1 2# 3# This is the makefile for compiling PETSc. See 4# http://www.mcs.anl.gov/petsc/petsc-as/documentation/installation.html for directions on installing PETSc. 5# See also conf for additional commands. 6# 7ALL: all 8LOCDIR = ./ 9DIRS = src include tutorials 10CFLAGS = 11FFLAGS = 12 13include ${PETSC_DIR}/conf/base 14include ${PETSC_DIR}/conf/test 15 16# 17# Basic targets to build PETSc libraries. 18# all: builds the c, fortran, and f90 libraries 19all: 20 @${OMAKE} PETSC_ARCH=${PETSC_ARCH} chkpetsc_dir 21 -@${OMAKE} all_build 2>&1 | tee ${PETSC_ARCH}/conf/make.log 22 -@if [ -L make.log ]; then ${RM} make.log; fi; ln -s ${PETSC_ARCH}/conf/make.log make.log 23 -@egrep -i "( error | error:)" ${PETSC_ARCH}/conf/make.log > /dev/null; if [ "$$?" = "0" ]; then \ 24 echo "********************************************************************" 2>&1 | tee -a ${PETSC_ARCH}/conf/make.log; \ 25 echo " Error during compile, check ${PETSC_ARCH}/conf/make.log" 2>&1 | tee -a ${PETSC_ARCH}/conf/make.log; \ 26 echo " Send it and ${PETSC_ARCH}/conf/configure.log to petsc-maint@mcs.anl.gov" 2>&1 | tee -a ${PETSC_ARCH}/conf/make.log;\ 27 echo "********************************************************************" 2>&1 | tee -a ${PETSC_ARCH}/conf/make.log; \ 28 exit 1; \ 29 else \ 30 ${OMAKE} shared_install 2>&1 | tee -a ${PETSC_ARCH}/conf/make.log ;\ 31 fi 32 33# 34# Notes: the shared_nomesg and petsc4py should NOT be built if --prefix was used 35# the rules for shared_nomesg_noinstall petsc4py_noinstall are generated automatically 36# by config/PETSc/Configure.py and config/PETSc/packages/petsc4py.py based on the existance 37all_build: chk_petsc_dir chklib_dir info info_h deletelibs deletemods build shared_nomesg_noinstall mpi4py_noinstall petsc4py_noinstall 38# 39# Prints information about the system and version of PETSc being compiled 40# 41info: 42 -@echo "==========================================" 43 -@echo " " 44 -@echo "See documentation/faq.html and documentation/bugreporting.html" 45 -@echo "for help with installation problems. Please send EVERYTHING" 46 -@echo "printed out below when reporting problems" 47 -@echo " " 48 -@echo "To subscribe to the PETSc announcement list, send mail to " 49 -@echo "majordomo@mcs.anl.gov with the message: " 50 -@echo "subscribe petsc-announce" 51 -@echo " " 52 -@echo "To subscribe to the PETSc users mailing list, send mail to " 53 -@echo "majordomo@mcs.anl.gov with the message: " 54 -@echo "subscribe petsc-users" 55 -@echo " " 56 -@echo "==========================================" 57 -@echo On `date` on `hostname` 58 -@echo Machine characteristics: `uname -a` 59 -@echo "-----------------------------------------" 60 -@echo "Using PETSc directory: ${PETSC_DIR}" 61 -@echo "Using PETSc arch: ${PETSC_ARCH}" 62 -@echo "-----------------------------------------" 63 -@grep "define PETSC_VERSION" ${PETSC_DIR}/include/petscversion.h | ${SED} "s/........