1# 2# This is the makefile for compiling PETSc. See 3# http://www.mcs.anl.gov/petsc/documentation/installation.html for directions on installing PETSc. 4# See also conf for additional commands. 5# 6ALL: all 7LOCDIR = ./ 8DIRS = src include tutorials interfaces share/petsc/matlab 9CFLAGS = 10FFLAGS = 11CPPFLAGS = 12FPPFLAGS = 13 14# next line defines PETSC_DIR and PETSC_ARCH if they are not set 15include ././${PETSC_ARCH}/lib/petsc/conf/petscvariables 16include ${PETSC_DIR}/lib/petsc/conf/variables 17include ${PETSC_DIR}/lib/petsc/conf/rules 18include ${PETSC_DIR}/lib/petsc/conf/test.common 19 20# This makefile contains a lot of PHONY targets with improperly specified prerequisites 21# where correct execution instead depends on the targets being processed in the correct 22# order. This is gross, but this makefile doesn't really do any work. Sub-makes still 23# benefit from parallelism. 24.NOTPARALLEL: 25 26# 27# Basic targets to build PETSc libraries. 28# 29all: 30 +@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} chk_petscdir chk_upgrade | tee ${PETSC_ARCH}/lib/petsc/conf/make.log 31 @ln -sf ${PETSC_ARCH}/lib/petsc/conf/make.log make.log 32 +@${OMAKE_PRINTDIR} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} all-local 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log; 33 @egrep -i "( error | error: |no such file or directory)" ${PETSC_ARCH}/lib/petsc/conf/make.log | tee ${PETSC_ARCH}/lib/petsc/conf/error.log > /dev/null 34 +@if test -s ${PETSC_ARCH}/lib/petsc/conf/error.log; then \ 35 printf ${PETSC_TEXT_HILIGHT}"**************************ERROR*************************************\n" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log; \ 36 echo " Error during compile, check ${PETSC_ARCH}/lib/petsc/conf/make.log" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log; \ 37 echo " Send it and ${PETSC_ARCH}/lib/petsc/conf/configure.log to petsc-maint@mcs.anl.gov" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log;\ 38 printf "********************************************************************"${PETSC_TEXT_NORMAL}"\n" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log;\ 39 else \ 40 ${OMAKE} print_mesg_after_build PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log ;\ 41 fi #solaris make likes to print the whole command that gave error. So split this up into the smallest chunk below 42 @echo "Finishing make run at `date +'%a, %d %b %Y %H:%M:%S %z'`" >> ${PETSC_ARCH}/lib/petsc/conf/make.log 43 @if test -s ${PETSC_ARCH}/lib/petsc/conf/error.log; then exit 1; fi 44 45all-local: info libs matlabbin mpi4py-build petsc4py-build libmesh-build slepc-build mfem-build 46 47# 48# Prints information about the system and version of PETSc being compiled 49# 50info: 51 -@echo "==========================================" 52 -@echo " " 53 -@echo "See documentation/faq.html and documentation/bugreporting.html" 54 -@echo "for help with installation problems. Please send EVERYTHING" 55 -@echo "printed out below when reporting problems. Please check the" 56 -@echo "mailing list archives and consider subscribing." 