1# 2# This is the makefile for compiling PETSc. See 3# http://www.mcs.anl.gov/petsc/documentation/installation.html for directions on installing PETSc. 4# See also conf for additional commands. 5# 6ALL: all 7LOCDIR = ./ 8DIRS = src include tutorials interfaces share/petsc/matlab 9CFLAGS = 10FFLAGS = 11CPPFLAGS = 12FPPFLAGS = 13 14# next line defines PETSC_DIR and PETSC_ARCH if they are not set 15include ././${PETSC_ARCH}/lib/petsc/conf/petscvariables 16include ${PETSC_DIR}/lib/petsc/conf/variables 17include ${PETSC_DIR}/lib/petsc/conf/rules 18include ${PETSC_DIR}/lib/petsc/conf/test.common 19 20# This makefile contains a lot of PHONY targets with improperly specified prerequisites 21# where correct execution instead depends on the targets being processed in the correct 22# order. This is gross, but this makefile doesn't really do any work. Sub-makes still 23# benefit from parallelism. 24.NOTPARALLEL: 25 26# 27# Basic targets to build PETSc libraries. 28# 29all: 30 +@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} chk_petscdir chk_upgrade | tee ${PETSC_ARCH}/lib/petsc/conf/make.log 31 @ln -sf ${PETSC_ARCH}/lib/petsc/conf/make.log make.log 32 +@${OMAKE_PRINTDIR} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} all-local 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log; 33 @egrep -i "( error | error: |no such file or directory)" ${PETSC_ARCH}/lib/petsc/conf/make.log | tee ${PETSC_ARCH}/lib/petsc/conf/error.log > /dev/null 34 +@if test -s ${PETSC_ARCH}/lib/petsc/conf/error.log; then \ 35 printf ${PETSC_TEXT_HILIGHT}"**************************ERROR*************************************\n" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log; \ 36 echo " Error during compile, check ${PETSC_ARCH}/lib/petsc/conf/make.log" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log; \ 37 echo " Send it and ${PETSC_ARCH}/lib/petsc/conf/configure.log to petsc-maint@mcs.anl.gov" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log;\ 38 printf "********************************************************************"${PETSC_TEXT_NORMAL}"\n" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log;\ 39 else \ 40 ${OMAKE} print_mesg_after_build PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log ;\ 41 fi #solaris make likes to print the whole command that gave error. So split this up into the smallest chunk below 42 @echo "Finishing make run at `date +'%a, %d %b %Y %H:%M:%S %z'`" >> ${PETSC_ARCH}/lib/petsc/conf/make.log 43 @if test -s ${PETSC_ARCH}/lib/petsc/conf/error.log; then exit 1; fi 44 45all-local: info libs matlabbin mpi4py-build petsc4py-build libmesh-build slepc-build mfem-build 46 47# 48# Prints information about the system and version of PETSc being compiled 49# 50info: 51 -@echo "==========================================" 52 -@echo " " 53 -@echo "See documentation/faq.html and documentation/bugreporting.html" 54 -@echo "for help with installation problems. Please send EVERYTHING" 55 -@echo "printed out below when reporting problems. Please check the" 56 -@echo "mailing list archives and consider subscribing." 