1# 2# This is the makefile for compiling PETSc. See 3# http://www.mcs.anl.gov/petsc/documentation/installation.html for directions on installing PETSc. 4# See also conf for additional commands. 5# 6ALL: all 7LOCDIR = ./ 8DIRS = src include tutorials interfaces 9CFLAGS = 10FFLAGS = 11CPPFLAGS = 12FPPFLAGS = 13 14# next line defines PETSC_DIR and PETSC_ARCH if they are not set 15include ././${PETSC_ARCH}/lib/petsc/conf/petscvariables 16include ${PETSC_DIR}/lib/petsc/conf/variables 17include ${PETSC_DIR}/lib/petsc/conf/rules 18include ${PETSC_DIR}/lib/petsc/conf/test 19 20# This makefile contains a lot of PHONY targets with improperly specified prerequisites 21# where correct execution instead depends on the targets being processed in the correct 22# order. This is gross, but this makefile doesn't really do any work. Sub-makes still 23# benefit from parallelism. 24.NOTPARALLEL: 25 26# 27# Basic targets to build PETSc libraries. 28# all: builds the c, fortran, and f90 libraries 29all: 30 +@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} chk_petscdir chk_upgrade | tee ${PETSC_ARCH}/lib/petsc/conf/make.log 31 @ln -sf ${PETSC_ARCH}/lib/petsc/conf/make.log make.log 32 +@if [ "${MAKE_IS_GNUMAKE}" != "" ]; then \ 33 ${OMAKE_PRINTDIR} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} all-gnumake-local 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log; \ 34 elif [ "${PETSC_BUILD_USING_CMAKE}" != "" ]; then \ 35 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} all-cmake-local 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log \ 36 | egrep -v '( --check-build-system |cmake -E | -o CMakeFiles/petsc[[:lower:]]*.dir/| -o lib/libpetsc|CMakeFiles/petsc[[:lower:]]*\.dir/(build|depend|requires)|-f CMakeFiles/Makefile2|Dependee .* is newer than depender |provides\.build. is up to date)'; \ 37 else \ 38 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} all-legacy-local 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log \ 39 | ${GREP} -v "has no symbols"; \ 40 fi 41 @egrep -i "( error | error: |no such file or directory)" ${PETSC_ARCH}/lib/petsc/conf/make.log | tee ${PETSC_ARCH}/lib/petsc/conf/error.log > /dev/null 42 +@if test -s ${PETSC_ARCH}/lib/petsc/conf/error.log; then \ 43 printf ${PETSC_TEXT_HILIGHT}"**************************ERROR*************************************\n" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log; \ 44 echo " Error during compile, check ${PETSC_ARCH}/lib/petsc/conf/make.log" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log; \ 45 echo " Send it and ${PETSC_ARCH}/lib/petsc/conf/configure.log to petsc-maint@mcs.anl.gov" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log;\ 46 printf "********************************************************************"${PETSC_TEXT_NORMAL}"\n" 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log;\ 47 else \ 48 ${OMAKE} shared_install PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} 2>&1 | tee -a ${PETSC_ARCH}/lib/petsc/conf/make.log ;\ 49 fi #solaris make likes to print the whole command that gave error. So split this up into the smallest chunk below 50 @echo "Finishing make run at `date +'%a, %d %b %Y %H:%M:%S %z'`" >> ${PETSC_ARCH}/lib/petsc/conf/make.log 51 @if test -s ${PETSC_ARCH}/lib/petsc/conf/error.log; then exit 1; fi 52 53all-gnumake: 54 @if [ "${MAKE_IS_GNUMAKE}" != "" ]; then \ 55 ${OMAKE_PRINTDIR} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} PETSC_BUILD_USING_CMAKE="" all;\ 56 else printf ${PETSC_TEXT_HILIGHT}"Build not configured for GNUMAKE. Quiting"${PETSC_TEXT_NORMAL}"\n"; exit 1; fi 57 58all-cmake: 59 @if [ "${PETSC_BUILD_USING_CMAKE}" != "" ]; then \ 60 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} MAKE_IS_GNUMAKE="" all;\ 