57 -@echo " " 58 -@echo " http://www.mcs.anl.gov/petsc/miscellaneous/mailing-lists.html" 59 -@echo " " 60 -@echo "==========================================" 61 -@echo Starting make run on `hostname` at `date +'%a, %d %b %Y %H:%M:%S %z'` 62 -@echo Machine characteristics: `uname -a` 63 -@echo "-----------------------------------------" 64 -@echo "Using PETSc directory: ${PETSC_DIR}" 65 -@echo "Using PETSc arch: ${PETSC_ARCH}" 66 -@echo "-----------------------------------------" 67 -@grep "define PETSC_VERSION" ${PETSC_DIR}/include/petscversion.h | ${SED} "s/........//" 68 -@echo "-----------------------------------------" 69 -@echo "Using configure Options: ${CONFIGURE_OPTIONS}" 70 -@echo "Using configuration flags:" 71 -@grep "\#define " ${PETSCCONF_H} 72 -@echo "-----------------------------------------" 73 -@echo "Using C compile: ${PETSC_COMPILE}" 74 -@if [ "${MPICC_SHOW}" != "" ]; then \ 75 printf "mpicc -show: %b\n" "${MPICC_SHOW}";\ 76 fi; \ 77 printf "C compiler version: %b\n" "${C_VERSION}"; \ 78 if [ "${CXX}" != "" ]; then \ 79 echo "Using C++ compile: ${PETSC_CXXCOMPILE}";\ 80 if [ "${MPICXX_SHOW}" != "" ]; then \ 81 printf "mpicxx -show: %b\n" "${MPICXX_SHOW}"; \ 82 fi;\ 83 printf "C++ compiler version: %b\n" "${Cxx_VERSION}"; \ 84 fi 85 -@if [ "${FC}" != "" ]; then \ 86 echo "Using Fortran compile: ${PETSC_FCOMPILE}";\ 87 if [ "${MPIFC_SHOW}" != "" ]; then \ 88 printf "mpif90 -show: %b\n" "${MPIFC_SHOW}"; \ 89 fi; \ 90 printf "Fortran compiler version: %b\n" "${FC_VERSION}"; \ 91 fi 92 -@if [ "${CUDAC}" != "" ]; then \ 93 echo "Using CUDA compile: ${PETSC_CUCOMPILE}";\ 94 fi 95 -@echo "-----------------------------------------" 96 -@echo "Using C/C++ linker: ${PCC_LINKER}" 97 -@echo "Using C/C++ flags: ${PCC_LINKER_FLAGS}" 98 -@if [ "${FC}" != "" ]; then \ 99 echo "Using Fortran linker: ${FC_LINKER}";\ 100 echo "Using Fortran flags: ${FC_LINKER_FLAGS}";\ 101 fi 102 -@echo "-----------------------------------------" 103 -@echo "Using system modules: ${LOADEDMODULES}" 104 -@if [ "${MPI_IS_MPIUNI}" = "1" ]; then \ 105 echo Using mpi.h: mpiuni; \ 106 else \ 107 TESTDIR=`mktemp -q -d -t petscmpi-XXXXXXXX` && \ 108 echo '#include <mpi.h>' > $${TESTDIR}/mpitest.c && \ 109 BUF=`${CPP} ${PETSC_CCPPFLAGS} $${TESTDIR}/mpitest.c |grep 'mpi\.h' | ( head -1 ; cat > /dev/null )` && \ 110 echo Using mpi.h: $${BUF}; ${RM} -rf $${TESTDIR}; \ 111 fi 112 -@echo "-----------------------------------------" 113 -@echo "Using libraries: ${PETSC_LIB}" 114 -@echo "------------------------------------------" 115 -@echo "Using mpiexec: ${MPIEXEC}" 116 -@echo "------------------------------------------" 117 -@echo "Using MAKEFLAGS: -j$(MAKE_NP) -l$(MAKE_LOAD) $(MAKEFLAGS)" 118 -@echo "==========================================" 119 120# 121# Build MatLab binaries 122# 123matlabbin: 124 -@if [ "${MATLAB_MEX}" != "" -a "${MATLAB_SOCKET}" != "" -a "${PETSC_SCALAR}" = "real" -a "${PETSC_PRECISION}" = "double" ]; then \ 125 echo "BEGINNING TO COMPILE MATLAB INTERFACE"; \ 126 if [ ! -d "${PETSC_DIR}/${PETSC_ARCH}/lib/petsc" ] ; then ${MKDIR} ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc; fi; \ 127 if [ ! -d "${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/matlab" ] ; then ${MKDIR} ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/matlab; fi; \ 128 cd src/sys/classes/viewer/impls/socket/matlab && ${OMAKE} matlabcodes PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR}; \ 