1# 2# This is the makefile for compiling PETSc. See 3# http://www.mcs.anl.gov/petsc/petsc-as/documentation/installation.html for directions on installing PETSc. 4# See also conf for additional commands. 5# 6ALL: all 7LOCDIR = ./ 8DIRS = src include 9CFLAGS = 10FFLAGS = 11 12include ${PETSC_DIR}/conf/base 13include ${PETSC_DIR}/conf/test 14 15# 16# Basic targets to build PETSc libraries. 17# all: builds the c, fortran, and f90 libraries 18all: 19 @if [ "`whoami`" = "root" ]; then \ 20 echo "********************************************************************"; \ 21 echo " Do not run configure as root, or using sudo.";\ 22 echo " That should be reserved for installation";\ 23 echo "********************************************************************"; \ 24 exit 1; fi 25 @${OMAKE} PETSC_ARCH=${PETSC_ARCH} chkpetsc_dir 26 -@${OMAKE} all_build 2>&1 | tee ${PETSC_ARCH}/conf/make.log 27 -@egrep -i "( error | error:)" ${PETSC_ARCH}/conf/make.log > /dev/null; if [ "$$?" = "0" ]; then \ 28 echo "********************************************************************"; \ 29 echo " Error during compile, check ${PETSC_ARCH}/conf/make.log"; \ 30 echo " Send it and ${PETSC_ARCH}/conf/configure.log to petsc-maint@mcs.anl.gov";\ 31 echo "********************************************************************"; \ 32 exit 1; fi 33 34all_build: chk_petsc_dir chklib_dir info info_h deletelibs build shared 35# 36# Prints information about the system and version of PETSc being compiled 37# 38info: 39 -@echo "==========================================" 40 -@echo " " 41 -@echo "See documentation/faq.html and documentation/bugreporting.html" 42 -@echo "for help with installation problems. Please send EVERYTHING" 43 -@echo "printed out below when reporting problems" 44 -@echo " " 45 -@echo "To subscribe to the PETSc announcement list, send mail to " 46 -@echo "majordomo@mcs.anl.gov with the message: " 47 -@echo "subscribe petsc-announce" 48 -@echo " " 49 -@echo "To subscribe to the PETSc users mailing list, send mail to " 50 -@echo "majordomo@mcs.anl.gov with the message: " 51 -@echo "subscribe petsc-users" 52 -@echo " " 53 -@echo "==========================================" 54 -@echo On `date` on `hostname` 55 -@echo Machine characteristics: `uname -a` 56 -@echo "-----------------------------------------" 57 -@echo "Using PETSc directory: ${PETSC_DIR}" 58 -@echo "Using PETSc arch: ${PETSC_ARCH}" 59 -@echo "-----------------------------------------" 60 -@grep "define PETSC_VERSION" ${PETSC_DIR}/include/petscversion.h | ${SED} "s/........//" 61 -@echo "-----------------------------------------" 62 -@echo "Using configure Options: ${CONFIGURE_OPTIONS}" 63 -@echo "Using configuration flags:" 64 -@grep "\#define " ${PETSC_DIR}/${PETSC_ARCH}/include/petscconf.h 65 -@echo "-----------------------------------------" 66 -@echo "Using include paths: ${PETSC_INCLUDE}" 67 -@echo "------------------------------------------" 68 -@echo "Using C/C++ compiler: ${PCC} ${PCC_FLAGS} ${COPTFLAGS} ${CFLAGS}" 69 -@echo "C/C++ Compiler version: " `${CCV}` 70 -@if [ "${FC}" != "" ]; then \ 71 echo "Using Fortran compiler: ${FC} ${FC_FLAGS} ${FFLAGS} ${FPP_FLAGS}";\ 72 echo "Fortran Compiler version: " `${FCV}`;\ 73 fi 74 -@echo "-----------------------------------------" 75 -@echo "Using C/C++ linker: ${CC_LINKER}" 76 -@if [ "${FC}" != "" ]; then \ 77 echo "Using Fortran linker: ${FC_LINKER}";\ 78 fi 79 -@echo "-----------------------------------------" 80 -@echo "Using libraries: ${PETSC_LIB}" 81 -@echo "------------------------------------------" 82 -@echo "Using mpiexec: ${MPIEXEC}" 83 -@echo "==========================================" 84# 85# 86MINFO = ${PETSC_DIR}/${PETSC_ARCH}/include/petscmachineinfo.h 87info_h: 88 -@$(RM) -f ${MINFO} MINFO 89 -@echo "static const char *petscmachineinfo = \"\__n__\"" >> MINFO 90 -@echo "\"-----------------------------------------\__n__\"" >> MINFO 91 -@if [ -f /usr/bin/cygcheck.exe ]; then \ 92 echo "\"Libraries compiled on `date` on `hostname|/usr/bin/dos2unix` \__n__\"" >> MINFO; \ 93 else \ 94 echo "\"Libraries compiled on `date` on `hostname` \__n__\"" >> MINFO; \ 95 fi 96 -@echo "\"Machine characteristics: `uname -a` \__n__\"" >> MINFO 97 -@echo "\"Using PETSc directory: ${PETSC_DIR}\__n__\"" >> MINFO 98 -@echo "\"Using PETSc arch: ${PETSC_ARCH}\__n__\"" >> MINFO 99 -@echo "\"-----------------------------------------\"; " >> MINFO 100 -@echo "static const char *petsccompilerinfo = \"\__n__\"" >> MINFO 101 -@echo "\"Using C compiler: ${PCC} ${PCC_FLAGS} ${COPTFLAGS} ${CFLAGS}\__n__\"" >> MINFO 102 -@echo "\"Using Fortran compiler: ${FC} ${FC_FLAGS} ${FFLAGS} ${FPP_FLAGS}\__n__\"" >> MINFO 103 -@echo "\"-----------------------------------------\"; " >> MINFO 104 -@echo "static const char *petsccompilerflagsinfo = \"\__n__\"" >> MINFO 105 -@echo "\"Using include paths: ${PETSC_INCLUDE}\__n__\"" >> MINFO 106 -@echo "\"------------------------------------------\"; " >> MINFO 107 -@echo "static const char *petsclinkerinfo = \"\__n__\"" >> MINFO 108 -@echo "\"Using C linker: ${CLINKER}\__n__\"" >> MINFO 109 -@echo "\"Using Fortran linker: ${FLINKER}\__n__\"" >> MINFO 110 -@echo "\"Using libraries: ${PETSC_LIB} \__n__\"" >> MINFO 111 -@echo "\"------------------------------------------\"; " >> MINFO 112 -@cat MINFO | ${SED} -e 's/\\ /\\\\ /g' | ${SED} -e 's/__n__/n/g' > ${MINFO} 113 -@ if [ -f /usr/bin/cygcheck.exe ]; then /usr/bin/dos2unix ${MINFO} 2> /dev/null; fi 114 -@$(RM) -f MINFO 115 116# 117# Builds the PETSc libraries 118# This target also builds fortran77 and f90 interface 119# files and compiles .F files 120# 121build: 122 -@echo "BEGINNING TO COMPILE LIBRARIES IN ALL DIRECTORIES" 123 -@echo "=========================================" 124 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=libfast tree 125 -@${RANLIB} ${PETSC_LIB_DIR}/*.${AR_LIB_SUFFIX} 126 -@echo "Completed building libraries" 127 -@echo "=========================================" 128# 129# 130# Builds PETSc test examples for a given architecture 131# 132test: 133 @${OMAKE} PETSC_ARCH=${PETSC_ARCH} chkpetsc_dir 134 -@${OMAKE} test_build 2>&1 | tee ${PETSC_ARCH}/conf/test.log 135test_build: 136 -@echo "Running test examples to verify correct installation" 137 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testex19 138 @if [ "${FC}" != "" ]; then cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testex5f; fi; 139 -@echo "Completed test examples" 140 141testexamples: info 142 -@echo "BEGINNING TO COMPILE AND RUN TEST EXAMPLES" 143 -@echo "Due to different numerical round-off on certain" 144 -@echo "machines some of the numbers may not match exactly." 