1# 2# This is the makefile for compiling PETSc. See 3# http://www.mcs.anl.gov/petsc/documentation/installation.html for directions on installing PETSc. 4# See also conf for additional commands. 5# 6ALL: all 7LOCDIR = ./ 8DIRS = src include tutorials interfaces 9CFLAGS = 10FFLAGS = 11CPPFLAGS = 12FPPFLAGS = 13 14# next line defines PETSC_DIR and PETSC_ARCH if they are not set 15include ././${PETSC_ARCH}/lib/petsc-conf/petscvariables 16include ${PETSC_DIR}/lib/petsc-conf/variables 17include ${PETSC_DIR}/lib/petsc-conf/rules 18include ${PETSC_DIR}/lib/petsc-conf/test 19 20# 21# Basic targets to build PETSc libraries. 22# all: builds the c, fortran, and f90 libraries 23all: chk_makej 24 @${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} chk_petscdir chk_upgrade | tee ${PETSC_ARCH}/lib/petsc-conf/make.log 25 @ln -sf ${PETSC_ARCH}/lib/petsc-conf/make.log make.log 26 @if [ "${MAKE_IS_GNUMAKE}" != "" ]; then \ 27 ${OMAKE_PRINTDIR} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} all-gnumake-local 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc-conf/make.log; \ 28 elif [ "${PETSC_BUILD_USING_CMAKE}" != "" ]; then \ 29 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} all-cmake-local 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc-conf/make.log \ 30 | egrep -v '( --check-build-system |cmake -E | -o CMakeFiles/petsc[[:lower:]]*.dir/| -o lib/libpetsc|CMakeFiles/petsc[[:lower:]]*\.dir/(build|depend|requires)|-f CMakeFiles/Makefile2|Dependee .* is newer than depender |provides\.build. is up to date)'; \ 31 else \ 32 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} all-legacy-local 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc-conf/make.log \ 33 | ${GREP} -v "has no symbols"; \ 34 fi 35 @egrep -i "( error | error: |no such file or directory)" ${PETSC_ARCH}/lib/petsc-conf/make.log | tee ${PETSC_ARCH}/lib/petsc-conf/error.log > /dev/null 36 @if test -s ${PETSC_ARCH}/lib/petsc-conf/error.log; then \ 37 printf ${PETSC_TEXT_HILIGHT}"**************************ERROR*************************************\n" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc-conf/make.log; \ 38 echo " Error during compile, check ${PETSC_ARCH}/lib/petsc-conf/make.log" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc-conf/make.log; \ 39 echo " Send it and ${PETSC_ARCH}/lib/petsc-conf/configure.log to petsc-maint@mcs.anl.gov" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc-conf/make.log;\ 40 printf "********************************************************************"${PETSC_TEXT_NORMAL}"\n" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc-conf/make.log;\ 41 else \ 42 ${OMAKE} shared_install PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc-conf/make.log ;\ 43 fi #solaris make likes to print the whole command that gave error. So split this up into the smallest chunk below 44 @echo "Finishing at: `date`" >> ${PETSC_ARCH}/lib/petsc-conf/make.log 45 @if test -s ${PETSC_ARCH}/lib/petsc-conf/error.log; then exit 1; fi 46 47all-gnumake: 48 @if [ "${MAKE_IS_GNUMAKE}" != "" ]; then \ 49 ${OMAKE_PRINTDIR} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} PETSC_BUILD_USING_CMAKE="" all;\ 50 else printf ${PETSC_TEXT_HILIGHT}"Build not configured for GNUMAKE. Quiting"${PETSC_TEXT_NORMAL}"\n"; exit 1; fi 51 52all-cmake: 53 @if [ "${PETSC_BUILD_USING_CMAKE}" != "" ]; then \ 54 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} MAKE_IS_GNUMAKE="" all;\ 55 else printf ${PETSC_TEXT_HILIGHT}"Build not configured for CMAKE. Quiting"${PETSC_TEXT_NORMAL}"\n"; exit 1; fi 56 57all-legacy: 58 @${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} PETSC_BUILD_USING_CMAKE="" MAKE_IS_GNUMAKE="" all 59 60all-gnumake-local: chk_makej info gnumake matlabbin mpi4py-build petsc4py-build 61 62all-cmake-local: chk_makej info cmakegen cmake matlabbin mpi4py-build petsc4py-build 63 64all-legacy-local: chk_makej chklib_dir info deletelibs deletemods build matlabbin shared_nomesg mpi4py-build petsc4py-build 65# 66# Prints information about the system and version of PETSc being compiled 67# 68info: chk_makej 69 -@echo "==========================================" 70 -@echo " " 71 -@echo "See documentation/faq.html and documentation/bugreporting.html" 72 -@echo "for help with installation problems. Please send EVERYTHING" 73 -@echo "printed out below when reporting problems. Please check the" 74 -@echo "mailing list archives and consider subscribing." 75 -@echo " " 76 -@echo " http://www.mcs.anl.gov/petsc/miscellaneous/mailing-lists.html" 77 -@echo " " 78 -@echo "==========================================" 79 -@echo Starting on `hostname` at `date` 80 -@echo Machine characteristics: `uname -a` 81 -@echo "-----------------------------------------" 82 -@echo "Using PETSc directory: ${PETSC_DIR}" 83 -@echo "Using PETSc arch: ${PETSC_ARCH}" 84 -@echo "-----------------------------------------" 85 -@grep "define PETSC_VERSION" ${PETSC_DIR}/include/petscversion.h | ${SED} "s/........//" 86 -@echo "-----------------------------------------" 87 -@echo "Using configure Options: ${CONFIGURE_OPTIONS}" 88 -@echo "Using configuration flags:" 89 -@grep "\#define " ${PETSC_DIR}/${PETSC_ARCH}/include/petscconf.h 90 -@echo "-----------------------------------------" 91 -@echo "Using C/C++ compile: ${PETSC_COMPILE}" 92 -@if [ "${PETSC_LANGUAGE}" = "CONLY" -a "${MPICC_SHOW}" != "" ]; then \ 93 printf "mpicc -show: %b\n" "${MPICC_SHOW}"; \ 94 elif [ "${PETSC_LANGUAGE}" = "CXXONLY" -a "${MPICXX_SHOW}" != "" ]; then \ 95 printf "mpicxx -show: %b\n" "${MPICXX_SHOW}"; \ 96 fi; 97 -@if [ "${FC}" != "" ]; then \ 98 echo "Using Fortran compile: ${PETSC_FCOMPILE}";\ 99 if [ "${MPIFC_SHOW}" != "" ]; then \ 100 printf "mpif90 -show: %b\n" "${MPIFC_SHOW}"; \ 101 fi; \ 102 fi 103 -@if [ "${CUDAC}" != "" ]; then \ 104 echo "Using CUDA compile: ${PETSC_CUCOMPILE}";\ 105 fi 106 -@echo "-----------------------------------------" 107 -@echo "Using C/C++ linker: ${PCC_LINKER}" 108 -@echo "Using C/C++ flags: ${PCC_LINKER_FLAGS}" 109 -@if [ "${FC}" != "" ]; then \ 110 echo "Using Fortran linker: ${FC_LINKER}";\ 111 echo "Using Fortran flags: ${FC_LINKER_FLAGS}";\ 112 fi 113 -@echo "-----------------------------------------" 114 -@echo "Using libraries: ${PETSC_LIB}" 115 -@echo "------------------------------------------" 116 -@echo "Using mpiexec: ${MPIEXEC}" 117 -@echo "==========================================" 118 119# 120# Builds the PETSc libraries 121# This target also builds fortran77 and f90 interface 122# files and compiles .F files 123# 124build: chk_makej 125 -@echo "BEGINNING TO COMPILE LIBRARIES IN ALL DIRECTORIES" 126 -@echo "=========================================" 127 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=libfast tree 128 -@${RANLIB} ${PETSC_LIB_DIR}/*.${AR_LIB_SUFFIX} > tmpf 2>&1 ; ${GREP} -v "has no symbols" tmpf; ${RM} tmpf; 129 -@echo "Completed building libraries" 130 -@echo "=========================================" 131# 132# Build MatLab binaries 133# 134matlabbin: 135 -@if [ "${MATLAB_MEX}" != "" -a "${PETSC_SCALAR}" = "real" -a "${PETSC_PRECISION}" = "double" ]; then \ 136 echo "BEGINNING TO COMPILE MATLAB INTERFACE"; \ 137 if [ ! -d "${PETSC_DIR}/${PETSC_ARCH}/lib/petsc" ] ; then ${MKDIR} ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc; fi; \ 138 if [ ! -d "${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/matlab" ] ; then ${MKDIR} ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/matlab; fi; \ 139 cd src/sys/classes/viewer/impls/socket/matlab && ${OMAKE} matlabcodes PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR}; \ 140 echo "========================================="; \ 141 fi 142# 143# Builds PETSc test examples for a given architecture 144# 145check: test 146test: 147 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} test_build 2>&1 | tee ./${PETSC_ARCH}/lib/petsc-conf/test.log 148 -@if [ "${PETSC_WITH_BATCH}" = "" ]; then \ 149 printf "=========================================\n"; \ 150 printf "Now to evaluate the computer systems you plan use - do:\n"; \ 151 printf "make PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} streams NPMAX=<number of MPI processes you intend to use>\n"; \ 152 fi 153testx: 154 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testx_build 2>&1 | tee ./${PETSC_ARCH}/lib/petsc-conf/testx.log 155test_build: 156 -@echo "Running test examples to verify correct installation" 157 -@echo "Using PETSC_DIR=${PETSC_DIR} and PETSC_ARCH=${PETSC_ARCH}" 158 @cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 159 @cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testex19 160 @if [ "${FC}" != "" ]; then \ 161 egrep "^#define PETSC_USE_FORTRAN_DATATYPES 1" ${PETSC_DIR}/${PETSC_ARCH}/include/petscconf.h | tee .ftn-dtype.log > /dev/null; \ 162 if test -s .ftn-dtype.log; then F90TEST="testex5f90t"; else F90TEST="testex5f"; fi; ${RM} .ftn-dtype.log; \ 163 cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} $${F90TEST}; \ 164 fi; 165 @cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 166 -@echo "Completed test examples" 167testx_build: 168 -@echo "Running graphics test example to verify correct X11 installation" 169 -@echo "Using PETSC_DIR=${PETSC_DIR} and PETSC_ARCH=${PETSC_ARCH}" 170 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 171 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testxex19 172 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 173 -@echo "Completed graphics test example" 174 175testexamples: info 176 -@echo "BEGINNING TO COMPILE AND RUN TEST EXAMPLES" 177 -@echo "Due to different numerical round-off on certain" 178 -@echo "machines some of the numbers may not match exactly." 179 -@echo "=========================================" 180 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=testexamples_C tree 181 -@echo "Completed compiling and running test examples" 182 -@echo "=========================================" 183testfortran: info 184 -@echo "BEGINNING TO COMPILE AND RUN FORTRAN TEST EXAMPLES" 185 -@echo "=========================================" 186 -@echo "Due to different numerical round-off on certain" 187 -@echo "machines or the way Fortran formats numbers" 188 -@echo "some of the results may not match exactly." 189 -@echo "=========================================" 190 -@if [ "${FC}" != "" ]; then \ 191 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=testexamples_Fortran tree; \ 192 echo "Completed compiling and running Fortran test examples"; \ 193 else \ 194 echo "Error: No FORTRAN compiler available"; \ 195 fi 196 -@echo "=========================================" 197testexamples_uni: info 198 -@echo "BEGINNING TO COMPILE AND RUN TEST UNI-PROCESSOR EXAMPLES" 199 -@echo "Due to different numerical round-off on certain" 200 -@echo "machines some of the numbers may not match exactly." 201 -@echo "=========================================" 202 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=testexamples_C_X_MPIUni tree 203 -@echo "Completed compiling and running uniprocessor test examples" 204 -@echo "=========================================" 205testfortran_uni: info 206 -@echo "BEGINNING TO COMPILE AND RUN TEST UNI-PROCESSOR FORTRAN EXAMPLES" 207 -@echo "Due to different numerical round-off on certain" 208 -@echo "machines some of the numbers may not match exactly." 