xref: /petsc/makefile (revision 7afc1a8b0cbfcb157f2be8aa81c6cdb9b187c271) 
1#
2# This is the makefile for compiling PETSc. See
3# http://www.mcs.anl.gov/petsc/documentation/installation.html for directions on installing PETSc.
4# See also conf for additional commands.
5#
6ALL: all
7LOCDIR	 = ./
8DIRS	 = src include tutorials interfaces
9CFLAGS	 =
10FFLAGS	 =
11CPPFLAGS =
12FPPFLAGS =
13
14# next line defines PETSC_DIR and PETSC_ARCH if they are not set
15include ././${PETSC_ARCH}/conf/petscvariables
16include ${PETSC_DIR}/conf/variables
17include ${PETSC_DIR}/conf/rules
18include ${PETSC_DIR}/conf/test
19
20#
21# Basic targets to build PETSc libraries.
22# all: builds the c, fortran, and f90 libraries
23all: chk_makej
24	@${OMAKE}  PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} chk_petscdir chk_upgrade | tee ${PETSC_ARCH}/conf/make.log
25	@ln -sf ${PETSC_ARCH}/conf/make.log make.log
26	@if [ "${MAKE_IS_GNUMAKE}" != "" ]; then \
27	   ${OMAKE_PRINTDIR} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} all-gnumake-local 2>&1 | tee -a ${PETSC_ARCH}/conf/make.log; \
28	elif [ "${PETSC_BUILD_USING_CMAKE}" != "" ]; then \
29	   ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} all-cmake-local 2>&1 | tee -a ${PETSC_ARCH}/conf/make.log \
30		| egrep -v '( --check-build-system |cmake -E | -o CMakeFiles/petsc[[:lower:]]*.dir/| -o lib/libpetsc|CMakeFiles/petsc[[:lower:]]*\.dir/(build|depend|requires)|-f CMakeFiles/Makefile2|Dependee .* is newer than depender |provides\.build. is up to date)'; \
31	 else \
32	   ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} all-legacy-local 2>&1 | tee -a ${PETSC_ARCH}/conf/make.log \
33                | ${GREP} -v "has no symbols"; \
34	 fi
35	@egrep -i "( error | error: |no such file or directory)" ${PETSC_ARCH}/conf/make.log | tee ${PETSC_ARCH}/conf/error.log > /dev/null
36	@if test -s ${PETSC_ARCH}/conf/error.log; then \
37           printf ${PETSC_TEXT_HILIGHT}"**************************ERROR*************************************\n" 2>&1 | tee -a ${PETSC_ARCH}/conf/make.log; \
38           echo "  Error during compile, check ${PETSC_ARCH}/conf/make.log" 2>&1 | tee -a ${PETSC_ARCH}/conf/make.log; \
39           echo "  Send it and ${PETSC_ARCH}/conf/configure.log to petsc-maint@mcs.anl.gov" 2>&1 | tee -a ${PETSC_ARCH}/conf/make.log;\
40           printf "********************************************************************"${PETSC_TEXT_NORMAL}"\n" 2>&1 | tee -a ${PETSC_ARCH}/conf/make.log;\
41	 else \
42	  ${OMAKE} shared_install PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} 2>&1 | tee -a ${PETSC_ARCH}/conf/make.log ;\
43        fi #solaris make likes to print the whole command that gave error. So split this up into the smallest chunk below
44	@echo "Finishing at: `date`" >> ${PETSC_ARCH}/conf/make.log
45	@if test -s ${PETSC_ARCH}/conf/error.log; then exit 1; fi
46
47all-gnumake:
48	@if [ "${MAKE_IS_GNUMAKE}" != "" ]; then \
49          ${OMAKE_PRINTDIR}  PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} PETSC_BUILD_USING_CMAKE="" all;\
50        else printf ${PETSC_TEXT_HILIGHT}"Build not configured for GNUMAKE. Quiting"${PETSC_TEXT_NORMAL}"\n"; exit 1; fi
51
52all-cmake:
53	@if [ "${PETSC_BUILD_USING_CMAKE}" != "" ]; then \
54          ${OMAKE}  PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} MAKE_IS_GNUMAKE="" all;\
55        else printf ${PETSC_TEXT_HILIGHT}"Build not configured for CMAKE. Quiting"${PETSC_TEXT_NORMAL}"\n"; exit 1; fi
56
57all-legacy:
58	@${OMAKE}  PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} PETSC_BUILD_USING_CMAKE="" MAKE_IS_GNUMAKE="" all
59
60all-gnumake-local: chk_makej info gnumake
61
62all-cmake-local: chk_makej info cmakegen cmake
63
64all-legacy-local: chk_makej chklib_dir info deletelibs deletemods build shared_nomesg mpi4py petsc4py
65#
66# Prints information about the system and version of PETSc being compiled
67#
68info: chk_makej
69	-@echo "=========================================="
70	-@echo " "
71	-@echo "See documentation/faq.html and documentation/bugreporting.html"
72	-@echo "for help with installation problems.  Please send EVERYTHING"
73	-@echo "printed out below when reporting problems.  Please check the"
74	-@echo "mailing list archives and consider subscribing."