145 -@echo "=========================================" 146 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=testexamples_C tree 147 -@echo "Completed compiling and running test examples" 148 -@echo "=========================================" 149testfortran: info 150 -@echo "BEGINNING TO COMPILE AND RUN FORTRAN TEST EXAMPLES" 151 -@echo "=========================================" 152 -@echo "Due to different numerical round-off on certain" 153 -@echo "machines or the way Fortran formats numbers" 154 -@echo "some of the results may not match exactly." 155 -@echo "=========================================" 156 -@if [ "${FC}" != "" ]; then \ 157 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=testexamples_Fortran tree; \ 158 echo "Completed compiling and running Fortran test examples"; \ 159 else \ 160 echo "Error: No FORTRAN compiler available"; \ 161 fi 162 -@echo "=========================================" 163testexamples_uni: info 164 -@echo "BEGINNING TO COMPILE AND RUN TEST UNI-PROCESSOR EXAMPLES" 165 -@echo "Due to different numerical round-off on certain" 166 -@echo "machines some of the numbers may not match exactly." 167 -@echo "=========================================" 168 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=testexamples_C_X11_MPIUni tree 169 -@echo "Completed compiling and running uniprocessor test examples" 170 -@echo "=========================================" 171testfortran_uni: info 172 -@echo "BEGINNING TO COMPILE AND RUN TEST UNI-PROCESSOR FORTRAN EXAMPLES" 173 -@echo "Due to different numerical round-off on certain" 174 -@echo "machines some of the numbers may not match exactly." 175 -@echo "=========================================" 176 -@if [ "${FC}" != "" ]; then \ 177 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=testexamples_Fortran_MPIUni tree; \ 178 echo "Completed compiling and running uniprocessor fortran test examples"; \ 179 else \ 180 echo "Error: No FORTRAN compiler available"; \ 181 fi 182 -@ 183 -@echo "=========================================" 184 185# Ranlib on the libraries 186ranlib: 187 ${RANLIB} ${PETSC_LIB_DIR}/*.${AR_LIB_SUFFIX} 188 189# Deletes PETSc libraries 190deletelibs: 191 -${RM} -f ${PETSC_LIB_DIR}/libpetsc*.* 192 193# Cleans up build 194allclean: deletelibs 195 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=clean tree 196 197 198# 199# Check if PETSC_DIR variable specified is valid 200# 201chk_petsc_dir: 202 @if [ ! -f ${PETSC_DIR}/include/petscversion.h ]; then \ 203 echo "Incorrect PETSC_DIR specified: ${PETSC_DIR}!"; \ 204 echo "You need to use / to separate directories, not \\!"; \ 205 echo "Aborting build"; \ 206 false; fi 207# 208# 209install: 210 -@if [ "${INSTALL_DIR}" = "${PETSC_DIR}" ]; then \ 211 echo "Install directory is current directory; nothing needs to be done";\ 212 else \ 213 echo Installing PETSc at ${INSTALL_DIR};\ 214 if [ ! -d `dirname ${INSTALL_DIR}` ]; then \ 215 ${MKDIR} `dirname ${INSTALL_DIR}` ; \ 216 fi;\ 217 if [ ! -d ${INSTALL_DIR} ]; then \ 218 ${MKDIR} ${INSTALL_DIR} ; \ 219 fi;\ 220 ${CP} -fr include ${INSTALL_DIR};\ 221 ${CP} ${PETSC_ARCH}/include/* ${INSTALL_DIR}/include;\ 222 if [ ! -d ${INSTALL_DIR}/conf ]; then \ 223 ${MKDIR} ${INSTALL_DIR}/conf ; \ 224 fi;\ 225 ${CP} -fr conf ${INSTALL_DIR} ; \ 226 ${RM} -fr ${INSTALL_DIR}/docsonly ;\ 227 sed -i "" 's?