209 -@echo "=========================================" 210 -@if [ "${FC}" != "" ]; then \ 211 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=testexamples_Fortran_MPIUni tree; \ 212 echo "Completed compiling and running uniprocessor fortran test examples"; \ 213 else \ 214 echo "Error: No FORTRAN compiler available"; \ 215 fi 216 -@ 217 -@echo "=========================================" 218 219# Ranlib on the libraries 220ranlib: 221 ${RANLIB} ${PETSC_LIB_DIR}/*.${AR_LIB_SUFFIX} 222 223# Deletes PETSc libraries 224deletelibs: chk_makej 225 -${RM} -rf ${PETSC_LIB_DIR}/libpetsc*.* 226deletemods: chk_makej 227 -${RM} -f ${PETSC_DIR}/${PETSC_ARCH}/include/petsc*.mod 228 229# Cleans up build 230allclean-legacy: deletelibs deletemods 231 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=clean-legacy tree 232allclean-cmake: 233 -@cd ${PETSC_ARCH} && ${OMAKE} clean 234allclean-gnumake: 235 -@${OMAKE} -f gmakefile clean 236 237allclean: 238 @if [ "${MAKE_IS_GNUMAKE}" != "" ]; then \ 239 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} allclean-gnumake; \ 240 elif [ "${PETSC_BUILD_USING_CMAKE}" != "" ]; then \ 241 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} allclean-cmake; \ 242 else \ 243 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} allclean-legacy; \ 244 fi 245 246clean:: allclean 247 248distclean: chk_petscdir 249 @if [ -f ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc-conf/reconfigure-${PETSC_ARCH}.py ]; then \ 250 echo "*** Preserving ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc-conf/reconfigure-${PETSC_ARCH}.py in ${PETSC_DIR} ***"; \ 251 mv -f ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc-conf/reconfigure-${PETSC_ARCH}.py ${PETSC_DIR}/; fi 252 @echo "*** Deleting all build files in ${PETSC_DIR}/${PETSC_ARCH} ***" 253 -${RM} -rf ${PETSC_DIR}/${PETSC_ARCH}/ 254 255 256# 257reconfigure: 258 @${PYTHON} ${PETSC_ARCH}/lib/petsc-conf/reconfigure-${PETSC_ARCH}.py 259# 260install: 261 @${PYTHON} ./lib/petsc-conf/install.py -destDir=${DESTDIR} 262 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} mpi4py-install petsc4py-install 263 264newall: 265 -@cd src/sys; @${PYTHON} ${PETSC_DIR}/config/builder.py 266 -@cd src/vec; @${PYTHON} ${PETSC_DIR}/config/builder.py 267 -@cd src/mat; @${PYTHON} ${PETSC_DIR}/config/builder.py 268 -@cd src/dm; @${PYTHON} ${PETSC_DIR}/config/builder.py 269 -@cd src/ksp; @${PYTHON} ${PETSC_DIR}/config/builder.py 270 -@cd src/snes; @${PYTHON} ${PETSC_DIR}/config/builder.py 271 -@cd src/ts; @${PYTHON} ${PETSC_DIR}/config/builder.py 272 273streams: 274 cd src/benchmarks/streams; ${OMAKE} streams 275 276stream: 277 cd src/benchmarks/streams; ${OMAKE} stream 278# ------------------------------------------------------------------ 279# 280# All remaining actions are intended for PETSc developers only. 281# PETSc users should not generally need to use these commands. 282# 283# See the users manual for how the tags files may be used from Emacs and Vi/Vim 284# 285alletags: 286 -@${PYTHON} bin/maint/generateetags.py 287 -@find config -type f -name "*.py" |grep -v SCCS | xargs etags -o TAGS_PYTHON 288 289# obtain gtags from http://www.gnu.org/s/global/ 290allgtags: 291 -@find -E ${PETSC_DIR}/{include,src,bin} -regex '(.*makefile|.*\.