61 else printf ${PETSC_TEXT_HILIGHT}"Build not configured for CMAKE. Quiting"${PETSC_TEXT_NORMAL}"\n"; exit 1; fi 62 63all-legacy: 64 @${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} PETSC_BUILD_USING_CMAKE="" MAKE_IS_GNUMAKE="" all 65 66all-gnumake-local: info gnumake matlabbin mpi4py-build petsc4py-build libmesh-build slepc-build 67 68all-cmake-local: info cmakegen cmake matlabbin mpi4py-build petsc4py-build 69 70all-legacy-local: chklib_dir info deletelibs deletemods build matlabbin shared_nomesg mpi4py-build petsc4py-build 71 72# 73# Prints information about the system and version of PETSc being compiled 74# 75info: 76 -@echo "==========================================" 77 -@echo " " 78 -@echo "See documentation/faq.html and documentation/bugreporting.html" 79 -@echo "for help with installation problems. Please send EVERYTHING" 80 -@echo "printed out below when reporting problems. Please check the" 81 -@echo "mailing list archives and consider subscribing." 82 -@echo " " 83 -@echo " http://www.mcs.anl.gov/petsc/miscellaneous/mailing-lists.html" 84 -@echo " " 85 -@echo "==========================================" 86 -@echo Starting make run on `hostname` at `date +'%a, %d %b %Y %H:%M:%S %z'` 87 -@echo Machine characteristics: `uname -a` 88 -@echo "-----------------------------------------" 89 -@echo "Using PETSc directory: ${PETSC_DIR}" 90 -@echo "Using PETSc arch: ${PETSC_ARCH}" 91 -@echo "-----------------------------------------" 92 -@grep "define PETSC_VERSION" ${PETSC_DIR}/include/petscversion.h | ${SED} "s/........//" 93 -@echo "-----------------------------------------" 94 -@echo "Using configure Options: ${CONFIGURE_OPTIONS}" 95 -@echo "Using configuration flags:" 96 -@grep "\#define " ${PETSCCONF_H} 97 -@echo "-----------------------------------------" 98 -@echo "Using C/C++ compile: ${PETSC_COMPILE}" 99 -@if [ "${PETSC_LANGUAGE}" = "CONLY" -a "${MPICC_SHOW}" != "" ]; then \ 100 printf "mpicc -show: %b\n" "${MPICC_SHOW}"; \ 101 elif [ "${PETSC_LANGUAGE}" = "CXXONLY" -a "${MPICXX_SHOW}" != "" ]; then \ 102 printf "mpicxx -show: %b\n" "${MPICXX_SHOW}"; \ 103 fi; 104 -@if [ "${FC}" != "" ]; then \ 105 echo "Using Fortran compile: ${PETSC_FCOMPILE}";\ 106 if [ "${MPIFC_SHOW}" != "" ]; then \ 107 printf "mpif90 -show: %b\n" "${MPIFC_SHOW}"; \ 108 fi; \ 109 fi 110 -@if [ "${CUDAC}" != "" ]; then \ 111 echo "Using CUDA compile: ${PETSC_CUCOMPILE}";\ 112 fi 113 -@echo "-----------------------------------------" 114 -@echo "Using C/C++ linker: ${PCC_LINKER}" 115 -@echo "Using C/C++ flags: ${PCC_LINKER_FLAGS}" 116 -@if [ "${FC}" != "" ]; then \ 117 echo "Using Fortran linker: ${FC_LINKER}";\ 118 echo "Using Fortran flags: ${FC_LINKER_FLAGS}";\ 119 fi 120 -@echo "-----------------------------------------" 121 -@echo "Using system modules: ${LOADEDMODULES}" 122 -@TESTDIR=`mktemp -q -d -t petscmpi-XXXXXXXX` && \ 123 echo '#include <mpi.h>' > $${TESTDIR}/mpitest.c && \ 124 BUF=`${CPP} ${PETSC_CCPPFLAGS} $${TESTDIR}/mpitest.c |grep 'mpi\.h' | ( head -1 ; cat > /dev/null )` && \ 125 echo Using mpi.h: $${BUF}; ${RM} -rf $${TESTDIR} 126 -@echo "-----------------------------------------" 127 -@echo "Using libraries: ${PETSC_LIB}" 128 -@echo "------------------------------------------" 129 -@echo "Using mpiexec: ${MPIEXEC}" 130 -@echo "------------------------------------------" 131 -@echo "Using MAKEFLAGS: -j$(MAKE_NP) -l$(NPMAX) $(MAKEFLAGS)" 132 -@echo "==========================================" 133 134# 135# Builds the PETSc libraries 136# This target also builds fortran77 and f90 interface 137# files and compiles .F files 138# 139build: 140 -@echo "BEGINNING TO COMPILE LIBRARIES IN ALL DIRECTORIES" 141 -@echo "=========================================" 142 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=libfast tree 143 -@${RANLIB} ${PETSC_LIB_DIR}/*.