1 #include <petsc/private/dmpleximpl.h> /*I "petscdmplex.h" I*/ 2 #include <petscsf.h> 3 4 /*@ 5 DMPlexOrientPoint - Act with the given orientation on the cone points of this mesh point, and update its use in the mesh. 6 7 Not Collective 8 9 Input Parameters: 10 + dm - The `DM` 11 . p - The mesh point 12 - o - The orientation 13 14 Level: intermediate 15 16 .seealso: [](ch_unstructured), `DM`, `DMPLEX`, `DMPlexOrient()`, `DMPlexGetCone()`, `DMPlexGetConeOrientation()`, `DMPlexInterpolate()`, `DMPlexGetChart()` 17 @*/ 18 PetscErrorCode DMPlexOrientPoint(DM dm, PetscInt p, PetscInt o) 19 { 20 DMPolytopeType ct; 21 const PetscInt *arr, *cone, *ornt, *support; 22 PetscInt *newcone, *newornt; 23 PetscInt coneSize, c, supportSize, s; 24 25 PetscFunctionBegin; 26 PetscValidHeaderSpecific(dm, DM_CLASSID, 1); 27 PetscCall(DMPlexGetCellType(dm, p, &ct)); 28 arr = DMPolytopeTypeGetArrangement(ct, o); 29 if (!arr) PetscFunctionReturn(PETSC_SUCCESS); 30 PetscCall(DMPlexGetConeSize(dm, p, &coneSize)); 31 PetscCall(DMPlexGetCone(dm, p, &cone)); 32 PetscCall(DMPlexGetConeOrientation(dm, p, &ornt)); 33 PetscCall(DMGetWorkArray(dm, coneSize, MPIU_INT, &newcone)); 34 PetscCall(DMGetWorkArray(dm, coneSize, MPIU_INT, &newornt)); 35 for (c = 0; c < coneSize; ++c) { 36 DMPolytopeType ft; 37 PetscInt nO; 38 39 PetscCall(DMPlexGetCellType(dm, cone[c], &ft)); 40 nO = DMPolytopeTypeGetNumArrangements(ft) / 2; 41 newcone[c] = cone[arr[c * 2 + 0]]; 42 newornt[c] = DMPolytopeTypeComposeOrientation(ft, arr[c * 2 + 1], ornt[arr[c * 2 + 0]]); 43 PetscCheck(!newornt[c] || !(newornt[c] >= nO || newornt[c] < -nO), PETSC_COMM_SELF, PETSC_ERR_PLIB, "Invalid orientation %" PetscInt_FMT " not in [%" PetscInt_FMT ",%" PetscInt_FMT ") for %s %" PetscInt_FMT, newornt[c], -nO, nO, DMPolytopeTypes[ft], cone[c]); 44 } 45 PetscCall(DMPlexSetCone(dm, p, newcone)); 46 PetscCall(DMPlexSetConeOrientation(dm, p, newornt)); 47 PetscCall(DMRestoreWorkArray(dm, coneSize, MPIU_INT, &newcone)); 48 PetscCall(DMRestoreWorkArray(dm, coneSize, MPIU_INT, &newornt)); 49 /* Update orientation of this point in the support points */ 50 PetscCall(DMPlexGetSupportSize(dm, p, &supportSize)); 51 PetscCall(DMPlexGetSupport(dm, p, &support)); 52 for (s = 0; s < supportSize; ++s) { 53 PetscCall(DMPlexGetConeSize(dm, support[s], &coneSize)); 54 PetscCall(DMPlexGetCone(dm, support[s], &cone)); 55 PetscCall(DMPlexGetConeOrientation(dm, support[s], &ornt)); 56 for (c = 0; c < coneSize; ++c) { 57 PetscInt po; 58 59 if (cone[c] != p) continue; 60 /* ornt[c] * 0 = target = po * o so that po = ornt[c] * o^{-1} */ 61 po = DMPolytopeTypeComposeOrientationInv(ct, ornt[c], o); 62 PetscCall(DMPlexInsertConeOrientation(dm, support[s], c, po)); 63 } 64 } 65 PetscFunctionReturn(PETSC_SUCCESS); 66 } 67 68 static PetscInt GetPointIndex(PetscInt point, PetscInt pStart, PetscInt pEnd, const PetscInt points[]) 69 { 70 if (points) { 71 PetscInt loc; 72 73 PetscCallAbort(PETSC_COMM_SELF, PetscFindInt(point, pEnd - pStart, points, &loc)); 74 if (loc >= 0) return loc; 75 } else { 76 if (point >= pStart && point < pEnd) return point - pStart; 77 } 78 return -1; 79 } 80 81 /* 82 - Checks face match 83 - Flips non-matching 84 - Inserts faces of support cells in FIFO 85 */ 86 static PetscErrorCode DMPlexCheckFace_Internal(DM dm, PetscInt *faceFIFO, PetscInt *fTop, PetscInt *fBottom, IS cellIS, IS faceIS, PetscBT seenCells, PetscBT flippedCells, PetscBT seenFaces) 87 { 88 const PetscInt *supp, *coneA, *coneB, *coneOA, *coneOB; 89 PetscInt suppSize, Ns = 0, coneSizeA, coneSizeB, posA = -1, posB = -1; 90 PetscInt face, dim, indC[3], indS[3], seenA, flippedA, seenB, flippedB, mismatch; 91 const PetscInt *cells, *faces; 92 PetscInt cStart, cEnd, fStart, fEnd; 93 94 PetscFunctionBegin; 95 face = faceFIFO[(*fTop)++]; 96 PetscCall(ISGetPointRange(cellIS, &cStart, &cEnd, &cells)); 97 PetscCall(ISGetPointRange(faceIS, &fStart, &fEnd, &faces)); 98 PetscCall(DMPlexGetPointDepth(dm, cells ? cells[cStart] : cStart, &dim)); 99 PetscCall(DMPlexGetSupportSize(dm, face, &suppSize)); 100 PetscCall(DMPlexGetSupport(dm, face, &supp)); 101 // Filter the support 102 for (PetscInt s = 0; s < suppSize; ++s) { 103 // Filter support 104 indC[Ns] = GetPointIndex(supp[s], cStart, cEnd, cells); 105 indS[Ns] = s; 106 if (indC[Ns] >= 0) ++Ns; 107 } 108 if (Ns < 2) PetscFunctionReturn(PETSC_SUCCESS); 109 PetscCheck(Ns == 2, PETSC_COMM_SELF, PETSC_ERR_ARG_WRONG, "Faces should separate only two cells, not %" PetscInt_FMT, Ns); 110 PetscCheck(indC[0] >= 0 && indC[1] >= 0, PETSC_COMM_SELF, PETSC_ERR_ARG_WRONG, "Support cells %" PetscInt_FMT " (%" PetscInt_FMT ") and %" PetscInt_FMT " (%" PetscInt_FMT ") are not both valid", supp[0], indC[0], supp[1], indC[1]); 111 seenA = PetscBTLookup(seenCells, indC[0]); 112 flippedA = PetscBTLookup(flippedCells, indC[0]) ? 1 : 0; 113 seenB = PetscBTLookup(seenCells, indC[1]); 114 flippedB = PetscBTLookup(flippedCells, indC[1]) ? 1 : 0; 115 116 PetscCall(DMPlexGetConeSize(dm, supp[indS[0]], &coneSizeA)); 117 PetscCall(DMPlexGetConeSize(dm, supp[indS[1]], &coneSizeB)); 118 PetscCall(DMPlexGetCone(dm, supp[indS[0]], &coneA)); 119 PetscCall(DMPlexGetCone(dm, supp[indS[1]], &coneB)); 120 PetscCall(DMPlexGetConeOrientation(dm, supp[indS[0]], &coneOA)); 121 PetscCall(DMPlexGetConeOrientation(dm, supp[indS[1]], &coneOB)); 122 for (PetscInt c = 0; c < coneSizeA; ++c) { 123 const PetscInt indF = GetPointIndex(coneA[c], fStart, fEnd, faces); 124 125 // Filter cone 126 if (indF < 0) continue; 127 if (!PetscBTLookup(seenFaces, indF)) { 128 faceFIFO[(*fBottom)++] = coneA[c]; 129 PetscCall(PetscBTSet(seenFaces, indF)); 130 } 131 if (coneA[c] == face) posA = c; 132 PetscCheck(*fBottom <= fEnd - fStart, PETSC_COMM_SELF, PETSC_ERR_PLIB, "Face %" PetscInt_FMT " was pushed exceeding capacity %" PetscInt_FMT " > %" PetscInt_FMT, coneA[c], *fBottom, fEnd - fStart); 133 } 134 PetscCheck(posA >= 0, PETSC_COMM_SELF, PETSC_ERR_ARG_WRONG, "Face %" PetscInt_FMT " could not be located in cell %" PetscInt_FMT, face, supp[indS[0]]); 135 for (PetscInt c = 0; c < coneSizeB; ++c) { 136 const PetscInt indF = GetPointIndex(coneB[c], fStart, fEnd, faces); 137 138 // Filter cone 139 if (indF < 