then \ 105 echo "Using Fortran linker: ${FC_LINKER}";\ 106 echo "Using Fortran flags: ${FC_LINKER_FLAGS}";\ 107 fi 108 -@echo "-----------------------------------------" 109 -@echo "Using system modules: ${LOADEDMODULES}" 110 -@if [ "${MPI_IS_MPIUNI}" = "1" ]; then \ 111 echo Using mpi.h: mpiuni; \ 112 else \ 113 TESTDIR=`mktemp -q -d -t petscmpi-XXXXXXXX` && \ 114 echo '#include <mpi.h>' > $${TESTDIR}/mpitest.c && \ 115 BUF=`${CPP} ${PETSC_CPPFLAGS} ${PETSC_CC_INCLUDES} $${TESTDIR}/mpitest.c |grep 'mpi\.h' | ( head -1 ; cat > /dev/null )` && \ 116 echo Using mpi.h: $${BUF}; ${RM} -rf $${TESTDIR}; \ 117 fi 118 -@echo "-----------------------------------------" 119 -@echo "Using libraries: ${PETSC_LIB}" 120 -@echo "------------------------------------------" 121 -@echo "Using mpiexec: ${MPIEXEC}" 122 -@echo "------------------------------------------" 123 -@echo "Using MAKE: $(MAKE)" 124 -@echo "Using MAKEFLAGS: -j$(MAKE_NP) -l$(MAKE_LOAD) $(MAKEFLAGS)" 125 -@echo "==========================================" 126 127# 128# Build MatLab binaries 129# 130matlabbin: 131 -@if [ "${MATLAB_MEX}" != "" -a "${MATLAB_SOCKET}" != "" -a "${PETSC_SCALAR}" = "real" -a "${PETSC_PRECISION}" = "double" ]; then \ 132 echo "BEGINNING TO COMPILE MATLAB INTERFACE"; \ 133 if [ ! -d "${PETSC_DIR}/${PETSC_ARCH}/lib/petsc" ] ; then ${MKDIR} ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc; fi; \ 134 if [ ! -d "${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/matlab" ] ; then ${MKDIR} ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/matlab; fi; \ 135 cd src/sys/classes/viewer/impls/socket/matlab && ${OMAKE_SELF} matlabcodes PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR}; \ 136 echo "========================================="; \ 137 fi 138# 139# Builds PETSc check examples for a given architecture 140# 141check_install: check 142check: 143 -+@${OMAKE_SELF} PATH="${PETSC_DIR}/${PETSC_ARCH}/lib:${PATH}" PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} check_build 2>&1 | tee ./${PETSC_ARCH}/lib/petsc/conf/check.log 144checkx: 145 -@${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} checkx_build 2>&1 | tee ./${PETSC_ARCH}/lib/petsc/conf/checkx.log 146check_build: 147 -@echo "Running check examples to verify correct installation" 148 -@echo "Using PETSC_DIR=${PETSC_DIR} and PETSC_ARCH=${PETSC_ARCH}" 149 +@cd src/snes/tutorials >/dev/null; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean-legacy 150 +@cd src/snes/tutorials >/dev/null; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testex19 151 +@if [ "${HYPRE_LIB}" != "" ] && [ "${PETSC_WITH_BATCH}" = "" ] && [ "${PETSC_SCALAR}" = "real" ]; then \ 152 cd src/snes/tutorials >/dev/null; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex19_hypre; \ 153 fi; 154 +@if [ "${KOKKOS_LIB}" != "" ] && [ "${PETSC_WITH_BATCH}" = "" ] && [ "${PETSC_SCALAR}" = "real" ] && [ "${PETSC_PRECISION}" = "double" ]; then \ 155 cd src/snes/tutorials >/dev/null; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex3_kokkos; \ 156 fi; 157 +@if [ "${MUMPS_LIB}" != "" ] && [ "${PETSC_WITH_BATCH}" = "" ]; then \ 158 cd src/snes/tutorials >/dev/null; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex19_fieldsplit_mumps; \ 159 fi; 160 +@if [ "${SUPERLU_DIST_LIB}" != "" ] && [ "${PETSC_WITH_BATCH}" = "" ]; then \ 161 cd src/snes/tutorials >/dev/null; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex19_superlu_dist; \ 162 fi; 163 +@if [ "${HDF5_LIB}" != "" ] && [ "${PETSC_WITH_BATCH}" = "" ]; then \ 164 cd src/vec/vec/tests >/dev/null; \ 165 ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean-legacy; \ 166 ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ex47.PETSc DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex47; \ 167 ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean-legacy; \ 168 fi; 169 +@if [ "${AMREX_LIB}" != "" ] && [ "${PETSC_WITH_BATCH}" = "" ]; then \ 170 echo "Running testamres examples to verify correct installation";\ 171 echo "Using PETSC_DIR=${PETSC_DIR} and PETSC_ARCH=${PETSC_ARCH}";\ 172 cd src/ksp/ksp/tutorials/amrex >/dev/null; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean-legacy;\ 173 ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testamrex;\ 174 fi; 175 +@if ( [ "${ML_LIB}" != "" ] || [ "${TRILINOS_LIB}" != "" ] ) && [ "${PETSC_WITH_BATCH}" = "" ]; then \ 176 cd src/snes/tutorials >/dev/null; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex19_ml; \ 177 fi; 178 +@if [ "${SUITESPARSE_LIB}" != "" ] && [ "${PETSC_WITH_BATCH}" = "" ]; then \ 179 cd src/snes/tutorials >/dev/null; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex19_suitesparse; \ 180 fi; 181 +@cd src/snes/tutorials >/dev/null; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ex19.rm 182 +@if [ "${PETSC4PY}" = "yes" ]; then \ 183 cd src/ksp/ksp/tutorials >/dev/null; \ 184 ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean-legacy; \ 185 ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testex100; \ 186 ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean-legacy; \ 187 fi; 188 +@egrep "^#define PETSC_HAVE_FORTRAN 1" ${PETSCCONF_H} | tee .ftn.log > /dev/null; \ 189 if test -s .ftn.log; then \ 190 cd src/snes/tutorials >/dev/null; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testex5f; \ 191 fi; ${RM} .ftn.log; 192 +@egrep "^#define PETSC_HAVE_MATLAB_ENGINE 1" ${PETSCCONF_H} | tee .ftn.log > /dev/null; \ 193 if test -s .ftn.log; then \ 194 cd src/vec/vec/tutorials >/dev/null; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testex31; \ 195 fi; ${RM} .ftn.log; 196 +@cd src/snes/tutorials >/dev/null; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean-legacy 197 -@echo "Completed test examples" 198checkx_build: 199 -@echo "Running graphics check example to verify correct X11 installation" 200 -@echo "Using PETSC_DIR=${PETSC_DIR} and PETSC_ARCH=${PETSC_ARCH}" 201 @cd src/snes/tutorials; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean-legacy 202 @cd src/snes/tutorials; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testxex19 203 @cd src/snes/tutorials; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean-legacy 204 -@echo "Completed graphics check example" 205check_usermakefile: 206 -@echo "Testing compile with user makefile" 207 -@echo "Using PETSC_DIR=${PETSC_DIR} and PETSC_ARCH=${PETSC_ARCH}" 208 @cd src/snes/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} -f ${PETSC_DIR}/share/petsc/Makefile.user ex19 209 @egrep "^#define PETSC_HAVE_FORTRAN 1" ${PETSCCONF_H} | tee .ftn.log > /dev/null; \ 210 if test -s .ftn.log; then \ 211 cd src/snes/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} -f ${PETSC_DIR}/share/petsc/Makefile.user ex5f; \ 212 fi; ${RM} .ftn.log; 213 @cd src/snes/tutorials; ${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean-legacy 214 -@echo "Completed compile with user makefile" 215 216# Compare ABI/API of two versions of PETSc library with the old one defined by PETSC_{DIR,ARCH}_ABI_OLD 217abitest: 218 @if [ "${PETSC_DIR_ABI_OLD}" = "" ] || [ "${PETSC_ARCH_ABI_OLD}" = "" ]; \ 