${AR_LIB_SUFFIX} > tmpf 2>&1 ; ${GREP} -v "has no symbols" tmpf; ${RM} tmpf; 144 -@echo "Completed building libraries" 145 -@echo "=========================================" 146# 147# Build MatLab binaries 148# 149matlabbin: 150 -@if [ "${MATLAB_MEX}" != "" -a "${PETSC_SCALAR}" = "real" -a "${PETSC_PRECISION}" = "double" ]; then \ 151 echo "BEGINNING TO COMPILE MATLAB INTERFACE"; \ 152 if [ ! -d "${PETSC_DIR}/${PETSC_ARCH}/lib/petsc" ] ; then ${MKDIR} ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc; fi; \ 153 if [ ! -d "${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/matlab" ] ; then ${MKDIR} ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/matlab; fi; \ 154 cd src/sys/classes/viewer/impls/socket/matlab && ${OMAKE} matlabcodes PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR}; \ 155 echo "========================================="; \ 156 fi 157# 158# Builds PETSc test examples for a given architecture 159# 160test_install: test 161check: test 162test: 163 -+@${OMAKE} PATH="${PETSC_DIR}/${PETSC_ARCH}/lib:${PATH}" PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} test_build 2>&1 | tee ./${PETSC_ARCH}/lib/petsc/conf/test.log 164 -@if [ "${PETSC_WITH_BATCH}" = "" ]; then \ 165 printf "=========================================\n"; \ 166 printf "Now to evaluate the computer systems you plan use - do:\n"; \ 167 printf "make PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} streams\n"; \ 168 fi 169testx: 170 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testx_build 2>&1 | tee ./${PETSC_ARCH}/lib/petsc/conf/testx.log 171test_build: 172 -@echo "Running test examples to verify correct installation" 173 -@echo "Using PETSC_DIR=${PETSC_DIR} and PETSC_ARCH=${PETSC_ARCH}" 174 +@cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 175 +@cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testex19 176 +@if [ "${HYPRE_LIB}" != "" ] && [ "${PETSC_WITH_BATCH}" = "" ]; then \ 177 cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex19_hypre; \ 178 fi; 179 +@if [ "${MUMPS_LIB}" != "" ] && [ "${PETSC_WITH_BATCH}" = "" ]; then \ 180 cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex19_fieldsplit_mumps; \ 181 fi; 182 +@if [ "${SUPERLU_DIST_LIB}" != "" ] && [ "${PETSC_WITH_BATCH}" = "" ]; then \ 183 cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex19_superlu_dist; \ 184 fi; 185 +@if ( [ "${ML_LIB}" != "" ] || [ "${TRILINOS_LIB}" != "" ] ) && [ "${PETSC_WITH_BATCH}" = "" ]; then \ 186 cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} DIFF=${PETSC_DIR}/lib/petsc/bin/petscdiff runex19_ml; \ 187 fi; 188 +@cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ex19.rm 189 +@if [ "${PETSC4PY}" = "yes" ]; then \ 190 cd src/ksp/ksp/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testex100; \ 191 fi; 192 +@egrep "^#define PETSC_HAVE_FORTRAN 1" ${PETSCCONF_H} | tee .ftn.log > /dev/null; \ 193 if test -s .ftn.log; then \ 194 cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testex5f; \ 195 fi; ${RM} .ftn.log; 196 +@cd src/snes/examples/tutorials >/dev/null; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 197 -@echo "Completed test examples" 198testx_build: 199 -@echo "Running graphics test example to verify correct X11 installation" 200 -@echo "Using PETSC_DIR=${PETSC_DIR} and PETSC_ARCH=${PETSC_ARCH}" 201 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 202 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} testxex19 203 @cd src/snes/examples/tutorials; ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} clean 204 -@echo "Completed graphics test example" 205 206# Ranlib on the libraries 207ranlib: 208 ${RANLIB} ${PETSC_LIB_DIR}/*.