129 echo "========================================="; \ 130 fi 131# 132# Builds PETSc test examples for a given architecture 133# 134test_install: test 135check: test 136test: 137 -+@${OMAKE} PATH="${PETSC_DIR}/${PETSC_ARCH}/lib:${PATH}" PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} test_build 2>&1 | tee ./${PETSC_ARCH}/lib/petsc/conf/test.log 138testx: 139 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testx_build 2>&1 | tee ./${PETSC_ARCH}/lib/petsc/conf/testx.log 140test_build: 141 -@echo "Running test examples to verify correct installation" 142 -@echo "Using PETSC_DIR=${PETSC_DIR} and PETSC_ARCH=${PETSC_ARCH}" 143 +@cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 144 +@cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testex19 145 +@if [ "${HYPRE_LIB}" != "" ] && [ "${PETSC_WITH_BATCH}" = "" ] && [ "${PETSC_SCALAR}" = "real" ]; then \ 146 cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex19_hypre; \ 147 fi; 148 +@if [ "${MUMPS_LIB}" != "" ] && [ "${PETSC_WITH_BATCH}" = "" ]; then \ 149 cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex19_fieldsplit_mumps; \ 150 fi; 151 +@if [ "${SUPERLU_DIST_LIB}" != "" ] && [ "${PETSC_WITH_BATCH}" = "" ]; then \ 152 cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex19_superlu_dist; \ 153 fi; 154 +@if ( [ "${ML_LIB}" != "" ] || [ "${TRILINOS_LIB}" != "" ] ) && [ "${PETSC_WITH_BATCH}" = "" ]; then \ 155 cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex19_ml; \ 156 fi; 157 +@cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ex19.rm 158 +@if [ "${PETSC4PY}" = "yes" ]; then \ 159 cd src/ksp/ksp/examples/tutorials >/dev/null; \ 160 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean; \ 161 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testex100; \ 162 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean; \ 163 fi; 164 +@egrep "^#define PETSC_HAVE_FORTRAN 1" ${PETSCCONF_H} | tee .ftn.log > /dev/null; \ 165 if test -s .ftn.log; then \ 166 cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testex5f; \ 167 fi; ${RM} .ftn.log; 168 +@cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 169 -@echo "Completed test examples" 170testx_build: 171 -@echo "Running graphics test example to verify correct X11 installation" 172 -@echo "Using PETSC_DIR=${PETSC_DIR} and PETSC_ARCH=${PETSC_ARCH}" 173 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 174 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testxex19 175 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 176 -@echo "Completed graphics test example" 177test_usermakefile: 178 -@echo "Testing compile with user makefile" 179 -@echo "Using PETSC_DIR=${PETSC_DIR} and PETSC_ARCH=${PETSC_ARCH}" 180 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} -f ${PETSC_DIR}/share/petsc/Makefile.user ex19 181 @egrep "^#define PETSC_HAVE_FORTRAN 1" ${PETSCCONF_H} | tee .ftn.log > /dev/null; \ 182 if test -s .ftn.log; then \ 183 cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} -f ${PETSC_DIR}/share/petsc/Makefile.user ex5f; \ 184 fi; ${RM} .ftn.log; 185 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 186 -@echo "Completed compile with user makefile" 187 188# Compare ABI/API of two versions of PETSc