1# 2# This is the makefile for compiling PETSc. See 3# http://www.mcs.anl.gov/petsc/documentation/installation.html for directions on installing PETSc. 4# See also conf for additional commands. 5# 6ALL: all 7LOCDIR = ./ 8DIRS = src include tutorials interfaces 9CFLAGS = 10FFLAGS = 11CPPFLAGS = 12FPPFLAGS = 13 14# next line defines PETSC_DIR and PETSC_ARCH if they are not set 15include ././${PETSC_ARCH}/conf/petscvariables 16include ${PETSC_DIR}/conf/variables 17include ${PETSC_DIR}/conf/rules 18include ${PETSC_DIR}/conf/test 19 20# 21# Basic targets to build PETSc libraries. 22# all: builds the c, fortran, and f90 libraries 23all: chk_makej 24 @${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} chk_petscdir chk_upgrade | tee ${PETSC_ARCH}/conf/make.log 25 @ln -sf ${PETSC_ARCH}/conf/make.log make.log 26 @if [ "${MAKE_IS_GNUMAKE}" != "" ]; then \ 27 ${OMAKE_PRINTDIR} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} all-gnumake-local 2>&1 | tee -a ${PETSC_ARCH}/conf/make.log; \ 28 elif [ "${PETSC_BUILD_USING_CMAKE}" != "" ]; then \ 29 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} all-cmake-local 2>&1 | tee -a ${PETSC_ARCH}/conf/make.log \ 30 | egrep -v '( --check-build-system |cmake -E | -o CMakeFiles/petsc[[:lower:]]*.dir/| -o lib/libpetsc|CMakeFiles/petsc[[:lower:]]*\.dir/(build|depend|requires)|-f CMakeFiles/Makefile2|Dependee .* is newer than depender |provides\.build. is up to date)'; \ 31 else \ 32 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} all-legacy-local 2>&1 | tee -a ${PETSC_ARCH}/conf/make.log \ 33 | ${GREP} -v "has no symbols"; \ 34 fi 35 @egrep -i "( error | error: |no such file or directory)" ${PETSC_ARCH}/conf/make.log | tee ${PETSC_ARCH}/conf/error.log > /dev/null 36 @if test -s ${PETSC_ARCH}/conf/error.log; then \ 37 printf ${PETSC_TEXT_HILIGHT}"**************************ERROR*************************************\n" 2>&1 | tee -a ${PETSC_ARCH}/conf/make.log; \ 38 echo " Error during compile, check ${PETSC_ARCH}/conf/make.log" 2>&1 | tee -a ${PETSC_ARCH}/conf/make.log; \ 39 echo " Send it and ${PETSC_ARCH}/conf/configure.log to petsc-maint@mcs.anl.gov" 2>&1 | tee -a ${PETSC_ARCH}/conf/make.log;\ 40 printf "********************************************************************"${PETSC_TEXT_NORMAL}"\n" 2>&1 | tee -a ${PETSC_ARCH}/conf/make.log;\ 41 else \ 42 ${OMAKE} shared_install PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} 2>&1 | tee -a ${PETSC_ARCH}/conf/make.log ;\ 43 fi #solaris make likes to print the whole command that gave error. So split this up into the smallest chunk below 44 @if test -s ${PETSC_ARCH}/conf/error.log; then exit 1; fi 45 46all-gnumake: 47 @if [ "${MAKE_IS_GNUMAKE}" != "" ]; then \ 48 ${OMAKE_PRINTDIR} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} PETSC_BUILD_USING_CMAKE="" all;\ 49 else printf ${PETSC_TEXT_HILIGHT}"Build not configured for GNUMAKE. Quiting"${PETSC_TEXT_NORMAL}"\n"; exit 1; fi 50 51all-cmake: 52 @if [ "${PETSC_BUILD_USING_CMAKE}" != "" ]; then \ 53 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} MAKE_IS_GNUMAKE="" all;\ 54 else printf ${PETSC_TEXT_HILIGHT}"Build not configured for CMAKE. Quiting"${PETSC_TEXT_NORMAL}"\n"; exit 1; fi 55 56all-legacy: 57 @${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} PETSC_BUILD_USING_CMAKE="" MAKE_IS_GNUMAKE="" all 58 59all-gnumake-local: chk_makej info gnumake 60 61all-cmake-local: chk_makej info cmakegen cmake 62 63all-legacy-local: chk_makej chklib_dir info deletelibs deletemods build shared_nomesg mpi4py petsc4py 64# 65# Prints information about the system and version of PETSc being compiled 66# 67info: chk_makej 68 -@echo "==========================================" 69 -@echo " " 70 -@echo "See documentation/faq.html and documentation/bugreporting.html" 71 -@echo "for help with installation problems. Please send EVERYTHING" 72 -@echo "printed out below when reporting problems. Please check the" 73 -@echo "mailing list archives and consider subscribing." 74 -@echo " " 75 -@echo " http://www.mcs.anl.gov/petsc/miscellaneous/mailing-lists.html" 76 -@echo " " 77 -@echo "==========================================" 78 -@echo On `date` on `hostname` 79 -@echo Machine characteristics: `uname -a` 80 -@echo "-----------------------------------------" 81 -@echo "Using PETSc directory: ${PETSC_DIR}" 82 -@echo "Using PETSc arch: ${PETSC_ARCH}" 83 -@echo "-----------------------------------------" 84 -@grep "define PETSC_VERSION" ${PETSC_DIR}/include/petscversion.h | ${SED} "s/........//" 85 -@echo "-----------------------------------------" 86 -@echo "Using configure Options: ${CONFIGURE_OPTIONS}" 87 -@echo "Using configuration flags:" 88 -@grep "\#define " ${PETSC_DIR}/${PETSC_ARCH}/include/petscconf.h 89 -@echo "-----------------------------------------" 90 -@echo "Using C/C++ compile: ${PETSC_COMPILE}" 91 -@if [ "${PETSC_LANGUAGE}" = "CONLY" -a "${MPICC_SHOW}" != "" ]; then \ 92 printf "mpicc -show: %b\n" "${MPICC_SHOW}"; \ 93 elif [ "${PETSC_LANGUAGE}" = "CXXONLY" -a "${MPICXX_SHOW}" != "" ]; then \ 94 printf "mpicxx -show: %b\n" "${MPICXX_SHOW}"; \ 95 fi; 96 -@if [ "${FC}" != "" ]; then \ 97 echo "Using Fortran compile: ${PETSC_FCOMPILE}";\ 98 if [ "${MPIFC_SHOW}" != "" ]; then \ 99 printf "mpif90 -show: %b\n" "${MPIFC_SHOW}"; \ 100 fi; \ 101 fi 102 -@if [ "${CUDAC}" != "" ]; then \ 103 echo "Using CUDA compile: ${PETSC_CUCOMPILE}";\ 104 fi 105 -@echo "-----------------------------------------" 106 -@echo "Using C/C++ linker: ${PCC_LINKER}" 107 -@echo "Using C/C++ flags: ${PCC_LINKER_FLAGS}" 108 -@if [ "${FC}" != "" ]; then \ 109 echo "Using Fortran linker: ${FC_LINKER}";\ 110 echo "Using Fortran flags: ${FC_LINKER_FLAGS}";\ 111 fi 112 -@echo "-----------------------------------------" 113 -@echo "Using libraries: ${PETSC_LIB}" 114 -@echo "------------------------------------------" 115 -@echo "Using mpiexec: ${MPIEXEC}" 116 -@echo "==========================================" 117 118# 119# Builds the PETSc libraries 120# This target also builds fortran77 and f90 interface 121# files and compiles .F files 122# 123build: chk_makej 124 -@echo "BEGINNING TO COMPILE LIBRARIES IN ALL DIRECTORIES" 125 -@echo "=========================================" 126 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=libfast tree 127 -@${RANLIB} ${PETSC_LIB_DIR}/*.