75	-@echo " "
76	-@echo "  http://www.mcs.anl.gov/petsc/miscellaneous/mailing-lists.html"
77	-@echo " "
78	-@echo "=========================================="
79	-@echo Starting on `hostname` at `date`
80	-@echo Machine characteristics: `uname -a`
81	-@echo "-----------------------------------------"
82	-@echo "Using PETSc directory: ${PETSC_DIR}"
83	-@echo "Using PETSc arch: ${PETSC_ARCH}"
84	-@echo "-----------------------------------------"
85	-@grep "define PETSC_VERSION" ${PETSC_DIR}/include/petscversion.h | ${SED} "s/........//"
86	-@echo "-----------------------------------------"
87	-@echo "Using configure Options: ${CONFIGURE_OPTIONS}"
88	-@echo "Using configuration flags:"
89	-@grep "\#define " ${PETSC_DIR}/${PETSC_ARCH}/include/petscconf.h
90	-@echo "-----------------------------------------"
91	-@echo "Using C/C++ compile: ${PETSC_COMPILE}"
92	-@if [ "${PETSC_LANGUAGE}" = "CONLY" -a "${MPICC_SHOW}" != "" ]; then \
93             printf  "mpicc -show: %b\n" "${MPICC_SHOW}"; \
94	  elif [ "${PETSC_LANGUAGE}" = "CXXONLY" -a "${MPICXX_SHOW}" != "" ]; then \
95             printf "mpicxx -show: %b\n" "${MPICXX_SHOW}"; \
96          fi;
97	-@if [ "${FC}" != "" ]; then \
98	   echo "Using Fortran compile: ${PETSC_FCOMPILE}";\
99           if [ "${MPIFC_SHOW}" != "" ]; then \
100             printf "mpif90 -show: %b\n" "${MPIFC_SHOW}"; \
101           fi; \
102         fi
103	-@if [ "${CUDAC}" != "" ]; then \
104	   echo "Using CUDA compile: ${PETSC_CUCOMPILE}";\
105         fi
106	-@echo "-----------------------------------------"
107	-@echo "Using C/C++ linker: ${PCC_LINKER}"
108	-@echo "Using C/C++ flags: ${PCC_LINKER_FLAGS}"
109	-@if [ "${FC}" != "" ]; then \
110	   echo "Using Fortran linker: ${FC_LINKER}";\
111	   echo "Using Fortran flags: ${FC_LINKER_FLAGS}";\
112         fi
113	-@echo "-----------------------------------------"
114	-@echo "Using libraries: ${PETSC_LIB}"
115	-@echo "------------------------------------------"
116	-@echo "Using mpiexec: ${MPIEXEC}"
117	-@echo "=========================================="
118
119#
120# Builds the PETSc libraries
121# This target also builds fortran77 and f90 interface
122# files and compiles .F files
123#
124build: chk_makej
125	-@echo "BEGINNING TO COMPILE LIBRARIES IN ALL DIRECTORIES"
126	-@echo "========================================="
127	-@${OMAKE}  PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=libfast tree
128	-@${RANLIB} ${PETSC_LIB_DIR}/*.${AR_LIB_SUFFIX}  > tmpf 2>&1 ; ${GREP} -v "has no symbols" tmpf; ${RM} tmpf;
129	-@echo "Completed building libraries"
130	-@echo "========================================="
131#
132#
133# Builds PETSc test examples for a given architecture
134#
135check: test
136test:
137	-@${OMAKE} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} test_build 2>&1 | tee ./${PETSC_ARCH}/conf/test.log
138testx:
139	-@${OMAKE} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} testx_build 2>&1 | tee ./${PETSC_ARCH}/conf/testx.log
140test_build:
141	-@echo "Running test examples to verify correct installation"