library with the old one defined by PETSC_{DIR,ARCH}_ABI_OLD 189abitest: 190 @if [ "${PETSC_DIR_ABI_OLD}" == "" ] || [ "${PETSC_ARCH_ABI_OLD}" == "" ]; \ 191 then printf "You must set environment variables PETSC_DIR_ABI_OLD and PETSC_ARCH_ABI_OLD to run abitest\n"; \ 192 exit 1; \ 193 fi; 194 -@echo "Comparing ABI/API of the following two PETSc versions (you must have already configured and built them using GCC and with -g):" 195 -@echo "=========================================================================================" 196 -@echo " Old: PETSC_DIR_ABI_OLD = ${PETSC_DIR_ABI_OLD}" 197 -@echo " PETSC_ARCH_ABI_OLD = ${PETSC_ARCH_ABI_OLD}" 198 -@pushd ${PETSC_DIR_ABI_OLD} >> /dev/null ; echo " Branch = "`git rev-parse --abbrev-ref HEAD` 199 -@echo " New: PETSC_DIR = ${PETSC_DIR}" 200 -@echo " PETSC_ARCH = ${PETSC_ARCH}" 201 -@echo " Branch = "`git rev-parse --abbrev-ref HEAD` 202 -@echo "=========================================================================================" 203 -@$(PYTHON) ${PETSC_DIR}/lib/petsc/bin/maint/abicheck.py -old_dir ${PETSC_DIR_ABI_OLD} -old_arch ${PETSC_ARCH_ABI_OLD} -new_dir ${PETSC_DIR} -new_arch ${PETSC_ARCH} -report_format html 204 205# Compare ABI/API of current PETSC_ARCH/PETSC_DIR with a previous branch 206abitestcomplete: 207 -@if [[ -f "${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/conf/configure.log" ]]; then \ 208 OPTIONS=`grep -h -m 1 "Configure Options: " ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/conf/configure.log | sed "s!Configure Options: --configModules=PETSc.Configure --optionsModule=config.compilerOptions!!g"` ;\ 209echo $${OPTIONS} ;\ 210 fi ; \ 211 if [[ "${PETSC_DIR_ABI_OLD}" != "" ]]; then \ 212 PETSC_DIR_OLD=${PETSC_DIR_ABI_OLD}; \ 213 else \ 214 PETSC_DIR_OLD=${PETSC_DIR}/../petsc-abi; \ 215 fi ; \ 216 echo "=================================================================================================" ;\ 217 echo "Doing ABI/API comparison between" ${branch} " and " `git rev-parse --abbrev-ref HEAD` "using " $${OPTIONS} ;\ 218 echo "=================================================================================================" ;\ 219 if [[ ! -d $${PETSC_DIR_OLD} ]]; then \ 220 git clone ${PETSC_DIR} $${PETSC_DIR_OLD} ; \ 221 else \ 222 cd $${PETSC_DIR_OLD} ; \ 223 git pull ; \ 224 fi ; \ 225 cd $${PETSC_DIR_OLD} ; \ 226 git checkout ${branch} ; \ 227 PETSC_DIR=`pwd` PETSC_ARCH=arch-branch-`git rev-parse ${branch}` ./configure $${OPTIONS} ; \ 228 PETSC_DIR=`pwd` PETSC_ARCH=arch-branch-`git rev-parse ${branch}` make all test ; \ 229 cd ${PETSC_DIR} ; \ 230 ./configure $${OPTIONS}; \ 231 make all test ; \ 232 PETSC_DIR_ABI_OLD=$${PETSC_DIR_OLD} PETSC_ARCH_ABI_OLD=arch-branch-`git rev-parse ${branch}` make abitest 233 234# Deletes PETSc libraries 235deletelibs: 236 -${RM} -rf ${PETSC_LIB_DIR}/libpetsc*.