57 -@echo " " 58 -@echo " http://www.mcs.anl.gov/petsc/miscellaneous/mailing-lists.html" 59 -@echo " " 60 -@echo "==========================================" 61 -@echo Starting make run on `hostname` at `date +'%a, %d %b %Y %H:%M:%S %z'` 62 -@echo Machine characteristics: `uname -a` 63 -@echo "-----------------------------------------" 64 -@echo "Using PETSc directory: ${PETSC_DIR}" 65 -@echo "Using PETSc arch: ${PETSC_ARCH}" 66 -@echo "-----------------------------------------" 67 -@grep "define PETSC_VERSION" ${PETSC_DIR}/include/petscversion.h | ${SED} "s/........//" 68 -@echo "-----------------------------------------" 69 -@echo "Using configure Options: ${CONFIGURE_OPTIONS}" 70 -@echo "Using configuration flags:" 71 -@grep "\#define " ${PETSCCONF_H} 72 -@echo "-----------------------------------------" 73 -@echo "Using C compile: ${PETSC_COMPILE}" 74 -@if [ "${MPICC_SHOW}" != "" ]; then \ 75 printf "mpicc -show: %b\n" "${MPICC_SHOW}";\ 76 fi; \ 77 printf "C compiler version: %b\n" "${C_VERSION}"; \ 78 if [ "${CXX}" != "" ]; then \ 79 echo "Using C++ compile: ${PETSC_CXXCOMPILE}";\ 80 if [ "${MPICXX_SHOW}" != "" ]; then \ 81 printf "mpicxx -show: %b\n" "${MPICXX_SHOW}"; \ 82 fi;\ 83 printf "C++ compiler version: %b\n" "${Cxx_VERSION}"; \ 84 fi 85 -@if [ "${FC}" != "" ]; then \ 86 echo "Using Fortran compile: ${PETSC_FCOMPILE}";\ 87 if [ "${MPIFC_SHOW}" != "" ]; then \ 88 printf "mpif90 -show: %b\n" "${MPIFC_SHOW}"; \ 89 fi; \ 90 printf "Fortran compiler version: %b\n" "${FC_VERSION}"; \ 91 fi 92 -@if [ "${CUDAC}" != "" ]; then \ 93 echo "Using CUDA compile: ${PETSC_CUCOMPILE}";\ 94 fi 95 -@echo "-----------------------------------------" 96 -@echo "Using C/C++ linker: ${PCC_LINKER}" 97 -@echo "Using C/C++ flags: ${PCC_LINKER_FLAGS}" 98 -@if [ "${FC}" != "" ]; then \ 99 echo "Using Fortran linker: ${FC_LINKER}";\ 100 echo "Using Fortran flags: ${FC_LINKER_FLAGS}";\ 101 fi 102 -@echo "-----------------------------------------" 103 -@echo "Using system modules: ${LOADEDMODULES}" 104 -@if [ "${MPI_IS_MPIUNI}" = "1" ]; then \ 105 echo Using mpi.h: mpiuni; \ 106 else \ 107 TESTDIR=`mktemp -q -d -t petscmpi-XXXXXXXX` && \ 108 echo '#include <mpi.h>' > $${TESTDIR}/mpitest.c && \ 109 BUF=`${CPP} ${PETSC_CCPPFLAGS} $${TESTDIR}/mpitest.c |grep 'mpi\.h' | ( head -1 ; cat > /dev/null )` && \ 110 echo Using mpi.h: $${BUF}; ${RM} -rf $${TESTDIR}; \ 111 fi 112 -@echo "-----------------------------------------" 113 -@echo "Using libraries: ${PETSC_LIB}" 114 -@echo "------------------------------------------" 115 -@echo "Using mpiexec: ${MPIEXEC}" 116 -@echo "------------------------------------------" 117 -@echo "Using MAKEFLAGS: -j$(MAKE_NP) -l$(MAKE_LOAD) $(MAKEFLAGS)" 118 -@echo "==========================================" 119 120# 121# Build MatLab binaries 122# 123matlabbin: 124 -@if [ "${MATLAB_MEX}" != "" -a "${MATLAB_SOCKET}" != "" -a "${PETSC_SCALAR}" = "real" -a "${PETSC_PRECISION}" = "double" ]; then \ 125 echo "BEGINNING TO COMPILE MATLAB INTERFACE"; \ 126 if [ ! -d "${PETSC_DIR}/${PETSC_ARCH}/lib/petsc" ] ; then ${MKDIR} ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc; fi; \ 127 if [ ! -d "${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/matlab" ] ; then ${MKDIR} ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/matlab; fi; \ 128 cd src/sys/classes/viewer/impls/socket/matlab && ${OMAKE} matlabcodes PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR}; \ 129 echo "========================================="; \ 130 fi 131# 132# Builds PETSc test examples for a given architecture 133# 134test_install: test 