1# 2# This is the makefile for compiling PETSc. See 3# http://www.mcs.anl.gov/petsc/documentation/installation.html for directions on installing PETSc. 4# See also conf for additional commands. 5# 6ALL: all 7LOCDIR = ./ 8DIRS = src include tutorials lua 9CFLAGS = 10FFLAGS = 11CPPFLAGS = 12FPPFLAGS = 13 14# next line defines PETSC_DIR and PETSC_ARCH if they are not set 15include ././${PETSC_ARCH}/conf/petscvariables 16include ${PETSC_DIR}/conf/variables 17include ${PETSC_DIR}/conf/rules 18include ${PETSC_DIR}/conf/test 19 20# 21# Basic targets to build PETSc libraries. 22# all: builds the c, fortran, and f90 libraries 23all: chk_makej 24 @${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} chk_petscdir chk_upgrade | tee ${PETSC_ARCH}/conf/make.log 25 @ln -sf ${PETSC_ARCH}/conf/make.log make.log 26 @if [ "${PETSC_BUILD_USING_CMAKE}" != "" ]; then \ 27 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} all-cmake-local 2>&1 | tee -a ${PETSC_ARCH}/conf/make.log \ 28 | egrep -v '( --check-build-system |cmake -E | -o CMakeFiles/petsc[[:lower:]]*.dir/| -o lib/libpetsc|CMakeFiles/petsc[[:lower:]]*\.dir/(build|depend|requires)|-f CMakeFiles/Makefile2|Dependee .* is newer than depender |provides\.build. is up to date)'; \ 29 else \ 30 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} all-legacy-local 2>&1 | tee -a ${PETSC_ARCH}/conf/make.log \ 31 | ${GREP} -v "has no symbols"; \ 32 fi 33 @egrep -i "( error | error: |no such file or directory)" ${PETSC_ARCH}/conf/make.log | tee ${PETSC_ARCH}/conf/error.log > /dev/null 34 @if test -s ${PETSC_ARCH}/conf/error.log; then \ 35 printf ${PETSC_TEXT_HILIGHT}"**************************ERROR************************************\n" 2>&1 | tee -a ${PETSC_ARCH}/conf/make.log; \ 36 echo " Error during compile, check ${PETSC_ARCH}/conf/make.log" 2>&1 | tee -a ${PETSC_ARCH}/conf/make.log; \ 37 echo " Send it and ${PETSC_ARCH}/conf/configure.log to petsc-maint@mcs.anl.gov" 2>&1 | tee -a ${PETSC_ARCH}/conf/make.log;\ 38 printf "********************************************************************"${PETSC_TEXT_NORMAL}"\n" 2>&1 | tee -a ${PETSC_ARCH}/conf/make.log;\ 39 else \ 40 ${OMAKE} shared_install PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} 2>&1 | tee -a ${PETSC_ARCH}/conf/make.log ;\ 41 fi #solaris make likes to print the whole command that gave error. So split this up into the smallest chunk below 42 @if test -s ${PETSC_ARCH}/conf/error.log; then exit 1; fi 43 44all-cmake: 45 @if [ "${PETSC_BUILD_USING_CMAKE}" != "" ]; then \ 46 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} all;\ 47 else printf ${PETSC_TEXT_HILIGHT}"Build not configured for CMAKE. Quiting"${PETSC_TEXT_NORMAL}"\n"; exit 1; fi 48 49all-legacy: 50 @${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} PETSC_BUILD_USING_CMAKE="" all 51 52all-cmake-local: chk_makej info cmakegen cmake 53 54all-legacy-local: chk_makej chklib_dir info deletelibs deletemods build shared_nomesg mpi4py petsc4py 55# 56# Prints information about the system and version of PETSc being compiled 57# 58info: chk_makej 59 -@echo "==========================================" 60 -@echo " " 61 -@echo "See documentation/faq.html and documentation/bugreporting.html" 62 -@echo "for help with installation problems. Please send EVERYTHING" 63 -@echo "printed out below when reporting problems" 64 -@echo " " 65 -@echo "To subscribe to the PETSc announcement list, send mail to " 66 -@echo "majordomo@mcs.anl.gov with the message: " 67 -@echo "subscribe petsc-announce" 68 -@echo " " 69 -@echo "To subscribe to the PETSc users