${AR_LIB_SUFFIX} > tmpf 2>&1 ; ${GREP} -v "has no symbols" tmpf; ${RM} tmpf; 128 -@echo "Completed building libraries" 129 -@echo "=========================================" 130# 131# 132# Builds PETSc test examples for a given architecture 133# 134check: test 135test: 136 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} test_build 2>&1 | tee ./${PETSC_ARCH}/conf/test.log 137testx: 138 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testx_build 2>&1 | tee ./${PETSC_ARCH}/conf/testx.log 139test_build: 140 -@echo "Running test examples to verify correct installation" 141 -@echo "Using PETSC_DIR=${PETSC_DIR} and PETSC_ARCH=${PETSC_ARCH}" 142 @cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 143 @cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testex19 144 @if [ "${FC}" != "" ]; then \ 145 egrep "^#define PETSC_USE_FORTRAN_DATATYPES 1" ${PETSC_DIR}/${PETSC_ARCH}/include/petscconf.h | tee .ftn-dtype.log > /dev/null; \ 146 if test -s .ftn-dtype.log; then F90TEST="testex5f90t"; else F90TEST="testex5f"; fi; ${RM} .ftn-dtype.log; \ 147 cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} $${F90TEST}; \ 148 fi; 149 @cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 150 -@echo "Completed test examples" 151testx_build: 152 -@echo "Running graphics test example to verify correct X11 installation" 153 -@echo "Using PETSC_DIR=${PETSC_DIR} and PETSC_ARCH=${PETSC_ARCH}" 154 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 155 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testxex19 156 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 157 -@echo "Completed graphics test example" 158 159testexamples: info 160 -@echo "BEGINNING TO COMPILE AND RUN TEST EXAMPLES" 161 -@echo "Due to different numerical round-off on certain" 162 -@echo "machines some of the numbers may not match exactly." 163 -@echo "=========================================" 164 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=testexamples_C tree 165 -@echo "Completed compiling and running test examples" 166 -@echo "=========================================" 167testfortran: info 168 -@echo "BEGINNING TO COMPILE AND RUN FORTRAN TEST EXAMPLES" 169 -@echo "=========================================" 170 -@echo "Due to different numerical round-off on certain" 171 -@echo "machines or the way Fortran formats numbers" 172 -@echo "some of the results may not match exactly." 173 -@echo "=========================================" 174 -@if [ "${FC}" != "" ]; then \ 175 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=testexamples_Fortran tree; \ 176 echo "Completed compiling and running Fortran test examples"; \ 177 else \ 178 echo "Error: No FORTRAN compiler available"; \ 179 fi 180 -@echo "=========================================" 181testexamples_uni: info 182 -@echo "BEGINNING TO COMPILE AND RUN TEST UNI-PROCESSOR EXAMPLES" 183 -@echo "Due to different numerical round-off on certain" 184 -@echo "machines some of the numbers may not match exactly." 185 -@echo "=========================================" 186 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=testexamples_C_X_MPIUni tree 187 -@echo "Completed compiling and running uniprocessor test examples" 188 -@echo "=========================================" 189testfortran_uni: info 190 -@echo "BEGINNING TO COMPILE AND RUN TEST UNI-PROCESSOR FORTRAN EXAMPLES" 191 -@echo "Due to different numerical round-off on certain" 192 -@echo "machines some of the numbers may not match exactly." 