${AR_LIB_SUFFIX} 209 210# Deletes PETSc libraries 211deletelibs: 212 -${RM} -rf ${PETSC_LIB_DIR}/libpetsc*.* 213deletemods: 214 -${RM} -f ${PETSC_DIR}/${PETSC_ARCH}/include/petsc*.mod 215 216# Cleans up build 217allclean-legacy: deletelibs deletemods 218 -@${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} ACTION=clean-legacy tree 219allclean-cmake: 220 -@cd ${PETSC_ARCH} && ${OMAKE} clean 221allclean-gnumake: 222 -@${OMAKE} -f gmakefile clean 223 224allclean: 225 @if [ "${MAKE_IS_GNUMAKE}" != "" ]; then \ 226 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} allclean-gnumake; \ 227 elif [ "${PETSC_BUILD_USING_CMAKE}" != "" ]; then \ 228 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} allclean-cmake; \ 229 else \ 230 ${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} allclean-legacy; \ 231 fi 232 233clean:: allclean 234 235distclean: chk_petscdir 236 @if [ -f ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/conf/reconfigure-${PETSC_ARCH}.py ]; then \ 237 echo "*** Preserving ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/conf/reconfigure-${PETSC_ARCH}.py in ${PETSC_DIR} ***"; \ 238 mv -f ${PETSC_DIR}/${PETSC_ARCH}/lib/petsc/conf/reconfigure-${PETSC_ARCH}.py ${PETSC_DIR}/; fi 239 @echo "*** Deleting all build files in ${PETSC_DIR}/${PETSC_ARCH} ***" 240 -${RM} -rf ${PETSC_DIR}/${PETSC_ARCH}/ 241 242 243# 244reconfigure: 245 @${PYTHON} ${PETSC_ARCH}/lib/petsc/conf/reconfigure-${PETSC_ARCH}.py 246# 247install: 248 @${PYTHON} ./config/install.py -destDir=${DESTDIR} 249 +${OMAKE} PETSC_ARCH=${PETSC_ARCH} PETSC_DIR=${PETSC_DIR} mpi4py-install petsc4py-install libmesh-install slepc-install 250 251newall: 252 -@cd src/sys; @${PYTHON} ${PETSC_DIR}/config/builder.py 253 -@cd src/vec; @${PYTHON} ${PETSC_DIR}/config/builder.py 254 -@cd src/mat; @${PYTHON} ${PETSC_DIR}/config/builder.py 255 -@cd src/dm; @${PYTHON} ${PETSC_DIR}/config/builder.py 256 -@cd src/ksp; @${PYTHON} ${PETSC_DIR}/config/builder.py 257 -@cd src/snes; @${PYTHON} ${PETSC_DIR}/config/builder.py 258 -@cd src/ts; @${PYTHON} ${PETSC_DIR}/config/builder.py 259 260streams: 261 +cd src/benchmarks/streams; ${OMAKE} PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} streams 262 263stream: 264 +cd src/benchmarks/streams; ${OMAKE} PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} stream 265# ------------------------------------------------------------------ 266# 267# All remaining actions are intended for PETSc developers only. 268# PETSc users should not generally need to use these commands. 269# 270# See the users manual for how the tags files may be used from Emacs and Vi/Vim 271# 272alletags: 273 -@${PYTHON} lib/petsc/bin/maint/generateetags.py 274 -@find config -type f -name "*.py" |grep -v SCCS | xargs etags -o TAGS_PYTHON 275 276# obtain gtags from http://www.gnu.org/s/global/ 277allgtags: 278 -@find ${PETSC_DIR}/include ${PETSC_DIR}/src ${PETSC_DIR}/bin -regex '\(.*makefile\|.*\.\(cc\|hh\|cpp\|C\|hpp\|c\|h\|cu\|m\)$$\)' | grep -v ftn-auto | gtags -f - 279 280allfortranstubs: 281 -@${RM} -rf ${PETSC_ARCH}/include/petsc/finclude/ftn-auto/*-tmpdir 282 @${PYTHON} lib/petsc/bin/maint/generatefortranstubs.py ${BFORT} ${VERBOSE} 283 -@${PYTHON} lib/petsc/bin/maint/generatefortranstubs.py -merge ${VERBOSE} 284 -@${RM} -rf ${PETSC_ARCH}/include/petsc/finclude/ftn-auto/*-tmpdir 285deletefortranstubs: 286 -@find . -type d -name ftn-auto | xargs rm -rf 287cmakegen: 288 -@${PYTHON} config/cmakegen.py 289# 290# These are here for the target allci and allco, and etags 291# 292 293BMAKEFILES = conf/variables conf/rules conf/test 294SCRIPTS = lib/petsc/bin/maint/builddist lib/petsc/bin/maint/wwwman