mailing list, send mail to " 70 -@echo "majordomo@mcs.anl.gov with the message: " 71 -@echo "subscribe petsc-users" 72 -@echo " " 73 -@echo "==========================================" 74 -@echo On `date` on `hostname` 75 -@echo Machine characteristics: `uname -a` 76 -@echo "-----------------------------------------" 77 -@echo "Using PETSc directory: ${PETSC_DIR}" 78 -@echo "Using PETSc arch: ${PETSC_ARCH}" 79 -@echo "-----------------------------------------" 80 -@grep "define PETSC_VERSION" ${PETSC_DIR}/include/petscversion.h | ${SED} "s/........//" 81 -@echo "-----------------------------------------" 82 -@echo "Using configure Options: ${CONFIGURE_OPTIONS}" 83 -@echo "Using configuration flags:" 84 -@grep "\#define " ${PETSC_DIR}/${PETSC_ARCH}/include/petscconf.h 85 -@echo "-----------------------------------------" 86 -@echo "Using C/C++ compile: ${PETSC_COMPILE}" 87 -@if [ "${PETSC_LANGUAGE}" = "CONLY" -a "${MPICC_SHOW}" != "" ]; then \ 88 printf "mpicc -show: %b\n" "${MPICC_SHOW}"; \ 89 elif [ "${PETSC_LANGUAGE}" = "CXXONLY" -a "${MPICXX_SHOW}" != "" ]; then \ 90 printf "mpicxx -show: %b\n" "${MPICXX_SHOW}"; \ 91 fi; 92 -@if [ "${FC}" != "" ]; then \ 93 echo "Using Fortran compile: ${PETSC_FCOMPILE}";\ 94 if [ "${MPIFC_SHOW}" != "" ]; then \ 95 printf "mpif90 -show: %b\n" "${MPIFC_SHOW}"; \ 96 fi; \ 97 fi 98 -@if [ "${CUDAC}" != "" ]; then \ 99 echo "Using CUDA compile: ${PETSC_CUCOMPILE}";\ 100 fi 101 -@echo "-----------------------------------------" 102 -@echo "Using C/C++ linker: ${PCC_LINKER}" 103 -@echo "Using C/C++ flags: ${PCC_LINKER_FLAGS}" 104 -@if [ "${FC}" != "" ]; then \ 105 echo "Using Fortran linker: ${FC_LINKER}";\ 106 echo "Using Fortran flags: ${FC_LINKER_FLAGS}";\ 107 fi 108 -@echo "-----------------------------------------" 109 -@echo "Using libraries: ${PETSC_LIB}" 110 -@echo "------------------------------------------" 111 -@echo "Using mpiexec: ${MPIEXEC}" 112 -@echo "==========================================" 113 114# 115# Builds the PETSc libraries 116# This target also builds fortran77 and f90 interface 117# files and compiles .F files 118# 119build: chk_makej 120 -@echo "BEGINNING TO COMPILE LIBRARIES IN ALL DIRECTORIES" 121 -@echo "=========================================" 122 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=libfast tree 123 -@${RANLIB} ${PETSC_LIB_DIR}/*.${AR_LIB_SUFFIX} > tmpf 2>&1 ; ${GREP} -v "has no symbols" tmpf; ${RM} tmpf; 124 -@echo "Completed building libraries" 125 -@echo "=========================================" 126# 127# 128# Builds PETSc test examples for a given architecture 129# 130check: test 131test: 132 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} test_build 2>&1 | tee ./${PETSC_ARCH}/conf/test.log 133testx: 134 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testx_build 2>&1 | tee ./${PETSC_ARCH}/conf/testx.log 135test_build: 136 -@echo "Running test examples to verify correct installation" 137 -@echo "Using PETSC_DIR=${PETSC_DIR} and PETSC_ARCH=${PETSC_ARCH}" 138 @cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 139 @cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testex19 140 @if [ "${FC}" != "" ]; then \ 141 egrep "^#define PETSC_USE_FORTRAN_DATATYPES 1" ${PETSC_DIR}/${PETSC_ARCH}/include/petscconf.h | tee .ftn-dtype.log > /dev/null; \ 142 if test -s .ftn-dtype.log; then F90TEST="testex5f90t"; else F90TEST="testex5f"; fi; ${RM} .ftn-dtype.log; \ 143 cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} $${F90TEST}; \ 144 fi; 145 @cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 146 -@echo "Completed test examples" 147testx_build: 148 -@echo "Running graphics test example to verify correct X11 installation" 149 -@echo "Using PETSC_DIR=${PETSC_DIR} and PETSC_ARCH=${PETSC_ARCH}" 150 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 151 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testxex19 152 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 153 -@echo "Completed graphics test example" 154 155testexamples: info 156 -@echo "BEGINNING TO COMPILE AND RUN TEST EXAMPLES" 157 -@echo "Due to different numerical round-off on certain" 158 -@echo "machines some of the numbers may not match exactly." 159 -@echo "=========================================" 160 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=testexamples_C tree 161 -@echo "Completed compiling and running test examples" 162 -@echo "=========================================" 163testfortran: info 164 -@echo "BEGINNING TO COMPILE AND RUN FORTRAN TEST EXAMPLES" 165 -@echo "=========================================" 166 -@echo "Due to different numerical round-off on certain" 167 -@echo "machines or the way Fortran formats numbers" 168 -@echo "some of the results may not match exactly." 169 -@echo "=========================================" 170 -@if [ "${FC}" != "" ]; then \ 171 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=testexamples_Fortran tree; \ 172 echo "Completed compiling and running Fortran test examples"; \ 173 else \ 174 echo "Error: No FORTRAN compiler available"; \ 175 fi 176 -@echo "=========================================" 177testexamples_uni: info 178 -@echo "BEGINNING TO COMPILE AND RUN TEST UNI-PROCESSOR EXAMPLES" 179 -@echo "Due to different numerical round-off on certain" 180 -@echo "machines some of the numbers may not match exactly." 181 -@echo "=========================================" 182 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=testexamples_C_X_MPIUni tree 183 -@echo "Completed compiling and running uniprocessor test examples" 184 -@echo "=========================================" 185testfortran_uni: info 186 -@echo "BEGINNING TO COMPILE AND RUN TEST UNI-PROCESSOR FORTRAN EXAMPLES" 187 -@echo "Due to different numerical round-off on certain" 188 -@echo "machines some of the numbers may not match exactly." 189 -@echo "=========================================" 190 -@if [ "${FC}" != "" ]; then \ 191 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=testexamples_Fortran_MPIUni tree; \ 192 echo "Completed compiling and running uniprocessor fortran test examples"; \ 193 else \ 194 echo "Error: No FORTRAN compiler available"; \ 195 fi 196 -@ 197 -@echo "=========================================" 198 199# Ranlib on the libraries 200ranlib: 201 ${RANLIB} ${PETSC_LIB_DIR}/*.${AR_LIB_SUFFIX} 202 203# Deletes PETSc libraries 204deletelibs: chk_makej 205 -${RM} -rf ${PETSC_LIB_DIR}/libpetsc*.* 206deletemods: chk_makej 207 -${RM} -f ${PETSC_DIR}/${PETSC_ARCH}/include/petsc*.mod 208 209# Cleans up build 210allclean: deletelibs deletemods 211 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=clean tree 212# 213reconfigure: 214 @${PYTHON} ${PETSC_ARCH}/conf/reconfigure-${PETSC_ARCH}.py 215# 216install: 217 @${PYTHON} ./config/install.py -destDir=${DESTDIR} 218 219newall: 220 -@cd src/sys; @${PYTHON} ${PETSC_DIR}/config/builder.py 221 -@cd src/vec; @${PYTHON} ${PETSC_DIR}/config/builder.py 222 -@cd src/mat; @${PYTHON} ${PETSC_DIR}/config/builder.py 223 -@cd src/dm; @${PYTHON} ${PETSC_DIR}/config/builder.py 224 -@cd src/ksp; @${PYTHON} ${PETSC_DIR}/config/builder.py 225 -@cd src/snes; @${PYTHON} ${PETSC_DIR}/config/builder.py 226 -@cd src/ts; @${PYTHON} ${PETSC_DIR}/config/builder.py 227 228streams: 229 cd src/benchmarks/streams; ${OMAKE} test 230# ------------------------------------------------------------------ 231# 232# All remaining actions are intended for PETSc developers only. 233# PETSc users should not generally need to use these commands. 