135check: test 136test: 137 -+@${OMAKE} PATH="${PETSC_DIR}/${PETSC_ARCH}/lib:${PATH}" PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} test_build 2>&1 | tee ./${PETSC_ARCH}/lib/petsc/conf/test.log 138testx: 139 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testx_build 2>&1 | tee ./${PETSC_ARCH}/lib/petsc/conf/testx.log 140test_build: 141 -@echo "Running test examples to verify correct installation" 142 -@echo "Using PETSC_DIR=${PETSC_DIR} and PETSC_ARCH=${PETSC_ARCH}" 143 +@cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 144 +@cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testex19 145 +@if [ "${HYPRE_LIB}" != "" ] && [ "${PETSC_WITH_BATCH}" = "" ] && [ "${PETSC_SCALAR}" = "real" ]; then \ 146 cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex19_hypre; \ 147 fi; 148 +@if [ "${MUMPS_LIB}" != "" ] && [ "${PETSC_WITH_BATCH}" = "" ]; then \ 149 cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex19_fieldsplit_mumps; \ 150 fi; 151 +@if [ "${SUPERLU_DIST_LIB}" != "" ] && [ "${PETSC_WITH_BATCH}" = "" ]; then \ 152 cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex19_superlu_dist; \ 153 fi; 154 +@if [ "${HDF5_LIB}" != "" ] && [ "${PETSC_WITH_BATCH}" = "" ]; then \ 155 cd src/vec/vec/examples/tests >/dev/null; \ 156 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean; \ 157 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ex47.PETSc DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex47; \ 158 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean; \ 159 fi; 160 +@if ( [ "${ML_LIB}" != "" ] || [ "${TRILINOS_LIB}" != "" ] ) && [ "${PETSC_WITH_BATCH}" = "" ]; then \ 161 cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex19_ml; \ 162 fi; 163 +@cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ex19.rm 164 +@if [ "${PETSC4PY}" = "yes" ]; then \ 165 cd src/ksp/ksp/examples/tutorials >/dev/null; \ 166 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean; \ 167 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testex100; \ 168 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean; \ 169 fi; 170 +@egrep "^#define PETSC_HAVE_FORTRAN 1" ${PETSCCONF_H} | tee .ftn.log > /dev/null; \ 171 if test -s .ftn.log; then \ 172 cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testex5f; \ 173 fi; ${RM} .ftn.log; 174 +@cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 175 -@echo "Completed test examples" 176testx_build: 177 -@echo "Running graphics test example to verify correct X11 installation" 178 -@echo "Using PETSC_DIR=${PETSC_DIR} and PETSC_ARCH=${PETSC_ARCH}" 179 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 180 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testxex19 181 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 182 -@echo "Completed graphics test example" 183test_usermakefile: 184 -@echo "Testing compile with user makefile" 185 -@echo "Using PETSC_DIR=${PETSC_DIR} and PETSC_ARCH=${PETSC_ARCH}" 186 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} -f ${PETSC_DIR}/share/petsc/Makefile.user ex19 187 @egrep "^#define PETSC_HAVE_FORTRAN 1" ${PETSCCONF_H} | tee .ftn.log > /dev/null; \ 188 if test -s .ftn.log; then \ 189 cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} -f ${PETSC_DIR}/share/petsc/Makefile.user ex5f; \ 190 fi; ${RM} .ftn.log; 191 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 