142	-@echo "Using PETSC_DIR=${PETSC_DIR} and PETSC_ARCH=${PETSC_ARCH}"
143	@cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} clean
144	@cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} testex19
145	@if [ "${FC}" != "" ]; then \
146          egrep "^#define PETSC_USE_FORTRAN_DATATYPES 1" ${PETSC_DIR}/${PETSC_ARCH}/include/petscconf.h | tee .ftn-dtype.log > /dev/null; \
147          if test -s .ftn-dtype.log; then F90TEST="testex5f90t"; else F90TEST="testex5f"; fi; ${RM} .ftn-dtype.log; \
148          cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} $${F90TEST}; \
149         fi;
150	@cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} clean
151	-@echo "Completed test examples"
152testx_build:
153	-@echo "Running graphics test example to verify correct X11 installation"
154	-@echo "Using PETSC_DIR=${PETSC_DIR} and PETSC_ARCH=${PETSC_ARCH}"
155	@cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} clean
156	@cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} testxex19
157	@cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} clean
158	-@echo "Completed graphics test example"
159
160testexamples: info
161	-@echo "BEGINNING TO COMPILE AND RUN TEST EXAMPLES"
162	-@echo "Due to different numerical round-off on certain"
163	-@echo "machines some of the numbers may not match exactly."
164	-@echo "========================================="
165	-@${OMAKE} PETSC_ARCH=${PETSC_ARCH}  PETSC_DIR=${PETSC_DIR} ACTION=testexamples_C  tree
166	-@echo "Completed compiling and running test examples"
167	-@echo "========================================="
168testfortran: info
169	-@echo "BEGINNING TO COMPILE AND RUN FORTRAN TEST EXAMPLES"
170	-@echo "========================================="
171	-@echo "Due to different numerical round-off on certain"
172	-@echo "machines or the way Fortran formats numbers"
173	-@echo "some of the results may not match exactly."
174	-@echo "========================================="
175	-@if [ "${FC}" != "" ]; then \
176            ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=testexamples_Fortran tree; \
177            echo "Completed compiling and running Fortran test examples"; \
178          else \
179            echo "Error: No FORTRAN compiler available"; \
180          fi
181	-@echo "========================================="
182testexamples_uni: info
183	-@echo "BEGINNING TO COMPILE AND RUN TEST UNI-PROCESSOR EXAMPLES"
184	-@echo "Due to different numerical round-off on certain"
185	-@echo "machines some of the numbers may not match exactly."
186	-@echo "========================================="
187	-@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=testexamples_C_X_MPIUni  tree
188	-@echo "Completed compiling and running uniprocessor test examples"
189	-@echo "========================================="
190testfortran_uni: info
191	-@echo "BEGINNING TO COMPILE AND RUN TEST UNI-PROCESSOR FORTRAN EXAMPLES"
192	-@echo "Due to different numerical round-off on certain"
193	-@echo "machines some of the numbers may not match exactly."