* 237deletemods: 238 -${RM} -f ${PETSC_DIR}/${PETSC_ARCH}/include/petsc*.mod 239 240allclean: 241 -@${OMAKE} -f gmakefile clean 242 243clean:: allclean 244 245distclean: chk_petscdir 246 @if [ -f ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/conf/reconfigure-${PETSC_ARCH}.py ]; then \ 247 echo "*** Preserving ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/conf/reconfigure-${PETSC_ARCH}.py in ${PETSC_DIR} ***"; \ 248 mv -f ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/conf/reconfigure-${PETSC_ARCH}.py ${PETSC_DIR}/; fi 249 @echo "*** Deleting all build files in ${PETSC_DIR}/${PETSC_ARCH} ***" 250 -${RM} -rf ${PETSC_DIR}/${PETSC_ARCH}/ 251 252 253# 254reconfigure: 255 @unset MAKEFLAGS && ${PYTHON} ${PETSC_ARCH}/lib/petsc/conf/reconfigure-${PETSC_ARCH}.py 256# 257install: 258 @${PYTHON} ./config/install.py -destDir=${DESTDIR} 259 +${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} mpi4py-install petsc4py-install libmesh-install slepc-install mfem-install 260 261streams: 262 -@echo "running streams in src/benchmarks/streams" 263 +@cd src/benchmarks/streams; ${OMAKE} PATH="${PETSC_DIR}/${PETSC_ARCH}/lib:${PATH}" PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} streams 264 265stream: 266 -@echo "running stream in src/benchmarks/streams" 267 +@cd src/benchmarks/streams; ${OMAKE} PATH="${PETSC_DIR}/${PETSC_ARCH}/lib:${PATH}" PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} stream 268 269# ------------------------------------------------------------------ 270# 271# All remaining actions are intended for PETSc developers only. 272# PETSc users should not generally need to use these commands. 273# 274# See the users manual for how the tags files may be used from Emacs and Vi/Vim 275# 276alletags: 277 -@${PYTHON} lib/petsc/bin/maint/generateetags.py 278 -@find config -type f -name "*.py" |grep -v SCCS | xargs etags -o TAGS_PYTHON 279 280# obtain gtags from http://www.gnu.org/s/global/ 281allgtags: 282 -@find ${PETSC_DIR}/include ${PETSC_DIR}/src ${PETSC_DIR}/bin -regex '\(.*makefile\|.*\.\(cc\|hh\|cpp\|C\|hpp\|c\|h\|cu\|m\)$$\)' | grep -v ftn-auto | gtags -f - 283 284allfortranstubs: 285 -@${RM} -rf ${PETSC_ARCH}/include/petsc/finclude/ftn-auto/*-tmpdir 286 @${PYTHON} lib/petsc/bin/maint/generatefortranstubs.py ${BFORT} ${VERBOSE} 287 -@${PYTHON} lib/petsc/bin/maint/generatefortranstubs.py -merge ${VERBOSE} 288 -@${RM} -rf ${PETSC_ARCH}/include/petsc/finclude/ftn-auto/*-tmpdir 289deletefortranstubs: 290 -@find . -type d -name ftn-auto | xargs rm -rf 291 292# Builds all the documentation - should be done every night 293alldoc: allcite allpdf alldoc1 alldoc2 docsetdate 294 295# Build just citations 296allcite: chk_loc deletemanualpages 297 -${PYTHON} lib/petsc/bin/maint/countpetsccits.py 298 -${OMAKE} ACTION=manualpages_buildcite tree_basic LOC=${LOC} 299 -@sed -e s%man+../%man+manualpages/% ${LOC}/docs/manualpages/manualpages.cit > ${LOC}/docs/manualpages/htmlmap 300 -@cat ${PETSC_DIR}/src/docs/mpi.www.index >> ${LOC}/docs/manualpages/htmlmap 301 302# Build just PDF manuals + prerequisites 303allpdf: chk_loc allcite 304 -cd src/docs/tex/manual; ${OMAKE} manual.pdf LOC=${LOC} 305 -cd src/docs/tex/manual; ${OMAKE} developers.pdf LOC=${LOC} 306 -cd src/docs/tao_tex/manual; ${OMAKE} manual.pdf LOC=${LOC} 307 308# Build just manual pages + prerequisites 309allmanpages: chk_loc allcite 310 -${OMAKE} ACTION=manualpages tree_basic LOC=${LOC} 311 312# Build just manual examples + prerequisites 313allmanexamples: chk_loc allmanpages 314 -${OMAKE} ACTION=manexamples tree_basic LOC=${LOC} 315 316# Build everything that goes into 'doc' dir except html sources 317alldoc1: chk_loc chk_concepts_dir allcite allmanpages allmanexamples 318 -${OMAKE} manimplementations LOC=${LOC} 319 -${PYTHON} lib/petsc/bin/maint/wwwindex.py ${PETSC_DIR} ${LOC} 320 -${OMAKE} ACTION=getexlist tree_basic LOC=${LOC} 321 -${OMAKE} ACTION=exampleconcepts tree_basic LOC=${LOC} 322 -${PYTHON} lib/petsc/bin/maint/helpindex.py ${PETSC_DIR} ${LOC} 323 324# Builds .html versions of the source 325# html overwrites some stuff created by update-docs - hence this is done later. 