$${PETSC_DIR}?TMP_INSTALL_DIR?g' ${INSTALL_DIR}/conf/* ;\ 228 sed -i "" s?TMP_INSTALL_DIR?${INSTALL_DIR}?g ${INSTALL_DIR}/conf/* ;\ 229 sed -i "" 's?/$${PETSC_ARCH}??g' ${INSTALL_DIR}/conf/* ;\ 230 ${CP} -fr ${PETSC_ARCH}/conf/* ${INSTALL_DIR}/conf;\ 231 ${CP} -fr ${PETSC_ARCH}/lib ${INSTALL_DIR} ;\ 232 ${RANLIB} ${INSTALL_DIR}/lib/*.a ;\ 233 ${OMAKE} PETSC_ARCH="" PETSC_DIR=${INSTALL_DIR} shared; \ 234 echo "sh/bash: PETSC_DIR="${INSTALL_DIR}"; export PETSC_DIR";\ 235 echo "sh/bash: unset PETSC_ARCH" ;\ 236 echo "csh/tcsh: setenv PETSC_DIR " ${INSTALL_DIR} ;\ 237 echo "csh/tcsh: unsetenv PETSC_ARCH"; \ 238 echo "Then do make test to verify correct install";\ 239 fi; 240 241install_src: 242 -@if [ "${INSTALL_DIR}" = "${PETSC_DIR}" ]; then \ 243 echo "You did not set a directory to install to";\ 244 else \ 245 echo Installing PETSc source at ${INSTALL_DIR};\ 246 if [ ! -d `dirname ${INSTALL_DIR}` ]; then \ 247 ${MKDIR} `dirname ${INSTALL_DIR}` ; \ 248 fi;\ 249 if [ ! -d ${INSTALL_DIR} ]; then \ 250 ${MKDIR} ${INSTALL_DIR} ; \ 251 fi;\ 252 ${CP} -fr src ${INSTALL_DIR};\ 253 fi; 254 255install_docs: 256 -@if [ "${INSTALL_DIR}" = "${PETSC_DIR}" ]; then \ 257 echo "You did not set a directory to install to";\ 258 else \ 259 echo Installing PETSc documentation at ${INSTALL_DIR};\ 260 if [ ! -d `dirname ${INSTALL_DIR}` ]; then \ 261 ${MKDIR} `dirname ${INSTALL_DIR}` ; \ 262 fi;\ 263 if [ ! -d ${INSTALL_DIR} ]; then \ 264 ${MKDIR} ${INSTALL_DIR} ; \ 265 fi;\ 266 ${CP} -fr docs ${INSTALL_DIR};\ 267 ${RM} -fr docs/tex;\ 268 fi; 269# ------------------------------------------------------------------ 270# 271# All remaining actions are intended for PETSc developers only. 272# PETSc users should not generally need to use these commands. 273# 274 275# To access the tags in EMACS, type M-x visit-tags-table and specify 276# the file petsc/TAGS. 277# 1) To move to where a PETSc function is defined, enter M-. and the 278# function name. 279# 2) To search for a string and move to the first occurrence, 280# use M-x tags-search and the string. 281# To locate later occurrences, use M-, 282# Builds all etags files 283alletags: 284 -@bin/maint/generateetags.py 285 -@find config -type f -name "*.py" |grep -v SCCS | xargs etags -o TAGS_PYTHON 286 287allfortranstubs: 288 -@bin/maint/generatefortranstubs.py ${BFORT} 289deletefortranstubs: 290 -@find . -type d -name ftn-auto | xargs rm -rf 291# 292# These are here for the target allci and allco, and etags 293# 294 295BMAKEFILES = conf/base conf/test bmake/adic.init bmake/adicmf.init 296SCRIPTS = bin/maint/builddist bin/maint/wwwman bin/maint/xclude bin/maint/bugReport.py bin/maint/buildconfigtest bin/maint/builddistlite \ 297 bin/maint/buildtest bin/maint/checkBuilds.py bin/maint/copylognightly bin/maint/copylognightly.tao bin/maint/countfiles bin/maint/findbadfiles \ 298 bin/maint/fixinclude bin/maint/getexlist bin/maint/getpdflabels.py bin/maint/helpindex.py bin/maint/hosts.local bin/maint/hosts.solaris \ 299 bin/maint/lex.py bin/maint/mapnameslatex.py bin/maint/startnightly bin/maint/startnightly.tao bin/maint/submitPatch.py \ 300 bin/maint/update-docs.py