0) continue; 140 if (!PetscBTLookup(seenFaces, indF)) { 141 faceFIFO[(*fBottom)++] = coneB[c]; 142 PetscCall(PetscBTSet(seenFaces, indF)); 143 } 144 if (coneB[c] == face) posB = c; 145 PetscCheck(*fBottom <= fEnd - fStart, PETSC_COMM_SELF, PETSC_ERR_PLIB, "Face %" PetscInt_FMT " was pushed exceeding capacity %" PetscInt_FMT " > %" PetscInt_FMT, coneA[c], *fBottom, fEnd - fStart); 146 } 147 PetscCheck(posB >= 0, PETSC_COMM_SELF, PETSC_ERR_ARG_WRONG, "Face %" PetscInt_FMT " could not be located in cell %" PetscInt_FMT, face, supp[indS[1]]); 148 149 if (dim == 1) { 150 mismatch = posA == posB; 151 } else { 152 mismatch = coneOA[posA] == coneOB[posB]; 153 } 154 155 if (mismatch ^ (flippedA ^ flippedB)) { 156 PetscCheck(!seenA || !seenB, PETSC_COMM_SELF, PETSC_ERR_ARG_WRONG, "Previously seen cells %" PetscInt_FMT " and %" PetscInt_FMT " do not match: Fault mesh is non-orientable", supp[indS[0]], supp[indS[1]]); 157 if (!seenA && !flippedA) { 158 PetscCall(PetscBTSet(flippedCells, indC[0])); 159 } else if (!seenB && !flippedB) { 160 PetscCall(PetscBTSet(flippedCells, indC[1])); 161 } else SETERRQ(PETSC_COMM_SELF, PETSC_ERR_ARG_WRONG, "Inconsistent mesh orientation: Fault mesh is non-orientable"); 162 } else PetscCheck(!mismatch || !flippedA || !flippedB, PETSC_COMM_SELF, PETSC_ERR_ARG_WRONG, "Attempt to flip already flipped cell: Fault mesh is non-orientable"); 163 PetscCall(PetscBTSet(seenCells, indC[0])); 164 PetscCall(PetscBTSet(seenCells, indC[1])); 165 PetscFunctionReturn(PETSC_SUCCESS); 166 } 167 168 static PetscErrorCode DMPlexCheckFace_Old_Internal(DM dm, PetscInt *faceFIFO, PetscInt *fTop, PetscInt *fBottom, PetscInt cStart, PetscInt fStart, PetscInt fEnd, PetscBT seenCells, PetscBT flippedCells, PetscBT seenFaces) 169 { 170 const PetscInt *support, *coneA, *coneB, *coneOA, *coneOB; 171 PetscInt supportSize, coneSizeA, coneSizeB, posA = -1, posB = -1; 172 PetscInt face, dim, seenA, flippedA, seenB, flippedB, mismatch, c; 173 174 PetscFunctionBegin; 175 face = faceFIFO[(*fTop)++]; 176 PetscCall(DMGetDimension(dm, &dim)); 177 PetscCall(DMPlexGetSupportSize(dm, face, &supportSize)); 178 PetscCall(DMPlexGetSupport(dm, face, &support)); 179 if (supportSize < 2) PetscFunctionReturn(PETSC_SUCCESS); 180 PetscCheck(supportSize == 2, PETSC_COMM_SELF, PETSC_ERR_ARG_WRONG, "Faces should separate only two cells, not %" PetscInt_FMT, supportSize); 181 seenA = PetscBTLookup(seenCells, support[0] - cStart); 182 flippedA = PetscBTLookup(flippedCells, support[0] - cStart) ? 1 : 0; 183 seenB = PetscBTLookup(seenCells, support[1] - cStart); 184 flippedB = PetscBTLookup(flippedCells, support[1] - cStart) ? 1 : 0; 185 186 PetscCall(DMPlexGetConeSize(dm, support[0], &coneSizeA)); 187 PetscCall(DMPlexGetConeSize(dm, support[1], &coneSizeB)); 188 PetscCall(DMPlexGetCone(dm, support[0], &coneA)); 189 PetscCall(DMPlexGetCone(dm, support[1], &coneB)); 190 PetscCall(DMPlexGetConeOrientation(dm, support[0], &coneOA)); 191 PetscCall(DMPlexGetConeOrientation(dm, support[1], &coneOB)); 192 for (c = 0; c < coneSizeA; ++c) { 193 if (!PetscBTLookup(seenFaces, coneA[c] - fStart)) { 194 faceFIFO[(*fBottom)++] = coneA[c]; 195 PetscCall(PetscBTSet(seenFaces, coneA[c] - fStart)); 196 } 197 if (coneA[c] == face) posA = c; 198 PetscCheck(*fBottom <= fEnd - fStart, PETSC_COMM_SELF, PETSC_ERR_PLIB, "Face %" PetscInt_FMT " was pushed exceeding capacity %" PetscInt_FMT " > %" PetscInt_FMT, coneA[c], *fBottom, fEnd - fStart); 199 } 200 PetscCheck(posA >= 0, PETSC_COMM_SELF, PETSC_ERR_ARG_WRONG, "Face %" PetscInt_FMT " could not be located in cell %" PetscInt_FMT, face, support[0]); 201 for (c = 0; c < coneSizeB; ++c) { 202 if (!PetscBTLookup(seenFaces, coneB[c] - fStart)) { 203 faceFIFO[(*fBottom)++] = coneB[c]; 204 PetscCall(PetscBTSet(seenFaces, coneB[c] - fStart)); 205 } 206 if (coneB[c] == face) posB = c; 207 PetscCheck(*fBottom <= fEnd - fStart, PETSC_COMM_SELF, PETSC_ERR_PLIB, "Face %" PetscInt_FMT " was pushed exceeding capacity %" PetscInt_FMT " > %" PetscInt_FMT, coneA[c], *fBottom, fEnd - fStart); 208 } 209 PetscCheck(posB >= 0, PETSC_COMM_SELF, PETSC_ERR_ARG_WRONG, "Face %" PetscInt_FMT " could not be located in cell %" PetscInt_FMT, face, support[1]); 210 211 if (dim == 1) { 212 mismatch = posA == posB; 213 } else { 214 mismatch = coneOA[posA] == coneOB[posB]; 215 } 216 217 if (mismatch ^ (flippedA ^ flippedB)) { 218 PetscCheck(!seenA || !seenB, PETSC_COMM_SELF, PETSC_ERR_ARG_WRONG, "Previously seen cells %" PetscInt_FMT " and %" PetscInt_FMT " do not match: Fault mesh is non-orientable", support[0], support[1]); 219 if (!seenA && !flippedA) { 220 PetscCall(PetscBTSet(flippedCells, support[0] - cStart)); 221 } else if (!seenB && !flippedB) { 222 PetscCall(PetscBTSet(flippedCells, support[1] - cStart)); 223 } else SETERRQ(PETSC_COMM_SELF, PETSC_ERR_ARG_WRONG, "Inconsistent mesh orientation: Fault mesh is non-orientable"); 224 } else PetscCheck(!mismatch || !flippedA || !flippedB, PETSC_COMM_SELF, PETSC_ERR_ARG_WRONG, "Attempt to flip already flipped cell: Fault mesh is non-orientable"); 225 PetscCall(PetscBTSet(seenCells, support[0] - cStart)); 226 PetscCall(PetscBTSet(seenCells, support[1] - cStart)); 227 PetscFunctionReturn(PETSC_SUCCESS); 228 } 229 230 /* 231 DMPlexOrient_Serial - Compute valid orientation for local connected components 232 233 Not collective 234 235 Input Parameters: 236 + dm - The `DM` 237 - cellHeight - The height of k-cells to be oriented 238 239 Output Parameters: 240 + Ncomp - The number of connected component 241 . cellComp - The connected component for each local cell 242 . faceComp - The connected component for each local face 243 - flippedCells - Marked cells should be inverted 244 245 Level: developer 246 247 .seealso: `DMPlexOrient()` 248 */ 249 static PetscErrorCode DMPlexOrient_Serial(DM dm, IS cellIS, IS faceIS, PetscInt *Ncomp, PetscInt cellComp[], PetscInt faceComp[], PetscBT flippedCells) 250 { 251 PetscBT seenCells, seenFaces; 252 PetscInt *faceFIFO; 253 const PetscInt *cells = NULL, *faces = NULL; 254 PetscInt cStart = 0, cEnd = 0, fStart = 0, fEnd = 0; 255 256 PetscFunctionBegin; 257 if (cellIS) PetscCall(ISGetPointRange(cellIS, &cStart, &cEnd, &cells)); 258 if (faceIS) PetscCall(ISGetPointRange(faceIS, &fStart, &fEnd, &faces)); 259 PetscCall(PetscBTCreate(cEnd - cStart, &seenCells)); 260 PetscCall(PetscBTMemzero(cEnd - cStart, seenCells)); 261 PetscCall(PetscBTCreate(fEnd - fStart, &seenFaces)); 262 PetscCall(PetscBTMemzero(fEnd - fStart, seenFaces)); 263 PetscCall(PetscMalloc1(fEnd - fStart, &faceFIFO)); 264 *Ncomp = 0; 265 for (PetscInt c = 0; c < cEnd - cStart; ++c) cellComp[c] = -1; 266 do { 267 PetscInt cc, fTop, fBottom; 268 269 // Look for first unmarked cell 270 for (cc = cStart; cc < cEnd; ++cc) 271 if (cellComp[cc - cStart] < 0) break; 272 if (cc >= cEnd) break; 273 // Initialize FIFO with first cell in component 274 { 275 const PetscInt cell = cells ? cells[cc] : cc; 276 const PetscInt *cone; 277 PetscInt coneSize; 278 279 fTop = fBottom = 0; 280 PetscCall(DMPlexGetConeSize(dm, cell, &coneSize)); 281 PetscCall(DMPlexGetCone(dm, cell, &cone)); 282 for (PetscInt c = 0; c < coneSize; ++c) { 283 // Cell faces are guaranteed to be in the face set 284 faceFIFO[fBottom++] = cone[c]; 285 PetscCall(PetscBTSet(seenFaces, GetPointIndex(cone[c], fStart, fEnd, faces))); 286 } 287 PetscCall(PetscBTSet(seenCells, cc - cStart)); 288 } 289 // Consider each face in FIFO 290 while (fTop < fBottom) PetscCall(DMPlexCheckFace_Internal(dm, faceFIFO, &fTop, &fBottom, cellIS, faceIS, seenCells, flippedCells, seenFaces)); 291 // Set component for cells and faces 292 for (PetscInt c = 0; c < cEnd - cStart; ++c) { 293 if (PetscBTLookup(seenCells, c)) cellComp[c] = *Ncomp; 294 } 295 for (PetscInt f = 0; f < fEnd - fStart; ++f) { 296 if (PetscBTLookup(seenFaces, f)) faceComp[f] = *Ncomp; 297 } 298 // Wipe seenCells and seenFaces for next component 299 PetscCall(PetscBTMemzero(fEnd - fStart, seenFaces)); 300 PetscCall(PetscBTMemzero(cEnd - cStart, seenCells)); 301 ++(*Ncomp); 302 } while (1); 303 PetscCall(PetscBTDestroy(&seenCells)); 304 PetscCall(PetscBTDestroy(&seenFaces)); 305 PetscCall(PetscFree(faceFIFO)); 306 PetscFunctionReturn(PETSC_SUCCESS); 307 } 308 309 /*@ 310 DMPlexOrient - Give a consistent orientation to the input mesh 311 312 Input Parameter: 313 . dm - The `DM` 314 315 Note: 316 The orientation data for the `DM` are change in-place. 317 318 This routine will fail for non-orientable surfaces, such as the Moebius strip. 319 320 Level: advanced 321 322 .seealso: [](ch_unstructured), `DM`, `DMPLEX`, `DMCreate()` 323 @*/ 324 PetscErrorCode DMPlexOrient(DM dm) 325 { 326 #if 0 327 IS cellIS, faceIS; 328 329 PetscFunctionBegin; 330 PetscCall(DMPlexGetAllCells_Internal(dm, &cellIS)); 331 PetscCall(DMPlexGetAllFaces_Internal(dm, &faceIS)); 332 PetscCall(DMPlexOrientCells_Internal(dm, cellIS, faceIS)); 333 PetscCall(ISDestroy(&cellIS)); 334 PetscCall(ISDestroy(&faceIS)); 335 PetscFunctionReturn(PETSC_SUCCESS); 336 #else 337 MPI_Comm comm; 338 PetscSF sf; 339 const PetscInt *lpoints; 340 const PetscSFNode *rpoints; 341 PetscSFNode *rorntComp = NULL, *lorntComp = NULL; 342 PetscInt *numNeighbors, **neighbors, *locSupport = NULL; 343 PetscSFNode *nrankComp; 344 PetscBool *match, *flipped; 345 PetscBT seenCells, flippedCells, seenFaces; 346 PetscInt *faceFIFO, fTop, fBottom, *cellComp, *faceComp; 347 PetscInt numLeaves, numRoots, dim, h, cStart, cEnd, c, cell, fStart, fEnd, face, off, totNeighbors = 0; 348 PetscMPIInt rank, size, numComponents, comp = 0; 349 PetscBool flg, flg2; 350 PetscViewer viewer = NULL, selfviewer = NULL; 351 352 PetscFunctionBegin; 353 PetscCall(PetscObjectGetComm((PetscObject)dm, &comm)); 354 PetscCallMPI(MPI_Comm_rank(comm, &rank)); 355 PetscCallMPI(MPI_Comm_size(comm, &size)); 356 PetscCall(PetscOptionsHasName(((PetscObject)dm)->options, ((PetscObject)dm)->prefix, "-orientation_view", &flg)); 357 PetscCall(PetscOptionsHasName(((PetscObject)dm)->options, ((PetscObject)dm)->prefix, "-orientation_view_synchronized", &flg2)); 358 PetscCall(DMGetPointSF(dm, &sf)); 359 PetscCall(PetscSFGetGraph(sf, &numRoots, &numLeaves, &lpoints, &rpoints)); 360 /* Truth Table 361 mismatch flips do action mismatch flipA ^ flipB action 362 F 0 flips no F F F 363 F 1 flip yes F T T 364 F 2 flips no T F T 365 T 0 flips yes T T F 366 T 1 flip no 367 T 2 flips yes 368 */ 369 PetscCall(DMGetDimension(dm, &dim)); 370 PetscCall(DMPlexGetVTKCellHeight(dm, &h)); 371 PetscCall(DMPlexGetHeightStratum(dm, h, &cStart, &cEnd)); 372 PetscCall(DMPlexGetHeightStratum(dm, h + 1, &fStart, &fEnd)); 373 PetscCall(PetscBTCreate(cEnd - cStart, &seenCells)); 374 PetscCall(PetscBTMemzero(cEnd - cStart, seenCells)); 375 PetscCall(PetscBTCreate(cEnd - cStart, &flippedCells)); 376 PetscCall(PetscBTMemzero(cEnd - cStart, flippedCells)); 377 PetscCall(PetscBTCreate(fEnd - fStart, &seenFaces)); 378 PetscCall(PetscBTMemzero(fEnd - fStart, seenFaces)); 379 PetscCall(PetscCalloc3(fEnd - fStart, &faceFIFO, cEnd - cStart, &cellComp, fEnd - fStart, &faceComp)); 380 /* 381 OLD STYLE 382 - Add an integer array over cells and faces (component) for connected component number 383 Foreach component 384 - Mark the initial cell as seen 385 - Process component as usual 386 - Set component for all seenCells 387 - Wipe seenCells and seenFaces (flippedCells can stay) 388 - Generate parallel adjacency for component using SF and seenFaces 389 - Collect numComponents adj data from each proc to 0 390 - Build same serial graph 391 - Use same solver 392 - Use Scatterv to send back flipped flags for each component 393 - Negate flippedCells by component 394 395 NEW STYLE 396 - Create the adj on each process 397 - Bootstrap to complete graph on proc 0 398 */ 399 /* Loop over components */ 400 for (cell = cStart; cell < cEnd; ++cell) cellComp[cell - cStart] = -1; 401 do { 402 /* Look for first unmarked cell */ 403 for (cell = cStart; cell < cEnd; ++cell) 404 if (cellComp[cell - cStart] < 0) break; 405 if (cell >= cEnd) break; 406 /* Initialize FIFO with first cell in component */ 407 { 408 const PetscInt *cone; 409 PetscInt coneSize; 410 411 fTop = fBottom = 0; 412 PetscCall(DMPlexGetConeSize(dm, cell, &coneSize)); 413 PetscCall(DMPlexGetCone(dm, cell, &cone)); 414 for (c = 0; c < coneSize; ++c) { 415 faceFIFO[fBottom++] = cone[c]; 416 PetscCall(PetscBTSet(seenFaces, cone[c] - fStart)); 