219 then printf "You must set environment variables PETSC_DIR_ABI_OLD and PETSC_ARCH_ABI_OLD to run abitest\n"; \ 220 exit 1; \ 221 fi; 222 -@echo "Comparing ABI/API of the following two PETSc versions (you must have already configured and built them using GCC and with -g):" 223 -@echo "=========================================================================================" 224 -@echo " Old: PETSC_DIR_ABI_OLD = ${PETSC_DIR_ABI_OLD}" 225 -@echo " PETSC_ARCH_ABI_OLD = ${PETSC_ARCH_ABI_OLD}" 226 -@pushd ${PETSC_DIR_ABI_OLD} >> /dev/null ; echo " Branch = "`git rev-parse --abbrev-ref HEAD` 227 -@echo " New: PETSC_DIR = ${PETSC_DIR}" 228 -@echo " PETSC_ARCH = ${PETSC_ARCH}" 229 -@echo " Branch = "`git rev-parse --abbrev-ref HEAD` 230 -@echo "=========================================================================================" 231 -@$(PYTHON) ${PETSC_DIR}/lib/petsc/bin/maint/abicheck.py -old_dir ${PETSC_DIR_ABI_OLD} -old_arch ${PETSC_ARCH_ABI_OLD} -new_dir ${PETSC_DIR} -new_arch ${PETSC_ARCH} -report_format html 232 233# Compare ABI/API of current PETSC_ARCH/PETSC_DIR with a previous branch 234abitestcomplete: 235 -@if [[ -f "${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/conf/configure.log" ]]; then \ 236 OPTIONS=`grep -h -m 1 "Configure Options: " ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/conf/configure.log | sed "s!Configure Options: --configModules=PETSc.Configure --optionsModule=config.compilerOptions!!g"` ;\ 237echo $${OPTIONS} ;\ 238 fi ; \ 239 if [[ "${PETSC_DIR_ABI_OLD}" != "" ]]; then \ 240 PETSC_DIR_OLD=${PETSC_DIR_ABI_OLD}; \ 241 else \ 242 PETSC_DIR_OLD=${PETSC_DIR}/../petsc-abi; \ 243 fi ; \ 244 echo "=================================================================================================" ;\ 245 echo "Doing ABI/API comparison between" ${branch} " and " `git rev-parse --abbrev-ref HEAD` "using " $${OPTIONS} ;\ 246 echo "=================================================================================================" ;\ 247 if [[ ! -d $${PETSC_DIR_OLD} ]]; then \ 248 git clone ${PETSC_DIR} $${PETSC_DIR_OLD} ; \ 249 else \ 250 cd $${PETSC_DIR_OLD} ; \ 251 git pull ; \ 252 fi ; \ 253 cd $${PETSC_DIR_OLD} ; \ 254 git checkout ${branch} ; \ 255 PETSC_DIR=`pwd` PETSC_ARCH=arch-branch-`git rev-parse ${branch}` ./configure $${OPTIONS} ; \ 256 PETSC_DIR=`pwd` PETSC_ARCH=arch-branch-`git rev-parse ${branch}` make all test ; \ 257 cd ${PETSC_DIR} ; \ 258 ./configure $${OPTIONS}; \ 259 make all test ; \ 260 PETSC_DIR_ABI_OLD=$${PETSC_DIR_OLD} PETSC_ARCH_ABI_OLD=arch-branch-`git rev-parse ${branch}` make abitest 261 262# Deletes PETSc libraries 263deletelibs: 264 -${RM} -rf ${PETSC_LIB_DIR}/libpetsc*.* 265deletemods: 266 -${RM} -f ${PETSC_DIR}/${PETSC_ARCH}/include/petsc*.mod 267 268allclean: 269 -@${OMAKE} -f gmakefile clean 270 271clean:: allclean 272 273distclean: chk_petscdir 274 @if [ -f ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/conf/reconfigure-${PETSC_ARCH}.py ]; then \ 275 echo "*** Preserving ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/conf/reconfigure-${PETSC_ARCH}.py in ${PETSC_DIR} ***"; \ 276 mv -f ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/conf/reconfigure-${PETSC_ARCH}.py ${PETSC_DIR}/; fi 277 @echo "*** Deleting all build files in ${PETSC_DIR}/${PETSC_ARCH} ***" 278 -${RM} -rf ${PETSC_DIR}/${PETSC_ARCH}/ 279 280 281# 282reconfigure: 283 @unset MAKEFLAGS && ${PYTHON} ${PETSC_ARCH}/lib/petsc/conf/reconfigure-${PETSC_ARCH}.py 284# 285install: 286 @${PYTHON} ./config/install.py -destDir=${DESTDIR} 