192 -@echo "Completed compile with user makefile" 193 194# Compare ABI/API of two versions of PETSc library with the old one defined by PETSC_{DIR,ARCH}_ABI_OLD 195abitest: 196 @if [ "${PETSC_DIR_ABI_OLD}" == "" ] || [ "${PETSC_ARCH_ABI_OLD}" == "" ]; \ 197 then printf "You must set environment variables PETSC_DIR_ABI_OLD and PETSC_ARCH_ABI_OLD to run abitest\n"; \ 198 exit 1; \ 199 fi; 200 -@echo "Comparing ABI/API of the following two PETSc versions (you must have already configured and built them using GCC and with -g):" 201 -@echo "=========================================================================================" 202 -@echo " Old: PETSC_DIR_ABI_OLD = ${PETSC_DIR_ABI_OLD}" 203 -@echo " PETSC_ARCH_ABI_OLD = ${PETSC_ARCH_ABI_OLD}" 204 -@pushd ${PETSC_DIR_ABI_OLD} >> /dev/null ; echo " Branch = "`git rev-parse --abbrev-ref HEAD` 205 -@echo " New: PETSC_DIR = ${PETSC_DIR}" 206 -@echo " PETSC_ARCH = ${PETSC_ARCH}" 207 -@echo " Branch = "`git rev-parse --abbrev-ref HEAD` 208 -@echo "=========================================================================================" 209 -@$(PYTHON) ${PETSC_DIR}/lib/petsc/bin/maint/abicheck.py -old_dir ${PETSC_DIR_ABI_OLD} -old_arch ${PETSC_ARCH_ABI_OLD} -new_dir ${PETSC_DIR} -new_arch ${PETSC_ARCH} -report_format html 210 211# Compare ABI/API of current PETSC_ARCH/PETSC_DIR with a previous branch 212abitestcomplete: 213 -@if [[ -f "${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/conf/configure.log" ]]; then \ 214 OPTIONS=`grep -h -m 1 "Configure Options: " ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/conf/configure.log | sed "s!Configure Options: --configModules=PETSc.Configure --optionsModule=config.compilerOptions!!g"` ;\ 215echo $${OPTIONS} ;\ 216 fi ; \ 217 if [[ "${PETSC_DIR_ABI_OLD}" != "" ]]; then \ 218 PETSC_DIR_OLD=${PETSC_DIR_ABI_OLD}; \ 219 else \ 220 PETSC_DIR_OLD=${PETSC_DIR}/../petsc-abi; \ 221 fi ; \ 222 echo "=================================================================================================" ;\ 223 echo "Doing ABI/API comparison between" ${branch} " and " `git rev-parse --abbrev-ref HEAD` "using " $${OPTIONS} ;\ 224 echo "=================================================================================================" ;\ 225 if [[ ! -d $${PETSC_DIR_OLD} ]]; then \ 226 git clone ${PETSC_DIR} $${PETSC_DIR_OLD} ; \ 227 else \ 228 cd $${PETSC_DIR_OLD} ; \ 229 git pull ; \ 230 fi ; \ 231 cd $${PETSC_DIR_OLD} ; \ 232 git checkout ${branch} ; \ 233 PETSC_DIR=`pwd` PETSC_ARCH=arch-branch-`git rev-parse ${branch}` ./configure $${OPTIONS} ; \ 234 PETSC_DIR=`pwd` PETSC_ARCH=arch-branch-`git rev-parse ${branch}` make all test ; \ 235 cd ${PETSC_DIR} ; \ 236 ./configure $${OPTIONS}; \ 237 make all test ; \ 238 PETSC_DIR_ABI_OLD=$${PETSC_DIR_OLD} PETSC_ARCH_ABI_OLD=arch-branch-`git rev-parse ${branch}` make abitest 239 240# Deletes PETSc libraries 241deletelibs: 242 -${RM} -rf ${PETSC_LIB_DIR}/libpetsc*.