194	-@echo "========================================="
195	-@if [ "${FC}" != "" ]; then \
196            ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=testexamples_Fortran_MPIUni  tree; \
197            echo "Completed compiling and running uniprocessor fortran test examples"; \
198          else \
199            echo "Error: No FORTRAN compiler available"; \
200          fi
201	-@
202	-@echo "========================================="
203
204# Ranlib on the libraries
205ranlib:
206	${RANLIB} ${PETSC_LIB_DIR}/*.${AR_LIB_SUFFIX}
207
208# Deletes PETSc libraries
209deletelibs: chk_makej
210	-${RM} -rf ${PETSC_LIB_DIR}/libpetsc*.*
211deletemods: chk_makej
212	-${RM} -f ${PETSC_DIR}/${PETSC_ARCH}/include/petsc*.mod
213
214# Cleans up build
215allclean-legacy: deletelibs deletemods
216	-@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=clean tree
217allclean-cmake:
218	-@cd ${PETSC_ARCH} && ${OMAKE} clean
219allclean-gnumake:
220	-@${OMAKE} -f gmakefile clean
221
222allclean:
223	@if [ "${MAKE_IS_GNUMAKE}" != "" ]; then \
224	   ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} allclean-gnumake; \
225	elif [ "${PETSC_BUILD_USING_CMAKE}" != "" ]; then \
226	   ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} allclean-cmake; \
227	else \
228	   ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} allclean-legacy; \
229	fi
230#
231reconfigure:
232	@${PYTHON} ${PETSC_ARCH}/conf/reconfigure-${PETSC_ARCH}.py
233#
234install:
235	@${PYTHON} ./config/install.py -destDir=${DESTDIR}
236
237newall:
238	-@cd src/sys;  @${PYTHON} ${PETSC_DIR}/config/builder.py
239	-@cd src/vec;  @${PYTHON} ${PETSC_DIR}/config/builder.py
240	-@cd src/mat;  @${PYTHON} ${PETSC_DIR}/config/builder.py
241	-@cd src/dm;   @${PYTHON} ${PETSC_DIR}/config/builder.py
242	-@cd src/ksp;  @${PYTHON} ${PETSC_DIR}/config/builder.py
243	-@cd src/snes; @${PYTHON} ${PETSC_DIR}/config/builder.py
244	-@cd src/ts;   @${PYTHON} ${PETSC_DIR}/config/builder.py
245
246streams:
247	cd src/benchmarks/streams; ${OMAKE} test
248# ------------------------------------------------------------------
249#
250# All remaining actions are intended for PETSc developers only.
251# PETSc users should not generally need to use these commands.
252#
253#  See the users manual for how the tags files may be used from Emacs and Vi/Vim
254#
255alletags:
256	-@${PYTHON} bin/maint/generateetags.py
257	-@find config -type f -name "*.py" |grep -v SCCS | xargs etags -o TAGS_PYTHON
258
259# obtain gtags from http://www.gnu.org/s/global/
260allgtags:
261	-@find -E ${PETSC_DIR}/{include,src,bin} -regex '(.*makefile|.*\.(cc|hh|cpp|C|hpp|c|h|cu|m)$$)' | grep -v ftn-auto  | gtags -f -
262
263allfortranstubs:
264	-@${RM} -rf include/finclude/ftn-auto/*-tmpdir
265	-@${PYTHON} bin/maint/generatefortranstubs.py ${BFORT}  ${VERBOSE}
266	-@${PYTHON} bin/maint/generatefortranstubs.py -merge  ${VERBOSE}
267	-@${RM} -rf include/finclude/ftn-auto/*-tmpdir
268deletefortranstubs:
269	-@find . -type d -name ftn-auto | xargs rm -rf
270cmakegen:
