1 static const char help[] = "STREAM benchmark specialized for SSE2\n\\n"; 2 3 /* Note: this file has been modified significantly from its original version */ 4 #include <emmintrin.h> 5 #include <petsctime.h> 6 #include <petscsys.h> 7 #if defined(HAVE_NUMA) 8 #include <numa.h> 9 #endif 10 #include <limits.h> 11 #include <float.h> 12 13 #ifndef SSE2 14 # define SSE2 1 15 #endif 16 #ifndef __SSE2__ 17 # error SSE2 instruction set is not enabled, try adding -march=native to CFLAGS or disable by adding -DSSE2=0 18 #endif 19 #ifndef PREFETCH_NTA /* Use software prefetch and set non-temporal policy so that lines evicted from L1D will not subsequently reside in L2 or L3. */ 20 # define PREFETCH_NTA 1 21 #endif 22 #ifndef STATIC_ALLOC /* Statically allocate the vectors. Most platforms do not find physical pages when memory is allocated, therefore the faulting strategy still affects performance. */ 23 # define STATIC_ALLOC 0 24 #endif 25 #ifndef FAULT_TOGETHER /* Faults all three vectors together which usually interleaves DRAM pages in physical memory. */ 26 # define FAULT_TOGETHER 0 27 #endif 28 #ifndef USE_MEMCPY /* Literally call memcpy(3) for the COPY benchmark. Some compilers detect the unoptimized loop as memcpy and call this anyway. */ 29 # define USE_MEMCPY 0 30 #endif 31 32 /* 33 * Program: Stream 34 * Programmer: Joe R. Zagar 35 * Revision: 4.0-BETA, October 24, 1995 36 * Original code developed by John D. McCalpin 37 * 38 * This program measures memory transfer rates in MB/s for simple 39 * computational kernels coded in C. These numbers reveal the quality 40 * of code generation for simple uncacheable kernels as well as showing 41 * the cost of floating-point operations relative to memory accesses. 42 * 43 * INSTRUCTIONS: 44 * 45 * 1) Stream requires a good bit of memory to run. Adjust the 46 * value of 'N' (below) to give a 'timing calibration' of 47 * at least 20 clock-ticks. This will provide rate estimates 48 * that should be good to about 5% precision. 49 */ 50 51 # define N 4000000 52 # define NTIMES 100 53 # define OFFSET 0 54 55 # define HLINE "-------------------------------------------------------------\n" 56 57 # ifndef MIN 58 # define MIN(x,y) ((x)<(y)?(x):(y)) 59 # endif 60 # ifndef MAX 61 # define MAX(x,y) ((x)>(y)?(x):(y)) 62 # endif 63 64 #if STATIC_ALLOC 65 double a[N+OFFSET],b[N+OFFSET],c[N+OFFSET]; 66 #endif 67 68 static int checktick(void); 69 static double Second(void); 70 71 int main(int argc,char *argv[]) 72 { 73 const char *label[4] = {"Copy", "Scale","Add", "Triad"}; 74 const double bytes[4] = {2 * sizeof(double) * N, 75 2 * sizeof(double) * N, 76 3 * sizeof(double) * N, 77 3 * sizeof(double) * N}; 78 double rmstime[4] = {0},maxtime[4] = {0},mintime[4] = {FLT_MAX,FLT_MAX,FLT_MAX,FLT_MAX}; 79 int quantum; 80 int BytesPerWord,j,k,size; 81 PetscInt node = -1; 82 double scalar, t, times[4][NTIMES]; 83 #if !STATIC_ALLOC 84 double *PETSC_RESTRICT a,*PETSC_RESTRICT b,*PETSC_RESTRICT c; 85 #endif 86 87 PetscInitialize(&argc,&argv,0,help); 88 MPI_Comm_size(PETSC_COMM_WORLD,&size); 89 PetscOptionsGetInt(PETSC_NULL,"-node",&node,PETSC_NULL); 90 /* --- SETUP --- determine precision and check timing --- */ 91 92 PetscPrintf(PETSC_COMM_WORLD,HLINE); 93 BytesPerWord = sizeof(double); 94 PetscPrintf(PETSC_COMM_WORLD,"This system uses %d bytes per DOUBLE PRECISION word.