193 -@echo "=========================================" 194 -@if [ "${FC}" != "" ]; then \ 195 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=testexamples_Fortran_MPIUni tree; \ 196 echo "Completed compiling and running uniprocessor fortran test examples"; \ 197 else \ 198 echo "Error: No FORTRAN compiler available"; \ 199 fi 200 -@ 201 -@echo "=========================================" 202 203# Ranlib on the libraries 204ranlib: 205 ${RANLIB} ${PETSC_LIB_DIR}/*.${AR_LIB_SUFFIX} 206 207# Deletes PETSc libraries 208deletelibs: chk_makej 209 -${RM} -rf ${PETSC_LIB_DIR}/libpetsc*.* 210deletemods: chk_makej 211 -${RM} -f ${PETSC_DIR}/${PETSC_ARCH}/include/petsc*.mod 212 213# Cleans up build 214allclean-legacy: deletelibs deletemods 215 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=clean tree 216allclean-cmake: 217 -@cd ${PETSC_ARCH} && ${OMAKE} clean 218allclean-gnumake: 219 -@${OMAKE} -f gmakefile clean 220 221allclean: 222 @if [ "${MAKE_IS_GNUMAKE}" != "" ]; then \ 223 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} allclean-gnumake; \ 224 elif [ "${PETSC_BUILD_USING_CMAKE}" != "" ]; then \ 225 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} allclean-cmake; \ 226 else \ 227 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} allclean-legacy; \ 228 fi 229# 230reconfigure: 231 @${PYTHON} ${PETSC_ARCH}/conf/reconfigure-${PETSC_ARCH}.py 232# 233install: 234 @${PYTHON} ./config/install.py -destDir=${DESTDIR} 235 236newall: 237 -@cd src/sys; @${PYTHON} ${PETSC_DIR}/config/builder.py 238 -@cd src/vec; @${PYTHON} ${PETSC_DIR}/config/builder.py 239 -@cd src/mat; @${PYTHON} ${PETSC_DIR}/config/builder.py 240 -@cd src/dm; @${PYTHON} ${PETSC_DIR}/config/builder.py 241 -@cd src/ksp; @${PYTHON} ${PETSC_DIR}/config/builder.py 242 -@cd src/snes; @${PYTHON} ${PETSC_DIR}/config/builder.py 243 -@cd src/ts; @${PYTHON} ${PETSC_DIR}/config/builder.py 244 245streams: 246 cd src/benchmarks/streams; ${OMAKE} test 247# ------------------------------------------------------------------ 248# 249# All remaining actions are intended for PETSc developers only. 250# PETSc users should not generally need to use these commands. 251# 252# See the users manual for how the tags files may be used from Emacs and Vi/Vim 253# 254alletags: 255 -@${PYTHON} bin/maint/generateetags.py 256 -@find config -type f -name "*.py" |grep -v SCCS | xargs etags -o TAGS_PYTHON 257 258# obtain gtags from http://www.gnu.org/s/global/ 259allgtags: 260 -@find -E ${PETSC_DIR}/{include,src,bin} -regex '(.*makefile|.*\.(cc|hh|cpp|C|hpp|c|h|cu|m)$$)' | grep -v ftn-auto | gtags -f - 261 262allfortranstubs: 263 -@${RM} -rf include/finclude/ftn-auto/*-tmpdir 264 -@${PYTHON} bin/maint/generatefortranstubs.py ${BFORT} ${VERBOSE} 265 -@${PYTHON} bin/maint/generatefortranstubs.py -merge ${VERBOSE} 266 -@${RM} -rf include/finclude/ftn-auto/*-tmpdir 267deletefortranstubs: 268 -@find . -type d -name ftn-auto | xargs rm -rf 269cmakegen: 270 -@${PYTHON} config/cmakegen.py 271# 272# These are here for the target allci and allco, and etags 273# 274 275BMAKEFILES = conf/variables conf/rules conf/test 276SCRIPTS = bin/maint/builddist