//" 64 -@echo "-----------------------------------------" 65 -@echo "Using configure Options: ${CONFIGURE_OPTIONS}" 66 -@echo "Using configuration flags:" 67 -@grep "\#define " ${PETSC_DIR}/${PETSC_ARCH}/include/petscconf.h 68 -@echo "-----------------------------------------" 69 -@echo "Using include paths: ${PETSC_INCLUDE}" 70 -@echo "------------------------------------------" 71 -@echo "Using C/C++ compiler: ${PCC} ${PCC_FLAGS} ${COPTFLAGS} ${CFLAGS}" 72 -@echo "C/C++ Compiler version: " `${CCV}` 73 -@if [ "${FC}" != "" ]; then \ 74 echo "Using Fortran compiler: ${FC} ${FC_FLAGS} ${FFLAGS} ${FPP_FLAGS}";\ 75 echo "Fortran Compiler version: " `${FCV}`;\ 76 fi 77 -@echo "-----------------------------------------" 78 -@echo "Using C/C++ linker: ${PCC_LINKER}" 79 -@echo "Using C/C++ flags: ${PCC_LINKER_FLAGS}" 80 -@if [ "${FC}" != "" ]; then \ 81 echo "Using Fortran linker: ${FC_LINKER}";\ 82 echo "Using Fortran flags: ${FC_LINKER_FLAGS}";\ 83 fi 84 -@echo "-----------------------------------------" 85 -@echo "Using libraries: ${PETSC_LIB}" 86 -@echo "------------------------------------------" 87 -@echo "Using mpiexec: ${MPIEXEC}" 88 -@echo "==========================================" 89# 90# 91MINFO = ${PETSC_DIR}/${PETSC_ARCH}/include/petscmachineinfo.h 92info_h: 93 -@$(RM) -f ${MINFO} MINFO 94 -@echo "static const char *petscmachineinfo = \"\__n__\"" >> MINFO 95 -@echo "\"-----------------------------------------\__n__\"" >> MINFO 96 -@if [ -f /usr/bin/cygcheck.exe ]; then \ 97 echo "\"Libraries compiled on `date` on `hostname|/usr/bin/dos2unix` \__n__\"" >> MINFO; \ 98 else \ 99 echo "\"Libraries compiled on `date` on `hostname` \__n__\"" >> MINFO; \ 100 fi 101 -@echo "\"Machine characteristics: `uname -a` \__n__\"" >> MINFO 102 -@echo "\"Using PETSc directory: ${PETSC_DIR}\__n__\"" >> MINFO 103 -@echo "\"Using PETSc arch: ${PETSC_ARCH}\__n__\"" >> MINFO 104 -@echo "\"-----------------------------------------\"; " >> MINFO 105 -@echo "static const char *petsccompilerinfo = \"\__n__\"" >> MINFO 106 -@echo "\"Using C compiler: ${PCC} ${PCC_FLAGS} ${COPTFLAGS} ${CFLAGS}\__n__\"" >> MINFO 107 -@echo "\"Using Fortran compiler: ${FC} ${FC_FLAGS} ${FFLAGS} ${FPP_FLAGS}\__n__\"" >> MINFO 108 -@echo "\"-----------------------------------------\"; " >> MINFO 109 -@echo "static const char *petsccompilerflagsinfo = \"\__n__\"" >> MINFO 110 -@echo "\"Using include paths: ${PETSC_INCLUDE}\__n__\"" >> MINFO 111 -@echo "\"------------------------------------------\"; " >> MINFO 112 -@echo "static const char *petsclinkerinfo = \"\__n__\"" >> MINFO 113 -@echo "\"Using C linker: ${CLINKER}\__n__\"" >> MINFO 114 -@echo "\"Using Fortran linker: ${FLINKER}\__n__\"" >> MINFO 115 -@echo "\"Using libraries: ${PETSC_LIB} \__n__\"" >> MINFO 116 -@echo "\"------------------------------------------\"; " >> MINFO 117 -@cat MINFO | ${SED} -e 's/\\ /\\\\ /g' | ${SED} -e 's/__n__/n/g' > ${MINFO} 118 -@ if [ -f /usr/bin/cygcheck.exe ]; then /usr/bin/dos2unix ${MINFO} 2> /dev/null; fi 119 -@$(RM) -f MINFO 120 121# 122# Builds the PETSc libraries 123# This target also builds fortran77 and f90 interface 124# files and compiles .F files 125# 126build: 127 -@echo "BEGINNING TO COMPILE LIBRARIES IN ALL DIRECTORIES" 128 -@echo "=========================================" 129 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=libfast tree 130 -@${RANLIB} ${PETSC_LIB_DIR}/*.