417 } 418 PetscCall(PetscBTSet(seenCells, cell - cStart)); 419 } 420 /* Consider each face in FIFO */ 421 while (fTop < fBottom) PetscCall(DMPlexCheckFace_Old_Internal(dm, faceFIFO, &fTop, &fBottom, cStart, fStart, fEnd, seenCells, flippedCells, seenFaces)); 422 /* Set component for cells and faces */ 423 for (cell = 0; cell < cEnd - cStart; ++cell) { 424 if (PetscBTLookup(seenCells, cell)) cellComp[cell] = comp; 425 } 426 for (face = 0; face < fEnd - fStart; ++face) { 427 if (PetscBTLookup(seenFaces, face)) faceComp[face] = comp; 428 } 429 /* Wipe seenCells and seenFaces for next component */ 430 PetscCall(PetscBTMemzero(fEnd - fStart, seenFaces)); 431 PetscCall(PetscBTMemzero(cEnd - cStart, seenCells)); 432 ++comp; 433 } while (1); 434 numComponents = comp; 435 if (flg) { 436 PetscViewer v; 437 438 PetscCall(PetscViewerASCIIGetStdout(comm, &v)); 439 PetscCall(PetscViewerASCIIPushSynchronized(v)); 440 PetscCall(PetscViewerASCIISynchronizedPrintf(v, "[%d]BT for serial flipped cells:\n", rank)); 441 PetscCall(PetscBTView(cEnd - cStart, flippedCells, v)); 442 PetscCall(PetscViewerFlush(v)); 443 PetscCall(PetscViewerASCIIPopSynchronized(v)); 444 } 445 /* Now all subdomains are oriented, but we need a consistent parallel orientation */ 446 if (numLeaves >= 0) { 447 PetscInt maxSupportSize, neighbor; 448 449 /* Store orientations of boundary faces*/ 450 PetscCall(DMPlexGetMaxSizes(dm, NULL, &maxSupportSize)); 451 PetscCall(PetscCalloc3(numRoots, &rorntComp, numRoots, &lorntComp, maxSupportSize, &locSupport)); 452 for (face = fStart; face < fEnd; ++face) { 453 const PetscInt *cone, *support, *ornt; 454 PetscInt coneSize, supportSize, Ns = 0, s, l; 455 456 PetscCall(DMPlexGetSupportSize(dm, face, &supportSize)); 457 /* Ignore overlapping cells */ 458 PetscCall(DMPlexGetSupport(dm, face, &support)); 459 for (s = 0; s < supportSize; ++s) { 460 PetscCall(PetscFindInt(support[s], numLeaves, lpoints, &l)); 461 if (l >= 0) continue; 462 locSupport[Ns++] = support[s]; 463 } 464 if (Ns != 1) continue; 465 neighbor = locSupport[0]; 466 PetscCall(DMPlexGetCone(dm, neighbor, &cone)); 467 PetscCall(DMPlexGetConeSize(dm, neighbor, &coneSize)); 468 PetscCall(DMPlexGetConeOrientation(dm, neighbor, &ornt)); 469 for (c = 0; c < coneSize; ++c) 470 if (cone[c] == face) break; 471 if (dim == 1) { 472 /* Use cone position instead, shifted to -1 or 1 */ 473 if (PetscBTLookup(flippedCells, neighbor - cStart)) rorntComp[face].rank = (PetscMPIInt)(1 - c * 2); 474 else rorntComp[face].rank = (PetscMPIInt)(c * 2 - 1); 475 } else { 476 if (PetscBTLookup(flippedCells, neighbor - cStart)) rorntComp[face].rank = ornt[c] < 0 ? -1 : 1; 477 else rorntComp[face].rank = ornt[c] < 0 ? 1 : -1; 478 } 479 rorntComp[face].index = faceComp[face - fStart]; 480 } 481 /* Communicate boundary edge orientations */ 482 PetscCall(PetscSFBcastBegin(sf, MPIU_SF_NODE, rorntComp, lorntComp, MPI_REPLACE)); 483 PetscCall(PetscSFBcastEnd(sf, MPIU_SF_NODE, rorntComp, lorntComp, MPI_REPLACE)); 484 } 485 /* Get process adjacency */ 486 PetscCall(PetscMalloc2(numComponents, &numNeighbors, numComponents, &neighbors)); 487 viewer = PETSC_VIEWER_STDOUT_(PetscObjectComm((PetscObject)dm)); 488 if (flg2) PetscCall(PetscViewerASCIIPushSynchronized(viewer)); 489 PetscCall(PetscViewerGetSubViewer(viewer, PETSC_COMM_SELF, &selfviewer)); 490 for (comp = 0; comp < numComponents; ++comp) { 491 PetscInt l, n; 492 493 numNeighbors[comp] = 0; 494 PetscCall(PetscMalloc1(PetscMax(numLeaves, 0), &neighbors[comp])); 495 /* I know this is p^2 time in general, but for bounded degree its alright */ 496 for (l = 0; l < numLeaves; ++l) { 497 const PetscInt face = lpoints[l]; 498 499 /* Find a representative face (edge) separating pairs of procs */ 500 if ((face >= fStart) && (face < fEnd) && (faceComp[face - fStart] == comp) && rorntComp[face].rank) { 501 const PetscMPIInt rrank = (PetscMPIInt)rpoints[l].rank; 502 const PetscInt rcomp = lorntComp[face].index; 503 504 for (n = 0; n < numNeighbors[comp]; ++n) 505 if ((rrank == rpoints[neighbors[comp][n]].rank) && (rcomp == lorntComp[lpoints[neighbors[comp][n]]].index)) break; 506 if (n >= numNeighbors[comp]) { 507 PetscInt supportSize; 508 509 PetscCall(DMPlexGetSupportSize(dm, face, &supportSize)); 510 PetscCheck(supportSize == 1, PETSC_COMM_SELF, PETSC_ERR_ARG_WRONG, "Boundary faces should see one cell, not %" PetscInt_FMT, supportSize); 511 if (flg) 512 PetscCall(PetscViewerASCIIPrintf(selfviewer, "[%d]: component %d, Found representative leaf %" PetscInt_FMT " (face %" PetscInt_FMT ") connecting to face %" PetscInt_FMT " on (%d, %" PetscInt_FMT ") with orientation %d\n", rank, comp, l, face, 513 rpoints[l].index, rrank, rcomp, (PetscMPIInt)lorntComp[face].rank)); 514 neighbors[comp][numNeighbors[comp]++] = l; 515 } 516 } 517 } 518 totNeighbors += numNeighbors[comp]; 519 } 520 PetscCall(PetscViewerRestoreSubViewer(viewer, PETSC_COMM_SELF, &selfviewer)); 521 if (flg2) PetscCall(PetscViewerASCIIPopSynchronized(viewer)); 522 PetscCall(PetscMalloc2(totNeighbors, &nrankComp, totNeighbors, &match)); 523 for (comp = 0, off = 0; comp < numComponents; ++comp) { 524 PetscInt n; 525 526 for (n = 0; n < numNeighbors[comp]; ++n, ++off) { 527 const PetscInt face = lpoints[neighbors[comp][n]]; 528 const PetscInt o = rorntComp[face].rank * lorntComp[face].rank; 529 530 if (o < 0) match[off] = PETSC_TRUE; 531 else if (o > 0) match[off] = PETSC_FALSE; 532 else SETERRQ(PETSC_COMM_SELF, PETSC_ERR_ARG_WRONG, "Invalid face %" PetscInt_FMT " (%d, %d) neighbor: %" PetscInt_FMT " comp: %d", face, (PetscMPIInt)rorntComp[face].rank, (PetscMPIInt)lorntComp[face].rank, neighbors[comp][n], comp); 533 nrankComp[off].rank = rpoints[neighbors[comp][n]].rank; 534 nrankComp[off].index = lorntComp[lpoints[neighbors[comp][n]]].index; 535 } 536 PetscCall(PetscFree(neighbors[comp])); 537 } 538 /* Collect the graph on 0 */ 539 if (numLeaves >= 0) { 540 Mat G; 541 PetscBT seenProcs, flippedProcs; 542 PetscInt *procFIFO, pTop, pBottom; 543 PetscInt *N = NULL, *Noff; 544 PetscSFNode *adj = NULL; 545 PetscBool *val = NULL; 546 PetscMPIInt *recvcounts = NULL, *displs = NULL, *Nc, p, o, itotNeighbors; 547 PetscMPIInt size = 0; 548 549 