bin/maint/wwwman bin/maint/xclude bin/maint/bugReport.py bin/maint/buildconfigtest bin/maint/builddistlite \ 277 bin/maint/buildtest bin/maint/checkBuilds.py bin/maint/copylognightly bin/maint/copylognightly.tao bin/maint/countfiles bin/maint/findbadfiles \ 278 bin/maint/fixinclude bin/maint/getexlist bin/maint/getpdflabels.py bin/maint/helpindex.py bin/maint/hosts.local bin/maint/hosts.solaris \ 279 bin/maint/lex.py bin/maint/mapnameslatex.py bin/maint/startnightly bin/maint/startnightly.tao bin/maint/submitPatch.py \ 280 bin/maint/update-docs.py bin/maint/wwwindex.py bin/maint/xcludebackup bin/maint/xcludecblas bin/maint/zap bin/maint/zapall \ 281 config/PETSc/Configure.py config/PETSc/Options.py \ 282 config/PETSc/packages/*.py config/PETSc/utilities/*.py 283 284 285# Builds all the documentation - should be done every night 286alldoc: alldoc1 alldoc2 alldoc3 docsetdate 287 288# Build everything that goes into 'doc' dir except html sources 289alldoc1: chk_loc deletemanualpages chk_concepts_dir 290 -${PYTHON} bin/maint/countpetsccits.py 291 -${OMAKE} ACTION=manualpages_buildcite tree_basic LOC=${LOC} 292 -@sed -e s%man+../%man+manualpages/% ${LOC}/docs/manualpages/manualpages.cit > ${LOC}/docs/manualpages/htmlmap 293 -@cat ${PETSC_DIR}/src/docs/mpi.www.index >> ${LOC}/docs/manualpages/htmlmap 294 -cd src/docs/tex/manual; ${OMAKE} manual.pdf LOC=${LOC} 295 -cd src/docs/tex/manual; ${OMAKE} developers.pdf LOC=${LOC} 296 -${OMAKE} ACTION=manualpages tree_basic LOC=${LOC} 297 -${PYTHON} bin/maint/wwwindex.py ${PETSC_DIR} ${LOC} 298 -${OMAKE} ACTION=manexamples tree_basic LOC=${LOC} 299 -${OMAKE} manconcepts LOC=${LOC} 300 -${OMAKE} ACTION=getexlist tree_basic LOC=${LOC} 301 -${OMAKE} ACTION=exampleconcepts tree_basic LOC=${LOC} 302 -${PYTHON} bin/maint/helpindex.py ${PETSC_DIR} ${LOC} 303 304# Builds .html versions of the source 305# html overwrites some stuff created by update-docs - hence this is done later. 306alldoc2: chk_loc 307 -${OMAKE} ACTION=html PETSC_DIR=${PETSC_DIR} alltree LOC=${LOC} 308 -${PYTHON} bin/maint/update-docs.py ${PETSC_DIR} ${LOC} 309# 310# Builds HTML versions of Matlab scripts 311alldoc3: chk_loc 312 if [ "${MATLAB_COMMAND}" != "" ]; then\ 313 export MATLABPATH=${MATLABPATH}:${PETSC_DIR}/bin/matlab; \ 314 cd ${PETSC_DIR}/bin/matlab; ${MATLAB_COMMAND} -nodisplay -nodesktop -r "generatehtml;exit" ; \ 315 cd classes; ${MATLAB_COMMAND} -nodisplay -nodesktop -r "generatehtml;exit" ; \ 316 cd examples/tutorials; ${MATLAB_COMMAND} -nodisplay -nodesktop -r "generatehtml;exit" ; \ 317 fi 318 319# modify all generated html files and add in version number, date, canonical URL info. 320docsetdate: chk_petscdir 321 @echo "Updating generated html files with petsc version, date, canonical URL info";\ 322 version_release=`grep '^#define PETSC_VERSION_RELEASE ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 323 version_major=`grep '^#define PETSC_VERSION_MAJOR ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 324 version_minor=`grep '^#define PETSC_VERSION_MINOR ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 325 version_subminor=`grep '^#define PETSC_VERSION_SUBMINOR ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 326 if [ $${version_release} = 0 ]; then \ 327 petscversion=petsc-dev; \ 328 export petscversion; \ 329 elif [ $${version_release} = 1 ]; then \ 330 petscversion=petsc-$${version_major}.