lib/petsc/bin/maint/xclude lib/petsc/bin/maint/bugReport.py lib/petsc/bin/maint/buildconfigtest lib/petsc/bin/maint/builddistlite \ 295 lib/petsc/bin/maint/buildtest lib/petsc/bin/maint/checkBuilds.py lib/petsc/bin/maint/copylognightly lib/petsc/bin/maint/copylognightly.tao lib/petsc/bin/maint/countfiles lib/petsc/bin/maint/findbadfiles \ 296 lib/petsc/bin/maint/fixinclude lib/petsc/bin/maint/getexlist lib/petsc/bin/maint/getpdflabels.py lib/petsc/bin/maint/helpindex.py lib/petsc/bin/maint/hosts.local lib/petsc/bin/maint/hosts.solaris \ 297 lib/petsc/bin/maint/lex.py lib/petsc/bin/maint/mapnameslatex.py lib/petsc/bin/maint/startnightly lib/petsc/bin/maint/startnightly.tao lib/petsc/bin/maint/submitPatch.py \ 298 lib/petsc/bin/maint/update-docs.py lib/petsc/bin/maint/wwwindex.py lib/petsc/bin/maint/xcludebackup lib/petsc/bin/maint/xcludecblas lib/petsc/bin/maint/zap lib/petsc/bin/maint/zapall \ 299 config/PETSc/Configure.py config/PETSc/Options.py \ 300 config/PETSc/utilities/*.py 301 302 303# Builds all the documentation - should be done every night 304alldoc: allcite allpdf alldoc1 alldoc2 alldoc3 docsetdate 305 306# Build just citations 307allcite: chk_loc deletemanualpages 308 -${PYTHON} lib/petsc/bin/maint/countpetsccits.py 309 -${OMAKE} ACTION=manualpages_buildcite tree_basic LOC=${LOC} 310 -@sed -e s%man+../%man+manualpages/% ${LOC}/docs/manualpages/manualpages.cit > ${LOC}/docs/manualpages/htmlmap 311 -@cat ${PETSC_DIR}/src/docs/mpi.www.index >> ${LOC}/docs/manualpages/htmlmap 312 313# Build just PDF manuals + prerequisites 314allpdf: chk_loc allcite 315 -cd src/docs/tex/manual; ${OMAKE} manual.pdf LOC=${LOC} 316 -cd src/docs/tex/manual; ${OMAKE} developers.pdf LOC=${LOC} 317 -cd src/docs/tao_tex/manual; ${OMAKE} manual.pdf LOC=${LOC} 318 319# Build just manual pages + prerequisites 320allmanpages: chk_loc allcite 321 -${OMAKE} ACTION=manualpages tree_basic LOC=${LOC} 322 323# Build just manual examples + prerequisites 324allmanexamples: chk_loc allmanpages 325 -${OMAKE} ACTION=manexamples tree_basic LOC=${LOC} 326 327# Build everything that goes into 'doc' dir except html sources 328alldoc1: chk_loc chk_concepts_dir allcite allmanpages allmanexamples 329 -${OMAKE} manimplementations LOC=${LOC} 330 -${PYTHON} lib/petsc/bin/maint/wwwindex.py ${PETSC_DIR} ${LOC} 331 -${OMAKE} manconcepts LOC=${LOC} 332 -${OMAKE} ACTION=getexlist tree_basic LOC=${LOC} 333 -${OMAKE} ACTION=exampleconcepts tree_basic LOC=${LOC} 334 -${PYTHON} lib/petsc/bin/maint/helpindex.py ${PETSC_DIR} ${LOC} 335 336# Builds .html versions of the source 337# html overwrites some stuff created by update-docs - hence this is done later. 338alldoc2: chk_loc 339 -${OMAKE} ACTION=html PETSC_DIR=${PETSC_DIR} alltree LOC=${LOC} 340 -${PYTHON} lib/petsc/bin/maint/update-docs.py ${PETSC_DIR} ${LOC} 341# 342# Builds HTML versions of Matlab scripts 343alldoc3: chk_loc 344 if [ "${MATLAB_COMMAND}" != "" ]; then\ 345 export MATLABPATH=${MATLABPATH}:${PETSC_DIR}/share/petsc/matlab; \ 346 cd ${PETSC_DIR}/share/petsc/matlab; ${MATLAB_COMMAND} -nodisplay -nodesktop -r "generatehtml;exit" ; \ 347 fi 348 349# 350# Makes links for all manual pages in $LOC/docs/manualpages/all 351allman: 352 @cd ${LOC}/docs/manualpages; rm -rf all ; mkdir all ; find * -type d -wholename all -prune -o -name index.html -prune -o -type f -name \*.html -exec ln -s -f ../{} all \; 353 354DOCSETDATE_PRUNE_LIST=-o -type f -wholename share/petsc/saws/linearsolveroptions.html -prune -o -type f -wholename tutorials/HandsOnExercise.html -prune -o -type f -wholename tutorials/TAOHandsOnExercise.html -prune 355 356# modify all generated html files and add in version number, date, canonical URL info. 357docsetdate: chk_petscdir 358 @echo "Updating generated html files with petsc version, date, canonical URL info";\ 359 version_release=`grep '^#define PETSC_VERSION_RELEASE ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 360 version_major=`grep '^#define PETSC_VERSION_MAJOR ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 361 version_minor=`grep '^#define PETSC_VERSION_MINOR ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 362 version_subminor=`grep '^#define PETSC_VERSION_SUBMINOR ' include/petscversion.h |tr -s ' ' | cut -d ' ' -f 3`; \ 363 if [ $${version_release} = 0 ]; then \ 364 petscversion=petsc-master; \ 365 export petscversion; \ 366 elif [ $${version_release} = 1 ]; then \ 367 petscversion=petsc-$${version_major}.$${version_minor}.$${version_subminor}; \ 368 export petscversion; \ 369 else \ 370 echo "Unknown PETSC_VERSION_RELEASE: $${version_release}"; \ 371 exit; \ 372 fi; \ 373 datestr=`git log -1 --pretty=format:%ci | cut -d ' ' -f 1`; \ 374 export datestr; \ 375 gitver=`git describe --match "v*"`; \ 376 export gitver; \ 377 find * -type d -wholename src/docs/website -prune -o -type d -wholename src/benchmarks/results -prune -o \ 378 -type d -wholename config/BuildSystem/docs/website -prune -o -type d -wholename include/web -prune -o \ 379 -type d -wholename 'arch-*' -prune -o -type d -wholename src/tops -prune -o -type d -wholename externalpackages -prune ${DOCSETDATE_PRUNE_LIST} -o \ 380 -type f -name \*.html \ 381 -exec perl -pi -e 's^(<body.*>)^$$1\n <div id=\"version\" align=right><b>$$ENV{petscversion} $$ENV{datestr}</b></div>\n <div id="bugreport" align=right><a href="mailto:petsc-maint\@mcs.anl.gov?subject=Typo or Error in Documentation &body=Please describe the typo or error in the documentation: $$ENV{petscversion} $$ENV{gitver} {} "><small>Report Typos and Errors</small></a></div>^i' {} \; \ 382 -exec perl -pi -e 's^(<head>)^$$1 <link rel="canonical" href="http://www.mcs.anl.gov/petsc/petsc-current/{}" />^i' {} \; ; \ 383 echo "Done fixing version number, date, canonical URL info" 384 385alldocclean: deletemanualpages allcleanhtml 386 387# Deletes man pages (HTML version) 388deletemanualpages: chk_loc 389 -@if [ -d ${LOC} -a -d ${LOC}/docs/manualpages ]; then \ 390 find ${LOC}/docs/manualpages -type f -name "*.html" -exec ${RM} {} \; ;\ 391 ${RM} ${LOC}/docs/exampleconcepts ;\ 392 ${RM} ${LOC}/docs/manconcepts ;\ 393 ${RM} ${LOC}/docs/manualpages/manualpages.cit ;\ 394 ${PYTHON} lib/petsc/bin/maint/update-docs.py ${PETSC_DIR} ${LOC} clean;\ 395 fi 396 397allcleanhtml: 398 -${OMAKE} ACTION=cleanhtml PETSC_DIR=${PETSC_DIR} alltree 399 400chk_concepts_dir: chk_loc 401 @if [ ! -d "${LOC}/docs/manualpages/concepts" ]; then \ 402 echo Making directory ${LOC}/docs/manualpages/concepts for library; ${MKDIR} ${LOC}/docs/manualpages/concepts; fi 403 404########################################################### 405# targets to build distribution and update docs 406########################################################### 407 408# Creates ${HOME}/petsc.tar.gz [and petsc-lite.tar.gz] 409dist: 410 ${PETSC_DIR}/lib/petsc/bin/maint/builddist ${PETSC_DIR} master 411 412# This target works only if you can do 'ssh petsc@login.mcs.anl.gov' 413# also copy the file over to ftp site. 414web-snapshot: 415 @if [ ! -f "${HOME}/petsc-master.tar.gz" ]; then \ 416 echo "~/petsc-master.tar.gz missing! cannot update petsc-master snapshot on mcs-web-site"; \ 417 else \ 418 echo "updating petsc-master snapshot on mcs-web-site"; \ 419 tmpdir=`mktemp -d -t petsc-doc.XXXXXXXX`; \ 420 cd $${tmpdir}; tar -xzf ${HOME}/petsc-master.tar.gz; \ 421 /usr/bin/rsync -e ssh -az --delete $${tmpdir}/petsc-master/ \ 422 petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc/petsc-master ;\ 423 /bin/cp -f /home/petsc/petsc-master.tar.gz /mcs/ftp/pub/petsc/petsc-master.tar.gz;\ 424 ${RM} -rf $${tmpdir} ;\ 425 fi 426 427# build the tarfile - and then update petsc-master snapshot on mcs-web-site 428update-web-snapshot: dist web-snapshot 429 430# This target updates website main pages 431update-web: 432 @cd ${PETSC_DIR}/src/docs; make PETSC_DIR=${PETSC_DIR} PETSC_ARCH=${PETSC_ARCH} bib2html; \ 433 /usr/bin/rsync -az -C --exclude=documentation/index.html \ 434 --exclude=documentation/installation.html --exclude=download/index.html \ 435 ${PETSC_DIR}/src/docs/website/ petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc 436 @cd ${PETSC_DIR}/docs; /usr/bin/rsync -az developers.pdf petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc/developers/ 437 @cd ${PETSC_DIR}/src/docs/tex; /usr/bin/rsync -az petscapp.bib petsc.bib petsc@login.mcs.anl.gov:/mcs/web/research/projects/petsc/publications 438 439# 440# builds a single list of files for each PETSc library so they may all be built in parallel 441# without a recursive set of make calls 442createfastbuild: 443 cd src/vec; ${RM} -f files; /bin/echo -n "SOURCEC = " > files; make tree ACTION=sourcelist BASE_DIR=${PETSC_DIR}/src/vec 444 445########################################################### 446# 447# See script for details 448# 449gcov: 450 -@$(PYTHON) ${PETSC_DIR}/lib/petsc/bin/maint/gcov.py -run_gcov 451 452mergegcov: 453 -@$(PYTHON) ${PETSC_DIR}/lib/petsc/bin/maint/gcov.py -merge_gcov ${LOC} *.tar.gz 454 455######################## 456# 457# Create the include dependency graph (requires graphviz to be available) 458# 459includegraph: 460 -@${PETSC_DIR}/src/contrib/style/include-graph.sh includegraph.pdf 461 -@echo Include dependency graph written to includegraph.pdf 462 463# 464# ------------------------------------------------------------------------------- 465# 466# Some macros to check if the fortran interface is up-to-date. 467# 468countfortranfunctions: 469 -@cd ${PETSC_DIR}/src/fortran; egrep '^void' custom/*.c auto/*.c | \ 470 cut -d'(' -f1 | tr -s ' ' | cut -d' ' -f2 | uniq | egrep -v "(^$$|Petsc)" | \ 471 sed "s/_$$//" | sort > /tmp/countfortranfunctions 472 473countcfunctions: 474 -@grep PETSC_EXTERN ${PETSC_DIR}/include/*.h | grep "(" | tr -s ' ' | \ 475 cut -d'(' -f1 | cut -d' ' -f3 | grep -v "\*" | tr -s '\012' | \ 476 tr 'A-Z' 'a-z' | sort | uniq > /tmp/countcfunctions 477 478difffortranfunctions: countfortranfunctions countcfunctions 479 -@echo -------------- Functions missing in the fortran interface --------------------- 480 -@${DIFF} /tmp/countcfunctions /tmp/countfortranfunctions | grep "^<" | cut -d' ' -f2 481 -@echo ----------------- Functions missing in the C interface ------------------------ 482 -@${DIFF} /tmp/countcfunctions /tmp/countfortranfunctions | grep "^>" | cut -d' ' -f2 483 -@${RM} /tmp/countcfunctions /tmp/countfortranfunctions 484 485checkbadfortranstubs: 486 -@echo "=========================================" 487 -@echo "Functions with MPI_Comm as an Argument" 488 -@echo "=========================================" 489 -@cd ${PETSC_DIR}/src/fortran/auto; grep '^void' *.c | grep 'MPI_Comm' | \ 490 tr -s ' ' | tr -s ':' ' ' |cut -d'(' -f1 | cut -d' ' -f1,3 491 -@echo "=========================================" 492 -@echo "Functions with a String as an Argument" 493 -@echo "=========================================" 494 -@cd ${PETSC_DIR}/src/fortran/auto; grep '^void' *.c | grep 'char \*' | \ 495 tr -s ' ' | tr -s ':' ' ' |cut -d'(' -f1 | cut -d' ' -f1,3 496 -@echo "=========================================" 497 -@echo "Functions with Pointers to PETSc Objects as Argument" 498 -@echo "=========================================" 499 -@cd ${PETSC_DIR}/src/fortran/auto; \ 500 _p_OBJ=`grep _p_ ${PETSC_DIR}/include/*.h | tr -s ' ' | \ 501 cut -d' ' -f 3 | tr -s '\012' | grep -v '{' | cut -d'*' -f1 | \ 502 sed "s/_p_//g" | tr -s '\012 ' ' *|' ` ; \ 503 for OBJ in $$_p_OBJ; do \ 504 grep "$$OBJ \*" *.c | tr -s ' ' | tr -s ':' ' ' | \ 505 cut -d'(' -f1 | cut -d' ' -f1,3; \ 506 done 507 508checkpackagetests: 509 -@echo "Missing package tests" 510 -@cat config/examples/*.py > configexamples; pushd config/BuildSystem/config/packages/; packages=`ls *.py | sed "s/\\.py//g"`;popd; for i in $${packages}; do j=`echo $${i} | tr '[:upper:]' '[:lower:]'`; printf $${j} ; egrep "(with-$${j}|download-$${j})" configexamples | grep -v "=0" | wc -l ; done 511 -@echo "Missing download package tests" 512 -@cat config/examples/*.py > configexamples; pushd config/BuildSystem/config/packages/; packages=`grep -l "download " *.py | sed "s/\\.py//g"`;popd; for i in $${packages}; do j=`echo $${i} | tr '[:upper:]' '[:lower:]'`; printf $${j} ; egrep "(download-$${j})" configexamples | grep -v "=0" | wc -l ; done 513 514# 515# Automatically generates PETSc exercises in html from the tutorial examples. 516# 517# The introduction for each section is obtained from docs/manualpages-cite/header_${MANSEC} may be edited 518# (used also in introductions to the manual pages) 519# 520# DO NOT EDIT the *.htm files generated since they will be automatically replaced. 521# 522# Eventually the line below will replace the two cd in the rule below, it is just this way now for speed 523# -@${OMAKE} PETSC_DIR=${PETSC_DIR} pagemaker 524# 525exercises: 526 -@echo "=========================================" 527 -@echo "Generating HTML tutorial exercises" 528 -@${RM} docs/pageform.txt 529 -@echo "title=\"PETSc Exercises\"" > docs/pageform.txt 530 -@echo "access_title=Exercise Sections" >> docs/pageform.txt 531 -@echo "access_format=short" >> docs/pageform.txt 532 -@echo "startpage=../exercises/introduction.htm" >> docs/pageform.txt 533 -@echo "NONE title=\"Introduction\" command=link src=../exercises/introduction.htm" >> docs/pageform.txt 534 -@echo "Generating HTML for individual directories" 535 -@echo "=========================================" 536 -@${OMAKE} PETSC_DIR=${PETSC_DIR} ACTION=pagemaker tree 537 -@echo "Completed HTML for individual directories" 538 -@echo "NONE title=\"<HR>\" " >> docs/pageform.txt; 539 -@echo "NONE title=\"PETSc Documentation\" command=link src=../index.html target=replace" >> docs/pageform.txt 540 /home/MPI/class/mpiexmpl/maint/makepage.new -pageform=docs/pageform.txt -access_extra=/dev/null -outdir=docs/exercises 541 -@echo "=========================================" 542 543.PHONY: info info_h all build ranlib deletelibs allclean update \ 544 alletags etags etags_complete etags_noexamples etags_makefiles etags_examples etags_fexamples alldoc allmanualpages \ 545 allhtml allcleanhtml allci allco allrcslabel countfortranfunctions \ 546 start_configure configure_petsc configure_clean matlabbin install 547 548petscao : petscmat petscao.f90.h 549petscdm : petscksp petscdm.f90.h 550petscdraw : petsc petscdraw.f90.h 551petscis : petsc petscis.f90.h 552petscksp : petscpc petscksp.f90.h 553petsclog : petsc petsclog.f90.h 554petscmat : petscvec petscmat.f90.h 555petscmg : petscksp petscmg.f90.h 556petscpc : petscmat petscpc.f90.h 557petscsnes : petscksp petscsnes.f90.h 558petscsys : petsc petscsys.f90.h 559petscts : petscsnes petscts.f90.h 560petsc : petsc.f90.h 561petscvec : petscis petscvec.f90.h 562petscviewer : petsc petscviewer.f90.h 563petscmesh : petsc petscmesh.f90.h 564modules : petscao petscdm petscdraw petscis petscksp petsclog petscmat petscmg petscpc petscsnes petscsys petscts petsc petscvec petscviewer petscmesh 565