PetscCall(PetscCalloc1(numComponents, &flipped)); 550 if (rank == 0) PetscCallMPI(MPI_Comm_size(comm, &size)); 551 PetscCall(PetscCalloc4(size, &recvcounts, size + 1, &displs, size, &Nc, size + 1, &Noff)); 552 PetscCallMPI(MPI_Gather(&numComponents, 1, MPI_INT, Nc, 1, MPI_INT, 0, comm)); 553 for (p = 0; p < size; ++p) displs[p + 1] = displs[p] + Nc[p]; 554 if (rank == 0) PetscCall(PetscMalloc1(displs[size], &N)); 555 PetscCallMPI(MPI_Gatherv(numNeighbors, numComponents, MPIU_INT, N, Nc, displs, MPIU_INT, 0, comm)); 556 for (p = 0, o = 0; p < size; ++p) { 557 recvcounts[p] = 0; 558 for (c = 0; c < Nc[p]; ++c, ++o) recvcounts[p] += N[o]; 559 displs[p + 1] = displs[p] + recvcounts[p]; 560 } 561 if (rank == 0) PetscCall(PetscMalloc2(displs[size], &adj, displs[size], &val)); 562 PetscCall(PetscMPIIntCast(totNeighbors, &itotNeighbors)); 563 PetscCallMPI(MPI_Gatherv(nrankComp, itotNeighbors, MPIU_SF_NODE, adj, recvcounts, displs, MPIU_SF_NODE, 0, comm)); 564 PetscCallMPI(MPI_Gatherv(match, itotNeighbors, MPIU_BOOL, val, recvcounts, displs, MPIU_BOOL, 0, comm)); 565 PetscCall(PetscFree2(numNeighbors, neighbors)); 566 if (rank == 0) { 567 for (p = 1; p <= size; ++p) Noff[p] = Noff[p - 1] + Nc[p - 1]; 568 if (flg) { 569 PetscInt n; 570 571 for (p = 0, off = 0; p < size; ++p) { 572 for (c = 0; c < Nc[p]; ++c) { 573 PetscCall(PetscPrintf(PETSC_COMM_SELF, "Proc %d Comp %" PetscInt_FMT ":\n", p, c)); 574 for (n = 0; n < N[Noff[p] + c]; ++n, ++off) PetscCall(PetscPrintf(PETSC_COMM_SELF, " edge (%d, %" PetscInt_FMT ") (%s):\n", (PetscMPIInt)adj[off].rank, adj[off].index, PetscBools[val[off]])); 575 } 576 } 577 } 578 /* Symmetrize the graph */ 579 PetscCall(MatCreate(PETSC_COMM_SELF, &G)); 580 PetscCall(MatSetSizes(G, Noff[size], Noff[size], Noff[size], Noff[size])); 581 PetscCall(MatSetUp(G)); 582 for (p = 0, off = 0; p < size; ++p) { 583 for (c = 0; c < Nc[p]; ++c) { 584 const PetscInt r = Noff[p] + c; 585 PetscInt n; 586 587 for (n = 0; n < N[r]; ++n, ++off) { 588 const PetscInt q = Noff[adj[off].rank] + adj[off].index; 589 const PetscScalar o = val[off] ? 1.0 : 0.0; 590 591 PetscCall(MatSetValues(G, 1, &r, 1, &q, &o, INSERT_VALUES)); 592 PetscCall(MatSetValues(G, 1, &q, 1, &r, &o, INSERT_VALUES)); 593 } 594 } 595 } 596 PetscCall(MatAssemblyBegin(G, MAT_FINAL_ASSEMBLY)); 597 PetscCall(MatAssemblyEnd(G, MAT_FINAL_ASSEMBLY)); 598 599 PetscCall(PetscBTCreate(Noff[size], &seenProcs)); 600 PetscCall(PetscBTMemzero(Noff[size], seenProcs)); 601 PetscCall(PetscBTCreate(Noff[size], &flippedProcs)); 602 PetscCall(PetscBTMemzero(Noff[size], flippedProcs)); 603 PetscCall(PetscMalloc1(Noff[size], &procFIFO)); 604 pTop = pBottom = 0; 605 for (p = 0; p < Noff[size]; ++p) { 606 if (PetscBTLookup(seenProcs, p)) continue; 607 /* Initialize FIFO with next proc */ 608 procFIFO[pBottom++] = p; 609 PetscCall(PetscBTSet(seenProcs, p)); 610 /* Consider each proc in FIFO */ 611 while (pTop < pBottom) { 612 const PetscScalar *ornt; 613 const PetscInt *neighbors; 614 PetscInt proc, nproc, seen, flippedA, flippedB, mismatch, numNeighbors, n; 615 616 proc = procFIFO[pTop++]; 617 flippedA = PetscBTLookup(flippedProcs, proc) ? 1 : 0; 618 PetscCall(MatGetRow(G, proc, &numNeighbors, &neighbors, &ornt)); 619 /* Loop over neighboring procs */ 620 for (n = 0; n < numNeighbors; ++n) { 621 nproc = neighbors[n]; 622 mismatch = PetscRealPart(ornt[n]) > 0.5 ? 0 : 1; 623 seen = PetscBTLookup(seenProcs, nproc); 624 flippedB = PetscBTLookup(flippedProcs, nproc) ? 1 : 0; 625 626 if (mismatch ^ (flippedA ^ flippedB)) { 627 PetscCheck(!seen, PETSC_COMM_SELF, PETSC_ERR_ARG_WRONG, "Previously seen procs %" PetscInt_FMT " and %" PetscInt_FMT " do not match: Fault mesh is non-orientable", proc, nproc); 628 if (!flippedB) { 629 PetscCall(PetscBTSet(flippedProcs, nproc)); 630 } else SETERRQ(PETSC_COMM_SELF, PETSC_ERR_ARG_WRONG, "Inconsistent mesh orientation: Fault mesh is non-orientable"); 631 } else PetscCheck(!mismatch || !flippedA || !flippedB, PETSC_COMM_SELF, PETSC_ERR_ARG_WRONG, "Attempt to flip already flipped cell: Fault mesh is non-orientable"); 632 if (!seen) { 633 procFIFO[pBottom++] = nproc; 634 PetscCall(PetscBTSet(seenProcs, nproc)); 635 } 636 } 637 } 638 } 639 PetscCall(PetscFree(procFIFO)); 640 PetscCall(MatDestroy(&G)); 641 PetscCall(PetscFree2(adj, val)); 642 PetscCall(PetscBTDestroy(&seenProcs)); 643 } 644 /* Scatter flip flags */ 645 { 646 PetscBool *flips = NULL; 647 648 if (rank == 0) { 649 PetscCall(PetscMalloc1(Noff[size], &flips)); 650 for (p = 0; p < Noff[size]; ++p) { 651 flips[p] = PetscBTLookup(flippedProcs, p) ? PETSC_TRUE : PETSC_FALSE; 652 if (flg && flips[p]) PetscCall(PetscPrintf(comm, "Flipping Proc+Comp %d:\n", p)); 653 } 654 for (p = 0; p < size; ++p) displs[p + 1] = displs[p] + Nc[p]; 655 } 656 PetscCallMPI(MPI_Scatterv(flips, Nc, displs, MPIU_BOOL, flipped, numComponents, MPIU_BOOL, 0, comm)); 657 PetscCall(PetscFree(flips)); 658 } 659 if (rank == 0) PetscCall(PetscBTDestroy(&flippedProcs)); 660 PetscCall(PetscFree(N)); 661 PetscCall(PetscFree4(recvcounts, displs, Nc, Noff)); 662 PetscCall(PetscFree2(nrankComp, match)); 663 664 /* Decide whether to flip cells in each component */ 665 for (c = 0; c < cEnd - cStart; ++c) { 666 if (flipped[cellComp[c]]) PetscCall(PetscBTNegate(flippedCells, c)); 667 } 668 PetscCall(PetscFree(flipped)); 669 } 670 if (flg) { 671 PetscViewer v; 672 673 PetscCall(PetscViewerASCIIGetStdout(comm, &v)); 674 PetscCall(PetscViewerASCIIPushSynchronized(v)); 675 PetscCall(PetscViewerASCIISynchronizedPrintf(v, "[%d]BT for parallel flipped cells:\n", rank)); 676 PetscCall(PetscBTView(cEnd - cStart, flippedCells, v)); 677 PetscCall(PetscViewerFlush(v)); 678 PetscCall(PetscViewerASCIIPopSynchronized(v)); 679 } 680 /* Reverse flipped cells in the mesh */ 681 for (c = cStart; c < cEnd; ++c) { 682 if (PetscBTLookup(flippedCells, c - cStart)) PetscCall(DMPlexOrientPoint(dm, c, -1)); 683 } 684 PetscCall(PetscBTDestroy(&seenCells)); 685 PetscCall(PetscBTDestroy(&flippedCells)); 686 PetscCall(PetscBTDestroy(&seenFaces)); 687 PetscCall(PetscFree2(numNeighbors, neighbors)); 688 PetscCall(PetscFree3(rorntComp, lorntComp, locSupport)); 689 PetscCall(PetscFree3(faceFIFO, cellComp, faceComp)); 690 PetscFunctionReturn(PETSC_SUCCESS); 691 #endif 692 } 693 694 static PetscErrorCode CreateCellAndFaceIS_Private(DM dm, DMLabel label, IS *cellIS, IS *faceIS) 695 { 696 IS valueIS; 697 const PetscInt *values; 698 PetscInt Nv, depth = 0; 699 700 PetscFunctionBegin; 701 PetscCall(DMLabelGetValueIS(label, &valueIS)); 702 PetscCall(ISGetLocalSize(valueIS, &Nv)); 703 PetscCall(ISGetIndices(valueIS, &values)); 704 for (PetscInt v = 0; v < Nv; ++v) { 705 const PetscInt val = values[v] < 0 || values[v] >= 100 ? 