bin/maint/wwwindex.py bin/maint/xcludebackup bin/maint/xcludecblas bin/maint/zap bin/maint/zapall \ 301 config/PETSc/Configure.py config/PETSc/Options.py \ 302 config/PETSc/packages/*.py config/PETSc/utilities/*.py 303 304 305# Builds all the documentation - should be done every night 306alldoc: alldoc1 alldoc2 307 308# Build everything that goes into 'doc' dir except html sources 309alldoc1: chk_loc deletemanualpages chk_concepts_dir 310 -${OMAKE} ACTION=manualpages_buildcite tree_basic LOC=${LOC} 311 -@sed -e s%man+../%man+manualpages/% ${LOC}/docs/manualpages/manualpages.cit > ${LOC}/docs/manualpages/htmlmap 312 -@cat ${PETSC_DIR}/src/docs/mpi.www.index >> ${LOC}/docs/manualpages/htmlmap 313 -cd src/docs/tex/manual; ${OMAKE} manual.pdf LOC=${LOC} 314 -${OMAKE} ACTION=manualpages tree_basic LOC=${LOC} 315 -bin/maint/wwwindex.py ${PETSC_DIR} ${LOC} 316 -${OMAKE} ACTION=manexamples tree_basic LOC=${LOC} 317 -${OMAKE} manconcepts LOC=${LOC} 318 -${OMAKE} ACTION=getexlist tree_basic LOC=${LOC} 319 -${OMAKE} ACTION=exampleconcepts tree_basic LOC=${LOC} 320 -bin/maint/helpindex.py ${PETSC_DIR} ${LOC} 321 -grep -h Polymorphic include/*.h | grep -v '#define ' | sed "s?PetscPolymorphic[a-zA-Z]*(??g" | cut -f1 -d"{" > tmppoly 322 -bin/maint/processpoly.py ${PETSC_DIR} ${LOC} 323 -${RM} tmppoly 324 325# Builds .html versions of the source 326# html overwrites some stuff created by update-docs - hence this is done later. 327alldoc2: chk_loc 328 -${OMAKE} ACTION=html PETSC_DIR=${PETSC_DIR} alltree LOC=${LOC} 329 -bin/maint/update-docs.py ${PETSC_DIR} ${LOC} 330 331alldocclean: deletemanualpages allcleanhtml 332 333# Deletes man pages (HTML version) 334deletemanualpages: chk_loc 335 -@if [ -d ${LOC} -a -d ${LOC}/docs/manualpages ]; then \ 336 find ${LOC}/docs/manualpages -type f -name "*.html" -exec ${RM} {} \; ;\ 337 ${RM} ${LOC}/docs/exampleconcepts ;\ 338 ${RM} ${LOC}/docs/manconcepts ;\ 339 ${RM} ${LOC}/docs/manualpages/manualpages.cit ;\ 340 bin/maint/update-docs.py ${PETSC_DIR} ${LOC} clean;\ 341 fi 342 343allcleanhtml: 344 -${RM} include/adic/*.h.html 345 -${OMAKE} ACTION=cleanhtml PETSC_DIR=${PETSC_DIR} alltree 346 347chk_concepts_dir: chk_loc 348 @if [ ! -d "${LOC}/docs/manualpages/concepts" ]; then \ 349 echo Making directory ${LOC}/docs/manualpages/concepts for library; ${MKDIR} ${LOC}/docs/manualpages/concepts; fi 350 351########################################################### 352# targets to build distribution and update docs 353########################################################### 354 355# Creates ${HOME}/petsc.tar.gz [and petsc-lite.tar.gz] 356dist: 357 ${PETSC_DIR}/bin/maint/builddist ${PETSC_DIR} 358 359# This target works only if you can do 'ssh petsc@harley.mcs.anl.gov' 360# also copy the file over to ftp site. 361web-snapshot: 362 @if [ ! -f "${HOME}/petsc-dev.tar.gz" ]; then \ 363 echo "~/petsc-dev.tar.gz missing! cannot update petsc-dev snapshot on www-unix"; \ 364 else \ 365 echo "updating petsc-dev snapshot on www-unix"; \ 366 tmpdir=`mktemp -d -t petsc-doc.XXXXXXXX`; \ 367 cd $${tmpdir}; tar -xzf ${HOME}/petsc-dev.tar.gz; \ 368 /usr/bin/rsync -e ssh -az --delete $${tmpdir}/petsc-dev/ \ 369 petsc@harley.mcs.anl.gov:/nfs/www-unix/petsc/petsc-as/snapshots/petsc-dev ;\ 370 /bin/cp -f /home/petsc/petsc-dev.tar.gz /nfs/ftp/pub/petsc/petsc-dev.tar.gz;\ 371 ${RM} -rf $${tmpdir} ;\ 372 fi 373 374# build the tarfile - and then update petsc-dev snapshot on www-unix 375update-web-snapshot: dist web-snapshot 376 377# This target updates website main pages 378update-web: 379 @cd ${PETSC_DIR}/src/docs; make PETSC_ARCH=docsonly PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} bib2html; \ 380 /usr/bin/rsync -az -C --exclude=BitKeeper --exclude=documentation/installation.html \ 381 ${PETSC_DIR}/src/docs/website/ petsc@harley.mcs.anl.gov:/nfs/www-unix/petsc/petsc-as 382 @cd ${PETSC_DIR}/src/docs/tex/manual; make developers.pdf PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} LOC=${PETSC_DIR}; \ 383 /usr/bin/rsync -az developers.pdf petsc@harley.mcs.anl.gov:/nfs/www-unix/petsc/petsc-as/developers/ 384 385########################################################### 386 387# 388# makes .lines files for all source code 389# 390allgcov: 391 -@${RM} -rf /tmp/gcov 392 -@mkdir /tmp/gcov 393 -${OMAKE} ACTION=gcov PETSC_DIR=${PETSC_DIR} tree 394 395# usage make allrcslabel NEW_RCS_LABEL=v_2_0_28 396allrcslabel: 397 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} NEW_RCS_LABEL=${NEW_RCS_LABEL} ACTION=rcslabel alltree 398# 399# The commands below are for generating ADIC versions of the code; 400# they are not currently used. 401# 402alladicignore: 403 -@${RM} ${INSTALL_LIB_DIR}/adicignore 404 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} ACTION=adicignore tree 405 406alladic: 407 -@echo "Beginning to compile ADIC source code in all directories" 408 -@echo "Using ADIC compiler: ${ADIC_CC} ${CCPPFLAGS}" 409 -@echo "=========================================" 410 -@cd include ; \ 411 ${ADIC_CC} -s -f 1 ${CCPPFLAGS} petsc.h 412 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} ACTION=adic tree 413 -@cd src/inline ; \ 414 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} adic 415 416alladiclib: 417 -@echo "Beginning to compile ADIC libraries in all directories" 418 -@echo "Using compiler: ${PCC} ${COPTFLAGS}" 419 -@echo "-----------------------------------------" 420 -@echo "Using PETSc flags: ${PETSCFLAGS} ${PCONF}" 421 -@echo "-----------------------------------------" 422 -@echo "Using configuration flags:" 423 -@grep "define " ${PETSC_ARCH}/include/petscconf.h 424 -@echo "-----------------------------------------" 425 -@echo "Using include paths: ${PETSC_INCLUDE}" 426 -@echo "-----------------------------------------" 427 -@echo "Using PETSc directory: ${PETSC_DIR}" 428 -@echo "Using PETSc arch: ${PETSC_ARCH}" 429 -@echo "=========================================" 430 -@${RM} -f ${INSTALL_LIB_DIR}/*adic.${AR_LIB_SUFFIX} 431 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} ACTION=adiclib tree 432 -@cd src/adic/src ; \ 433 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} lib 434 435# ------------------------------------------------------------------------------- 436# 437# Some macros to check if the fortran interface is up-to-date. 438# 439countfortranfunctions: 440 -@cd ${PETSC_DIR}/src/fortran; egrep '^void' custom/*.c auto/*.c | \ 441 cut -d'(' -f1 | tr -s ' ' | cut -d' ' -f2 | uniq | egrep -v "(^$$|Petsc)" | \ 442 sed "s/_$$//" | sort > /tmp/countfortranfunctions 443 444countcfunctions: 