* 243deletemods: 244 -${RM} -f ${PETSC_DIR}/${PETSC_ARCH}/include/petsc*.mod 245 246allclean: 247 -@${OMAKE} -f gmakefile clean 248 249clean:: allclean 250 251distclean: chk_petscdir 252 @if [ -f ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/conf/reconfigure-${PETSC_ARCH}.py ]; then \ 253 echo "*** Preserving ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/conf/reconfigure-${PETSC_ARCH}.py in ${PETSC_DIR} ***"; \ 254 mv -f ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/conf/reconfigure-${PETSC_ARCH}.py ${PETSC_DIR}/; fi 255 @echo "*** Deleting all build files in ${PETSC_DIR}/${PETSC_ARCH} ***" 256 -${RM} -rf ${PETSC_DIR}/${PETSC_ARCH}/ 257 258 259# 260reconfigure: 261 @unset MAKEFLAGS && ${PYTHON} ${PETSC_ARCH}/lib/petsc/conf/reconfigure-${PETSC_ARCH}.py 262# 263install: 264 @${PYTHON} ./config/install.py -destDir=${DESTDIR} 265 +${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} mpi4py-install petsc4py-install libmesh-install slepc-install mfem-install 266 267mpistreams: 268 +@cd src/benchmarks/streams; ${OMAKE} PATH="${PETSC_DIR}/${PETSC_ARCH}/lib:${PATH}" PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} mpistreams 269 270mpistream: 271 +@cd src/benchmarks/streams; ${OMAKE} PATH="${PETSC_DIR}/${PETSC_ARCH}/lib:${PATH}" PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} mpistream 272 273openmpstreams: 274 +@cd src/benchmarks/streams; ${OMAKE} PATH="${PETSC_DIR}/${PETSC_ARCH}/lib:${PATH}" PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} openmpstreams 275 276openmpstream: 277 +@cd src/benchmarks/streams; ${OMAKE} PATH="${PETSC_DIR}/${PETSC_ARCH}/lib:${PATH}" PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} openmpstream 278 279# for legacy reasons 280stream: mpistream 281 282streams: mpistreams 283 284# ------------------------------------------------------------------ 285# 286# All remaining actions are intended for PETSc developers only. 287# PETSc users should not generally need to use these commands. 288# 289# See the users manual for how the tags files may be used from Emacs and Vi/Vim 290# 291alletags: 292 -@${PYTHON} lib/petsc/bin/maint/generateetags.py 293 -@find config -type f -name "*.py" |grep -v SCCS | xargs etags -o TAGS_PYTHON 294 295# obtain gtags from http://www.gnu.org/s/global/ 296allgtags: 297 -@find ${PETSC_DIR}/include ${PETSC_DIR}/src ${PETSC_DIR}/bin -regex '\(.*makefile\|.*\.\(cc\|hh\|cpp\|C\|hpp\|c\|h\|cu\|m\)$$\)' | grep -v ftn-auto | gtags -f - 298 299allfortranstubs: 300 -@${RM} -rf ${PETSC_ARCH}/include/petsc/finclude/ftn-auto/*-tmpdir 301 @${PYTHON} lib/petsc/bin/maint/generatefortranstubs.py ${BFORT} ${VERBOSE} 302 -@${PYTHON} lib/petsc/bin/maint/generatefortranstubs.py -merge ${VERBOSE} 303 -@${RM} -rf ${PETSC_ARCH}/include/petsc/finclude/ftn-auto/*-tmpdir 304deletefortranstubs: 305 -@find . -type d -name ftn-auto | xargs rm -rf 306 307# Builds all the documentation - should be done every night 308alldoc: allcite allpdf alldoc1 alldoc2 docsetdate 309 310# Build just citations 311allcite: chk_loc deletemanualpages 312 -${PYTHON} lib/petsc/bin/maint/countpetsccits.py 313 -${OMAKE} ACTION=manualpages_buildcite tree_basic LOC=${LOC} 314 -@sed -e s%man+../%man+manualpages/% ${LOC}/docs/manualpages/manualpages.cit > ${LOC}/docs/manualpages/htmlmap 315 -@cat ${PETSC_DIR}/src/docs/mpi.www.index >> ${LOC}/docs/manualpages/htmlmap 316 317# Build just PDF manuals + prerequisites 318allpdf: chk_loc allcite 319 -cd src/docs/tex/manual; ${OMAKE} manual.pdf LOC=${LOC} 320 -cd src/docs/tex/manual; ${OMAKE} developers.pdf LOC=${LOC} 321 -cd src/docs/tao_tex/manual; ${OMAKE} manual.pdf LOC=${LOC} 322 323# Build just manual pages + prerequisites 324allmanpages: chk_loc allcite 325 -${OMAKE} ACTION=manualpages