271	-@${PYTHON} config/cmakegen.py
272#
273# These are here for the target allci and allco, and etags
274#
275
276BMAKEFILES = conf/variables conf/rules conf/test
277SCRIPTS    = bin/maint/builddist  bin/maint/wwwman bin/maint/xclude bin/maint/bugReport.py bin/maint/buildconfigtest bin/maint/builddistlite \
278             bin/maint/buildtest bin/maint/checkBuilds.py bin/maint/copylognightly bin/maint/copylognightly.tao bin/maint/countfiles bin/maint/findbadfiles \
279             bin/maint/fixinclude bin/maint/getexlist bin/maint/getpdflabels.py bin/maint/helpindex.py bin/maint/hosts.local bin/maint/hosts.solaris  \
280             bin/maint/lex.py  bin/maint/mapnameslatex.py bin/maint/startnightly bin/maint/startnightly.tao bin/maint/submitPatch.py \
281             bin/maint/update-docs.py  bin/maint/wwwindex.py bin/maint/xcludebackup bin/maint/xcludecblas bin/maint/zap bin/maint/zapall \
282             config/PETSc/Configure.py config/PETSc/Options.py \
283             config/PETSc/packages/*.py config/PETSc/utilities/*.py
284
285
286# Builds all the documentation - should be done every night
287alldoc: alldoc1 alldoc2 alldoc3 docsetdate
288
289# Build everything that goes into 'doc' dir except html sources
290alldoc1: chk_loc deletemanualpages chk_concepts_dir
291	-${PYTHON} bin/maint/countpetsccits.py
292	-${OMAKE} ACTION=manualpages_buildcite tree_basic LOC=${LOC}
293	-@sed -e s%man+../%man+manualpages/% ${LOC}/docs/manualpages/manualpages.cit > ${LOC}/docs/manualpages/htmlmap
294	-@cat ${PETSC_DIR}/src/docs/mpi.www.index >> ${LOC}/docs/manualpages/htmlmap
295	-cd src/docs/tex/manual; ${OMAKE} manual.pdf LOC=${LOC}
296	-cd src/docs/tex/manual; ${OMAKE} developers.pdf LOC=${LOC}
297	-cd src/docs/tao_tex/manual; ${OMAKE} manual.pdf
298	-${OMAKE} ACTION=manualpages tree_basic LOC=${LOC}
299	-${PYTHON} bin/maint/wwwindex.py ${PETSC_DIR} ${LOC}
300	-${OMAKE} ACTION=manexamples tree_basic LOC=${LOC}
301	-${OMAKE} manconcepts LOC=${LOC}
302	-${OMAKE} ACTION=getexlist tree_basic LOC=${LOC}
303	-${OMAKE} ACTION=exampleconcepts tree_basic LOC=${LOC}
304	-${PYTHON} bin/maint/helpindex.py ${PETSC_DIR} ${LOC}
305
306# Builds .html versions of the source
307# html overwrites some stuff created by update-docs - hence this is done later.
308alldoc2: chk_loc
309	-${OMAKE} ACTION=html PETSC_DIR=${PETSC_DIR} alltree LOC=${LOC}
310	-${PYTHON} bin/maint/update-docs.py ${PETSC_DIR} ${LOC}
311#
312# Builds HTML versions of Matlab scripts
313alldoc3: chk_loc
314	if  [ "${MATLAB_COMMAND}" != "" ]; then\
315          export MATLABPATH=${MATLABPATH}:${PETSC_DIR}/bin/matlab; \
316          cd ${PETSC_DIR}/bin/matlab; ${MATLAB_COMMAND} -nodisplay -nodesktop -r "generatehtml;exit" ; \
317          cd classes; ${MATLAB_COMMAND} -nodisplay -nodesktop -r "generatehtml;exit" ; \
318          cd examples/tutorials; ${MATLAB_COMMAND} -nodisplay -nodesktop -r "generatehtml;exit" ; \
319        fi
320
321# modify all generated html files and add in version number, date, canonical URL info.