445 -@ grep extern ${PETSC_DIR}/include/*.h *.h | grep "(" | tr -s ' ' | \ 446 cut -d'(' -f1 | cut -d' ' -f3 | grep -v "\*" | tr -s '\012' | \ 447 tr 'A-Z' 'a-z' | sort > /tmp/countcfunctions 448 449difffortranfunctions: countfortranfunctions countcfunctions 450 -@echo -------------- Functions missing in the fortran interface --------------------- 451 -@${DIFF} /tmp/countcfunctions /tmp/countfortranfunctions | grep "^<" | cut -d' ' -f2 452 -@echo ----------------- Functions missing in the C interface ------------------------ 453 -@${DIFF} /tmp/countcfunctions /tmp/countfortranfunctions | grep "^>" | cut -d' ' -f2 454 -@${RM} /tmp/countcfunctions /tmp/countfortranfunctions 455 456checkbadfortranstubs: 457 -@echo "=========================================" 458 -@echo "Functions with MPI_Comm as an Argument" 459 -@echo "=========================================" 460 -@cd ${PETSC_DIR}/src/fortran/auto; grep '^void' *.c | grep 'MPI_Comm' | \ 461 tr -s ' ' | tr -s ':' ' ' |cut -d'(' -f1 | cut -d' ' -f1,3 462 -@echo "=========================================" 463 -@echo "Functions with a String as an Argument" 464 -@echo "=========================================" 465 -@cd ${PETSC_DIR}/src/fortran/auto; grep '^void' *.c | grep 'char \*' | \ 466 tr -s ' ' | tr -s ':' ' ' |cut -d'(' -f1 | cut -d' ' -f1,3 467 -@echo "=========================================" 468 -@echo "Functions with Pointers to PETSc Objects as Argument" 469 -@echo "=========================================" 470 -@cd ${PETSC_DIR}/src/fortran/auto; \ 471 _p_OBJ=`grep _p_ ${PETSC_DIR}/include/*.h | tr -s ' ' | \ 472 cut -d' ' -f 3 | tr -s '\012' | grep -v '{' | cut -d'*' -f1 | \ 473 sed "s/_p_//g" | tr -s '\012 ' ' *|' ` ; \ 474 for OBJ in $$_p_OBJ; do \ 475 grep "$$OBJ \*" *.c | tr -s ' ' | tr -s ':' ' ' | \ 476 cut -d'(' -f1 | cut -d' ' -f1,3; \ 477 done 478# 479# Automatically generates PETSc exercises in html from the tutorial examples. 480# 481# The introduction for each section is obtained from docs/manualpages/header_${MANSEC} is under RCS and may be edited 482# (used also in introductions to the manual pages) 483# The overall introduction is in docs/exercises/introduction.html and is under RCS and may be edited 484# The list of exercises is from TUTORIALS in each directory's makefile 485# 486# DO NOT EDIT the pageform.txt or *.htm files generated since they will be automatically replaced. 487# The pagemaker rule is in the file conf (at the bottom) 488# 489# Eventually the line below will replace the two cd in the rule below, it is just this way now for speed 490# -@${OMAKE} PETSC_DIR=${PETSC_DIR} pagemaker 491# 492exercises: 493 -@echo "=========================================" 494 -@echo "Generating HTML tutorial exercises" 495 -@${RM} docs/pageform.txt 496 -@echo "title=\"PETSc Exercises\"" > docs/pageform.txt 497 -@echo "access_title=Exercise Sections" >> docs/pageform.txt 498 -@echo "access_format=short" >> docs/pageform.txt 499 -@echo "startpage=../exercises/introduction.htm" >> docs/pageform.txt 500 -@echo "NONE title=\"Introduction\" command=link src=../exercises/introduction.htm" >> docs/pageform.txt 501 -@echo "Generating HTML for individual directories" 502 -@echo "=========================================" 503 -@${OMAKE} PETSC_DIR=${PETSC_DIR} ACTION=pagemaker