287 +${OMAKE_SELF} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} mpi4py-install petsc4py-install libmesh-install mfem-install slepc-install hpddm-install amrex-install 288 289mpistreams: 290 +@cd src/benchmarks/streams; ${OMAKE_SELF} PATH="${PETSC_DIR}/${PETSC_ARCH}/lib:${PATH}" PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} mpistreams 291 292mpistream: 293 +@cd src/benchmarks/streams; ${OMAKE_SELF} PATH="${PETSC_DIR}/${PETSC_ARCH}/lib:${PATH}" PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} mpistream 294 295openmpstreams: 296 +@cd src/benchmarks/streams; ${OMAKE_SELF} PATH="${PETSC_DIR}/${PETSC_ARCH}/lib:${PATH}" PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} openmpstreams 297 298openmpstream: 299 +@cd src/benchmarks/streams; ${OMAKE_SELF} PATH="${PETSC_DIR}/${PETSC_ARCH}/lib:${PATH}" PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} openmpstream 300 301# for legacy reasons 302stream: mpistream 303 304streams: mpistreams 305 306# ------------------------------------------------------------------ 307# 308# All remaining actions are intended for PETSc developers only. 309# PETSc users should not generally need to use these commands. 310# 311# See the users manual for how the tags files may be used from Emacs and Vi/Vim 312# 313alletags: 314 -@${PYTHON} lib/petsc/bin/maint/generateetags.py 315 -@find config -type f -name "*.py" |grep -v SCCS | xargs etags -o TAGS_PYTHON 316 317# obtain gtags from https://www.gnu.org/software/global/ 318allgtags: 319 -@find ${PETSC_DIR}/include ${PETSC_DIR}/src -regex '\(.*makefile\|.*\.\(cc\|hh\|cpp\|cxx\|C\|hpp\|c\|h\|cu\|m\)$$\)' | grep -v ftn-auto | gtags -f - 320 321allfortranstubs: 322 -@${RM} -rf ${PETSC_ARCH}/include/petsc/finclude/ftn-auto/*-tmpdir 323 @${PYTHON} lib/petsc/bin/maint/generatefortranstubs.py ${BFORT} ${VERBOSE} 324 -@${PYTHON} lib/petsc/bin/maint/generatefortranstubs.py -merge ${VERBOSE} 325 -@${RM} -rf ${PETSC_ARCH}/include/petsc/finclude/ftn-auto/*-tmpdir 326deletefortranstubs: 327 -@find . -type d -name ftn-auto | xargs rm -rf 328 329# Builds all the documentation - should be done every night 330alldoc: allcite allpdf alldoc1 alldoc2 docsetdate 331 332# Build just citations 333allcite: chk_loc deletemanualpages 334 -${PYTHON} lib/petsc/bin/maint/countpetsccits.py 335 -${OMAKE_SELF} ACTION=manualpages_buildcite tree_basic LOC=${LOC} 336 -@sed -e s%man+../%man+manualpages/% ${LOC}/docs/manualpages/manualpages.cit > ${LOC}/docs/manualpages/htmlmap 337 -@cat ${PETSC_DIR}/src/docs/mpi.www.index >> ${LOC}/docs/manualpages/htmlmap 338 339# Build just PDF manuals + prerequisites 340allpdf: chk_loc allcite 341 -cd src/docs/tex/manual; ${OMAKE_SELF} manual.pdf LOC=${LOC} 342 -cd src/docs/tao_tex/manual; ${OMAKE_SELF} manual.pdf LOC=${LOC} 343 344# Build just manual pages + prerequisites 345allmanpages: chk_loc allcite 346 -${OMAKE_SELF} ACTION=manualpages tree_basic LOC=${LOC} 347 348# Build just manual examples + prerequisites 349allmanexamples: chk_loc allmanpages 350 -${OMAKE_SELF} ACTION=manexamples tree_basic LOC=${LOC} 351 352# Build everything that goes into 'doc' dir except html sources 353alldoc1: chk_loc chk_concepts_dir allcite allmanpages allmanexamples 354 -${OMAKE_SELF} manimplementations LOC=${LOC} 355 -${PYTHON} lib/petsc/bin/maint/wwwindex.py ${PETSC_DIR} ${LOC} 356 -${OMAKE_SELF} ACTION=getexlist tree_basic LOC=${LOC} 357 -${OMAKE_SELF} ACTION=exampleconcepts tree_basic LOC=${LOC} 358 -${PYTHON} lib/petsc/bin/maint/helpindex.py ${PETSC_DIR} ${LOC} 359 360# Builds .html versions of the source 361# html overwrites some stuff created by update-docs - hence this is done later. 