326alldoc2: chk_loc 327 -${OMAKE} ACTION=html PETSC_DIR=${PETSC_DIR} alltree LOC=${LOC} 328 -${PYTHON} lib/petsc/bin/maint/update-docs.py ${PETSC_DIR} ${LOC} 329# 330# Makes links for all manual pages in $LOC/docs/manualpages/all 331allman: 332 @cd ${LOC}/docs/manualpages; rm -rf all ; mkdir all ; find * -type d -wholename all -prune -o -name index.html -prune -o -type f -name \*.html -exec ln -s -f ../{} all \; 333 334DOCSETDATE_PRUNE_LIST=-o -type f -wholename share/petsc/saws/linearsolveroptions.html -prune -o -type f -wholename tutorials/HandsOnExercise.html -prune -o -type f -wholename tutorials/TAOHandsOnExercise.html -prune 335 336# modify all generated html files and add in version number, date, canonical URL info. 337docsetdate: chk_petscdir 338 @echo "Updating generated html files with petsc version, date, canonical URL info";\ 339 version_release=`grep '^#define PETSC_VERSION_RELEASE ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 340 version_major=`grep '^#define PETSC_VERSION_MAJOR ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 341 version_minor=`grep '^#define PETSC_VERSION_MINOR ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 342 version_subminor=`grep '^#define PETSC_VERSION_SUBMINOR ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 343 if [ $${version_release} = 0 ]; then \ 344 petscversion=petsc-master; \ 345 export petscversion; \ 346 elif [ $${version_release} = 1 ]; then \ 347 petscversion=petsc-$${version_major}.$${version_minor}.$${version_subminor}; \ 348 export petscversion; \ 349 else \ 350 echo "Unknown PETSC_VERSION_RELEASE: $${version_release}"; \ 351 exit; \ 352 fi; \ 353 datestr=`git log -1 --pretty=format:%ci | cut -d ' ' -f 1`; \ 354 export datestr; \ 355 gitver=`git describe --match "v*"`; \ 356 export gitver; \ 357 find * -type d -wholename src/docs/website \ 358 -prune -o -type d -wholename src/benchmarks/results \ 359 -prune -o -type d -wholename config/BuildSystem/docs/website \ 360 -prune -o -type d -wholename include/web \ 361 -prune -o -type d -wholename 'arch-*' \ 362 -prune -o -type d -wholename lib/petsc/bin/maint \ 363 -prune -o -type d -wholename externalpackages \ 364 -prune ${DOCSETDATE_PRUNE_LIST} -o -type f -name \*.html \ 365 -exec perl -pi -e 's^(<body.*>)^$$1\n <div id=\"version\" align=right><b>$$ENV{petscversion} $$ENV{datestr}</b></div>\n <div id="bugreport" align=right><a href="mailto:petsc-maint\@mcs.anl.gov?subject=Typo or Error in Documentation &body=Please describe the typo or error in the documentation: $$ENV{petscversion} $$ENV{gitver} {} "><small>Report Typos and Errors</small></a></div>^i' {} \; \ 366 -exec perl -pi -e 's^(<head>)^$$1 <link rel="canonical" href="http://www.mcs.anl.gov/petsc/petsc-current/{}" />^i' {} \; ; \ 367 echo "Done