tree_basic LOC=${LOC} 326 327# Build just manual examples + prerequisites 328allmanexamples: chk_loc allmanpages 329 -${OMAKE} ACTION=manexamples tree_basic LOC=${LOC} 330 331# Build everything that goes into 'doc' dir except html sources 332alldoc1: chk_loc chk_concepts_dir allcite allmanpages allmanexamples 333 -${OMAKE} manimplementations LOC=${LOC} 334 -${PYTHON} lib/petsc/bin/maint/wwwindex.py ${PETSC_DIR} ${LOC} 335 -${OMAKE} ACTION=getexlist tree_basic LOC=${LOC} 336 -${OMAKE} ACTION=exampleconcepts tree_basic LOC=${LOC} 337 -${PYTHON} lib/petsc/bin/maint/helpindex.py ${PETSC_DIR} ${LOC} 338 339# Builds .html versions of the source 340# html overwrites some stuff created by update-docs - hence this is done later. 341alldoc2: chk_loc 342 -${OMAKE} ACTION=html PETSC_DIR=${PETSC_DIR} alltree LOC=${LOC} 343 -${PYTHON} lib/petsc/bin/maint/update-docs.py ${PETSC_DIR} ${LOC} 344# 345# Makes links for all manual pages in $LOC/docs/manualpages/all 346allman: 347 @cd ${LOC}/docs/manualpages; rm -rf all ; mkdir all ; find * -type d -wholename all -prune -o -name index.html -prune -o -type f -name \*.html -exec ln -s -f ../{} all \; 348 349DOCSETDATE_PRUNE_LIST=-o -type f -wholename share/petsc/saws/linearsolveroptions.html -prune -o -type f -wholename tutorials/HandsOnExercise.html -prune -o -type f -wholename tutorials/TAOHandsOnExercise.html -prune 350 351# modify all generated html files and add in version number, date, canonical URL info. 352docsetdate: chk_petscdir 353 @echo "Updating generated html files with petsc version, date, canonical URL info";\ 354 version_release=`grep '^#define PETSC_VERSION_RELEASE ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 355 version_major=`grep '^#define PETSC_VERSION_MAJOR ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 356 version_minor=`grep '^#define PETSC_VERSION_MINOR ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 357 version_subminor=`grep '^#define PETSC_VERSION_SUBMINOR ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 358 if [ $${version_release} = 0 ]; then \ 359 petscversion=petsc-master; \ 360 export petscversion; \ 361 elif [ $${version_release} = 1 ]; then \ 362 petscversion=petsc-$${version_major}.$${version_minor}.$${version_subminor}; \ 363 export petscversion; \ 364 else \ 365 echo "Unknown PETSC_VERSION_RELEASE: $${version_release}"; \ 366 exit; \ 367 fi; \ 368 datestr=`git log -1 --pretty=format:%ci | cut -d ' ' -f 1`; \ 369 export datestr; \ 370 gitver=`git describe --match "v*"`; \ 371 export gitver; \ 372 find * -type d -wholename src/docs/website \ 373 -prune -o -type d -wholename src/benchmarks/results \ 374 -prune -o -type d -wholename config/BuildSystem/docs/website \ 375 -prune -o -type d -wholename include/web \ 376 -prune -o -type d -wholename 'arch-*' \ 377 -prune -o -type d -wholename lib/petsc/bin/maint \ 378 -prune -o -type d -wholename externalpackages \ 379 -prune ${DOCSETDATE_PRUNE_LIST} -o -type f -name \*.html \ 380 -exec perl -pi -e 's^(<body.