${AR_LIB_SUFFIX} > tmpf 2>&1 ; ${GREP} -v "has no symbols" tmpf; ${RM} tmpf; 131 -@echo "Completed building libraries" 132 -@echo "=========================================" 133# 134# 135# Builds PETSc test examples for a given architecture 136# 137test: 138 -@${OMAKE} test_build 2>&1 | tee ${PETSC_DIR}/${PETSC_ARCH}/conf/test.log 139testx11: 140 -@${OMAKE} testx11_build 2>&1 | tee ${PETSC_DIR}/${PETSC_ARCH}/conf/testx11.log 141test_build: 142 -@echo "Running test examples to verify correct installation" 143 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 144 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testex19 145 @if [ "${FC}" != "" ]; then cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testex5f; fi; 146 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 147 -@echo "Completed test examples" 148testx11_build: 149 -@echo "Running graphics test example to verify correct X11 installation" 150 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 151 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testx11ex19 152 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 153 -@echo "Completed graphics test example" 154 155testexamples: info 156 -@echo "BEGINNING TO COMPILE AND RUN TEST EXAMPLES" 157 -@echo "Due to different numerical round-off on certain" 158 -@echo "machines some of the numbers may not match exactly." 159 -@echo "=========================================" 160 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=testexamples_C tree 161 -@echo "Completed compiling and running test examples" 162 -@echo "=========================================" 163testfortran: info 164 -@echo "BEGINNING TO COMPILE AND RUN FORTRAN TEST EXAMPLES" 165 -@echo "=========================================" 166 -@echo "Due to different numerical round-off on certain" 167 -@echo "machines or the way Fortran formats numbers" 168 -@echo "some of the results may not match exactly." 169 -@echo "=========================================" 170 -@if [ "${FC}" != "" ]; then \ 171 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=testexamples_Fortran tree; \ 172 echo "Completed compiling and running Fortran test examples"; \ 173 else \ 174 echo "Error: No FORTRAN compiler available"; \ 175 fi 176 -@echo "=========================================" 177testexamples_uni: info 178 -@echo "BEGINNING TO COMPILE AND RUN TEST UNI-PROCESSOR EXAMPLES" 179 -@echo "Due to different numerical round-off on certain" 180 -@echo "machines some of the numbers may not match exactly." 181 -@echo "=========================================" 182 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=testexamples_C_X11_MPIUni tree 183 -@echo "Completed compiling and running uniprocessor test examples" 184 -@echo "=========================================" 185testfortran_uni: info 186 -@echo "BEGINNING TO COMPILE AND RUN TEST UNI-PROCESSOR FORTRAN EXAMPLES" 187 -@echo "Due to different numerical round-off on certain" 188 -@echo "machines some of the numbers may not match exactly." 189 -@echo "=========================================" 190 -@if [ "${FC}" != "" ]; then \ 191 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=testexamples_Fortran_MPIUni tree; \ 192 echo "Completed compiling and running uniprocessor fortran test examples"; \ 193 else \ 194 echo "Error: No FORTRAN compiler available"; \ 195 fi 196 -@ 197 -@echo "=========================================" 198 199# Ranlib on the libraries 200ranlib: 201 ${RANLIB} ${PETSC_LIB_DIR}/*.