0 : values[v]; 706 PetscInt n; 707 708 PetscCall(DMLabelGetStratumSize(label, val, &n)); 709 if (!n) continue; 710 depth = PetscMax(val, depth); 711 } 712 PetscCall(ISDestroy(&valueIS)); 713 PetscCheck(depth >= 1 || !Nv, PETSC_COMM_SELF, PETSC_ERR_ARG_WRONG, "Depth for interface must be at least 1, not %" PetscInt_FMT, depth); 714 PetscCall(DMLabelGetStratumIS(label, depth, cellIS)); 715 PetscCall(DMLabelGetStratumIS(label, depth - 1, faceIS)); 716 if (!*cellIS) PetscCall(ISCreateStride(PETSC_COMM_SELF, 0, 0, 1, cellIS)); 717 if (!*faceIS) PetscCall(ISCreateStride(PETSC_COMM_SELF, 0, 0, 1, faceIS)); 718 PetscFunctionReturn(PETSC_SUCCESS); 719 } 720 721 PetscErrorCode DMPlexOrientLabel(DM dm, DMLabel label) 722 { 723 IS cellIS, faceIS; 724 725 PetscFunctionBegin; 726 PetscCall(CreateCellAndFaceIS_Private(dm, label, &cellIS, &faceIS)); 727 PetscCall(DMPlexOrientCells_Internal(dm, cellIS, faceIS)); 728 PetscCall(ISDestroy(&cellIS)); 729 PetscCall(ISDestroy(&faceIS)); 730 PetscFunctionReturn(PETSC_SUCCESS); 731 } 732 733 PetscErrorCode DMPlexOrientCells_Internal(DM dm, IS cellIS, IS faceIS) 734 { 735 MPI_Comm comm; 736 PetscSF sf; 737 const PetscInt *lpoints; 738 const PetscSFNode *rpoints; 739 PetscSFNode *rorntComp = NULL, *lorntComp = NULL; 740 PetscInt *numNeighbors, **neighbors, *locSupp = NULL; 741 PetscSFNode *nrankComp; 742 PetscBool *match, *flipped; 743 PetscBT flippedCells; 744 PetscInt *cellComp, *faceComp; 745 const PetscInt *cells = NULL, *faces = NULL; 746 PetscInt cStart = 0, cEnd = 0, fStart = 0, fEnd = 0; 747 PetscInt numLeaves, numRoots, dim, Ncomp, totNeighbors = 0; 748 PetscMPIInt rank, size; 749 PetscBool view, viewSync; 750 PetscViewer viewer = NULL, selfviewer = NULL; 751 752 PetscFunctionBegin; 753 PetscCall(PetscObjectGetComm((PetscObject)dm, &comm)); 754 PetscCallMPI(MPI_Comm_rank(comm, &rank)); 755 PetscCallMPI(MPI_Comm_size(comm, &size)); 756 PetscCall(PetscOptionsHasName(((PetscObject)dm)->options, ((PetscObject)dm)->prefix, "-orientation_view", &view)); 757 PetscCall(PetscOptionsHasName(((PetscObject)dm)->options, ((PetscObject)dm)->prefix, "-orientation_view_synchronized", &viewSync)); 758 759 if (cellIS) PetscCall(ISGetPointRange(cellIS, &cStart, &cEnd, &cells)); 760 if (faceIS) PetscCall(ISGetPointRange(faceIS, &fStart, &fEnd, &faces)); 761 PetscCall(DMGetPointSF(dm, &sf)); 762 PetscCall(PetscSFGetGraph(sf, &numRoots, &numLeaves, &lpoints, &rpoints)); 763 /* Truth Table 764 mismatch flips do action mismatch flipA ^ flipB action 765 F 0 flips no F F F 766 F 1 flip yes F T T 767 F 2 flips no T F T 768 T 0 flips yes T T F 769 T 1 flip no 770 T 2 flips yes 771 */ 772 PetscCall(DMGetDimension(dm, &dim)); 773 PetscCall(PetscBTCreate(cEnd - cStart, &flippedCells)); 774 PetscCall(PetscBTMemzero(cEnd - cStart, flippedCells)); 775 PetscCall(PetscCalloc2(cEnd - cStart, &cellComp, fEnd - fStart, &faceComp)); 776 /* 777 OLD STYLE 778 - Add an integer array over cells and faces (component) for connected component number 779 Foreach component 780 - Mark the initial cell as seen 781 - Process component as usual 782 - Set component for all seenCells 783 - Wipe seenCells and seenFaces (flippedCells can stay) 784 - Generate parallel adjacency for component using SF and seenFaces 785 - Collect Ncomp adj data from each proc to 0 786 - Build same serial graph 787 - Use same solver 788 - Use Scatterv to send back flipped flags for each component 789 - Negate flippedCells by component 790 791 NEW STYLE 792 - Create the adj on each process 793 - Bootstrap to complete graph on proc 0 794 */ 795 PetscCall(DMPlexOrient_Serial(dm, cellIS, faceIS, &Ncomp, cellComp, faceComp, flippedCells)); 796 if (view) { 797 PetscViewer v; 798 PetscInt cdepth = -1; 799 800 PetscCall(PetscViewerASCIIGetStdout(comm, &v)); 801 PetscCall(PetscViewerASCIIPushSynchronized(v)); 802 if (cEnd > cStart) PetscCall(DMPlexGetPointDepth(dm, cells ? cells[cStart] : cStart, &cdepth)); 803 PetscCall(PetscViewerASCIISynchronizedPrintf(v, "[%d]New Orientation %" PetscInt_FMT " cells (depth %" PetscInt_FMT ") and %" PetscInt_FMT " faces\n", rank, cEnd - cStart, cdepth, fEnd - fStart)); 804 PetscCall(PetscViewerASCIISynchronizedPrintf(v, "[%d]BT for serial flipped cells:\n", rank)); 805 PetscCall(PetscBTView(cEnd - cStart, flippedCells, v)); 806 PetscCall(PetscViewerFlush(v)); 807 PetscCall(PetscViewerASCIIPopSynchronized(v)); 808 } 809 /* Now all subdomains are oriented, but we need a consistent parallel orientation */ 810 // TODO: This all has to be rewritten to filter cones/supports to the ISes 811 if (numLeaves >= 0) { 812 PetscInt maxSuppSize, neighbor; 813 814 // Store orientations of boundary faces 815 PetscCall(DMPlexGetMaxSizes(dm, NULL, &maxSuppSize)); 816 PetscCall(PetscCalloc3(numRoots, &rorntComp, numRoots, &lorntComp, maxSuppSize, &locSupp)); 817 for (PetscInt f = fStart; f < fEnd; ++f) { 818 const PetscInt face = faces ? faces[f] : f; 819 const PetscInt *cone, *supp, *ornt; 820 PetscInt coneSize, suppSize, nind, c, Ns = 0; 821 822 PetscCall(DMPlexGetSupportSize(dm, face, &suppSize)); 823 PetscCall(DMPlexGetSupport(dm, face, &supp)); 824 for (PetscInt s = 0; s < suppSize; ++s) { 825 PetscInt ind, l; 826 827 // Filter support 828 ind = GetPointIndex(supp[s], cStart, cEnd, cells); 829 if (ind < 0) continue; 830 // Ignore overlapping cells 831 PetscCall(PetscFindInt(supp[s], numLeaves, lpoints, &l)); 832 if (l >= 0) continue; 833 locSupp[Ns++] = supp[s]; 834 } 835 PetscCheck(Ns < maxSuppSize, PETSC_COMM_SELF, PETSC_ERR_PLIB, "Index %" PetscInt_FMT " exceeds array size %" PetscInt_FMT, Ns, maxSuppSize); 836 if (Ns != 1) continue; 837 neighbor = locSupp[0]; 838 nind = GetPointIndex(neighbor, cStart, cEnd, cells); 839 PetscCall(DMPlexGetCone(dm, neighbor, &cone)); 840 PetscCall(DMPlexGetConeSize(dm, neighbor, &coneSize)); 841 PetscCall(DMPlexGetConeOrientation(dm, neighbor, &ornt)); 842 for (c = 0; c < coneSize; ++c) 843 if (cone[c] == face) break; 844 if (dim == 1) { 845 /* Use cone position instead, shifted to -1 or 1 */ 846 if (PetscBTLookup(flippedCells, nind)) rorntComp[face].rank = (PetscMPIInt)(1 - c * 2); 847 else rorntComp[face].rank = (PetscMPIInt)(c * 2 - 1); 848 } else { 849 if (PetscBTLookup(flippedCells, nind)) rorntComp[face].rank = ornt[c] < 0 ? -1 : 1; 850 else rorntComp[face].rank = ornt[c] < 0 ? 