$${version_minor}.$${version_subminor}; \ 331 export petscversion; \ 332 else \ 333 echo "Unknown PETSC_VERSION_RELEASE: $${version_release}"; \ 334 exit; \ 335 fi; \ 336 datestr=`git log -1 --pretty=format:%ci | cut -d ' ' -f 1`; \ 337 export datestr; \ 338 find * -type d -wholename src/docs/website -prune -o -type d -wholename src/benchmarks/results -prune -o \ 339 -type d -wholename config/BuildSystem/docs/website -prune -o -type d -wholename include/web -prune -o \ 340 -type d -wholename 'arch-*' -prune -o -type d -wholename src/tops -prune -o -type d -wholename externalpackages -prune -o \ 341 -type f -wholename tutorials/multiphysics/tutorial.html -prune -o -type f -name \*.html \ 342 -exec perl -pi -e 's^(<body.*>)^$$1\n <div id=\"version\" align=right><b>$$ENV{petscversion} $$ENV{datestr}</b></div>^i' {} \; \ 343 -exec perl -pi -e 's^(<head>)^$$1 <link rel="canonical" href="http://www.mcs.anl.gov/petsc/petsc-current/{}" />^i' {} \; ; \ 344 echo "Done fixing version number, date, canonical URL info" 345 346alldocclean: deletemanualpages allcleanhtml 347 348# Deletes man pages (HTML version) 349deletemanualpages: chk_loc 350 -@if [ -d ${LOC} -a -d ${LOC}/docs/manualpages ]; then \ 351 find ${LOC}/docs/manualpages -type f -name "*.html" -exec ${RM} {} \; ;\ 352 ${RM} ${LOC}/docs/exampleconcepts ;\ 353 ${RM} ${LOC}/docs/manconcepts ;\ 354 ${RM} ${LOC}/docs/manualpages/manualpages.cit ;\ 355 ${PYTHON} bin/maint/update-docs.py ${PETSC_DIR} ${LOC} clean;\ 356 fi 357 358allcleanhtml: 359 -${OMAKE} ACTION=cleanhtml PETSC_DIR=${PETSC_DIR} alltree 360 361chk_concepts_dir: chk_loc 362 @if [ ! -d "${LOC}/docs/manualpages/concepts" ]; then \ 363 echo Making directory ${LOC}/docs/manualpages/concepts for library; ${MKDIR} ${LOC}/docs/manualpages/concepts; fi 364 365########################################################### 366# targets to build distribution and update docs 367########################################################### 368 369# Creates ${HOME}/petsc.tar.gz [and petsc-lite.tar.gz] 370dist: 371 ${PETSC_DIR}/bin/maint/builddist ${PETSC_DIR} master 372 373# This target works only if you can do 'ssh petsc@login.mcs.anl.gov' 374# also copy the file over to ftp site. 375web-snapshot: 376 @if [ ! -f "${HOME}/petsc-dev.tar.gz" ]; then \ 377 echo "~/petsc-dev.tar.gz missing! cannot update petsc-dev snapshot on mcs-web-site"; \ 378 else \ 379 echo "updating petsc-dev snapshot on mcs-web-site"; \ 380 tmpdir=`mktemp -d -t petsc-doc.XXXXXXXX`; \ 381 cd $${tmpdir}; tar -xzf ${HOME}/petsc-dev.tar.gz; \ 382 /usr/bin/rsync -e ssh -az --delete $${tmpdir}/petsc-dev/ \ 383 petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc/petsc-dev ;\ 384 /bin/cp -f /home/petsc/petsc-dev.tar.gz /mcs/ftp/pub/petsc/petsc-dev.tar.gz;\ 385 ${RM} -rf $${tmpdir} ;\ 386 fi 387 388# build the tarfile - and then update petsc-dev snapshot on mcs-web-site 389update-web-snapshot: dist web-snapshot 390 391# This target updates website main pages 392update-web: 393 @cd ${PETSC_DIR}/src/docs; make PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} bib2html; \ 