*>)^$$1\n <div id=\"version\" align=right><b>$$ENV{petscversion} $$ENV{datestr}</b></div>\n <div id="bugreport" align=right><a href="mailto:petsc-maint\@mcs.anl.gov?subject=Typo or Error in Documentation &body=Please describe the typo or error in the documentation: $$ENV{petscversion} $$ENV{gitver} {} "><small>Report Typos and Errors</small></a></div>^i' {} \; \ 381 -exec perl -pi -e 's^(<head>)^$$1 <link rel="canonical" href="http://www.mcs.anl.gov/petsc/petsc-current/{}" />^i' {} \; ; \ 382 echo "Done fixing version number, date, canonical URL info" 383 384alldocclean: deletemanualpages allcleanhtml 385 386# Deletes man pages (HTML version) 387deletemanualpages: chk_loc 388 -@if [ -d ${LOC} -a -d ${LOC}/docs/manualpages ]; then \ 389 find ${LOC}/docs/manualpages -type f -name "*.html" -exec ${RM} {} \; ;\ 390 ${RM} ${LOC}/docs/exampleconcepts ;\ 391 ${RM} ${LOC}/docs/manualpages/manualpages.cit ;\ 392 ${PYTHON} lib/petsc/bin/maint/update-docs.py ${PETSC_DIR} ${LOC} clean;\ 393 fi 394 395allcleanhtml: 396 -${OMAKE} ACTION=cleanhtml PETSC_DIR=${PETSC_DIR} alltree 397 398chk_concepts_dir: chk_loc 399 @if [ ! -d "${LOC}/docs/manualpages/concepts" ]; then \ 400 echo Making directory ${LOC}/docs/manualpages/concepts for library; ${MKDIR} ${LOC}/docs/manualpages/concepts; fi 401 402########################################################### 403# targets to build distribution and update docs 404########################################################### 405 406# Creates ${HOME}/petsc.tar.gz [and petsc-lite.tar.gz] 407dist: 408 ${PETSC_DIR}/lib/petsc/bin/maint/builddist ${PETSC_DIR} master 409 410# This target works only if you can do 'ssh petsc@login.mcs.anl.gov' 411# also copy the file over to ftp site. 412web-snapshot: 413 @if [ ! -f "${HOME}/petsc-master.tar.gz" ]; then \ 414 echo "~/petsc-master.tar.gz missing! cannot update petsc-master snapshot on mcs-web-site"; \ 415 else \ 416 echo "updating petsc-master snapshot on mcs-web-site"; \ 417 tmpdir=`mktemp -d -t petsc-doc.XXXXXXXX`; \ 418 cd $${tmpdir}; tar -xzf ${HOME}/petsc-master.tar.gz; \ 419 /usr/bin/rsync -e ssh -az --delete $${tmpdir}/petsc-master/ \ 420 petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc/petsc-master ;\ 421 /bin/cp -f /home/petsc/petsc-master.tar.gz /mcs/ftp/pub/petsc/petsc-master.tar.gz;\ 422 ${RM} -rf $${tmpdir} ;\ 423 fi 424 425# build the tarfile - and then update petsc-master snapshot on mcs-web-site 426update-web-snapshot: dist web-snapshot 427 428# This target updates website main pages 429update-web: 430 @cd ${PETSC_DIR}/src/docs; make PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} bib2html; \ 431 /usr/bin/rsync -az -C --exclude=documentation/index.html \ 432 --exclude=documentation/installation.html --exclude=download/index.html \ 433 ${PETSC_DIR}/src/docs/website/ petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc 434 @cd ${PETSC_DIR}/docs; /usr/bin/rsync -az developers.pdf petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc/developers/ 435 @cd ${PETSC_DIR}/src/docs/tex; /usr/bin/rsync -az petscapp.bib petsc.bib petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc/publications 436 437########################################################### 438# 439# See script for details 440# 441gcov: 442 -@$(PYTHON) ${PETSC_DIR}/lib/petsc/bin/maint/gcov.py -run_gcov 443 444mergegcov: 445 -@$(PYTHON) ${PETSC_DIR}/lib/petsc/bin/maint/gcov.py -merge_gcov ${LOC} *.tar.gz 446 447######################## 448# 449# Create the include dependency graph (requires graphviz to be available) 450# 451includegraph: 452 -@${PETSC_DIR}/src/contrib/style/include-graph.sh includegraph.pdf 453 -@echo Include dependency