362alldoc2: chk_loc allcite 363 -${OMAKE_SELF} ACTION=html PETSC_DIR=${PETSC_DIR} alltree LOC=${LOC} 364 -${PYTHON} lib/petsc/bin/maint/update-docs.py ${PETSC_DIR} ${LOC} 365# 366# Makes links for all manual pages in $LOC/docs/manualpages/all 367allman: 368 @cd ${LOC}/docs/manualpages; rm -rf all ; mkdir all ; find * -type d -wholename all -prune -o -name index.html -prune -o -type f -name \*.html -exec ln -s -f ../{} all \; 369 370DOCSETDATE_PRUNE_LIST=-o -type f -wholename share/petsc/saws/linearsolveroptions.html -prune -o -type f -wholename tutorials/HandsOnExercise.html -prune -o -type f -wholename tutorials/TAOHandsOnExercise.html -prune 371 372# modify all generated html files and add in version number, date, canonical URL info. 373docsetdate: chk_petscdir 374 @echo "Updating generated html files with petsc version, date, canonical URL info";\ 375 version_release=`grep '^#define PETSC_VERSION_RELEASE ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 376 version_major=`grep '^#define PETSC_VERSION_MAJOR ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 377 version_minor=`grep '^#define PETSC_VERSION_MINOR ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 378 version_subminor=`grep '^#define PETSC_VERSION_SUBMINOR ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 379 if [ $${version_release} = 0 ]; then \ 380 petscversion=petsc-master; \ 381 export petscversion; \ 382 elif [ $${version_release} = 1 ]; then \ 383 petscversion=petsc-$${version_major}.$${version_minor}.$${version_subminor}; \ 384 export petscversion; \ 385 else \ 386 echo "Unknown PETSC_VERSION_RELEASE: $${version_release}"; \ 387 exit; \ 388 fi; \ 389 datestr=`git log -1 --pretty=format:%ci | cut -d ' ' -f 1`; \ 390 export datestr; \ 391 gitver=`git describe --match "v*"`; \ 392 export gitver; \ 393 find * -type d -wholename src/docs/website \ 394 -prune -o -type d -wholename src/benchmarks/results \ 395 -prune -o -type d -wholename config/BuildSystem/docs/website \ 396 -prune -o -type d -wholename include/web \ 397 -prune -o -type d -wholename 'arch-*' \ 398 -prune -o -type d -wholename lib/petsc/bin/maint \ 399 -prune -o -type d -wholename externalpackages \ 400 -prune ${DOCSETDATE_PRUNE_LIST} -o -type f -name \*.html \ 401 -exec perl -pi -e 's^(<body.*>)^$$1\n <div id=\"version\" align=right><b>$$ENV{petscversion} $$ENV{datestr}</b></div>\n <div id="bugreport" align=right><a href="mailto:petsc-maint\@mcs.anl.gov?subject=Typo or Error in Documentation &body=Please describe the typo or error in the documentation: $$ENV{petscversion} $$ENV{gitver} {} "><small>Report Typos and Errors</small></a></div>^i' {} \; \ 402 -exec perl -pi -e 's^(<head>)^$$1 <link rel="canonical" href="http://www.mcs.anl.gov/petsc/petsc-current/{}" />^i' {} \; ; \ 403 echo "Done fixing version number, date, canonical URL info" 404 405# Build the Sphinx HTML documentation. This uses Python's venv, which should 406# behave similarly to what happens on e.g. ReadTheDocs. You may prefer to use 407# your own Python environment and directly build the Sphinx docs by using 408# the makefile in ${PETSC_SPHINX_ROOT}, paying attention to the requirements.txt 409# there. 410PETSC_SPHINX_ROOT=src/docs/sphinx_docs 411PETSC_SPHINX_ENV=sphinx_docs_env 412 413sphinx-docs-html: 414 @${PYTHON} -c 'import sys; sys.exit(sys.version_info[:2] < (3,3))' || \ 415 (printf 'Working Python 3.3 or later is required to build the Sphinx docs in a virtual environment\nTry e.g.