322docsetdate: chk_petscdir
323	@echo "Updating generated html files with petsc version, date, canonical URL info";\
324        version_release=`grep '^#define PETSC_VERSION_RELEASE ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \
325        version_major=`grep '^#define PETSC_VERSION_MAJOR ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \
326        version_minor=`grep '^#define PETSC_VERSION_MINOR ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \
327        version_subminor=`grep '^#define PETSC_VERSION_SUBMINOR ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \
328        if  [ $${version_release} = 0 ]; then \
329          petscversion=petsc-dev; \
330          export petscversion; \
331        elif [ $${version_release} = 1 ]; then \
332          petscversion=petsc-$${version_major}.$${version_minor}.$${version_subminor}; \
333          export petscversion; \
334        else \
335          echo "Unknown PETSC_VERSION_RELEASE: $${version_release}"; \
336          exit; \
337        fi; \
338        datestr=`git log -1 --pretty=format:%ci | cut -d ' ' -f 1`; \
339        export datestr; \
340        gitver=`git describe`; \
341        export gitver; \
342        find * -type d -wholename src/docs/website -prune -o -type d -wholename src/benchmarks/results -prune -o \
343          -type d -wholename config/BuildSystem/docs/website -prune -o -type d -wholename include/web -prune -o \
344          -type d -wholename 'arch-*' -prune -o -type d -wholename src/tops -prune -o -type d -wholename externalpackages -prune -o \
345          -type f -wholename tutorials/multiphysics/tutorial.html -prune -o -type f -name \*.html \
346          -exec perl -pi -e 's^(<body.*>)^$$1\n   <div id=\"version\" align=right><b>$$ENV{petscversion} $$ENV{datestr}</b></div>\n   <div id="bugreport" align=right><a href="mailto:petsc-maint\@mcs.anl.gov?subject=Typo or Error in Documentation &body=Please describe the typo or error in the documentation: $$ENV{petscversion} $$ENV{gitver} {} "><small>Report Typos and Errors</small></a></div>^i' {} \; \
347          -exec perl -pi -e 's^(<head>)^$$1 <link rel="canonical" href="http://www.mcs.anl.gov/petsc/petsc-current/{}" />^i' {} \; ; \
348        echo "Done fixing version number, date, canonical URL info"
349
350alldocclean: deletemanualpages allcleanhtml
351
352# Deletes man pages (HTML version)
353deletemanualpages: chk_loc
354	-@if [ -d ${LOC} -a -d ${LOC}/docs/manualpages ]; then \
355          find ${LOC}/docs/manualpages -type f -name "*.html" -exec ${RM} {} \; ;\
356          ${RM} ${LOC}/docs/exampleconcepts ;\
357          ${RM} ${LOC}/docs/manconcepts ;\
358          ${RM} ${LOC}/docs/manualpages/manualpages.cit ;\
359          ${PYTHON} bin/maint/update-docs.py ${PETSC_DIR} ${LOC} clean;\
360        fi
361
362allcleanhtml:
363	-${OMAKE} ACTION=cleanhtml PETSC_DIR=${PETSC_DIR} alltree
364
365chk_concepts_dir: chk_loc
366	@if [ ! -d "${LOC}/docs/manualpages/concepts" ]; then \
367	  echo Making directory ${LOC}/docs/manualpages/concepts for library; ${MKDIR} ${LOC}/docs/manualpages/concepts; fi
368
369###########################################################
370# targets to build distribution and update docs
371###########################################################
372
373# Creates ${HOME}/petsc.tar.gz [and petsc-lite.tar.gz]
374dist:
375	${PETSC_DIR}/bin/maint/builddist ${PETSC_DIR} master
376
377# This target works only if you can do 'ssh petsc@login.mcs.anl.gov'
378# also copy the file over to ftp site.