234# 235# See the users manual for how the tags files may be used from Emacs and Vi/Vim 236# 237alletags: 238 -@${PYTHON} bin/maint/generateetags.py 239 -@find config -type f -name "*.py" |grep -v SCCS | xargs etags -o TAGS_PYTHON 240 241# obtain gtags from http://www.gnu.org/s/global/ 242allgtags: 243 -@find -E ${PETSC_DIR}/{include,src,bin} -regex '(.*makefile|.*\.(cc|hh|cpp|C|hpp|c|h|cu|m)$$)' | grep -v ftn-auto | gtags -f - 244 245allfortranstubs: 246 -@${RM} -rf include/finclude/ftn-auto/*-tmpdir 247 -@${PYTHON} bin/maint/generatefortranstubs.py ${BFORT} ${VERBOSE} 248 -@${PYTHON} bin/maint/generatefortranstubs.py -merge ${VERBOSE} 249 -@${RM} -rf include/finclude/ftn-auto/*-tmpdir 250deletefortranstubs: 251 -@find . -type d -name ftn-auto | xargs rm -rf 252cmakegen: 253 -@${PYTHON} config/cmakegen.py 254# 255# These are here for the target allci and allco, and etags 256# 257 258BMAKEFILES = conf/variables conf/rules conf/test 259SCRIPTS = bin/maint/builddist bin/maint/wwwman bin/maint/xclude bin/maint/bugReport.py bin/maint/buildconfigtest bin/maint/builddistlite \ 260 bin/maint/buildtest bin/maint/checkBuilds.py bin/maint/copylognightly bin/maint/copylognightly.tao bin/maint/countfiles bin/maint/findbadfiles \ 261 bin/maint/fixinclude bin/maint/getexlist bin/maint/getpdflabels.py bin/maint/helpindex.py bin/maint/hosts.local bin/maint/hosts.solaris \ 262 bin/maint/lex.py bin/maint/mapnameslatex.py bin/maint/startnightly bin/maint/startnightly.tao bin/maint/submitPatch.py \ 263 bin/maint/update-docs.py bin/maint/wwwindex.py bin/maint/xcludebackup bin/maint/xcludecblas bin/maint/zap bin/maint/zapall \ 264 config/PETSc/Configure.py config/PETSc/Options.py \ 265 config/PETSc/packages/*.py config/PETSc/utilities/*.py 266 267 268# Builds all the documentation - should be done every night 269alldoc: alldoc1 alldoc2 alldoc3 docsetdate 270 271# Build everything that goes into 'doc' dir except html sources 272alldoc1: chk_loc deletemanualpages chk_concepts_dir 273 -${PYTHON} bin/maint/countpetsccits.py 274 -${OMAKE} ACTION=manualpages_buildcite tree_basic LOC=${LOC} 275 -@sed -e s%man+../%man+manualpages/% ${LOC}/docs/manualpages/manualpages.cit > ${LOC}/docs/manualpages/htmlmap 276 -@cat ${PETSC_DIR}/src/docs/mpi.www.index >> ${LOC}/docs/manualpages/htmlmap 277 -cd src/docs/tex/manual; ${OMAKE} manual.pdf LOC=${LOC} 278 -cd src/docs/tex/manual; ${OMAKE} developers.pdf LOC=${LOC} 279 -${OMAKE} ACTION=manualpages tree_basic LOC=${LOC} 280 -${PYTHON} bin/maint/wwwindex.py ${PETSC_DIR} ${LOC} 281 -${OMAKE} ACTION=manexamples tree_basic LOC=${LOC} 282 -${OMAKE} manconcepts LOC=${LOC} 283 -${OMAKE} ACTION=getexlist tree_basic LOC=${LOC} 284 -${OMAKE} ACTION=exampleconcepts tree_basic LOC=${LOC} 285 -${PYTHON} bin/maint/helpindex.py ${PETSC_DIR} ${LOC} 286 287# Builds .html versions of the source 288# html overwrites some stuff created by update-docs - hence this is done later. 