graph written to includegraph.pdf 454 455# 456# ------------------------------------------------------------------------------- 457# 458# Some macros to check if the fortran interface is up-to-date. 459# 460countfortranfunctions: 461 -@cd ${PETSC_DIR}/src/fortran; egrep '^void' custom/*.c auto/*.c | \ 462 cut -d'(' -f1 | tr -s ' ' | cut -d' ' -f2 | uniq | egrep -v "(^$$|Petsc)" | \ 463 sed "s/_$$//" | sort > /tmp/countfortranfunctions 464 465countcfunctions: 466 -@grep PETSC_EXTERN ${PETSC_DIR}/include/*.h | grep "(" | tr -s ' ' | \ 467 cut -d'(' -f1 | cut -d' ' -f3 | grep -v "\*" | tr -s '\012' | \ 468 tr 'A-Z' 'a-z' | sort | uniq > /tmp/countcfunctions 469 470difffortranfunctions: countfortranfunctions countcfunctions 471 -@echo -------------- Functions missing in the fortran interface --------------------- 472 -@${DIFF} /tmp/countcfunctions /tmp/countfortranfunctions | grep "^<" | cut -d' ' -f2 473 -@echo ----------------- Functions missing in the C interface ------------------------ 474 -@${DIFF} /tmp/countcfunctions /tmp/countfortranfunctions | grep "^>" | cut -d' ' -f2 475 -@${RM} /tmp/countcfunctions /tmp/countfortranfunctions 476 477checkbadfortranstubs: 478 -@echo "=========================================" 479 -@echo "Functions with MPI_Comm as an Argument" 480 -@echo "=========================================" 481 -@cd ${PETSC_DIR}/src/fortran/auto; grep '^void' *.c | grep 'MPI_Comm' | \ 482 tr -s ' ' | tr -s ':' ' ' |cut -d'(' -f1 | cut -d' ' -f1,3 483 -@echo "=========================================" 484 -@echo "Functions with a String as an Argument" 485 -@echo "=========================================" 486 -@cd ${PETSC_DIR}/src/fortran/auto; grep '^void' *.c | grep 'char \*' | \ 487 tr -s ' ' | tr -s ':' ' ' |cut -d'(' -f1 | cut -d' ' -f1,3 488 -@echo "=========================================" 489 -@echo "Functions with Pointers to PETSc Objects as Argument" 490 -@echo "=========================================" 491 -@cd ${PETSC_DIR}/src/fortran/auto; \ 492 _p_OBJ=`grep _p_ ${PETSC_DIR}/include/*.h | tr -s ' ' | \ 493 cut -d' ' -f 3 | tr -s '\012' | grep -v '{' | cut -d'*' -f1 | \ 494 sed "s/_p_//g" | tr -s '\012 ' ' *|' ` ; \ 495 for OBJ in $$_p_OBJ; do \ 496 grep "$$OBJ \*" *.c | tr -s ' ' | tr -s ':' ' ' | \ 497 cut -d'(' -f1 | cut -d' ' -f1,3; \ 498 done 499 500checkpackagetests: 501 -@echo "Missing package tests" 502 -@cat config/examples/*.py > configexamples; pushd config/BuildSystem/config/packages/; packages=`ls *.py | sed "s/\\.py//g"`;popd; for i in $${packages}; do j=`echo $${i} | tr '[:upper:]' '[:lower:]'`; printf $${j} ; egrep "(with-$${j}|download-$${j})" configexamples | grep -v "=0" | wc -l ; done 503 -@echo "Missing download package tests" 504 -@cat config/examples/*.py > configexamples; pushd config/BuildSystem/config/packages/; packages=`grep -l "download " *.py | sed "s/\\.py//g"`;popd; for i in $${packages}; do j=`echo $${i} | tr '[:upper:]' '[:lower:]'`; printf $${j} ; egrep "(download-$${j})" configexamples | grep -v "=0" | wc -l ; done 505 506.PHONY: info info_h all deletelibs allclean update \ 507 alletags etags etags_complete etags_noexamples etags_makefiles etags_examples etags_fexamples alldoc allmanualpages \ 508 allhtml allcleanhtml countfortranfunctions \ 509 start_configure configure_petsc configure_clean matlabbin install 510