${AR_LIB_SUFFIX} 202 203# Deletes PETSc libraries 204deletelibs: 205 -${RM} -f ${PETSC_LIB_DIR}/libpetsc*.* 206deletemods: 207 -${RM} -f ${PETSC_DIR}/${PETSC_ARCH}/include/petsc*.mod 208 209# Cleans up build 210allclean: deletelibs deletemods 211 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=clean tree 212 213 214# 215# Check if PETSC_DIR variable specified is valid 216# 217chk_petsc_dir: 218 @if [ ! -f ${PETSC_DIR}/include/petscversion.h ]; then \ 219 echo "Incorrect PETSC_DIR specified: ${PETSC_DIR}!"; \ 220 echo "You need to use / to separate directories, not \\!"; \ 221 echo "Aborting build"; \ 222 false; fi 223# 224# 225install: 226 -@./config/install.py 227 228newall: 229 -@cd src/sys; ${PETSC_DIR}/config/builder.py 230 -@cd src/vec; ${PETSC_DIR}/config/builder.py 231 -@cd src/mat; ${PETSC_DIR}/config/builder.py 232 -@cd src/dm; ${PETSC_DIR}/config/builder.py 233 -@cd src/ksp; ${PETSC_DIR}/config/builder.py 234 -@cd src/snes; ${PETSC_DIR}/config/builder.py 235 -@cd src/ts; ${PETSC_DIR}/config/builder.py 236# ------------------------------------------------------------------ 237# 238# All remaining actions are intended for PETSc developers only. 239# PETSc users should not generally need to use these commands. 240# 241 242# To access the tags in EMACS, type M-x visit-tags-table and specify 243# the file petsc/TAGS. 244# 1) To move to where a PETSc function is defined, enter M-. and the 245# function name. 246# 2) To search for a string and move to the first occurrence, 247# use M-x tags-search and the string. 248# To locate later occurrences, use M-, 249# Builds all etags files 250alletags: 251 -@bin/maint/generateetags.py 252 -@find config -type f -name "*.py" |grep -v SCCS | xargs etags -o TAGS_PYTHON 253 254allfortranstubs: 255 -@bin/maint/generatefortranstubs.py ${BFORT} 256deletefortranstubs: 257 -@find . -type d -name ftn-auto | xargs rm -rf 258# 259# These are here for the target allci and allco, and etags 260# 261 262BMAKEFILES = conf/base conf/test bmake/adic.init bmake/adicmf.init 263SCRIPTS = bin/maint/builddist bin/maint/wwwman bin/maint/xclude bin/maint/bugReport.py bin/maint/buildconfigtest bin/maint/builddistlite \ 264 bin/maint/buildtest bin/maint/checkBuilds.py bin/maint/copylognightly bin/maint/copylognightly.tao bin/maint/countfiles bin/maint/findbadfiles \ 265 bin/maint/fixinclude bin/maint/getexlist bin/maint/getpdflabels.py bin/maint/helpindex.py bin/maint/hosts.local bin/maint/hosts.solaris \ 266 bin/maint/lex.py bin/maint/mapnameslatex.py bin/maint/startnightly bin/maint/startnightly.tao bin/maint/submitPatch.py \ 267 bin/maint/update-docs.py bin/maint/wwwindex.py bin/maint/xcludebackup bin/maint/xcludecblas bin/maint/zap bin/maint/zapall \ 268 config/PETSc/Configure.py config/PETSc/Options.py \ 269 config/PETSc/packages/*.py config/PETSc/utilities/*.py 270 271 272# Builds all the documentation - should be done every night 273alldoc: alldoc1 alldoc2 274 275# Build everything that goes into 'doc' dir except html sources 276alldoc1: chk_loc deletemanualpages chk_concepts_dir 277 -${OMAKE} ACTION=manualpages_buildcite tree_basic LOC=${LOC} 278 -@sed -e s%man+../%man+manualpages/% ${LOC}/docs/manualpages/manualpages.cit > ${LOC}/docs/manualpages/htmlmap 279 -@cat ${PETSC_DIR}/src/docs/mpi.www.index >> ${LOC}/docs/manualpages/htmlmap 280 -cd src/docs/tex/manual; ${OMAKE} manual.pdf LOC=${LOC} 281 -${OMAKE} ACTION=manualpages tree_basic LOC=${LOC} 282 -bin/maint/wwwindex.py ${PETSC_DIR} ${LOC} 283 -${OMAKE} ACTION=manexamples tree_basic LOC=${LOC} 284 -${OMAKE} manconcepts LOC=${LOC} 285 -${OMAKE} ACTION=getexlist tree_basic LOC=${LOC} 286 -${OMAKE} ACTION=exampleconcepts tree_basic LOC=${LOC} 287 -bin/maint/helpindex.py ${PETSC_DIR} ${LOC} 288 -grep -h Polymorphic include/*.h | grep -v '#define ' | sed "s?PetscPolymorphic[a-zA-Z]*(??g" | cut -f1 -d"{" > tmppoly 289 -bin/maint/processpoly.py ${PETSC_DIR} ${LOC} 290 -${RM} tmppoly 291 292# Builds .html versions of the source 293# html overwrites some stuff created by update-docs - hence this is done later. 294alldoc2: chk_loc 295 -${OMAKE} ACTION=html PETSC_DIR=${PETSC_DIR} alltree LOC=${LOC} 296 -bin/maint/update-docs.py ${PETSC_DIR} ${LOC} 297 298alldocclean: deletemanualpages allcleanhtml 299 300# Deletes man pages (HTML version) 301deletemanualpages: chk_loc 302 -@if [ -d ${LOC} -a -d ${LOC}/docs/manualpages ]; then \ 303 find ${LOC}/docs/manualpages -type f -name "*.html" -exec ${RM} {} \; ;\ 304 ${RM} ${LOC}/docs/exampleconcepts ;\ 305 ${RM} ${LOC}/docs/manconcepts ;\ 306 ${RM} ${LOC}/docs/manualpages/manualpages.cit ;\ 307 bin/maint/update-docs.py ${PETSC_DIR} ${LOC} clean;\ 308 fi 309 310allcleanhtml: 311 -${RM} include/adic/*.h.html 312 -${OMAKE} ACTION=cleanhtml PETSC_DIR=${PETSC_DIR} alltree 313 314chk_concepts_dir: chk_loc 315 @if [ ! -d "${LOC}/docs/manualpages/concepts" ]; then \ 316 echo Making directory ${LOC}/docs/manualpages/concepts for library; ${MKDIR} ${LOC}/docs/manualpages/concepts; fi 317 318########################################################### 319# targets to build distribution and update docs 320########################################################### 321 322# Creates ${HOME}/petsc.tar.gz [and petsc-lite.tar.gz] 323dist: 324 ${PETSC_DIR}/bin/maint/builddist ${PETSC_DIR} 325 326# This target works only if you can do 'ssh petsc@harley.mcs.anl.gov' 327# also copy the file over to ftp site. 328web-snapshot: 329 @if [ ! -f "${HOME}/petsc-dev.tar.gz" ]; then \ 330 echo "~/petsc-dev.tar.gz missing! cannot update petsc-dev snapshot on mcs-web-site"; \ 331 else \ 332 echo "updating petsc-dev snapshot on mcs-web-site"; \ 333 tmpdir=`mktemp -d -t petsc-doc.XXXXXXXX`; \ 334 cd $${tmpdir}; tar -xzf ${HOME}/petsc-dev.tar.gz; \ 335 /usr/bin/rsync -e ssh -az --delete $${tmpdir}/petsc-dev/ \ 336 petsc@harley.mcs.anl.gov:/mcs/web/research/projects/petsc/petsc-as/snapshots/petsc-dev ;\ 337 /bin/cp -f /home/petsc/petsc-dev.tar.gz /mcs/ftp/pub/petsc/petsc-dev.tar.gz;\ 338 ${RM} -rf $${tmpdir} ;\ 339 fi 340 341# build the tarfile - and then update petsc-dev snapshot on mcs-web-site 342update-web-snapshot: dist web-snapshot 343 344# This target updates website main pages 345update-web: 346 @cd ${PETSC_DIR}/src/docs; make PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} bib2html; \ 347 /usr/bin/rsync -az -C --exclude=BitKeeper --exclude=documentation/installation.html \ 348 ${PETSC_DIR}/src/docs/website/ petsc@harley.mcs.anl.gov:/mcs/web/research/projects/petsc/petsc-as 349 @cd ${PETSC_DIR}/src/docs/tex/manual; make developers.pdf PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} LOC=${PETSC_DIR}; \ 350 /usr/bin/rsync -az developers.pdf petsc@harley.mcs.anl.gov:/mcs/web/research/projects/petsc/petsc-as/developers/ 351 352# 353# builds a single list of files for each PETSc library so they may all be built in parallel 354# without a recursive set of make calls 355createfastbuild: 356 cd src/vec; ${RM} -f files; /bin/echo -n "SOURCEC = " > files; make tree ACTION=sourcelist BASE_DIR=${PETSC_DIR}/src/vec; /bin/echo -n "OBJSC = $${SOURCEC:.c=.o} " >> files 357 358########################################################### 359 360# 361# makes .lines files for all source code 362# 363allgcov: 364 -@${RM} -rf /tmp/gcov-${USER} 365 -@mkdir /tmp/gcov-${USER} 366 -${OMAKE} ACTION=gcov PETSC_DIR=${PETSC_DIR} tree 367 -cd /tmp/gcov-${USER}; tar -czf ${PETSC_DIR}/gcov.tar.gz *.lines 368 -${RM) -rf /tmp/gcov-${USER} 369 370# usage make allrcslabel NEW_RCS_LABEL=v_2_0_28 371allrcslabel: 372 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} NEW_RCS_LABEL=${NEW_RCS_LABEL} ACTION=rcslabel alltree 373# 374# The commands below are for generating ADIC versions of the code; 375# they are not currently used. 376# 377alladicignore: 378 -@${RM} ${INSTALL_LIB_DIR}/adicignore 379 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} ACTION=adicignore tree 380 381alladic: 382 -@echo "Beginning to compile ADIC source code in all directories" 383 -@echo "Using ADIC compiler: ${ADIC_CC} ${CCPPFLAGS}" 384 -@echo "=========================================" 385 -@cd include ; \ 386 ${ADIC_CC} -s -f 1 ${CCPPFLAGS} petsc.h 387 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} ACTION=adic tree 388 389alladiclib: 390 -@echo "Beginning to compile ADIC libraries in all directories" 391 -@echo "Using compiler: ${PCC} ${COPTFLAGS}" 392 -@echo "-----------------------------------------" 393 -@echo "Using PETSc flags: ${PETSCFLAGS} ${PCONF}" 394 -@echo "-----------------------------------------" 395 -@echo "Using configuration flags:" 396 -@grep "define " ${PETSC_ARCH}/include/petscconf.h 397 -@echo "-----------------------------------------" 398 -@echo "Using include paths: ${PETSC_INCLUDE}" 399 -@echo "-----------------------------------------" 400 -@echo "Using PETSc directory: ${PETSC_DIR}" 401 -@echo "Using PETSc arch: ${PETSC_ARCH}" 402 -@echo "=========================================" 403 -@${RM} -f ${INSTALL_LIB_DIR}/*adic.${AR_LIB_SUFFIX} 404 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} ACTION=adiclib tree 405 -@cd src/adic/src ; \ 406 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} lib 407 408# ------------------------------------------------------------------------------- 409# 410# Some macros to check if the fortran interface is up-to-date. 411# 412countfortranfunctions: 413 -@cd ${PETSC_DIR}/src/fortran; egrep '^void' custom/*.c auto/*.c | \ 414 cut -d'(' -f1 | tr -s ' ' | cut -d' ' -f2 | uniq | egrep -v "(^$$|Petsc)" | \ 415 sed "s/_$$//" | sort > /tmp/countfortranfunctions 416 417countcfunctions: 418 -@grep extern ${PETSC_DIR}/include/*.h | grep "(" | tr -s ' ' | \ 419 cut -d'(' -f1 | cut -d' ' -f3 | grep -v "\*" | tr -s '\012' | \ 420 tr 'A-Z' 'a-z' | sort > /tmp/countcfunctions 421 422difffortranfunctions: countfortranfunctions countcfunctions 423 -@echo -------------- Functions missing in the fortran interface --------------------- 424 -@${DIFF} /tmp/countcfunctions /tmp/countfortranfunctions | grep "^<" | cut -d' ' -f2 425 -@echo ----------------- Functions missing in the C interface ------------------------ 426 -@${DIFF} /tmp/countcfunctions /tmp/countfortranfunctions | grep "^>" | cut -d' ' -f2 427 -@${RM} /tmp/countcfunctions /tmp/countfortranfunctions 428 429checkbadfortranstubs: 430 -@echo "=========================================" 431 -@echo "Functions with MPI_Comm as an Argument" 432 -@echo "=========================================" 433 -@cd ${PETSC_DIR}/src/fortran/auto; grep '^void' *.c | grep 'MPI_Comm' | \ 434 tr -s ' ' | tr -s ':' ' ' |cut -d'(' -f1 | cut -d' ' -f1,3 435 -@echo "=========================================" 436 -@echo "Functions with a String as an Argument" 437 -@echo "=========================================" 438 -@cd ${PETSC_DIR}/src/fortran/auto; grep '^void' *.c | grep 'char \*' | \ 439 tr -s ' ' | tr -s ':' ' ' |cut -d'(' -f1 | cut -d' ' -f1,3 440 -@echo "=========================================" 441 -@echo "Functions with Pointers to PETSc Objects as Argument" 442 -@echo "=========================================" 443 -@cd ${PETSC_DIR}/src/fortran/auto; \ 444 _p_OBJ=`grep _p_ ${PETSC_DIR}/include/*.h | tr -s ' ' | \ 445 cut -d' ' -f 3 | tr -s '\012' | grep -v '{' | cut -d'*' -f1 | \ 446 sed "s/_p_//g" | tr -s '\012 ' ' *|' ` ; \ 447 for OBJ in $$_p_OBJ; do \ 448 grep "$$OBJ \*" *.c | tr -s ' ' | tr -s ':' ' ' | \ 449 cut -d'(' -f1 | cut -d' ' -f1,3; \ 450 done 451# 452# Automatically generates PETSc exercises in html from the tutorial examples. 453# 454# The introduction for each section is obtained from docs/manualpages/header_${MANSEC} is under RCS and may be edited 455# (used also in introductions to the manual pages) 456# The overall introduction is in docs/exercises/introduction.html and is under RCS and may be edited 457# The list of exercises is from TUTORIALS in each directory's makefile 458# 459# DO NOT EDIT the pageform.txt or *.htm files generated since they will be automatically replaced. 460# The pagemaker rule is in the file conf (at the bottom) 461# 462# Eventually the line below will replace the two cd in the rule below, it is just this way now for speed 463# -@${OMAKE} PETSC_DIR=${PETSC_DIR} pagemaker 464# 465exercises: 466 -@echo "=========================================" 467 -@echo "Generating HTML tutorial exercises" 468 -@${RM} docs/pageform.txt 469 -@echo "title=\"PETSc Exercises\"" > docs/pageform.txt 470 -@echo "access_title=Exercise Sections" >> docs/pageform.txt 471 -@echo "access_format=short" >> docs/pageform.txt 472 -@echo "startpage=../exercises/introduction.htm" >> docs/pageform.txt 473 -@echo "NONE title=\"Introduction\" command=link src=../exercises/introduction.htm" >> docs/pageform.txt 474 -@echo "Generating HTML for individual directories" 475 -@echo "=========================================" 476 -@${OMAKE} PETSC_DIR=${PETSC_DIR} ACTION=pagemaker tree 477 -@echo "Completed HTML for individual directories" 