(cc|hh|cpp|C|hpp|c|h|cu|m)$$)' | grep -v ftn-auto | gtags -f - 292 293allfortranstubs: 294 -@${RM} -rf include/petsc-finclude/ftn-auto/*-tmpdir 295 -@${PYTHON} bin/maint/generatefortranstubs.py ${BFORT} ${VERBOSE} 296 -@${PYTHON} bin/maint/generatefortranstubs.py -merge ${VERBOSE} 297 -@${RM} -rf include/petsc-finclude/ftn-auto/*-tmpdir 298deletefortranstubs: 299 -@find . -type d -name ftn-auto | xargs rm -rf 300cmakegen: 301 -@${PYTHON} config/cmakegen.py 302# 303# These are here for the target allci and allco, and etags 304# 305 306BMAKEFILES = conf/variables conf/rules conf/test 307SCRIPTS = bin/maint/builddist bin/maint/wwwman bin/maint/xclude bin/maint/bugReport.py bin/maint/buildconfigtest bin/maint/builddistlite \ 308 bin/maint/buildtest bin/maint/checkBuilds.py bin/maint/copylognightly bin/maint/copylognightly.tao bin/maint/countfiles bin/maint/findbadfiles \ 309 bin/maint/fixinclude bin/maint/getexlist bin/maint/getpdflabels.py bin/maint/helpindex.py bin/maint/hosts.local bin/maint/hosts.solaris \ 310 bin/maint/lex.py bin/maint/mapnameslatex.py bin/maint/startnightly bin/maint/startnightly.tao bin/maint/submitPatch.py \ 311 bin/maint/update-docs.py bin/maint/wwwindex.py bin/maint/xcludebackup bin/maint/xcludecblas bin/maint/zap bin/maint/zapall \ 312 config/PETSc/Configure.py config/PETSc/Options.py \ 313 config/PETSc/utilities/*.py 314 315 316# Builds all the documentation - should be done every night 317alldoc: alldoc1 alldoc2 alldoc3 docsetdate 318 319# Build everything that goes into 'doc' dir except html sources 320alldoc1: chk_loc deletemanualpages chk_concepts_dir 321 -${PYTHON} bin/maint/countpetsccits.py 322 -${OMAKE} ACTION=manualpages_buildcite tree_basic LOC=${LOC} 323 -@sed -e s%man+../%man+manualpages/% ${LOC}/docs/manualpages/manualpages.cit > ${LOC}/docs/manualpages/htmlmap 324 -@cat ${PETSC_DIR}/src/docs/mpi.www.index >> ${LOC}/docs/manualpages/htmlmap 325 -cd src/docs/tex/manual; ${OMAKE} manual.pdf LOC=${LOC} 326 -cd src/docs/tex/manual; ${OMAKE} developers.pdf LOC=${LOC} 327 -cd src/docs/tao_tex/manual; ${OMAKE} manual.pdf 328 -${OMAKE} ACTION=manualpages tree_basic LOC=${LOC} 329 -${PYTHON} bin/maint/wwwindex.py ${PETSC_DIR} ${LOC} 330 -${OMAKE} ACTION=manexamples tree_basic LOC=${LOC} 331 -${OMAKE} manconcepts LOC=${LOC} 332 -${OMAKE} ACTION=getexlist tree_basic LOC=${LOC} 333 -${OMAKE} ACTION=exampleconcepts tree_basic LOC=${LOC} 334 -${PYTHON} bin/maint/helpindex.py ${PETSC_DIR} ${LOC} 335 336# Builds .html versions of the source 337# html overwrites some stuff created by update-docs - hence this is done later. 338alldoc2: chk_loc 339 -${OMAKE} ACTION=html PETSC_DIR=${PETSC_DIR} alltree LOC=${LOC} 340 -${PYTHON} bin/maint/update-docs.py ${PETSC_DIR} ${LOC} 341# 342# Builds HTML versions of Matlab scripts 343alldoc3: chk_loc 344 if [ "${MATLAB_COMMAND}" != "" ]; then\ 345 export MATLABPATH=${MATLABPATH}:${PETSC_DIR}/share/petsc/matlab; \ 346 cd ${PETSC_DIR}/share/petsc/matlab; ${MATLAB_COMMAND} -nodisplay -nodesktop -r "generatehtml;exit" ; \ 347 cd classes; ${MATLAB_COMMAND} -nodisplay -nodesktop -r "generatehtml;exit" ; \ 348 cd examples/tutorials; ${MATLAB_COMMAND} -nodisplay -nodesktop -r "generatehtml;exit" ; \ 349 fi 350 351# 352# Makes links for all manual pages in $LOC/docs/manualpages/all 353allman: 354 @cd ${LOC}/docs/manualpages; rm -rf all ; mkdir all ; find * -type d -wholename all -prune -o -name index.html -prune -o -type f -name \*.html -exec ln -s -f ../{} all \; 355 356# modify all generated html files and add in version number, date, canonical URL info. 357docsetdate: chk_petscdir 358 @echo "Updating generated html files with petsc version, date, canonical URL info";\ 359 version_release=`grep '^#define PETSC_VERSION_RELEASE ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 360 version_major=`grep '^#define PETSC_VERSION_MAJOR ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 361 version_minor=`grep '^#define PETSC_VERSION_MINOR ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 362 version_subminor=`grep '^#define PETSC_VERSION_SUBMINOR ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 363 if [ $${version_release} = 0 ]; then \ 364 petscversion=petsc-master; \ 365 export petscversion; \ 366 elif [ $${version_release} = 1 ]; then \ 367 petscversion=petsc-$${version_major}.