fixing version number, date, canonical URL info" 368 369alldocclean: deletemanualpages allcleanhtml 370 371# Deletes man pages (HTML version) 372deletemanualpages: chk_loc 373 -@if [ -d ${LOC} -a -d ${LOC}/docs/manualpages ]; then \ 374 find ${LOC}/docs/manualpages -type f -name "*.html" -exec ${RM} {} \; ;\ 375 ${RM} ${LOC}/docs/exampleconcepts ;\ 376 ${RM} ${LOC}/docs/manualpages/manualpages.cit ;\ 377 ${PYTHON} lib/petsc/bin/maint/update-docs.py ${PETSC_DIR} ${LOC} clean;\ 378 fi 379 380allcleanhtml: 381 -${OMAKE} ACTION=cleanhtml PETSC_DIR=${PETSC_DIR} alltree 382 383chk_concepts_dir: chk_loc 384 @if [ ! -d "${LOC}/docs/manualpages/concepts" ]; then \ 385 echo Making directory ${LOC}/docs/manualpages/concepts for library; ${MKDIR} ${LOC}/docs/manualpages/concepts; fi 386 387########################################################### 388# targets to build distribution and update docs 389########################################################### 390 391# Creates ${HOME}/petsc.tar.gz [and petsc-lite.tar.gz] 392dist: 393 ${PETSC_DIR}/lib/petsc/bin/maint/builddist ${PETSC_DIR} master 394 395# This target works only if you can do 'ssh petsc@login.mcs.anl.gov' 396# also copy the file over to ftp site. 397web-snapshot: 398 @if [ ! -f "${HOME}/petsc-master.tar.gz" ]; then \ 399 echo "~/petsc-master.tar.gz missing! cannot update petsc-master snapshot on mcs-web-site"; \ 400 else \ 401 echo "updating petsc-master snapshot on mcs-web-site"; \ 402 tmpdir=`mktemp -d -t petsc-doc.XXXXXXXX`; \ 403 cd $${tmpdir}; tar -xzf ${HOME}/petsc-master.tar.gz; \ 404 /usr/bin/rsync -e ssh -az --delete $${tmpdir}/petsc-master/ \ 405 petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc/petsc-master ;\ 406 /bin/cp -f /home/petsc/petsc-master.tar.gz /mcs/ftp/pub/petsc/petsc-master.tar.gz;\ 407 ${RM} -rf $${tmpdir} ;\ 408 fi 409 410# build the tarfile - and then update petsc-master snapshot on mcs-web-site 411update-web-snapshot: dist web-snapshot 412 413# This target updates website main pages 414update-web: 415 @cd ${PETSC_DIR}/src/docs; make PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} bib2html; \ 416 /usr/bin/rsync -az -C --exclude=documentation/index.html \ 417 --exclude=documentation/installation.html --exclude=download/index.html \ 418 ${PETSC_DIR}/src/docs/website/ petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc 419 @cd ${PETSC_DIR}/docs; /usr/bin/rsync -az developers.pdf petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc/developers/ 420 @cd ${PETSC_DIR}/src/docs/tex; /usr/bin/rsync -az petscapp.bib petsc.bib petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc/publications 421 422########################################################### 423# 424# See script for details 425# 426gcov: 427 -@$(PYTHON) ${PETSC_DIR}/lib/petsc/bin/maint/gcov.py -run_gcov 428 429mergegcov: 430 -@$(PYTHON) ${PETSC_DIR}/lib/petsc/bin/maint/gcov.py -merge_gcov ${LOC} *.tar.gz 431 432######################## 433# 434# Create the include dependency graph (requires graphviz to be available) 435# 436includegraph: 437 -@${PETSC_DIR}/src/contrib/style/include-graph.sh includegraph.pdf 438 -@echo Include dependency graph written to includegraph.pdf 439 440# 441# ------------------------------------------------------------------------------- 