379web-snapshot:
380	@if [ ! -f "${HOME}/petsc-dev.tar.gz" ]; then \
381	    echo "~/petsc-dev.tar.gz missing! cannot update petsc-dev snapshot on mcs-web-site"; \
382	  else \
383            echo "updating petsc-dev snapshot on mcs-web-site"; \
384	    tmpdir=`mktemp -d -t petsc-doc.XXXXXXXX`; \
385	    cd $${tmpdir}; tar -xzf ${HOME}/petsc-dev.tar.gz; \
386	    /usr/bin/rsync  -e ssh -az --delete $${tmpdir}/petsc-dev/ \
387              petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc/petsc-dev ;\
388	    /bin/cp -f /home/petsc/petsc-dev.tar.gz /mcs/ftp/pub/petsc/petsc-dev.tar.gz;\
389	    ${RM} -rf $${tmpdir} ;\
390	  fi
391
392# build the tarfile - and then update petsc-dev snapshot on mcs-web-site
393update-web-snapshot: dist web-snapshot
394
395# This target updates website main pages
396update-web:
397	@cd ${PETSC_DIR}/src/docs; make PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} bib2html; \
398	/usr/bin/rsync -az -C --exclude=documentation/index.html \
399          --exclude=documentation/installation.html --exclude=download/index.html \
400	  ${PETSC_DIR}/src/docs/website/ petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc
401	@cd ${PETSC_DIR}/docs; /usr/bin/rsync -az developers.pdf petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc/developers/
402	@cd ${PETSC_DIR}/src/docs/tex; /usr/bin/rsync -az petscapp.bib petsc.bib petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc/publications
403
404#
405#  builds a single list of files for each PETSc library so they may all be built in parallel
406#  without a recursive set of make calls
407createfastbuild:
408	cd src/vec; ${RM} -f files; /bin/echo -n "SOURCEC = " > files; make tree ACTION=sourcelist BASE_DIR=${PETSC_DIR}/src/vec
409
410###########################################################
411#
412#  See script for details
413#
414gcov:
415	-@${PETSC_DIR}/bin/maint/gcov.py -run_gcov
416
417mergegcov:
418	-@${PETSC_DIR}/bin/maint/gcov.py -merge_gcov ${LOC} *.tar.gz
419
420# usage make allrcslabel NEW_RCS_LABEL=v_2_0_28
421allrcslabel:
422	-@${OMAKE} PETSC_ARCH=${PETSC_ARCH} NEW_RCS_LABEL=${NEW_RCS_LABEL} ACTION=rcslabel  alltree
423#
424# -------------------------------------------------------------------------------
425#
426# Some macros to check if the fortran interface is up-to-date.
427#
428countfortranfunctions:
429	-@cd ${PETSC_DIR}/src/fortran; egrep '^void' custom/*.c auto/*.c | \
430	cut -d'(' -f1 | tr -s  ' ' | cut -d' ' -f2 | uniq | egrep -v "(^$$|Petsc)" | \
431	sed "s/_$$//" | sort > /tmp/countfortranfunctions
432
433countcfunctions:
434	-@grep extern ${PETSC_DIR}/include/*.h  | grep "(" | tr -s ' ' | \
435	cut -d'(' -f1 | cut -d' ' -f3 | grep -v "\*" | tr -s '\012' |  \
436	tr 'A-Z' 'a-z' |  sort > /tmp/countcfunctions
437
438difffortranfunctions: countfortranfunctions countcfunctions
439	-@echo -------------- Functions missing in the fortran interface ---------------------
440	-@${DIFF} /tmp/countcfunctions /tmp/countfortranfunctions | grep "^<" | cut -d' ' -f2
441	-@echo ----------------- Functions missing in the C interface ------------------------
442	-@${DIFF} /tmp/countcfunctions /tmp/countfortranfunctions | grep "^>" | cut -d' ' -f2
443	-@${RM}  /tmp/countcfunctions /tmp/countfortranfunctions
444
445checkbadfortranstubs:
446	-@echo "========================================="
447	-@echo "Functions with MPI_Comm as an Argument"
448	-@echo "========================================="
449	-@cd ${PETSC_DIR}/src/fortran/auto; grep '^void' *.c | grep 'MPI_Comm' | \
450	tr -s ' ' | tr -s ':' ' ' |cut -d'(' -f1 | cut -d' ' -f1,3
451	-@echo "========================================="
452	-@echo "Functions with a String as an Argument"
453	-@echo "========================================="
454	-@cd ${PETSC_DIR}/src/fortran/auto; grep '^void' *.c | grep 'char \*' | \
455	tr -s ' ' | tr -s ':' ' ' |cut -d'(' -f1 | cut -d' ' -f1,3
456	-@echo "========================================="
457	-@echo "Functions with Pointers to PETSc Objects as Argument"
458	-@echo "========================================="
459	-@cd ${PETSC_DIR}/src/fortran/auto; \
460	_p_OBJ=`grep _p_ ${PETSC_DIR}/include/*.h | tr -s ' ' | \
461	cut -d' ' -f 3 | tr -s '\012' | grep -v '{' | cut -d'*' -f1 | \
462	sed "s/_p_//g" | tr -s '\012 ' ' *|' ` ; \
463	for OBJ in $$_p_OBJ; do \
464	grep "$$OBJ \*" *.c | tr -s ' ' | tr -s ':' ' ' | \
465	cut -d'(' -f1 | cut -d' ' -f1,3; \
466	done
467#
468# Automatically generates PETSc exercises in html from the tutorial examples.