394 /usr/bin/rsync -az -C --exclude=documentation/index.html \ 395 --exclude=documentation/installation.html --exclude=download/index.html \ 396 ${PETSC_DIR}/src/docs/website/ petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc 397 @cd ${PETSC_DIR}/docs; /usr/bin/rsync -az developers.pdf petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc/developers/ 398 @cd ${PETSC_DIR}/src/docs/tex; /usr/bin/rsync -az petscapp.bib petsc.bib petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc/publications 399 400# 401# builds a single list of files for each PETSc library so they may all be built in parallel 402# without a recursive set of make calls 403createfastbuild: 404 cd src/vec; ${RM} -f files; /bin/echo -n "SOURCEC = " > files; make tree ACTION=sourcelist BASE_DIR=${PETSC_DIR}/src/vec 405 406########################################################### 407# 408# See script for details 409# 410gcov: 411 -@${PETSC_DIR}/bin/maint/gcov.py -run_gcov 412 413mergegcov: 414 -@${PETSC_DIR}/bin/maint/gcov.py -merge_gcov ${LOC} *.tar.gz 415 416# usage make allrcslabel NEW_RCS_LABEL=v_2_0_28 417allrcslabel: 418 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} NEW_RCS_LABEL=${NEW_RCS_LABEL} ACTION=rcslabel alltree 419# 420# ------------------------------------------------------------------------------- 421# 422# Some macros to check if the fortran interface is up-to-date. 423# 424countfortranfunctions: 425 -@cd ${PETSC_DIR}/src/fortran; egrep '^void' custom/*.c auto/*.c | \ 426 cut -d'(' -f1 | tr -s ' ' | cut -d' ' -f2 | uniq | egrep -v "(^$$|Petsc)" | \ 427 sed "s/_$$//" | sort > /tmp/countfortranfunctions 428 429countcfunctions: 430 -@grep extern ${PETSC_DIR}/include/*.h | grep "(" | tr -s ' ' | \ 431 cut -d'(' -f1 | cut -d' ' -f3 | grep -v "\*" | tr -s '\012' | \ 432 tr 'A-Z' 'a-z' | sort > /tmp/countcfunctions 433 434difffortranfunctions: countfortranfunctions countcfunctions 435 -@echo -------------- Functions missing in the fortran interface --------------------- 436 -@${DIFF} /tmp/countcfunctions /tmp/countfortranfunctions | grep "^<" | cut -d' ' -f2 437 -@echo ----------------- Functions missing in the C interface ------------------------ 438 -@${DIFF} /tmp/countcfunctions /tmp/countfortranfunctions | grep "^>" | cut -d' ' -f2 439 -@${RM} /tmp/countcfunctions /tmp/countfortranfunctions 440 441checkbadfortranstubs: 442 -@echo "=========================================" 443 -@echo "Functions with MPI_Comm as an Argument" 444 -@echo "=========================================" 445 -@cd ${PETSC_DIR}/src/fortran/auto; grep '^void' *.c | grep 'MPI_Comm' | \ 446 tr -s ' ' | tr -s ':' ' ' |cut -d'(' -f1 | cut -d' ' -f1,3 447 -@echo "=========================================" 448 -@echo "Functions with a String as an Argument" 449 -@echo "=========================================" 450 -@cd ${PETSC_DIR}/src/fortran/auto; grep '^void' *.c | grep 'char \*' | \ 451 tr -s ' ' | tr -s ':' ' ' |cut -d'(' -f1 | cut -d' ' -f1,3 452 -@echo "=========================================" 453 -@echo "Functions with Pointers to PETSc Objects as Argument" 454 -@echo "=========================================" 455 -@cd ${PETSC_DIR}/src/fortran/auto; \ 456 _p_OBJ=`grep _p_ ${PETSC_DIR}/include/*.h | tr -s ' ' | \ 457 cut -d' ' -f 3 | tr -s '\012' | grep -v '{' | cut -d'*' -f1 | \ 458 sed "s/_p_//g" | tr -s '\012 ' ' *|' ` ; \ 459 for OBJ in $$_p_OBJ; do \ 460 grep "$$OBJ \*" *.c | tr -s ' ' | tr -s ':' ' ' | \ 461 cut -d'(' -f1 | cut -d' ' -f1,3; \ 462 done 463# 464# Automatically generates PETSc exercises in html from the tutorial examples. 