$${version_minor}.$${version_subminor}; \ 368 export petscversion; \ 369 else \ 370 echo "Unknown PETSC_VERSION_RELEASE: $${version_release}"; \ 371 exit; \ 372 fi; \ 373 datestr=`git log -1 --pretty=format:%ci | cut -d ' ' -f 1`; \ 374 export datestr; \ 375 gitver=`git describe`; \ 376 export gitver; \ 377 find * -type d -wholename src/docs/website -prune -o -type d -wholename src/benchmarks/results -prune -o \ 378 -type d -wholename config/BuildSystem/docs/website -prune -o -type d -wholename include/web -prune -o \ 379 -type d -wholename 'arch-*' -prune -o -type d -wholename src/tops -prune -o -type d -wholename externalpackages -prune -o \ 380 -type f -wholename tutorials/multiphysics/tutorial.html -prune -o -type f -name \*.html \ 381 -exec perl -pi -e 's^(<body.*>)^$$1\n <div id=\"version\" align=right><b>$$ENV{petscversion} $$ENV{datestr}</b></div>\n <div id="bugreport" align=right><a href="mailto:petsc-maint\@mcs.anl.gov?subject=Typo or Error in Documentation &body=Please describe the typo or error in the documentation: $$ENV{petscversion} $$ENV{gitver} {} "><small>Report Typos and Errors</small></a></div>^i' {} \; \ 382 -exec perl -pi -e 's^(<head>)^$$1 <link rel="canonical" href="http://www.mcs.anl.gov/petsc/petsc-current/{}" />^i' {} \; ; \ 383 echo "Done fixing version number, date, canonical URL info" 384 385alldocclean: deletemanualpages allcleanhtml 386 387# Deletes man pages (HTML version) 388deletemanualpages: chk_loc 389 -@if [ -d ${LOC} -a -d ${LOC}/docs/manualpages ]; then \ 390 find ${LOC}/docs/manualpages -type f -name "*.html" -exec ${RM} {} \; ;\ 391 ${RM} ${LOC}/docs/exampleconcepts ;\ 392 ${RM} ${LOC}/docs/manconcepts ;\ 393 ${RM} ${LOC}/docs/manualpages/manualpages.cit ;\ 394 ${PYTHON} bin/maint/update-docs.py ${PETSC_DIR} ${LOC} clean;\ 395 fi 396 397allcleanhtml: 398 -${OMAKE} ACTION=cleanhtml PETSC_DIR=${PETSC_DIR} alltree 399 400chk_concepts_dir: chk_loc 401 @if [ ! -d "${LOC}/docs/manualpages/concepts" ]; then \ 402 echo Making directory ${LOC}/docs/manualpages/concepts for library; ${MKDIR} ${LOC}/docs/manualpages/concepts; fi 403 404########################################################### 405# targets to build distribution and update docs 406########################################################### 407 408# Creates ${HOME}/petsc.tar.gz [and petsc-lite.tar.gz] 409dist: 410 ${PETSC_DIR}/bin/maint/builddist ${PETSC_DIR} master 411 412# This target works only if you can do 'ssh petsc@login.mcs.anl.gov' 413# also copy the file over to ftp site. 414web-snapshot: 415 @if [ ! -f "${HOME}/petsc-master.tar.gz" ]; then \ 416 echo "~/petsc-master.tar.gz missing! cannot update petsc-master snapshot on mcs-web-site"; \ 417 else \ 418 echo "updating petsc-master snapshot on mcs-web-site"; \ 419 tmpdir=`mktemp -d -t petsc-doc.XXXXXXXX`; \ 420 cd $${tmpdir}; tar -xzf ${HOME}/petsc-master.tar.gz; \ 421 /usr/bin/rsync -e ssh -az --delete $${tmpdir}/petsc-master/ \ 422 petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc/petsc-master ;\ 423 /bin/cp -f /home/petsc/petsc-master.tar.gz /mcs/ftp/pub/petsc/petsc-master.tar.gz;\ 424 ${RM} -rf $${tmpdir} ;\ 425 fi 426 427# build the tarfile - and then update petsc-master snapshot on mcs-web-site 428update-web-snapshot: dist web-snapshot 429 430# This target updates website main pages 431update-web: 432 @cd ${PETSC_DIR}/src/docs; make PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} bib2html; \ 433 /usr/bin/rsync -az -C --exclude=documentation/index.html \ 434 --exclude=documentation/installation.html --exclude=download/index.html \ 435 ${PETSC_DIR}/src/docs/website/ petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc 436 @cd ${PETSC_DIR}/docs; /usr/bin/rsync -az developers.pdf petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc/developers/ 437 @cd ${PETSC_DIR}/src/docs/tex; /usr/bin/rsync -az petscapp.bib petsc.bib petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc/publications 438 439# 440# builds a single list of files for each PETSc library so they may all be built in parallel 441# without a recursive set of make calls 442createfastbuild: 443 cd src/vec; ${RM} -f files; /bin/echo -n "SOURCEC = " > files; make tree ACTION=sourcelist BASE_DIR=${PETSC_DIR}/src/vec 444 445########################################################### 446# 447# See script for details 448# 449gcov: 450 -@${PETSC_DIR}/bin/maint/gcov.py -run_gcov 451 452mergegcov: 453 -@${PETSC_DIR}/bin/maint/gcov.py -merge_gcov ${LOC} *.tar.gz 454 455######################## 456# 457# Create the include dependency graph (requires graphviz to be available) 458# 459includegraph: 460 -@${PETSC_DIR}/src/contrib/style/include-graph.sh includegraph.pdf 461 -@echo Include dependency graph written to includegraph.pdf 462 463# 464# ------------------------------------------------------------------------------- 465# 466# Some macros to check if the fortran interface is up-to-date. 467# 468countfortranfunctions: 469 -@cd ${PETSC_DIR}/src/fortran; egrep '^void' custom/*.c auto/*.c | \ 470 cut -d'(' -f1 | tr -s ' ' | cut -d' ' -f2 | uniq | egrep -v "(^$$|Petsc)" | \ 471 sed "s/_$$//" | sort > /tmp/countfortranfunctions 472 473countcfunctions: 474 -@grep PETSC_EXTERN ${PETSC_DIR}/include/*.h | grep "(" | tr -s ' ' | \ 475 cut -d'(' -f1 | cut -d' ' -f3 | grep -v "\*" | tr -s '\012' | \ 476 tr 'A-Z' 'a-z' | sort | uniq > /tmp/countcfunctions 477 478difffortranfunctions: countfortranfunctions countcfunctions 479 -@echo -------------- Functions missing in the fortran interface --------------------- 480 -@${DIFF} /tmp/countcfunctions /tmp/countfortranfunctions | grep "^<" | cut -d' ' -f2 481 -@echo ----------------- Functions missing in the C interface ------------------------ 482 -@${DIFF} /tmp/countcfunctions /tmp/countfortranfunctions | grep "^>" | cut -d' ' -f2 483 -@${RM} /tmp/countcfunctions /tmp/countfortranfunctions 484 485checkbadfortranstubs: 486 -@echo "=========================================" 487 -@echo "Functions with MPI_Comm as an Argument" 488 -@echo "=========================================" 489 -@cd ${PETSC_DIR}/src/fortran/auto; grep '^void' *.c | grep 'MPI_Comm' | \ 490 tr -s ' ' | tr -s ':' ' ' |cut -d'(' -f1 | cut -d' ' -f1,3 491 -@echo "=========================================" 492 -@echo "Functions with a String as an Argument" 493 -@echo "=========================================" 494 -@cd ${PETSC_DIR}/src/fortran/auto; grep '^void' *.c | grep 'char \*' | \ 495 tr -s ' ' | tr -s ':' ' ' |cut -d'(' -f1 | cut -d' ' -f1,3 496 -@echo "=========================================" 497 -@echo "Functions with Pointers to PETSc Objects as Argument" 498 -@echo "=========================================" 499 -@cd ${PETSC_DIR}/src/fortran/auto; \ 500 _p_OBJ=`grep _p_ ${PETSC_DIR}/include/*.h | tr -s ' ' | \ 501 cut -d' ' -f 3 | tr -s '\012' | grep -v '{' | cut -d'*' -f1 | \ 502 sed "s/_p_//g" | tr -s '\012 ' ' *|' ` ; \ 503 for OBJ in $$_p_OBJ; do \ 504 grep "$$OBJ \*" *.c | tr -s ' ' | tr -s ':' ' ' | \ 505 cut -d'(' -f1 | cut -d' ' -f1,3; \ 506 done 