469#
470# The introduction for each section is obtained from docs/manualpages/header_${MANSEC} is under RCS and may be edited
471#  (used also in introductions to the manual pages)
472# The overall introduction is in docs/exercises/introduction.html and is under RCS and may be edited
473# The list of exercises is from TUTORIALS in each directory's makefile
474#
475# DO NOT EDIT the pageform.txt or *.htm files generated since they will be automatically replaced.
476# The pagemaker rule is in the file conf (at the bottom)
477#
478# Eventually the line below will replace the two cd in the rule below, it is just this way now for speed
479#	-@${OMAKE} PETSC_DIR=${PETSC_DIR} pagemaker
480#
481exercises:
482	-@echo "========================================="
483	-@echo "Generating HTML tutorial exercises"
484	-@${RM} docs/pageform.txt
485	-@echo "title=\"PETSc Exercises\""                >  docs/pageform.txt
486	-@echo "access_title=Exercise Sections"              >>  docs/pageform.txt
487	-@echo "access_format=short"                        >> docs/pageform.txt
488	-@echo "startpage=../exercises/introduction.htm"  >> docs/pageform.txt
489	-@echo "NONE title=\"Introduction\" command=link src=../exercises/introduction.htm" >> docs/pageform.txt
490	-@echo "Generating HTML for individual directories"
491	-@echo "========================================="
492	-@${OMAKE} PETSC_DIR=${PETSC_DIR} ACTION=pagemaker tree
493	-@echo "Completed HTML for individual directories"
494	-@echo "NONE title=\"<HR>\" " >> docs/pageform.txt;
495	-@echo "NONE title=\"PETSc Documentation\" command=link src=../index.html target=replace" >> docs/pageform.txt
496	/home/MPI/class/mpiexmpl/maint/makepage.new -pageform=docs/pageform.txt -access_extra=/dev/null -outdir=docs/exercises
497	-@echo "========================================="
498
499.PHONY: info info_h all build testexamples testfortran testexamples_uni testfortran_uni ranlib deletelibs allclean update \
500        alletags etags etags_complete etags_noexamples etags_makefiles etags_examples etags_fexamples alldoc allmanualpages \
501        allhtml allcleanhtml  allci allco allrcslabel countfortranfunctions \
502        start_configure configure_petsc configure_clean
503
504petscao : petscmat petscao.f90.h
505petscdm : petscksp petscdm.f90.h
506petscdraw : petsc petscdraw.f90.h
507petscis : petsc petscis.f90.h
508petscksp : petscpc  petscksp.f90.h
509petsclog : petsc petsclog.f90.h
510petscmat : petscvec petscmat.f90.h
511petscmg : petscksp petscmg.f90.h
512petscpc : petscmat petscpc.f90.h
513petscsnes : petscksp petscsnes.f90.h
514petscsys : petsc petscsys.f90.h
515petscts : petscsnes petscts.f90.h
516petsc : petsc.f90.h
517petscvec : petscis petscvec.f90.h
518petscviewer : petsc petscviewer.f90.h
519petscmesh : petsc petscmesh.f90.h
520modules : petscao petscdm petscdraw petscis petscksp petsclog petscmat petscmg petscpc petscsnes petscsys petscts petsc petscvec petscviewer petscmesh
521