465# 466# The introduction for each section is obtained from docs/manualpages/header_${MANSEC} is under RCS and may be edited 467# (used also in introductions to the manual pages) 468# The overall introduction is in docs/exercises/introduction.html and is under RCS and may be edited 469# The list of exercises is from TUTORIALS in each directory's makefile 470# 471# DO NOT EDIT the pageform.txt or *.htm files generated since they will be automatically replaced. 472# The pagemaker rule is in the file conf (at the bottom) 473# 474# Eventually the line below will replace the two cd in the rule below, it is just this way now for speed 475# -@${OMAKE} PETSC_DIR=${PETSC_DIR} pagemaker 476# 477exercises: 478 -@echo "=========================================" 479 -@echo "Generating HTML tutorial exercises" 480 -@${RM} docs/pageform.txt 481 -@echo "title=\"PETSc Exercises\"" > docs/pageform.txt 482 -@echo "access_title=Exercise Sections" >> docs/pageform.txt 483 -@echo "access_format=short" >> docs/pageform.txt 484 -@echo "startpage=../exercises/introduction.htm" >> docs/pageform.txt 485 -@echo "NONE title=\"Introduction\" command=link src=../exercises/introduction.htm" >> docs/pageform.txt 486 -@echo "Generating HTML for individual directories" 487 -@echo "=========================================" 488 -@${OMAKE} PETSC_DIR=${PETSC_DIR} ACTION=pagemaker tree 489 -@echo "Completed HTML for individual directories" 490 -@echo "NONE title=\"<HR>\" " >> docs/pageform.txt; 491 -@echo "NONE title=\"PETSc Documentation\" command=link src=../index.html target=replace" >> docs/pageform.txt 492 /home/MPI/class/mpiexmpl/maint/makepage.new -pageform=docs/pageform.txt -access_extra=/dev/null -outdir=docs/exercises 493 -@echo "=========================================" 494 495.PHONY: info info_h all build testexamples testfortran testexamples_uni testfortran_uni ranlib deletelibs allclean update \ 496 alletags etags etags_complete etags_noexamples etags_makefiles etags_examples etags_fexamples alldoc allmanualpages \ 497 allhtml allcleanhtml allci allco allrcslabel countfortranfunctions \ 498 start_configure configure_petsc configure_clean 499 500petscao : petscmat petscao.f90.h 501petscdm : petscksp petscdm.f90.h 502petscdraw : petsc petscdraw.f90.h 503petscis : petsc petscis.f90.h 504petscksp : petscpc petscksp.f90.h 505petsclog : petsc petsclog.f90.h 506petscmat : petscvec petscmat.f90.h 507petscmg : petscksp petscmg.f90.h 508petscpc : petscmat petscpc.f90.h 509petscsnes : petscksp petscsnes.f90.h 510petscsys : petsc petscsys.f90.h 511petscts : petscsnes petscts.f90.h 512petsc : petsc.f90.h 513petscvec : petscis petscvec.f90.h 514petscviewer : petsc petscviewer.f90.h 515petscmesh : petsc petscmesh.f90.h 516modules : petscao petscdm petscdraw petscis petscksp petsclog petscmat petscmg petscpc petscsnes petscsys petscts petsc petscvec petscviewer petscmesh 517