\n make sphinx-docs-html PYTHON=python3\n' && false) 416 @if [ ! -d "${PETSC_SPHINX_ENV}" ]; then \ 417 ${PYTHON} -m venv ${PETSC_SPHINX_ENV}; \ 418 . ${PETSC_SPHINX_ENV}/bin/activate; \ 419 pip install -r src/docs/sphinx_docs/requirements.txt; \ 420 fi 421 @. ${PETSC_SPHINX_ENV}/bin/activate && ${OMAKE} -C ${PETSC_SPHINX_ROOT} html 422 423sphinx-docs-clean: 424 ${OMAKE} -C ${PETSC_SPHINX_ROOT} clean 425 ${RM} -rf ${PETSC_SPHINX_ENV} 426 427alldocclean: deletemanualpages allcleanhtml 428 429# Deletes man pages (HTML version) 430deletemanualpages: chk_loc 431 -@if [ -d ${LOC} -a -d ${LOC}/docs/manualpages ]; then \ 432 find ${LOC}/docs/manualpages -type f -name "*.html" -exec ${RM} {} \; ;\ 433 ${RM} ${LOC}/docs/exampleconcepts ;\ 434 ${RM} ${LOC}/docs/manualpages/manualpages.cit ;\ 435 ${PYTHON} lib/petsc/bin/maint/update-docs.py ${PETSC_DIR} ${LOC} clean;\ 436 fi 437 438allcleanhtml: 439 -${OMAKE_SELF} ACTION=cleanhtml PETSC_DIR=${PETSC_DIR} alltree 440 441chk_concepts_dir: chk_loc 442 @if [ ! -d "${LOC}/docs/manualpages/concepts" ]; then \ 443 echo Making directory ${LOC}/docs/manualpages/concepts for library; ${MKDIR} ${LOC}/docs/manualpages/concepts; fi 444 445# Builds simple html versions of the source without links into the $PETSC_ARCH/obj directory, used by make mergecov 446srchtml: 447 -${OMAKE_SELF} ACTION=simplehtml PETSC_DIR=${PETSC_DIR} alltree_src 448 449########################################################### 450# targets to build distribution and update docs 451########################################################### 452 453# Creates ${HOME}/petsc.tar.gz [and petsc-lite.tar.gz] 454dist: 455 ${PETSC_DIR}/lib/petsc/bin/maint/builddist ${PETSC_DIR} master 456 457# This target works only if you can do 'ssh petsc@login.mcs.anl.gov' 458# also copy the file over to ftp site. 459web-snapshot: 460 @if [ ! -f "${HOME}/petsc-master.tar.gz" ]; then \ 461 echo "~/petsc-master.tar.gz missing! cannot update petsc-master snapshot on mcs-web-site"; \ 462 else \ 463 echo "updating petsc-master snapshot on mcs-web-site"; \ 464 tmpdir=`mktemp -d -t petsc-doc.XXXXXXXX`; \ 465 cd $${tmpdir}; tar -xzf ${HOME}/petsc-master.tar.gz; \ 466 /usr/bin/rsync -e ssh -az --delete $${tmpdir}/petsc-master/ \ 467 petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc/petsc-master ;\ 468 /bin/cp -f /home/petsc/petsc-master.tar.gz /mcs/ftp/pub/petsc/petsc-master.tar.gz;\ 469 ${RM} -rf $${tmpdir} ;\ 470 fi 471 472# build the tarfile - and then update petsc-master snapshot on mcs-web-site 473update-web-snapshot: dist web-snapshot 474 475# This target updates website main pages 476update-web: 477 @cd ${PETSC_DIR}/src/docs; make PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} bib2html; \ 478 /usr/bin/rsync -az -C --exclude=documentation/index.html \ 479 --exclude=documentation/installation.html --exclude=download/index.html \ 480 ${PETSC_DIR}/src/docs/website/ petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc 481 @cd ${PETSC_DIR}/src/docs/tex; /usr/bin/rsync -az petscapp.bib petsc.bib petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc/publications 482 483########################################################### 484# 485# See script for details 486# 487gcov: 488 @$(PYTHON) ${PETSC_DIR}/lib/petsc/bin/maint/gcov.py --run_gcov --petsc_arch ${PETSC_ARCH} 489 490mergegcov: 491 @$(PYTHON) ${PETSC_DIR}/lib/petsc/bin/maint/gcov.py --merge_gcov --petsc_arch ${PETSC_ARCH} 492 493 494######################## 495# 496# Create