507 508checkpackagetests: 509 -@echo "Missing package tests" 510 -@cat config/examples/*.py > configexamples; pushd config/BuildSystem/config/packages/; packages=`ls *.py | sed "s/\\.py//g"`;popd; for i in $${packages}; do j=`echo $${i} | tr '[:upper:]' '[:lower:]'`; printf $${j} ; egrep "(with-$${j}|download-$${j})" configexamples | grep -v "=0" | wc -l ; done 511 -@echo "Missing download package tests" 512 -@cat config/examples/*.py > configexamples; pushd config/BuildSystem/config/packages/; packages=`grep -l "download " *.py | sed "s/\\.py//g"`;popd; for i in $${packages}; do j=`echo $${i} | tr '[:upper:]' '[:lower:]'`; printf $${j} ; egrep "(download-$${j})" configexamples | grep -v "=0" | wc -l ; done 513 514# 515# Automatically generates PETSc exercises in html from the tutorial examples. 516# 517# The introduction for each section is obtained from docs/manualpages/header_${MANSEC} is under RCS and may be edited 518# (used also in introductions to the manual pages) 519# The overall introduction is in docs/exercises/introduction.html and is under RCS and may be edited 520# The list of exercises is from TUTORIALS in each directory's makefile 521# 522# DO NOT EDIT the pageform.txt or *.htm files generated since they will be automatically replaced. 523# The pagemaker rule is in the file conf (at the bottom) 524# 525# Eventually the line below will replace the two cd in the rule below, it is just this way now for speed 526# -@${OMAKE} PETSC_DIR=${PETSC_DIR} pagemaker 527# 528exercises: 529 -@echo "=========================================" 530 -@echo "Generating HTML tutorial exercises" 531 -@${RM} docs/pageform.txt 532 -@echo "title=\"PETSc Exercises\"" > docs/pageform.txt 533 -@echo "access_title=Exercise Sections" >> docs/pageform.txt 534 -@echo "access_format=short" >> docs/pageform.txt 535 -@echo "startpage=../exercises/introduction.htm" >> docs/pageform.txt 536 -@echo "NONE title=\"Introduction\" command=link src=../exercises/introduction.htm" >> docs/pageform.txt 537 -@echo "Generating HTML for individual directories" 538 -@echo "=========================================" 539 -@${OMAKE} PETSC_DIR=${PETSC_DIR} ACTION=pagemaker tree 540 -@echo "Completed HTML for individual directories" 541 -@echo "NONE title=\"<HR>\" " >> docs/pageform.txt; 542 -@echo "NONE title=\"PETSc Documentation\" command=link src=../index.html target=replace" >> docs/pageform.txt 543 /home/MPI/class/mpiexmpl/maint/makepage.new -pageform=docs/pageform.txt -access_extra=/dev/null -outdir=docs/exercises 544 -@echo "=========================================" 545 546.PHONY: info info_h all build testexamples testfortran testexamples_uni testfortran_uni ranlib deletelibs allclean update \ 547 alletags etags etags_complete etags_noexamples etags_makefiles etags_examples etags_fexamples alldoc allmanualpages \ 548 allhtml allcleanhtml allci allco allrcslabel countfortranfunctions \ 549 start_configure configure_petsc configure_clean matlabbin 550 551petscao : petscmat petscao.f90.h 552petscdm : petscksp petscdm.f90.h 553petscdraw : petsc petscdraw.f90.h 554petscis : petsc petscis.f90.h 555petscksp : petscpc petscksp.f90.h 556petsclog : petsc petsclog.f90.h 557petscmat : petscvec petscmat.f90.h 558petscmg : petscksp petscmg.f90.h 559petscpc : petscmat petscpc.f90.h 560petscsnes : petscksp petscsnes.f90.h 561petscsys : petsc petscsys.f90.h 562petscts : petscsnes petscts.f90.h 563petsc : petsc.f90.h 564petscvec : petscis petscvec.f90.h 565petscviewer : petsc petscviewer.f90.h 566petscmesh : petsc petscmesh.f90.h 567modules : petscao petscdm petscdraw petscis petscksp petsclog petscmat petscmg petscpc petscsnes petscsys petscts petsc petscvec petscviewer petscmesh 568