1 : -1; 851 } 852 rorntComp[face].index = faceComp[GetPointIndex(face, fStart, fEnd, faces)]; 853 } 854 // Communicate boundary edge orientations 855 PetscCall(PetscSFBcastBegin(sf, MPIU_SF_NODE, rorntComp, lorntComp, MPI_REPLACE)); 856 PetscCall(PetscSFBcastEnd(sf, MPIU_SF_NODE, rorntComp, lorntComp, MPI_REPLACE)); 857 } 858 /* Get process adjacency */ 859 PetscCall(PetscMalloc2(Ncomp, &numNeighbors, Ncomp, &neighbors)); 860 viewer = PETSC_VIEWER_STDOUT_(PetscObjectComm((PetscObject)dm)); 861 if (viewSync) PetscCall(PetscViewerASCIIPushSynchronized(viewer)); 862 PetscCall(PetscViewerGetSubViewer(viewer, PETSC_COMM_SELF, &selfviewer)); 863 for (PetscInt comp = 0; comp < Ncomp; ++comp) { 864 PetscInt n; 865 866 numNeighbors[comp] = 0; 867 PetscCall(PetscMalloc1(PetscMax(numLeaves, 0), &neighbors[comp])); 868 /* I know this is p^2 time in general, but for bounded degree its alright */ 869 for (PetscInt l = 0; l < numLeaves; ++l) { 870 const PetscInt face = lpoints[l]; 871 PetscInt find; 872 873 /* Find a representative face (edge) separating pairs of procs */ 874 find = GetPointIndex(face, fStart, fEnd, faces); 875 if ((find >= 0) && (faceComp[find] == comp) && rorntComp[face].rank) { 876 const PetscInt rrank = rpoints[l].rank; 877 const PetscInt rcomp = lorntComp[face].index; 878 879 for (n = 0; n < numNeighbors[comp]; ++n) 880 if ((rrank == rpoints[neighbors[comp][n]].rank) && (rcomp == lorntComp[lpoints[neighbors[comp][n]]].index)) break; 881 if (n >= numNeighbors[comp]) { 882 const PetscInt *supp; 883 PetscInt suppSize, Ns = 0; 884 885 PetscCall(DMPlexGetSupport(dm, face, &supp)); 886 PetscCall(DMPlexGetSupportSize(dm, face, &suppSize)); 887 for (PetscInt s = 0; s < suppSize; ++s) { 888 // Filter support 889 if (GetPointIndex(supp[s], cStart, cEnd, cells) >= 0) ++Ns; 890 } 891 PetscCheck(Ns == 1, PETSC_COMM_SELF, PETSC_ERR_ARG_WRONG, "Boundary face %" PetscInt_FMT " should see one cell, not %" PetscInt_FMT, face, Ns); 892 if (view) 893 PetscCall(PetscViewerASCIIPrintf(selfviewer, "[%d]: component %" PetscInt_FMT ", Found representative leaf %" PetscInt_FMT " (face %" PetscInt_FMT ") connecting to face %" PetscInt_FMT " on (%" PetscInt_FMT ", %" PetscInt_FMT ") with orientation %d\n", rank, comp, l, face, 894 rpoints[l].index, rrank, rcomp, (PetscMPIInt)lorntComp[face].rank)); 895 neighbors[comp][numNeighbors[comp]++] = l; 896 } 897 } 898 } 899 totNeighbors += numNeighbors[comp]; 900 } 901 PetscCall(PetscViewerRestoreSubViewer(viewer, PETSC_COMM_SELF, &selfviewer)); 902 if (viewSync) PetscCall(PetscViewerASCIIPopSynchronized(viewer)); 903 PetscCall(PetscMalloc2(totNeighbors, &nrankComp, totNeighbors, &match)); 904 for (PetscInt comp = 0, off = 0; comp < Ncomp; ++comp) { 905 for (PetscInt n = 0; n < numNeighbors[comp]; ++n, ++off) { 906 const PetscInt face = lpoints[neighbors[comp][n]]; 907 const PetscInt o = rorntComp[face].rank * lorntComp[face].rank; 908 909 if (o < 0) match[off] = PETSC_TRUE; 910 else if (o > 0) match[off] = PETSC_FALSE; 911 else 912 SETERRQ(PETSC_COMM_SELF, PETSC_ERR_ARG_WRONG, "Invalid face %" PetscInt_FMT " (%d, %d) neighbor: %" PetscInt_FMT " comp: %" PetscInt_FMT, face, (PetscMPIInt)rorntComp[face].rank, (PetscMPIInt)lorntComp[face].rank, neighbors[comp][n], comp); 913 nrankComp[off].rank = rpoints[neighbors[comp][n]].rank; 914 nrankComp[off].index = lorntComp[lpoints[neighbors[comp][n]]].index; 915 } 916 PetscCall(PetscFree(neighbors[comp])); 917 } 918 /* Collect the graph on 0 */ 919 if (numLeaves >= 0) { 920 Mat G; 921 PetscBT seenProcs, flippedProcs; 922 PetscInt *procFIFO, pTop, pBottom; 923 PetscInt *N = NULL, *Noff; 924 PetscSFNode *adj = NULL; 925 PetscBool *val = NULL; 926 PetscMPIInt *recvcounts = NULL, *displs = NULL, *Nc; 927 PetscMPIInt size = 0, iNcomp, itotNeighbors; 928 929 PetscCall(PetscCalloc1(Ncomp, &flipped)); 930 if (rank == 0) PetscCallMPI(MPI_Comm_size(comm, &size)); 931 PetscCall(PetscCalloc4(size, &recvcounts, size + 1, &displs, size, &Nc, size + 1, &Noff)); 932 PetscCallMPI(MPI_Gather(&Ncomp, 1, MPI_INT, Nc, 1, MPI_INT, 0, comm)); 933 for (PetscInt p = 0; p < size; ++p) displs[p + 1] = displs[p] + Nc[p]; 934 if (rank == 0) PetscCall(PetscMalloc1(displs[size], &N)); 935 PetscCall(PetscMPIIntCast(Ncomp, &iNcomp)); 936 PetscCallMPI(MPI_Gatherv(numNeighbors, iNcomp, MPIU_INT, N, Nc, displs, MPIU_INT, 0, comm)); 937 for (PetscInt p = 0, o = 0; p < size; ++p) { 938 recvcounts[p] = 0; 939 for (PetscInt c = 0; c < Nc[p]; ++c, ++o) recvcounts[p] += N[o]; 940 displs[p + 1] = displs[p] + recvcounts[p]; 941 } 942 if (rank == 0) PetscCall(PetscMalloc2(displs[size], &adj, displs[size], &val)); 943 PetscCall(PetscMPIIntCast(totNeighbors, &itotNeighbors)); 944 PetscCallMPI(MPI_Gatherv(nrankComp, itotNeighbors, MPIU_SF_NODE, adj, recvcounts, displs, MPIU_SF_NODE, 0, comm)); 945 PetscCallMPI(MPI_Gatherv(match, itotNeighbors, MPIU_BOOL, val, recvcounts, displs, MPIU_BOOL, 0, comm)); 946 PetscCall(PetscFree2(numNeighbors, neighbors)); 947 if (rank == 0) { 948 for (PetscInt p = 1; p <= size; ++p) Noff[p] = Noff[p - 1] + Nc[p - 1]; 949 if (view) { 950 for (PetscInt p = 0, off = 0; p < size; ++p) { 951 for (PetscInt c = 0; c < Nc[p]; ++c) { 952 PetscCall(PetscPrintf(PETSC_COMM_SELF, "Proc %" PetscInt_FMT " Comp %" PetscInt_FMT ":\n", p, c)); 953 for (PetscInt n = 0; n < N[Noff[p] + c]; ++n, ++off) PetscCall(PetscPrintf(PETSC_COMM_SELF, " edge (%d, %" PetscInt_FMT ") (%s):\n", (PetscMPIInt)adj[off].rank, adj[off].index, PetscBools[val[off]])); 954 } 955 } 956 } 957 /* Symmetrize the graph */ 958 PetscCall(MatCreate(PETSC_COMM_SELF, &G)); 959 PetscCall(MatSetSizes(G, Noff[size], Noff[size], Noff[size], Noff[size])); 960 PetscCall(MatSetUp(G)); 961 for (PetscInt p = 0, off = 0; p < size; ++p) { 962 for (PetscInt c = 0; c < Nc[p]; ++c) { 963 const PetscInt r = Noff[p] + c; 964 965 for (PetscInt n = 0; n < N[r]; ++n, ++off) { 966 const PetscInt q = Noff[adj[off].rank] + adj[off].index; 967 const PetscScalar o = val[off] ? 