\n", 95 BytesPerWord); 96 97 PetscPrintf(PETSC_COMM_WORLD,HLINE); 98 PetscPrintf(PETSC_COMM_WORLD,"Array size = %d, Offset = %d\n" , N, OFFSET); 99 PetscPrintf(PETSC_COMM_WORLD,"Total memory required = %.1f MB per process.\n", 100 (3 * N * BytesPerWord) / 1048576.0); 101 PetscPrintf(PETSC_COMM_WORLD,"Each test is run %d times, but only\n", NTIMES); 102 PetscPrintf(PETSC_COMM_WORLD,"the *best* time for each is used.\n"); 103 104 /* Get initial value for system clock. */ 105 106 #if !STATIC_ALLOC 107 if (node == -1) { 108 posix_memalign((void**)&a,64,N*sizeof(double)); 109 posix_memalign((void**)&b,64,N*sizeof(double)); 110 posix_memalign((void**)&c,64,N*sizeof(double)); 111 } else if (node == -2) { 112 a = malloc(N*sizeof(double)); 113 b = malloc(N*sizeof(double)); 114 c = malloc(N*sizeof(double)); 115 #if defined(HAVE_NUMA) 116 } else { 117 a = numa_alloc_onnode(N*sizeof(double),node); 118 b = numa_alloc_onnode(N*sizeof(double),node); 119 c = numa_alloc_onnode(N*sizeof(double),node); 120 #endif 121 } 122 #endif 123 #if FAULT_TOGETHER 124 for (j=0; j<N; j++) { 125 a[j] = 1.0; 126 b[j] = 2.0; 127 c[j] = 0.0; 128 } 129 #else 130 for (j=0; j<N; j++) a[j] = 1.0; 131 for (j=0; j<N; j++) b[j] = 2.0; 132 for (j=0; j<N; j++) c[j] = 0.0; 133 #endif 134 135 PetscPrintf(PETSC_COMM_WORLD,HLINE); 136 137 if ( (quantum = checktick()) >= 1) 138 PetscPrintf(PETSC_COMM_WORLD,"Your clock granularity/precision appears to be " 139 "%d microseconds.\n", quantum); 140 else 141 PetscPrintf(PETSC_COMM_WORLD,"Your clock granularity appears to be " 142 "less than one microsecond.\n"); 143 144 t = Second(); 145 for (j = 0; j < N; j++) 146 a[j] = 2.0E0 * a[j]; 147 t = 1.0E6 * (Second() - t); 148 149 PetscPrintf(PETSC_COMM_WORLD,"Each test below will take on the order" 150 " of %d microseconds.\n", (int) t ); 151 PetscPrintf(PETSC_COMM_WORLD," (= %d clock ticks)\n", (int) (t/quantum) ); 152 PetscPrintf(PETSC_COMM_WORLD,"Increase the size of the arrays if this shows that\n"); 153 PetscPrintf(PETSC_COMM_WORLD,"you are not getting at least 20 clock ticks per test.\n"); 154 155 PetscPrintf(PETSC_COMM_WORLD,HLINE); 156 157 PetscPrintf(PETSC_COMM_WORLD,"WARNING -- The above is only a rough guideline.\n"); 158 PetscPrintf(PETSC_COMM_WORLD,"For best results, please be sure you know the\n"); 159 PetscPrintf(PETSC_COMM_WORLD,"precision of your system timer.\n"); 160 PetscPrintf(PETSC_COMM_WORLD,HLINE); 161 162 /* --- MAIN LOOP --- repeat test cases NTIMES times --- */ 163 164 scalar = 3.0; 165 for (k=0; k<NTIMES; k++) { 166 MPI_Barrier(PETSC_COMM_WORLD); 167 /* ### COPY: c <- a ### */ 168 times[0][k] = Second(); 169 MPI_Barrier(PETSC_COMM_WORLD); 170 #if USE_MEMCPY 171 memcpy(c,a,N*sizeof(double)); 172 #elif SSE2 173 for (j=0; j<N; j+=8) { 174 _mm_stream_pd(c+j+0,_mm_load_pd(a+j+0)); 175 _mm_stream_pd(c+j+2,_mm_load_pd(a+j+2)); 176 _mm_stream_pd(c+j+4,_mm_load_pd(a+j+4)); 177 _mm_stream_pd(c+j+6,_mm_load_pd(a+j+6)); 178 # if PREFETCH_NTA 179 _mm_prefetch(a+j+64,_MM_HINT_NTA); 180 # endif 181 } 182 #else 183 for (j=0; j<N; j++) c[j] = a[j]; 184 #endif 185 MPI_Barrier(PETSC_COMM_WORLD); 186 times[0][k] = Second() - times[0][k]; 187 188 /* ### SCALE: b <- scalar * c ### */ 189 times[1][k] = Second(); 190 MPI_Barrier(PETSC_COMM_WORLD); 191 #if SSE2 192 { 193 __m128d scalar2 = _mm_set1_pd(scalar); 194 for (j=0; j<N; j+=8) { 195 _mm_stream_pd(b+j+0,_mm_mul_pd(scalar2,_mm_load_pd(c+j+0))); 196 _mm_stream_pd(b+j+2,_mm_mul_pd(scalar2,_mm_load_pd(c+j+2))); 197 _mm_stream_pd(b+j+4,_mm_mul_pd(scalar2,_mm_load_pd(c+j+4))); 198 _mm_stream_pd(b+j+6,_mm_mul_pd(scalar2,_mm_load_pd(c+j+6))); 199 # if PREFETCH_NTA 200 _mm_prefetch(c+j+64,_MM_HINT_NTA); 201 # endif 202 } 203 } 204 #else 205 for (j=0; j<N; j++) b[j] = scalar*c[j]; 206 #endif 207 MPI_Barrier(PETSC_COMM_WORLD); 208 times[1][k] = Second() - times[1][k]; 209 210 /* ### ADD: c <- a + b ### */ 211 times[2][k] = Second(); 212 MPI_Barrier(PETSC_COMM_WORLD); 213 #if SSE2 214 { 215 for (j=0; j<N; j+=8) { 216 _mm_stream_pd(c+j+0,_mm_add_pd(_mm_load_pd(a+j+0),_mm_load_pd(b+j+0))); 217 _mm_stream_pd(c+j+2,_mm_add_pd(_mm_load_pd(a+j+2),_mm_load_pd(b+j+2))); 218 _mm_stream_pd(c+j+4,_mm_add_pd(_mm_load_pd(a+j+4),_mm_load_pd(b+j+4))); 219 _mm_stream_pd(c+j+6,_mm_add_pd(_mm_load_pd(a+j+6),_mm_load_pd(b+j+6))); 220 # if PREFETCH_NTA 221 _mm_prefetch(a+j+64,_MM_HINT_NTA); 222 _mm_prefetch(b+j+64,_MM_HINT_NTA); 223 # endif 224 } 225 } 226 #else 227 for (j=0; j<N; j++) c[j] = a[j]+b[j]; 228 #endif 229 MPI_Barrier(PETSC_COMM_WORLD); 230 times[2][k] = Second() - times[2][k]; 231 232 /* ### TRIAD: a <- b + scalar * c ### */ 233 times[3][k] = Second(); 234 MPI_Barrier(PETSC_COMM_WORLD); 235 #if SSE2 236 { 237 __m128d scalar2 = _mm_set1_pd(scalar); 238 for (j=0; j<N; j+=8) { 239 _mm_stream_pd(a+j+0,_mm_add_pd(_mm_load_pd(b+j+0),_mm_mul_pd(scalar2,_mm_load_pd(c+j+0)))); 240 _mm_stream_pd(a+j+2,_mm_add_pd(_mm_load_pd(b+j+2),_mm_mul_pd(scalar2,_mm_load_pd(c+j+2)))); 241 _mm_stream_pd(a+j+4,_mm_add_pd(_mm_load_pd(b+j+4),_mm_mul_pd(scalar2,_mm_load_pd(c+j+4)))); 242 _mm_stream_pd(a+j+6,_mm_add_pd(_mm_load_pd(b+j+6),_mm_mul_pd(scalar2,_mm_load_pd(c+j+6)))); 243 # if PREFETCH_NTA 244 _mm_prefetch(b+j+64,_MM_HINT_NTA); 245 _mm_prefetch(c+j+64,_MM_HINT_NTA); 246 # endif 247 } 248 } 249 #else 250 for (j=0; j<N; j++) a[j] = b[j]+scalar*c[j]; 251 #endif 252 MPI_Barrier(PETSC_COMM_WORLD); 253 times[3][k] = Second() - times[3][k]; 254 } 255 256 /* --- SUMMARY --- */ 257 258 for (k=0; k<NTIMES; k++) { 259 for (j=0; j<4; j++) { 260 rmstime[j] = rmstime[j] + (times[j][k] * times[j][k]); 261 mintime[j] = MIN(mintime[j], times[j][k]); 262 maxtime[j] = MAX(maxtime[j], times[j][k]); 263 } 264 } 265 266 267 PetscPrintf(PETSC_COMM_WORLD,"%8s: %11s %11s %11s %11s %11s\n","Function","Rate (MB/s)","Total (MB/s)","RMS time","Min time","Max time"); 268 for (j=0; j<4; j++) { 269 rmstime[j] = sqrt(rmstime[j]/(double)NTIMES); 270 PetscPrintf(PETSC_COMM_WORLD,"%8s: %11.4f %11.4f %11.4f %11.4f %11.4f\n", label[j], 1.0e-06*bytes[j]/mintime[j], size*1.0e-06*bytes[j]/mintime[j], rmstime[j], mintime[j], maxtime[j]); 271 } 272 PetscFinalize(); 273 return 0; 274 } 275 276 static double Second() { 277 double t; 278 PetscTime(t); 279 return t; 280 } 281 282 #define M 20 283 static int checktick() 284 { 285 int i, minDelta, Delta; 286 double t1, t2, timesfound[M]; 287 288 /* Collect a sequence of M unique time values from the system. */ 289 290 for (i = 0; i < M; i++) { 291 t1 = Second(); 292 while ((t2 = Second()) - t1 < 1.0E-6) {} 293 timesfound[i] = t1 = t2; 294 } 295 296 /* 297 * Determine the minimum difference between these M values. 298 * This result will be our estimate (in microseconds) for the 299 * clock granularity. 300 */ 301 302 minDelta = 1000000; 303 for (i = 1; i < M; i++) { 304 Delta = (int)( 1.0E6 * (timesfound[i]-timesfound[i-1])); 305 minDelta = MIN(minDelta, MAX(Delta,0)); 306 } 307 308 return(minDelta); 309 } 310