289alldoc2: chk_loc 290 -${OMAKE} ACTION=html PETSC_DIR=${PETSC_DIR} alltree LOC=${LOC} 291 -${PYTHON} bin/maint/update-docs.py ${PETSC_DIR} ${LOC} 292# 293# Builds HTML versions of Matlab scripts 294alldoc3: chk_loc 295 if [ "${MATLAB_COMMAND}" != "" ]; then\ 296 export MATLABPATH=${MATLABPATH}:${PETSC_DIR}/bin/matlab; \ 297 cd ${PETSC_DIR}/bin/matlab; ${MATLAB_COMMAND} -nodisplay -nodesktop -r "generatehtml;exit" ; \ 298 cd classes; ${MATLAB_COMMAND} -nodisplay -nodesktop -r "generatehtml;exit" ; \ 299 cd examples/tutorials; ${MATLAB_COMMAND} -nodisplay -nodesktop -r "generatehtml;exit" ; \ 300 fi 301 302# modify all generated html files and add in version number, date, canonical URL info. 303docsetdate: chk_petscdir 304 @echo "Updating generated html files with petsc version, date, canonical URL info";\ 305 version_release=`grep '^#define PETSC_VERSION_RELEASE ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 306 version_major=`grep '^#define PETSC_VERSION_MAJOR ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 307 version_minor=`grep '^#define PETSC_VERSION_MINOR ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 308 version_patch=`grep '^#define PETSC_VERSION_PATCH ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 309 if [ $${version_release} = 0 ]; then \ 310 petscversion=petsc-dev; \ 311 export petscversion; \ 312 elif [ $${version_release} = 1 ]; then \ 313 petscversion=petsc-$${version_major}.$${version_minor}-p$${version_patch}; \ 314 export petscversion; \ 315 else \ 316 echo "Unknown PETSC_VERSION_RELEASE: $${version_release}"; \ 317 exit; \ 318 fi; \ 319 datestr=`git log -1 --pretty=format:%ci | cut -d ' ' -f 1`; \ 320 export datestr; \ 321 find * -type d -wholename src/docs/website -prune -o -type d -wholename src/benchmarks/results -prune -o \ 322 -type d -wholename config/BuildSystem/docs/website -prune -o -type d -wholename include/web -prune -o \ 323 -type d -wholename 'arch-*' -prune -o -type d -wholename src/tops -prune -o -type d -wholename externalpackages -prune -o \ 324 -type f -wholename tutorials/multiphysics/tutorial.html -prune -o -type f -name \*.html \ 325 -exec perl -pi -e 's^(<body.*>)^$$1\n <div id=\"version\" align=right><b>$$ENV{petscversion} $$ENV{datestr}</b></div>^i' {} \; \ 326 -exec perl -pi -e 's^(<head>)^$$1 <link rel="canonical" href="http://www.mcs.anl.gov/petsc/petsc-current/{}" />^i' {} \; ; \ 327 echo "Done fixing version number, date, canonical URL info" 328 329alldocclean: deletemanualpages allcleanhtml 330 331# Deletes man pages (HTML version) 332deletemanualpages: chk_loc 333 -@if [ -d ${LOC} -a -d ${LOC}/docs/manualpages ]; then \ 334 find ${LOC}/docs/manualpages -type f -name "*.html" -exec ${RM} {} \; ;\ 335 ${RM} ${LOC}/docs/exampleconcepts ;\ 336 ${RM} ${LOC}/docs/manconcepts ;\ 337 ${RM} ${LOC}/docs/manualpages/manualpages.cit ;\ 338 ${PYTHON} bin/maint/update-docs.py ${PETSC_DIR} ${LOC} clean;\ 339 fi 340 341allcleanhtml: 342 -${OMAKE} ACTION=cleanhtml PETSC_DIR=${PETSC_DIR} alltree 343 344chk_concepts_dir: chk_loc 345 @if [ ! -d "${LOC}/docs/manualpages/concepts" ]; then \ 346 echo Making directory ${LOC}/docs/manualpages/concepts for library; ${MKDIR} ${LOC}/docs/manualpages/concepts; fi 347 348########################################################### 349# targets to build distribution and update docs 350########################################################### 351 352# Creates ${HOME}/petsc.tar.gz [and petsc-lite.tar.gz] 353dist: 354 ${PETSC_DIR}/bin/maint/builddist ${PETSC_DIR} master 355 356# This target works only if you can do 'ssh petsc@login.mcs.anl.gov' 357# also copy the file over to ftp site. 358web-snapshot: 359 @if [ ! -f "${HOME}/petsc-dev.tar.gz" ]; then \ 360 echo "~/petsc-dev.tar.gz missing! cannot update petsc-dev snapshot on mcs-web-site"; \ 361 else \ 362 echo "updating petsc-dev snapshot