tree 504 -@echo "Completed HTML for individual directories" 505 -@echo "NONE title=\"<HR>\" " >> docs/pageform.txt; 506 -@echo "NONE title=\"PETSc Documentation\" command=link src=../index.html target=replace" >> docs/pageform.txt 507 /home/MPI/class/mpiexmpl/maint/makepage.new -pageform=docs/pageform.txt -access_extra=/dev/null -outdir=docs/exercises 508 -@echo "=========================================" 509 510.PHONY: info info_h all all_build build testexamples testfortran testexamples_uni testfortran_uni ranlib deletelibs allclean update chk_petsc_dir \ 511 alletags etags etags_complete etags_noexamples etags_makefiles etags_examples etags_fexamples alldoc allmanualpages \ 512 allhtml allcleanhtml allci allco allrcslabel alladicignore alladic alladiclib countfortranfunctions \ 513 start_configure configure_petsc configure_clean 514 515getsigs: 516 -@if [ ! -d src/sigs ]; then mkdir -p sigs; fi 517 -@echo ${PETSC_INCLUDE} > sigs/petsc_include 518 -@echo "#include \"petscvec.h\"" > sigs/vec.sigs.h 519 -@grep -h "enum " include/petscsys.h include/petscvec.h >> sigs/vec.sigs.h 520 -@grep " Vec[a-zA-Z][a-zA-Z]*(Vec," include/petscvec.h | grep EXTERN | grep -v "(\*)" | grep -v IS |grep -v VecType | sed "s/EXTERN PetscErrorCode PETSCVEC_DLLEXPORT//g" >> sigs/vec.sigs.h 521 -@echo "#include \"petscmat.h\"" > sigs/mat.sigs.h 522 -@grep "enum " include/petscmat.h | grep } >> sigs/mat.sigs.h 523 -@grep " Mat[a-zA-Z][a-zA-Z]*(Mat," include/petscmat.h | grep EXTERN | grep -v "(\*)" | grep -v IS |grep -v MatType | sed "s/EXTERN PetscErrorCode PETSCMAT_DLLEXPORT//g" >> sigs/mat.sigs.h 524 -@echo "#include \"petscpc.h\"" > sigs/pc.sigs.h 525 -@grep "enum " include/petscpc.h | grep } >> sigs/pc.sigs.h 526 -@grep " PC[a-zA-Z][a-zA-Z]*(PC," include/petscpc.h | grep EXTERN | grep -v "(\*)" | grep -v "(\*\*)" | grep -v IS |grep -v PCType | sed "s/EXTERN PetscErrorCode PETSCKSP_DLLEXPORT//g" >> sigs/pc.sigs.h 527 -@echo "#include \"petscksp.h\"" > sigs/ksp.sigs.h 528 -@grep "enum " include/petscksp.h | grep } >> sigs/ksp.sigs.h 529 -@grep " KSP[a-zA-Z][a-zA-Z]*(KSP," include/petscksp.h | grep EXTERN | grep -v "(\*)" | grep -v "(\*\*)" | grep -v IS |grep -v KSPType | sed "s/EXTERN PetscErrorCode PETSCKSP_DLLEXPORT//g" >> sigs/ksp.sigs.h 530 -@echo "#include \"petscsnes.h\"" > sigs/snes.sigs.h 531 -@grep " SNES[a-zA-Z][a-zA-Z]*(SNES," include/petscsnes.h | grep EXTERN | grep -v "(\*)" | grep -v "(\*\*)" | grep -v IS |grep -v SNESType | sed "s/EXTERN PetscErrorCode PETSCSNES_DLLEXPORT//g" >> sigs/snes.sigs.h 532 533 534 535 536 537 538 539 540 541 542 543petscao : petscmat petscao.f90.h 544petscda : petscksp petscda.f90.h 545petscdraw : petsc petscdraw.f90.h 546petscis : petsc petscis.f90.h 547petscksp : petscpc petscksp.f90.h 548petsclog : petsc petsclog.f90.h 549petscmat : petscvec petscmat.f90.h 550petscmg : petscksp petscmg.f90.h 551petscpc : petscmat petscpc.f90.h 552petscsnes : petscksp petscsnes.f90.h 553petscsys : petsc petscsys.f90.h 554petscts : petscsnes petscts.f90.h 555petsc : petsc.f90.h 556petscvec : petscis petscvec.f90.h 557petscviewer : petsc petscviewer.f90.h 558modules : petscao petscda petscdraw petscis petscksp petsclog petscmat petscmg petscpc petscsnes petscsys petscts petsc petscvec petscviewer 559