1.0 : 0.0; 968 969 PetscCall(MatSetValues(G, 1, &r, 1, &q, &o, INSERT_VALUES)); 970 PetscCall(MatSetValues(G, 1, &q, 1, &r, &o, INSERT_VALUES)); 971 } 972 } 973 } 974 PetscCall(MatAssemblyBegin(G, MAT_FINAL_ASSEMBLY)); 975 PetscCall(MatAssemblyEnd(G, MAT_FINAL_ASSEMBLY)); 976 977 PetscCall(PetscBTCreate(Noff[size], &seenProcs)); 978 PetscCall(PetscBTMemzero(Noff[size], seenProcs)); 979 PetscCall(PetscBTCreate(Noff[size], &flippedProcs)); 980 PetscCall(PetscBTMemzero(Noff[size], flippedProcs)); 981 PetscCall(PetscMalloc1(Noff[size], &procFIFO)); 982 pTop = pBottom = 0; 983 for (PetscInt p = 0; p < Noff[size]; ++p) { 984 if (PetscBTLookup(seenProcs, p)) continue; 985 /* Initialize FIFO with next proc */ 986 procFIFO[pBottom++] = p; 987 PetscCall(PetscBTSet(seenProcs, p)); 988 /* Consider each proc in FIFO */ 989 while (pTop < pBottom) { 990 const PetscScalar *ornt; 991 const PetscInt *neighbors; 992 PetscInt proc, nproc, seen, flippedA, flippedB, mismatch, numNeighbors; 993 994 proc = procFIFO[pTop++]; 995 flippedA = PetscBTLookup(flippedProcs, proc) ? 1 : 0; 996 PetscCall(MatGetRow(G, proc, &numNeighbors, &neighbors, &ornt)); 997 /* Loop over neighboring procs */ 998 for (PetscInt n = 0; n < numNeighbors; ++n) { 999 nproc = neighbors[n]; 1000 mismatch = PetscRealPart(ornt[n]) > 0.5 ? 0 : 1; 1001 seen = PetscBTLookup(seenProcs, nproc); 1002 flippedB = PetscBTLookup(flippedProcs, nproc) ? 1 : 0; 1003 1004 if (mismatch ^ (flippedA ^ flippedB)) { 1005 PetscCheck(!seen, PETSC_COMM_SELF, PETSC_ERR_ARG_WRONG, "Previously seen procs %" PetscInt_FMT " and %" PetscInt_FMT " do not match: Fault mesh is non-orientable", proc, nproc); 1006 if (!flippedB) { 1007 PetscCall(PetscBTSet(flippedProcs, nproc)); 1008 } else SETERRQ(PETSC_COMM_SELF, PETSC_ERR_ARG_WRONG, "Inconsistent mesh orientation: Fault mesh is non-orientable"); 1009 } else PetscCheck(!mismatch || !flippedA || !flippedB, PETSC_COMM_SELF, PETSC_ERR_ARG_WRONG, "Attempt to flip already flipped cell: Fault mesh is non-orientable"); 1010 if (!seen) { 1011 procFIFO[pBottom++] = nproc; 1012 PetscCall(PetscBTSet(seenProcs, nproc)); 1013 } 1014 } 1015 } 1016 } 1017 PetscCall(PetscFree(procFIFO)); 1018 PetscCall(MatDestroy(&G)); 1019 PetscCall(PetscFree2(adj, val)); 1020 PetscCall(PetscBTDestroy(&seenProcs)); 1021 } 1022 /* Scatter flip flags */ 1023 { 1024 PetscBool *flips = NULL; 1025 1026 if (rank == 0) { 1027 PetscCall(PetscMalloc1(Noff[size], &flips)); 1028 for (PetscInt p = 0; p < Noff[size]; ++p) { 1029 flips[p] = PetscBTLookup(flippedProcs, p) ? PETSC_TRUE : PETSC_FALSE; 1030 if (view && flips[p]) PetscCall(PetscPrintf(comm, "Flipping Proc+Comp %" PetscInt_FMT ":\n", p)); 1031 } 1032 for (PetscInt p = 0; p < size; ++p) displs[p + 1] = displs[p] + Nc[p]; 1033 } 1034 PetscCall(PetscMPIIntCast(Ncomp, &iNcomp)); 1035 PetscCallMPI(MPI_Scatterv(flips, Nc, displs, MPIU_BOOL, flipped, iNcomp, MPIU_BOOL, 0, comm)); 1036 PetscCall(PetscFree(flips)); 1037 } 1038 if (rank == 0) PetscCall(PetscBTDestroy(&flippedProcs)); 1039 PetscCall(PetscFree(N)); 1040 PetscCall(PetscFree4(recvcounts, displs, Nc, Noff)); 1041 PetscCall(PetscFree2(nrankComp, match)); 1042 1043 /* Decide whether to flip cells in each component */ 1044 for (PetscInt c = 0; c < cEnd - cStart; ++c) { 1045 if (flipped[cellComp[c]]) PetscCall(PetscBTNegate(flippedCells, c)); 1046 } 1047 PetscCall(PetscFree(flipped)); 1048 } 1049 if (view) { 1050 PetscViewer v; 1051 1052 PetscCall(PetscViewerASCIIGetStdout(comm, &v)); 1053 PetscCall(PetscViewerASCIIPushSynchronized(v)); 1054 PetscCall(PetscViewerASCIISynchronizedPrintf(v, "[%d]BT for parallel flipped cells:\n", rank)); 1055 PetscCall(PetscBTView(cEnd - cStart, flippedCells, v)); 1056 PetscCall(PetscViewerFlush(v)); 1057 PetscCall(PetscViewerASCIIPopSynchronized(v)); 1058 } 1059 // Reverse flipped cells in the mesh 1060 PetscViewer v; 1061 const PetscInt *degree = NULL; 1062 PetscInt *points; 1063 PetscInt pStart, pEnd; 1064 1065 if (view) { 1066 PetscCall(PetscViewerASCIIGetStdout(comm, &v)); 1067 PetscCall(PetscViewerASCIIPushSynchronized(v)); 1068 } 1069 PetscCall(DMPlexGetChart(dm, &pStart, &pEnd)); 1070 if (numRoots >= 0) { 1071 PetscCall(PetscSFComputeDegreeBegin(sf, °ree)); 1072 PetscCall(PetscSFComputeDegreeEnd(sf, °ree)); 1073 } 1074 PetscCall(PetscCalloc1(pEnd - pStart, &points)); 1075 for (PetscInt c = cStart; c < cEnd; ++c) { 1076 if (PetscBTLookup(flippedCells, c - cStart)) { 1077 const PetscInt cell = cells ? cells[c] : c; 1078 1079 PetscCall(DMPlexOrientPoint(dm, cell, -1)); 1080 if (degree && degree[cell]) points[cell] = 1; 1081 if (view) PetscCall(PetscViewerASCIISynchronizedPrintf(v, "[%d]Flipping cell %" PetscInt_FMT "%s\n", rank, cell, degree && degree[cell] ? " and sending to overlap" : "")); 1082 } 1083 } 1084 // Must propagate flips for cells in the overlap 1085 if (numRoots >= 0) { 1086 PetscCall(PetscSFBcastBegin(sf, MPIU_INT, points, points, MPI_SUM)); 1087 PetscCall(PetscSFBcastEnd(sf, MPIU_INT, points, points, MPI_SUM)); 1088 } 1089 for (PetscInt c = cStart; c < cEnd; ++c) { 1090 const PetscInt cell = cells ? cells[c] : c; 1091 1092 if (points[cell] && !PetscBTLookup(flippedCells, c - cStart)) { 1093 PetscCall(DMPlexOrientPoint(dm, cell, -1)); 1094 if (view) PetscCall(PetscViewerASCIISynchronizedPrintf(v, "[%d]Flipping cell %" PetscInt_FMT " through overlap\n", rank, cell)); 1095 } 1096 } 1097 if (view) { 1098 PetscCall(PetscViewerFlush(v)); 1099 PetscCall(PetscViewerASCIIPopSynchronized(v)); 1100 } 1101 PetscCall(PetscFree(points)); 1102 PetscCall(PetscBTDestroy(&flippedCells)); 1103 PetscCall(PetscFree2(numNeighbors, neighbors)); 1104 PetscCall(PetscFree3(rorntComp, lorntComp, locSupp)); 1105 PetscCall(PetscFree2(cellComp, faceComp)); 1106 PetscFunctionReturn(PETSC_SUCCESS); 1107 } 1108