478 -@echo "NONE title=\"<HR>\" " >> docs/pageform.txt; 479 -@echo "NONE title=\"PETSc Documentation\" command=link src=../index.html target=replace" >> docs/pageform.txt 480 /home/MPI/class/mpiexmpl/maint/makepage.new -pageform=docs/pageform.txt -access_extra=/dev/null -outdir=docs/exercises 481 -@echo "=========================================" 482 483.PHONY: info info_h all all_build build testexamples testfortran testexamples_uni testfortran_uni ranlib deletelibs allclean update chk_petsc_dir \ 484 alletags etags etags_complete etags_noexamples etags_makefiles etags_examples etags_fexamples alldoc allmanualpages \ 485 allhtml allcleanhtml allci allco allrcslabel alladicignore alladic alladiclib countfortranfunctions \ 486 start_configure configure_petsc configure_clean 487 488getsigs: 489 -@if [ ! -d src/sigs ]; then mkdir -p sigs; fi 490 -@echo ${PETSC_INCLUDE} > sigs/petsc_include 491 -@echo "#include \"petscvec.h\"" > sigs/vec.sigs.h 492 -@grep -h "enum " include/petscsys.h include/petscvec.h >> sigs/vec.sigs.h 493 -@grep " Vec[a-zA-Z][a-zA-Z]*(Vec," include/petscvec.h | grep EXTERN | grep -v "(\*)" | grep -v IS |grep -v VecType | sed "s/EXTERN PetscErrorCode PETSCVEC_DLLEXPORT//g" >> sigs/vec.sigs.h 494 -@echo "#include \"petscmat.h\"" > sigs/mat.sigs.h 495 -@grep "enum " include/petscmat.h | grep } >> sigs/mat.sigs.h 496 -@grep " Mat[a-zA-Z][a-zA-Z]*(Mat," include/petscmat.h | grep EXTERN | grep -v "(\*)" | grep -v IS |grep -v MatType | sed "s/EXTERN PetscErrorCode PETSCMAT_DLLEXPORT//g" >> sigs/mat.sigs.h 497 -@echo "#include \"petscpc.h\"" > sigs/pc.sigs.h 498 -@grep "enum " include/petscpc.h | grep } >> sigs/pc.sigs.h 499 -@grep " PC[a-zA-Z][a-zA-Z]*(PC," include/petscpc.h | grep EXTERN | grep -v "(\*)" | grep -v "(\*\*)" | grep -v IS |grep -v PCType | sed "s/EXTERN PetscErrorCode PETSCKSP_DLLEXPORT//g" >> sigs/pc.sigs.h 500 -@echo "#include \"petscksp.h\"" > sigs/ksp.sigs.h 501 -@grep "enum " include/petscksp.h | grep } >> sigs/ksp.sigs.h 502 -@grep " KSP[a-zA-Z][a-zA-Z]*(KSP," include/petscksp.h | grep EXTERN | grep -v "(\*)" | grep -v "(\*\*)" | grep -v IS |grep -v KSPType | sed "s/EXTERN PetscErrorCode PETSCKSP_DLLEXPORT//g" >> sigs/ksp.sigs.h 503 -@echo "#include \"petscsnes.h\"" > sigs/snes.sigs.h 504 -@grep " SNES[a-zA-Z][a-zA-Z]*(SNES," include/petscsnes.h | grep EXTERN | grep -v "(\*)" | grep -v "(\*\*)" | grep -v IS |grep -v SNESType | sed "s/EXTERN PetscErrorCode PETSCSNES_DLLEXPORT//g" >> sigs/snes.sigs.h 505 506 507 508 509 510 511 512 513 514 515 516petscao : petscmat petscao.f90.h 517petscda : petscksp petscda.f90.h 518petscdraw : petsc petscdraw.f90.h 519petscis : petsc petscis.f90.h 520petscksp : petscpc petscksp.f90.h 521petsclog : petsc petsclog.f90.h 522petscmat : petscvec petscmat.f90.h 523petscmg : petscksp petscmg.f90.h 524petscpc : petscmat petscpc.f90.h 525petscsnes : petscksp petscsnes.f90.h 526petscsys : petsc petscsys.f90.h 527petscts : petscsnes petscts.f90.h 528petsc : petsc.f90.h 529petscvec : petscis petscvec.f90.h 530petscviewer : petsc petscviewer.f90.h 531petscmesh : petsc petscmesh.f90.h 532modules : petscao petscda petscdraw petscis petscksp petsclog petscmat petscmg petscpc petscsnes petscsys petscts petsc petscvec petscviewer petscmesh 533