on mcs-web-site"; \ 363 tmpdir=`mktemp -d -t petsc-doc.XXXXXXXX`; \ 364 cd $${tmpdir}; tar -xzf ${HOME}/petsc-dev.tar.gz; \ 365 /usr/bin/rsync -e ssh -az --delete $${tmpdir}/petsc-dev/ \ 366 petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc/petsc-dev ;\ 367 /bin/cp -f /home/petsc/petsc-dev.tar.gz /mcs/ftp/pub/petsc/petsc-dev.tar.gz;\ 368 ${RM} -rf $${tmpdir} ;\ 369 fi 370 371# build the tarfile - and then update petsc-dev snapshot on mcs-web-site 372update-web-snapshot: dist web-snapshot 373 374# This target updates website main pages 375update-web: 376 @cd ${PETSC_DIR}/src/docs; make PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} bib2html; \ 377 /usr/bin/rsync -az -C --exclude=documentation/index.html \ 378 --exclude=documentation/installation.html --exclude=download/index.html \ 379 ${PETSC_DIR}/src/docs/website/ petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc 380 @cd ${PETSC_DIR}/docs; /usr/bin/rsync -az developers.pdf petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc/developers/ 381 @cd ${PETSC_DIR}/src/docs/tex; /usr/bin/rsync -az petscapp.bib petsc.bib petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc/publications 382 383# 384# builds a single list of files for each PETSc library so they may all be built in parallel 385# without a recursive set of make calls 386createfastbuild: 387 cd src/vec; ${RM} -f files; /bin/echo -n "SOURCEC = " > files; make tree ACTION=sourcelist BASE_DIR=${PETSC_DIR}/src/vec 388 389########################################################### 390# 391# See script for details 392# 393gcov: 394 -@${PETSC_DIR}/bin/maint/gcov.py -run_gcov 395 396mergegcov: 397 -@${PETSC_DIR}/bin/maint/gcov.py -merge_gcov ${LOC} *.tar.gz 398 399# usage make allrcslabel NEW_RCS_LABEL=v_2_0_28 400allrcslabel: 401 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} NEW_RCS_LABEL=${NEW_RCS_LABEL} ACTION=rcslabel alltree 402# 403# ------------------------------------------------------------------------------- 404# 405# Some macros to check if the fortran interface is up-to-date. 406# 407countfortranfunctions: 408 -@cd ${PETSC_DIR}/src/fortran; egrep '^void' custom/*.c auto/*.c | \ 409 cut -d'(' -f1 | tr -s ' ' | cut -d' ' -f2 | uniq | egrep -v "(^$$|Petsc)" | \ 410 sed "s/_$$//" | sort > /tmp/countfortranfunctions 411 412countcfunctions: 413 -@grep extern ${PETSC_DIR}/include/*.h | grep "(" | tr -s ' ' | \ 414 cut -d'(' -f1 | cut -d' ' -f3 | grep -v "\*" | tr -s '\012' | \ 415 tr 'A-Z' 'a-z' | sort > /tmp/countcfunctions 416 417difffortranfunctions: countfortranfunctions countcfunctions 418 -@echo -------------- Functions missing in the fortran interface --------------------- 419 -@${DIFF} /tmp/countcfunctions /tmp/countfortranfunctions | grep "^<" | cut -d' ' -f2 420 -@echo ----------------- Functions missing in the C interface ------------------------ 421 -@${DIFF} /tmp/countcfunctions /tmp/countfortranfunctions | grep "^>" | cut -d' ' -f2 422 -@${RM} /tmp/countcfunctions /tmp/countfortranfunctions 423 424checkbadfortranstubs: 425 -@echo "=========================================" 426 -@echo "Functions with MPI_Comm as an Argument" 427 -@echo "=========================================" 428 -@cd ${PETSC_DIR}/src/fortran/auto; grep '^void' *.c | grep 'MPI_Comm' | \ 429 tr -s ' ' | tr -s ':' ' ' |cut -d'(' -f1 | cut -d' ' -f1,3 430 -@echo "=========================================" 431 -@echo "Functions with a String as an Argument" 432 -@echo "=========================================" 433 -@cd ${PETSC_DIR}/src/fortran/auto; grep '^void' *.c | grep 'char \*' | \ 434 tr -s ' ' | tr -s ':' ' ' |cut -d'(' -f1 | cut -d' ' -f1,3 435 -@echo "=========================================" 436 -@echo "Functions with Pointers to PETSc Objects as Argument" 437 -@echo "=========================================" 438 -@cd ${PETSC_DIR}/src/fortran/auto; \ 439 _p_OBJ=`grep _p_ ${PETSC_DIR}/include/*.h | tr -s ' ' | \ 440 cut -d' ' -f 3 | tr -s '\012' | grep -v '{' | cut -d'*' -f1 | \ 441 sed "s/_p_//g" | tr -s '\012 ' ' *|' ` ; \ 442 for OBJ in $$_p_OBJ; do \ 443 grep "$$OBJ \*" *.c | tr -s ' ' | tr -s ':' ' ' | \ 444 cut -d'(' -f1 | cut -d' ' -f1,3; \ 445 done 446# 447# Automatically generates PETSc exercises in html from the tutorial examples. 448# 449# The introduction for each section is obtained from docs/manualpages/header_${MANSEC} is under RCS and may be edited 450# (used also in introductions to the manual pages) 451# The overall introduction is in docs/exercises/introduction.html and is under RCS and may be edited 452# The list of exercises is from TUTORIALS in each directory's makefile 453# 454# DO NOT EDIT the pageform.txt or *.htm files generated since they will be automatically replaced. 455# The pagemaker rule is in the file conf (at the bottom) 456# 457# Eventually the line below will replace the two cd in the rule below, it is just this way now for speed 458# -@${OMAKE} PETSC_DIR=${PETSC_DIR} pagemaker 459# 460exercises: 461 -@echo "=========================================" 462 -@echo "Generating HTML tutorial exercises" 463 -@${RM} docs/pageform.txt 464 -@echo "title=\"PETSc Exercises\"" > docs/pageform.txt 465 -@echo "access_title=Exercise Sections" >> docs/pageform.txt 466 -@echo "access_format=short" >> docs/pageform.txt 467 -@echo "startpage=../exercises/introduction.htm" >> docs/pageform.txt 468 -@echo "NONE title=\"Introduction\" command=link src=../exercises/introduction.htm" >> docs/pageform.txt 469 -@echo "Generating HTML for individual directories" 470 -@echo "=========================================" 471 -@${OMAKE} PETSC_DIR=${PETSC_DIR} ACTION=pagemaker tree 472 -@echo "Completed HTML for individual directories" 473 -@echo "NONE title=\"<HR>\" " >> docs/pageform.txt; 474 -@echo "NONE title=\"PETSc Documentation\" command=link src=../index.html target=replace" >> docs/pageform.txt 475 /home/MPI/class/mpiexmpl/maint/makepage.new -pageform=docs/pageform.txt -access_extra=/dev/null -outdir=docs/exercises 476 -@echo "=========================================" 477 478.PHONY: info info_h all build testexamples testfortran testexamples_uni testfortran_uni ranlib deletelibs allclean update \ 479 alletags etags etags_complete etags_noexamples etags_makefiles etags_examples etags_fexamples alldoc allmanualpages \ 480 allhtml allcleanhtml allci allco allrcslabel countfortranfunctions \ 481 start_configure configure_petsc configure_clean 482 483petscao : petscmat petscao.f90.h 484petscdm : petscksp petscdm.f90.h 485petscdraw : petsc petscdraw.f90.h 486petscis : petsc petscis.f90.h 487petscksp : petscpc petscksp.f90.h 488petsclog : petsc petsclog.f90.h 489petscmat : petscvec petscmat.f90.h 490petscmg : petscksp petscmg.f90.h 491petscpc : petscmat petscpc.f90.h 492petscsnes : petscksp petscsnes.f90.h 493petscsys : petsc petscsys.f90.h 494petscts : petscsnes petscts.f90.h 495petsc : petsc.f90.h 496petscvec : petscis petscvec.f90.h 497petscviewer : petsc petscviewer.f90.h 498petscmesh : petsc petscmesh.f90.h 499modules : petscao petscdm petscdraw petscis petscksp petsclog petscmat petscmg petscpc petscsnes petscsys petscts petsc petscvec petscviewer petscmesh 500