the include dependency graph (requires graphviz to be available) 497# 498includegraph: 499 -@${PETSC_DIR}/src/contrib/style/include-graph.sh includegraph.pdf 500 -@echo Include dependency graph written to includegraph.pdf 501 502# 503# ------------------------------------------------------------------------------- 504# 505# Some macros to check if the fortran interface is up-to-date. 506# 507countfortranfunctions: 508 -@cd ${PETSC_DIR}/src/fortran; egrep '^void' custom/*.c auto/*.c | \ 509 cut -d'(' -f1 | tr -s ' ' | cut -d' ' -f2 | uniq | egrep -v "(^$$|Petsc)" | \ 510 sed "s/_$$//" | sort > /tmp/countfortranfunctions 511 512countcfunctions: 513 -@grep PETSC_EXTERN ${PETSC_DIR}/include/*.h | grep "(" | tr -s ' ' | \ 514 cut -d'(' -f1 | cut -d' ' -f3 | grep -v "\*" | tr -s '\012' | \ 515 tr 'A-Z' 'a-z' | sort | uniq > /tmp/countcfunctions 516 517difffortranfunctions: countfortranfunctions countcfunctions 518 -@echo -------------- Functions missing in the fortran interface --------------------- 519 -@${DIFF} /tmp/countcfunctions /tmp/countfortranfunctions | grep "^<" | cut -d' ' -f2 520 -@echo ----------------- Functions missing in the C interface ------------------------ 521 -@${DIFF} /tmp/countcfunctions /tmp/countfortranfunctions | grep "^>" | cut -d' ' -f2 522 -@${RM} /tmp/countcfunctions /tmp/countfortranfunctions 523 524checkbadfortranstubs: 525 -@echo "=========================================" 526 -@echo "Functions with MPI_Comm as an Argument" 527 -@echo "=========================================" 528 -@cd ${PETSC_DIR}/src/fortran/auto; grep '^void' *.c | grep 'MPI_Comm' | \ 529 tr -s ' ' | tr -s ':' ' ' |cut -d'(' -f1 | cut -d' ' -f1,3 530 -@echo "=========================================" 531 -@echo "Functions with a String as an Argument" 532 -@echo "=========================================" 533 -@cd ${PETSC_DIR}/src/fortran/auto; grep '^void' *.c | grep 'char \*' | \ 534 tr -s ' ' | tr -s ':' ' ' |cut -d'(' -f1 | cut -d' ' -f1,3 535 -@echo "=========================================" 536 -@echo "Functions with Pointers to PETSc Objects as Argument" 537 -@echo "=========================================" 538 -@cd ${PETSC_DIR}/src/fortran/auto; \ 539 _p_OBJ=`grep _p_ ${PETSC_DIR}/include/*.h | tr -s ' ' | \ 540 cut -d' ' -f 3 | tr -s '\012' | grep -v '{' | cut -d'*' -f1 | \ 541 sed "s/_p_//g" | tr -s '\012 ' ' *|' ` ; \ 542 for OBJ in $$_p_OBJ; do \ 543 grep "$$OBJ \*" *.c | tr -s ' ' | tr -s ':' ' ' | \ 544 cut -d'(' -f1 | cut -d' ' -f1,3; \ 545 done 546 547checkpackagetests: 548 -@echo "Missing package tests" 549 -@cat config/examples/*.py > configexamples; pushd config/BuildSystem/config/packages/; packages=`ls *.py | sed "s/\\.py//g"`;popd; for i in $${packages}; do j=`echo $${i} | tr '[:upper:]' '[:lower:]'`; printf $${j} ; egrep "(with-$${j}|download-$${j})" configexamples | grep -v "=0" | wc -l ; done 550 -@echo "Missing download package tests" 551 -@cat config/examples/*.py > configexamples; pushd config/BuildSystem/config/packages/; packages=`grep -l "download " *.py | sed "s/\\.py//g"`;popd; for i in $${packages}; do j=`echo $${i} | tr '[:upper:]' '[:lower:]'`; printf $${j} ; egrep "(download-$${j})" configexamples | grep -v "=0" | wc -l ; done 552 553.PHONY: info info_h all deletelibs allclean update \ 554 alletags etags etags_complete etags_noexamples etags_makefiles etags_examples etags_fexamples alldoc allmanualpages \ 555 allhtml allcleanhtml countfortranfunctions \ 556 start_configure configure_petsc configure_clean matlabbin install 557