442# 443# Some macros to check if the fortran interface is up-to-date. 444# 445countfortranfunctions: 446 -@cd ${PETSC_DIR}/src/fortran; egrep '^void' custom/*.c auto/*.c | \ 447 cut -d'(' -f1 | tr -s ' ' | cut -d' ' -f2 | uniq | egrep -v "(^$$|Petsc)" | \ 448 sed "s/_$$//" | sort > /tmp/countfortranfunctions 449 450countcfunctions: 451 -@grep PETSC_EXTERN ${PETSC_DIR}/include/*.h | grep "(" | tr -s ' ' | \ 452 cut -d'(' -f1 | cut -d' ' -f3 | grep -v "\*" | tr -s '\012' | \ 453 tr 'A-Z' 'a-z' | sort | uniq > /tmp/countcfunctions 454 455difffortranfunctions: countfortranfunctions countcfunctions 456 -@echo -------------- Functions missing in the fortran interface --------------------- 457 -@${DIFF} /tmp/countcfunctions /tmp/countfortranfunctions | grep "^<" | cut -d' ' -f2 458 -@echo ----------------- Functions missing in the C interface ------------------------ 459 -@${DIFF} /tmp/countcfunctions /tmp/countfortranfunctions | grep "^>" | cut -d' ' -f2 460 -@${RM} /tmp/countcfunctions /tmp/countfortranfunctions 461 462checkbadfortranstubs: 463 -@echo "=========================================" 464 -@echo "Functions with MPI_Comm as an Argument" 465 -@echo "=========================================" 466 -@cd ${PETSC_DIR}/src/fortran/auto; grep '^void' *.c | grep 'MPI_Comm' | \ 467 tr -s ' ' | tr -s ':' ' ' |cut -d'(' -f1 | cut -d' ' -f1,3 468 -@echo "=========================================" 469 -@echo "Functions with a String as an Argument" 470 -@echo "=========================================" 471 -@cd ${PETSC_DIR}/src/fortran/auto; grep '^void' *.c | grep 'char \*' | \ 472 tr -s ' ' | tr -s ':' ' ' |cut -d'(' -f1 | cut -d' ' -f1,3 473 -@echo "=========================================" 474 -@echo "Functions with Pointers to PETSc Objects as Argument" 475 -@echo "=========================================" 476 -@cd ${PETSC_DIR}/src/fortran/auto; \ 477 _p_OBJ=`grep _p_ ${PETSC_DIR}/include/*.h | tr -s ' ' | \ 478 cut -d' ' -f 3 | tr -s '\012' | grep -v '{' | cut -d'*' -f1 | \ 479 sed "s/_p_//g" | tr -s '\012 ' ' *|' ` ; \ 480 for OBJ in $$_p_OBJ; do \ 481 grep "$$OBJ \*" *.c | tr -s ' ' | tr -s ':' ' ' | \ 482 cut -d'(' -f1 | cut -d' ' -f1,3; \ 483 done 484 485checkpackagetests: 486 -@echo "Missing package tests" 487 -@cat config/examples/*.py > configexamples; pushd config/BuildSystem/config/packages/; packages=`ls *.py | sed "s/\\.py//g"`;popd; for i in $${packages}; do j=`echo $${i} | tr '[:upper:]' '[:lower:]'`; printf $${j} ; egrep "(with-$${j}|download-$${j})" configexamples | grep -v "=0" | wc -l ; done 488 -@echo "Missing download package tests" 489 -@cat config/examples/*.py > configexamples; pushd config/BuildSystem/config/packages/; packages=`grep -l "download " *.py | sed "s/\\.py//g"`;popd; for i in $${packages}; do j=`echo $${i} | tr '[:upper:]' '[:lower:]'`; printf $${j} ; egrep "(download-$${j})" configexamples | grep -v "=0" | wc -l ; done 490 491.PHONY: info info_h all deletelibs allclean update \ 492 alletags etags etags_complete etags_noexamples etags_makefiles etags_examples etags_fexamples alldoc allmanualpages \ 493 allhtml allcleanhtml countfortranfunctions \ 494 start_configure configure_petsc configure_clean matlabbin install 495